Evidence Based Development of a Novel Lateral Fibula Plate (VariAx Fibula) Using a Real CT Bone Data Based Optimization Process During Device Development

Development of novel implants in orthopaedic trauma surgery is based on limited datasets of cadaver trials or artificial bone models. A method has been developed whereby implants can be constructed in an evidence based method founded on a large anatomic database consisting of more than 2.000 datasets of bones extracted from CT scans. The aim of this study was the development and clinical application of an anatomically pre-contoured plate for the treatment of distal fibular fractures based on the anatomical database. 48 Caucasian and Asian bone models (left and right) from the database were used for the preliminary optimization process and validation of the fibula plate. The implant was constructed to fit bilaterally in a lateral position of the fibula. Then a biomechanical comparison of the designed implant to the current gold standard in the treatment of distal fibular fractures (locking 1/3 tubular plate) was conducted. Finally, a clinical surveillance study to evaluate the grade of implant fit achieved was performed. The results showed that with a virtual anatomic database it was possible to design a fibula plate with an optimized fit for a large proportion of the population. Biomechanical testing showed the novel fibula plate to be superior to 1/3 tubular plates in 4-point bending tests. The clinical application showed a very high degree of primary implant fit. Only in a small minority of cases further intra-operative implant bending was necessary. Therefore, the goal to develop an implant for the treatment of distal fibular fractures based on the evidence of a large anatomical database could be attained. Biomechanical testing showed good results regarding the stability and the clinical application confirmed the high grade of anatomical fit.

Control of ventricular unloading using an electrocardiogram-synchronized Thoratec paracorporeal ventricular assist device

OBJECTIVE: Current pulsatile ventricular assist devices operate asynchronous with the left ventricle in fixed-rate or fill-to-empty modes because electrocardiogram-triggered modes have been abandoned. We hypothesize that varying the ejection delay in the synchronized mode yields more precise control of hemodynamics and left ventricular loading. This allows for a refined management that may be clinically beneficial. METHODS: Eight sheep received a Thoratec paracorporeal ventricular assist device (Thoratec Corp, Pleasanton, Calif) via ventriculo-aortic cannulation. Left ventricular pressure and volume, aortic pressure, pulmonary flow, pump chamber pressure, and pump inflow and outflow were recorded. The pump was driven by a clinical pneumatic drive unit (Medos Medizintechnik AG, Stolberg, Germany) synchronously with the native R-wave. The start of pump ejection was delayed between 0% and 100% of the cardiac period in 10% increments. For each of these delays, hemodynamic variables were compared with baseline data using paired t tests. RESULTS: The location of the minimum of stroke work was observed at a delay of 10% (soon after aortic valve opening), resulting in a median of 43% reduction in stroke work compared with baseline. Maximum stroke work occurred at a median delay of 70% with a median stroke work increase of 11% above baseline. Left ventricular volume unloading expressed by end-diastolic volume was most pronounced for copulsation (delay 0%). CONCLUSIONS: The timing of pump ejection in synchronized mode yields control over left ventricular energetics and can be a method to achieve gradual reloading of a recoverable left ventricle. The traditionally suggested counterpulsation is not optimal in ventriculo-aortic cannulation when maximum unloading is desired.

INTEGRATED MANAGEMENT OF THE INVASIVE SPECIES CIRSIUM ARVENSE, CANADA THISTLE, AND PHRAGMITES AUSTRALIS, COMMON REED: USING ECOLOGICALLY BASED CONTROL MEASURES AT EACH STAGE OF THE INVASION PROCESS

Invasive plant species threaten natural areas by reducing biodiversity and altering ecosystem functions. They also impact agriculture by reducing crop and livestock productivity. Millions of dollars are spent on invasive species control each year, and traditionally, herbicides are used to manage invasive species. Herbicides have human and environmental health risks associated with them; therefore, it is essential that land managers and stakeholders attempt to reduce these risks by utilizing the principles of integrated weed management. Integrated weed management is a practice that incorporates a variety of measures and focuses on the ecology of the invasive plant to manage it. Roadways are high risk areas that have high incidence of invasive species. Roadways act as conduits for invasive species spread and are ideal harborages for population growth; therefore, roadways should be a primary target for invasive species control. There are four stages in the invasion process which an invasive species must overcome: transport, establishment, spread, and impact. The aim of this dissertation was to focus on these four stages and examine the mechanisms underlying the progression from one stage to the next, while also developing integrated weed management strategies. The target species were Phragmites australis, common reed, and Cisrium arvense, Canada thistle. The transport and establishment risks of P. australis can be reduced by removing rhizome fragments from soil when roadside maintenance is performed. The establishment and spread of C. arvense can be reduced by planting particular resistant species, e.g. Heterotheca villosa, especially those that can reduce light transmittance to the soil. Finally, the spread and impact of C. arvense can be mitigated on roadsides through the use of the herbicide aminopyralid. The risks associated with herbicide drift produced by application equipment can be reduced by using the Wet-Blade herbicide application system.

DYNAMICS AND CONTROL OF REACTIVE DISTILLATION PROCESS FOR MONOMER SYNTHESIS OF POLYCARBONATE PLANTS

Polycarbonate (PC) is an important engineering thermoplastic that is currently produced in large industrial scale using bisphenol A and monomers such as phosgene. Since phosgene is highly toxic, a non-phosgene approach using diphenyl carbonate (DPC) as an alternative monomer, as developed by Asahi Corporation of Japan, is a significantly more environmentally friendly alternative. Other advantages include the use of CO2 instead of CO as raw material and the elimination of major waste water production. However, for the production of DPC to be economically viable, reactive-distillation units are needed to obtain the necessary yields by shifting the reaction-equilibrium to the desired products and separating the products at the point where the equilibrium reaction occurs. In the field of chemical reaction engineering, there are many reactions that are suffering from the low equilibrium constant. The main goal of this research is to determine the optimal process needed to shift the reactions by using appropriate control strategies of the reactive distillation system. An extensive dynamic mathematical model has been developed to help us investigate different control and processing strategies of the reactive distillation units to increase the production of DPC. The high-fidelity dynamic models include extensive thermodynamic and reaction-kinetics models while incorporating the necessary mass and energy balance of the various stages of the reactive distillation units. The study presented in this document shows the possibility of producing DPC via one reactive distillation instead of the conventional two-column, with a production rate of 16.75 tons/h corresponding to start reactants materials of 74.69 tons/h of Phenol and 35.75 tons/h of Dimethyl Carbonate. This represents a threefold increase over the projected production rate given in the literature based on a two-column configuration. In addition, the purity of the DPC produced could reach levels as high as 99.5% with the effective use of controls. These studies are based on simulation done using high-fidelity dynamic models.

A Measurement System Experiment to Evaluate the Nosing-to-nosing Method for Measuring Dimensions of Steps

Non-uniformity of steps within a flight is a major risk factor for falls. Guidelines and requirements for uniformity of step risers and tread depths assume the measurement system provides precise dimensional values. The state-of-the-art measurement system is a relatively new method, known as the nosing-to-nosing method. It involves measuring the distance between the noses of adjacent steps and the angle formed with the horizontal. From these measurements, the effective riser height and tread depth are calculated. This study was undertaken for the purpose of evaluating the measurement system to determine how much of total measurement variability comes from the step variations versus that due to repeatability and reproducibility (R&R) associated with the measurers. Using an experimental design quality control professionals call a measurement system experiment, two measurers measured all steps in six randomly selected flights, and repeated the process on a subsequent day. After marking each step in a flight in three lateral places (left, center, and right), the measurers took their measurement. This process yielded 774 values of riser height and 672 values of tread depth. Results of applying the Gage R&R ANOVA procedure in Minitab software indicated that the R&R contribution to riser height variability was 1.42%; and to tread depth was 0.50%. All remaining variability was attributed to actual step-to-step differences. These results may be compared with guidelines used in the automobile industry for measurement systems that consider R&R less than 1% as an acceptable measurement system; and R&R between 1% and 9% as acceptable depending on the application, the cost of the measuring device, cost of repair, or other factors.

Einsatz von RFID in der Pharmazeutischen Industrie

Die Radio Frequenz Identifikation (RFID) gilt als wichtigste technologische Neuerung in der Informationslogistik. Wird RFID in der produzierenden Industrie hauptsächlich zur Betriebsdaten-erfassung und im Handel zur Wareneingangs-/ Warenausgangskontrolle verwendet, so können ins-besondere in der Pharmazeutischen Industrie die Vorteile der Technologie voll ausgereizt werden. Die wohl wichtigste Anwendung ist die lückenlose Rückverfolgung entlang der Lieferkette, wie sie in den USA bereits in einigen Staaten für alle pharmazeutischen Produkte vorgeschrieben und auch in Deutschland für bestimmte Produkte erforderlich ist. Zudem können die RFID Transponder auf der Produktver-packung als fälschungssicheres Merkmal eingesetzt werden. Bei temperatursensiblen Produkten können Transponder mit zusätzlicher Sensorik zur Überwachung der Kühlkette dienen. Gleichzeitig kann der Transponder auch als Diebstahlsicherung im innerbetrieblichen Bereich sowie auch im Handel dienen und ermöglicht dabei eine höhere Sicherheit als die bisher eingesetzten 1-Bit Transponder. Die Trans-pondertechnologie kann außerdem den Barcode ganz oder teilweise ersetzen und so einen großen Beitrag zur Prozessautomatisierung leisten.

The Emergence of Formal Control Specificity in Information Systems Outsourcing: A Process-View

Information systems (IS) outsourcing projects often fail to achieve initial goals. To avoid project failure, managers need to design formal controls that meet the specific contextual demands of the project. However, the dynamic and uncertain nature of IS outsourcing projects makes it difficult to design such specific formal controls at the outset of a project. It is hence crucial to translate high-level project goals into specific formal controls during the course of a project. This study seeks to understand the underlying patterns of such translation processes. Based on a comparative case study of four outsourced software development projects, we inductively develop a process model that consists of three unique patterns. The process model shows that the performance implications of emergent controls with higher specificity depend on differences in the translation process. Specific formal controls have positive implications for goal achievement if only the stakeholder context is adapted, while they are negative for goal achievement if in the translation process tasks are unintendedly adapted. In the latter case projects incrementally drift away from their initial direction. Our findings help to better understand control dynamics in IS outsourcing projects. We contribute to a process theoretic understanding of IS outsourcing governance and we derive implications for control theory and the IS project escalation literature.

Knowledge spillover in Indian automobile industry : the process and the coverage

In India, as the production of passenger cars increased, many local small and medium enterprises (SMEs) entered the parts and components manufacturing sector. The sources of knowledge for large enterprises and SMEs are different. Naturally, spillover effects among large enterprises and between large enterprises and SMEs are different. This paper focuses on knowledge spillover among large enterprises and from large enterprises to SMEs. Subcontractor can absorb relation-specific skills through repeated interaction with parent company. The results of field survey emphasizes that relation-specific skills are a determinant factor of spillover effects from assemblers and large auto component manufacturers to SMEs. Econometric analysis shows that spillover effects among medium and large automobile units and from medium and large automobile units to small units went beyond boundary of cluster.

Caracterización Dinámica de Partículas Magnéticas y su Uso en Aplicaciones Biomédicas

El uso de las partículas magnéticas ha venido a más durante los últimos 10 años. Lo anterior ha estado condicionado por factores como la amplia investigación en materiales a nivel atómico, los retos propuestos por las diferentes áreas de investigación donde los niveles nanométricos cobran importancia, la inherente innovación tecnológica que pueden aportar a la industria dichas escalas y finalmente, el impacto socioeconómico que pueden tener estos avances tecnológicos. Sin embargo, la traslación a la industria de los avances tecnológicos se ha visto limitada por la falta de estrategias, ya que el 88% del conocimiento se queda en Universidades y Centros de Investigación y el resto, 12%, pasa a la industria o es obtenido en ella. En este trabajo de investigación se ha tratado de completar el círculo de idea, conceptualización, generación de conocimiento, prototipo, prueba in vitro y prueba in vivo; todo ello para dejar el menor espacio posible entre Investigación e Industria. Se ha fabricado un recinto que permite la observación del comportamiento de las partículas magnéticas cuando están inmersas en un medio con viscosidad controlada y con una fuente magnética estática. De la observación experimental se han encontrado fenómenos magnéticos como la aglomeración y la autoorganización, que han sido aprovechados, no solo para ofrecer una solución alternativa a la corrección del desprendimiento de retina, sino también para promover las mejoras de métodos de separación y/o filtrado celular, ayuda en correcciones ortopédicas o en el diagnóstico y tratamiento de enfermedades degenerativas. Particularizando en la corrección del desprendimiento de retina, se ha desarrollado y patentado un Dispositivo Ocular cuya función es la de tapón del agujero retiniano, ayudando en la cicatrización de la retina. Dicho dispositivo ha sido evaluado en conejos albinos neozelandeses obteniéndose un éxito en la reaplicación de la retina del 80% y resultando su toxicidad en condición difusa tras evaluación anatomopatológica. Así mismo, el ferrofluido diseñado y fabricado se ha localizado en la zona de interacción magnética siempre y su disposición ha sido en el mayor de los casos en forma de placa pero también se han formado anillos; lo anterior no ha afectado en ningún sentido el éxito en la reaplicación de la retina. Por otro lado, no se han encontrado indicios de siderosis en la zona de interacción magnética, sus alrededores o el resto del globo ocular; ni las células han presentado apoptosis inducida por los materiales introducidos en el ojo. Sin embargo, se ha encontrado una fuerte necrosis inducida por la presión ejercida sobre la retina por el dispositivo ocular, evidenciando la necesidad de un mejor control de dicha presión. Tras la caracterización de los copos y la presión que éstos ejercen, se ha podido identificar que el dispositivo ocular se puede sintonizar para inducir una presión entre 0.5 y 2.5 mmHg; por tanto se puede vislumbrar que es posible minimizar la muerte celular causada en las células retinianas. Finalmente, tras la experimentación con conejos se ha observado que el dispositivo ocular resuelve los problemas inducidos por las siliconas o los gases e inclusive aporta ventajas competitivas de alto valor añadido como: no requerir de posiciones incómodas en el post-operatorio, no modifica las propiedades ópticas del ojo ya que no es necesario dejar silicona o gases en el interior del ojo, se pueden sellar múltiples agujeros retinianos, corrección de desprendimiento de retina inferior sin complicaciones asociadas, etc.; en definitiva mejora la calidad de vida domiciliaria del paciente además de solventar los problemas inducidos por las soluciones actuales. The using of magnetic particles has become more important during last 10 years. This event has been conditioned by several factors like a wide researching on materials at atomic level, the challenges proposed by different research areas where nanometric levels became important, the inherent technological innovation to the industry and finally, the socioeconomic impact of these kinds of technologies. However, the nanotechnological advances have not been well addressed to the industry since 88% of the acknowledge keeps on Universities and Research Centers, and the remaining 12% goes through the industry or is obtained in it. In this research work, we have tried to complete the entire process about idea, concept, acknowledge generation, prototyping and in vitro and in vivo testing; all to leave as little space as possible between Research and Industry. We have built an experimental hall which allows us the observation of magnetic particles' behavior when are immersing in a controlled viscous medium and under a static magnetic field. The experimental observation has been useful to identify and use two magnetic phenomena: agglomeration and self-organization; no only for retinal detachment, but also to improve cellular separation and/or filtered methods, orthopedic solutions or the diagnostic and treatment of degenerative diseases. Particularizing on retinal detachment, we have developed and patented an Ocular Device which its function is acting like a tampon of the retinal hole for helping with the scarring retina. The device has been evaluated in animals and the results show that we can achieve a success of 80% before rabbit’s death and non cell apoptosis, only necrosis, over the retina attached by the ocular device after anatomopathological evaluation. Also we have identified a diffuse toxicity after anatomopathological evaluation, so more experimenting must be proposed. Otherwise, the ferrofluid has been localized where the magnetic interaction area is located and its deposition has been in most cases plaque shape like but rings have also been observed; this has not affected in any way the successful reattachment of the retina. On the other hand, we have not found any evidence of siderosis in the magnetic interaction zone, near of or some other place of the ocular globe; and we did not find any apoptosis induced by the materials inserted within the eye. However full necrosis, exactly on the magnetic interaction zone, has been found and induced by the pressure exerted over the retina by the ocular device, evidencing the needing of its better control. After flakes’ characterization and its pressure exerted, we identified that the ocular device can be tuned in order to induce a pressure between 0.5 and 2.5 mmHg; therefore we can perceive that death caused to the retinal cells can be minimized. Finally, the experimentation has shown that the ocular device solves all problems induced by silicone or gases an even contributes with some other competitive advantages of high added value like: no uncomfortable postoperative positions, it does not modify any optical property of the eye because there is no needing of leaving silicone or gases inside the eye, many holes can be sealed, the inferior retinal detachment can be solve without any complications, etc.; definitively the ocular device improves patients’ quality of life.

Interactive Graphic Simulation: An Advanced Methodology to Improve the Teaching-Learning Process in Nuclear Engineering Education and Training

Nowadays, computer simulators are becoming basic tools for education and training in many engineering fields. In the nuclear industry, the role of simulation for training of operators of nuclear power plants is also recognized of the utmost relevance. As an example, the International Atomic Energy Agency sponsors the development of nuclear reactor simulators for education, and arranges the supply of such simulation programs. Aware of this, in 2008 Gas Natural Fenosa, a Spanish gas and electric utility that owns and operate nuclear power plants and promotes university education in the nuclear technology field, provided the Department of Nuclear Engineering of Universidad Politécnica de Madrid with the Interactive Graphic Simulator (IGS) of “José Cabrera” (Zorita) nuclear power plant, an industrial facility whose commercial operation ceased definitively in April 2006. It is a state-of-the-art full-scope real-time simulator that was used for training and qualification of the operators of the plant control room, as well as to understand and analyses the plant dynamics, and to develop, qualify and validate its emergency operating procedures.

A portable NIR device for the optical supervision of milk coagulation process

The coagulation of milk is the fundamental process in cheese-making, based on a gel formation as consequence of physicochemical changes taking place in the casein micelles, the monitoring the whole process of milk curd formation is a constant preoccupation for dairy researchers and cheese companies (Lagaude et al., 2004). In addition to advances in composition-based applications of near infrared spectroscopy (NIRS), innovative uses of this technology are pursuing dynamic applications that show promise, especially in regard to tracking a sample in situ during food processing (Bock and Connelly, 2008). In this way the literature describes cheese making process applications of NIRS for curd cutting time determination, which conclude that NIRS would be a suitable method of monitoring milk coagulation, as shown i.e. the works published by Fagan et al. (Fagan et al., 2008; Fagan et al., 2007), based in the use of the commercial CoAguLite probe (with a LED at 880nm and a photodetector for light reflectance detection).

Advanced predictive quality control strategy involving different facilities

There are many industries that use highly technological solutions to improve quality in all of their products. The steel industry is one example. Several automatic surface-inspection systems are used in the steel industry to identify various types of defects and to help operators decide whether to accept, reroute, or downgrade the material, subject to the assessment process. This paper focuses on promoting a strategy that considers all defects in an integrated fashion. It does this by managing the uncertainty about the exact position of a defect due to different process conditions by means of Gaussian additive influence functions. The relevance of the approach is in making possible consistency and reliability between surface inspection systems. The results obtained are an increase in confidence in the automatic inspection system and an ability to introduce improved prediction and advanced routing models. The prediction is provided to technical operators to help them in their decision-making process. It shows the increase in improvement gained by reducing the 40 % of coils that are downgraded at the hot strip mill because of specific defects. In addition, this technology facilitates an increase of 50 % in the accuracy of the estimate of defect survival after the cleaning facility in comparison to the former approach. The proposed technology is implemented by means of software-based, multi-agent solutions. It makes possible the independent treatment of information, presentation, quality analysis, and other relevant functions.