Small bowel injury associated to allergy is triggered by platelet-activating factor, mast cells, neutrophils and protected by nitric oxide

Allergy to components of the diet is followed by gut inflammation which in children, sometimes progress to mucosal lesions and anaphylaxis. In newborns suffering of cow`s milk allergy, bloody stools, rectal. bleeding and ulcerations are found. The rat systemic anaphylaxis is a suitable model to study the intestinal lesions associated to allergy. In the present study we used this model to investigate some mechanisms involved. We found that 15 min after antigen challenge of sensitized rats, hemorrhagic lesions develop in the small intestine. The lesions were more severe in jejunum and ileum compared to duodenum. Pretreatment of the rats with a platelet-activating factor-receptor antagonist (WEB-2170) reduced the lesions whereas inhibition of endogenous nitric oxide by L-NAME, greatly increased the hemorrhagic lesions and mortality. Both, lesions and mortality were reversed by L-arginine. The hemorrhagic lesions were also significantly reduced by the mast cell stabilizers, disodium cromoglycate and ketotifen as well as by neutrophils depletion (with anti-PMN antibodies) or inhibition of selectin binding (by treatment with fucoidan). Thus, the intestinal hemorrhagic lesions in this model are dependent on ptatelet-activating factor, mast cell granule-derived mediators and neutrophils. Endogenous nitric oxide and supplementation with L-arginine has a protective role, reducing the lesions and preventing mortality. These results contributed to elucidate mechanisms involved in intestinal lesions which could be of relevance to human small bowel injury associated to allergy. (c) 2007 Elsevier B.V. All rights reserved.

Isosorbide Polyesters from Enzymatic Catalysis

The synthesis of isosorbide aliphatic polyesters is demonstrated by the use of Novozym 435, a catalyst consisting of Candida antarctica lipase B immobilized on a macroporous support Several experimental procedures were tested and azeotropic distillation was most effective in removing low mass byproduct Furthermore, the use of diethyl ester derivatives of diacid comonomers gave isosorbide copolyesters with highest Isolated yield and molecular weights The length of the diacid aliphatic chain was less restrictive, but with a clear preference for longer aliphatic chains The molecular mass values of the obtained products were equivalent or higher than those obtained by nonenzymatic polymerizations, a clear illustration of the potential of enzymatic over conventional catalysis The ability of Novozym 435 to catalyze the synthesis of isosorbide polyester with weight-average molecular weights in excess of 40000 Da was unexpected given that isosorbide has two chemically distinct secondary hydroxyl groups This is the first example in which isosorbide polyesters were synthesized by enzyme catalysis, opening a large array of possibilities for this important class of biomass-derived building blocks Because these polymers are potential biomaterials the total absence of conventional Lewis acid catalyst residues represents a major Improvement in the toxicity of the material

Subsídios para a gestão dos planos de aplicação de vinhaça (PAV): um estudo de caso da região de Piracicaba

Concomitantemente à produção de etanol, a partir da fermentação de diferentes matérias-primas (cana-de-açúcar, beterraba, milho, trigo, batata, mandioca), produz-se a vinhaça. A vinhaça da cana-de-açúcar é gerada na proporção média de 12 litros para cada litro de etanol. O Brasil é o maior produtor mundial de cana-de-açúcar (570 milhões de toneladas, em 2009) com a produção de 27 bilhões de litros/ano de etanol, no ciclo 2009/2010, basicamente para fins carburantes, e, portanto, a quantidade de vinhaça produzida é da ordem de 320 bilhões de litros/ano. Dentre as possíveis soluções para a destinação da vinhaça, tais como: concentração, tratamento químico e biológico ou produção de biomassa, é sua aplicação no solo a forma mais usual de disposição. No entanto, sua aplicação no solo não pode ser excessiva nem indiscriminada, sob pena de comprometer o ambiente e a rentabilidade agrícola e industrial da unidade sucroalcooleira. A necessidade de medidas de controle sobre a aplicação de vinhaça no solo do Estado de São Paulo, que concentra a produção de 60% do etanol produzido no Brasil, levou à elaboração da Norma Técnica P4.231, em 2005. A constatação do cumprimento dos itens desta Norma é uma das ações do agente fiscalizador, no monitoramento da geração e destinação da vinhaça pelos empreendimentos produtores de etanol. Os itens 5.7.1 e 5.7.2, desta Norma, tornam obrigatório o encaminhamento à CETESB (Companhia Ambiental do Estado de São Paulo), para fins de acompanhamento e fiscalização, até o dia 02 de abril de cada ano, o PAV (Plano de Aplicação de Vinhaça). Com o intuito de proporcionar melhor entendimento da Norma P4.231, contribuir para otimização de sua aplicabilidade e melhoria e perceber a realidade prática da aplicação da vinhaça, foram analisados PAVs protocolados na Agência Ambiental de Piracicaba, licenças concedidas, processos de licenciamento e realizadas vistorias a campo. Conclui-se que a Norma P4.231 representa um avanço no gerenciamento do uso da vinhaça no Estado de São Paulo, por disciplinar a disposição de vinhaça no solo, tornando obrigatórios: demarcações de áreas protegidas e núcleos populacionais, caracterização de solo e da vinhaça, doses máximas a serem aplicadas, estudos da geologia e hidrogeologia locais, monitoramento das águas subterrâneas, impermeabilização de tanques e dutos. Estabelece critérios a serem obedecidos por lei, e todos são condutas de boas práticas de proteção ao meio, que repercutem em maior rentabilidade agrícola e industrial. A Norma P4.231 é bem elaborada, complexa e extensa, o que a torna de difícil execução. Para facilitar sua aplicabilidade, sugere-se o estabelecimento de um cronograma de prioridades: impermeabilização dos tanques e dutos, drenos testemunha com funcionamento otimizado e boa caracterização do que está sendo aplicado, se vinhaça pura ou se misturada a águas residuárias. Das oito empresas deste estudo, apenas quatro (as maiores) vêm protocolando os PAVs com regularidade, desde 2005. As informações apresentadas foram incompletas e, em alguns casos, precárias. Mesmo com lacunas, os dados fornecidos, desde o início da obrigatoriedade do PAV, foram de utilidade para esboçar o perfil da atividade sucroalcooleira na região estudada.

Potencial de produção de cana-energia em áreas agrícolas marginais no Brasil

A descoberta e utilização do petróleo provocaram significativas mudanças na sociedade ao longo do tempo, sendo ele um dos mais importantes fatores de transformação socioambiental e cultural no mundo ao longo do ultimo século. Sua grande gama de possibilidades de utilização acabou criando um sistema de produção baseado em um único agente energético, principalmente nos países que não possuem recursos hídricos nem outras fontes renováveis. Porém, nas ultimas décadas do século passado, começaram a surgir inúmeras discussões sobre a necessidade de se alterar a composição da matriz energética global. Como resultados das preocupações quanto à escassez daquele recurso natural, vários pesquisadores direcionaram seus estudos para a busca de alternativas que pudessem de forma sustentável se prestar como substituto ao petróleo. Uma delas seria o uso de biomassa, de forma a aproveitar a capacidade das plantas em transformar a energia solar em carbohidratos. O Brasil, além de possuir uma das matrizes energéticas mais diversificadas e limpas do mundo, possui grande extensão de terras agricultáveis o que o coloca em lugar de destaque quanto ao potencial de produção de culturas agroenergéticas. Considerando as características da cana-de-açúcar e a sua adaptação a áreas de cultivo do Brasil e impulsionados pela demanda de produção de biomassa moderna, a ser aplicada em processos de transformação mais complexos e que possibilitem a obtenção de outros produtos além de açúcar, álcool e energia, estudou-se neste trabalho plantas de cana-de-açúcar melhoradas com a finalidade exclusiva de produzir biomassa moderna, a chamada “cana- energia”. Esta é uma planta que, contrariamente à tradicional cana-de-açúcar, melhorada para produzir sacarose, é direcionada para produzir fibra, e que, além disso, por possuir maior participação de espécies ancestrais de maior rusticidade, estão aptas a suportar condições ambientais mais estressantes. Os resultados obtidos demonstraram que os híbridos de cana-energia apresentam grande potencial de produção de biomassa e massa seca por área, a custos altamente competitivos considerando as análises comparativas de custo de produção de massa seca por área. Quanto a produção foi possível observar que além de ser mais produtiva em primeiro corte, nos resultados de colheita de soqueira (segundo corte), o melhor híbrido de cana- energia chegou a produzir uma vez e meia mais massa seca que a cana-de-açúcar tradicional, e apresentou maiores produtividades que outras culturas energéticas tais como o eucalipto e o capim-elefante, sendo que, considerando as produtividades médias observadas, a partir do terceiro corte com estes níveis de produtividade, a cana-energia passa a ser a matéria prima de mais baixo custo de produção de massa seca por área, denotando o seu alto potencial como matéria prima para a produção de bioenergia. No Zoneamento agroecológico realizado para a cana energia foi possível identificar 32,3 milhões de hectares de áreas de produção agrícola marginais aptas ao cultivo deste material, sendo que de acordo com os resultados do zoneamento agrícola e as características das regiões em estudos, identifica-se que deste total, pode-se considerar que os materiais que se destacaram em produtividade neste estudo, apresentam boas condições de ocupar uma área de 2,0 a 8,0 milhões de hectares.

Avaliação da produtividade de biomassa de capim elefante e sorgo sacarino no Estado do Ceará para uso energético

Com a crescente elevação nas possibilidades de utilização da biomassa nos mais diversos setores da indústria, o presente estudo visa identificar uma alternativa para aumentar a produção utilizando, para tanto, o capim elefante (Pennisetum purpureum) e sorgo sacarino (Sorghum bicolor L.). Os experimentos foram realizados na Fazenda Vitória (4°21'36"S 38°5'17"W) em Beberibe – CE, em uma área total de 1.944 m2. A semeadura foi realizada em 36 parcelas de 54 m2, em delineamento inteiramente casualizado, sendo 9 tratamentos (genótipos) e 4 repetições. Foram utilizados seis diferentes genótipos de sorgo sacarino, s_1, s_2, s_3, s_4, s_5 e s_6. Fazem parte do estudo, ainda, um híbrido de capim elefante e milheto (Pennisetum glaucum), comercialmente conhecido como paraíso, e dois tratamentos de capim elefante, Cameroon e Napier. Para o sorgo sacarino, foram realizadas três colheitas, a primeira avaliada semanalmente e as demais com avaliação única. Para o capim elefante foram realizadas duas colheitas, a primeira com intervalo de 186 dias e a segunda com intervalo de 92 dias. Esse intervalo possibilitou a comparação da produtividade de biomassa de cada tratamento de forma trimestral e semestral. Os resultados observados mostraram que os tratamentos de maior destaque de produtividade de biomassa (base seca) foram com capim elefante, independente do período. Com base nessas informações, concluiu-se que, analisando apenas a produtividade de biomassa, o mais indicado dos tratamentos estudados é o capim elefante Napier ou Cameroon. No entanto, constatou-se que o sorgo sacarino apresentou grande potencial de produtividade com um aditivo, seu mosto pode ser utilizado no processo de fermentação para obtenção do etanol.

Influência dos fatores abióticos sobre a variação espaço-temporal de paralonchurus brasiliensis (Steindachner, 1875) (pisces, sciaenidae) componente da fauna acompanhante da pesca de camarões no litoral Norte de São Paulo

Knowledge of the environmental factors influence on the spatial-temporal variation of fishes is important to fisheries management and conservation. Thus, the aim of this work was to analyze the influence of the abiotical factors on the spatial-temporal distribution of Paralonchurus brasiliensis (Pisces, Sciaenidae) caught by-catch with the shrimp fishing of Ubatuba and Caraguatatuba regions, north coast of São Paulo State. The fishes were captured every month from January to December 2002. Samples were collected by otter trawl at 5, 10, 15, 20, 25, 30 and 35m depths. The temperatures (surface and bottom), salinities (surface and bottom), sediment features and organic matters were verified for each depth. During all period of the study 12.642 specimens of P. brasiliensis were captured at Ubatuba and 17.166 at Caraguatatuba, which totalized the biomass of 267 for the first and 339kg for the other region. The females outnumbered males in fish population. The greatest values of biomass and number of individuals were registered at the summer and autumn seasons, while the lowest values were observed at the winter and spring seasons. The greatest abundances were found from 15 to 25m depth. In this study, it was verified that P. brasiliensis is a coastal waters associate species. The spatialtemporal distribution of P. brasiliensis is affected by intrusion of SACW and depth for the coastal region and by depth and sediment in sheltered areas such as Caraguatatuba

Genotoxicidade e composição do material particulado emitido pela queima de Biomassa: um estudo de caso em Tangará da Serra, Região da Amazônia Brasileira

Tangara da Serra is located on southwestern Mato Grosso and is found to be on the route of pollutants dispersion originated in the Legal Amazon s deforestation area. This region has also a wide area of sugarcane culture, setting this site quite exposed to atmospheric pollutants. The objective of this work was to evaluate the genotoxicity of three different concentrations of organic particulate matter which was collected from August through December / 2008 in Tangara da Serra, using micronucleus test in Tradescantia pallida (Trad-MCN). The levels of particulate matter less than 10μm (MP10) and black carbon (BC) collected on the Teflon and polycarbonate filters were determined as well. Also, the alkanes and polycyclic aromatic hydrocarbons (PAHs) were identified and quantified on the samples from the burning period by gas chromatography detector with flame ionization detection (GC-FID). The results from the analyzing of alkanes indicate an antropic influence. Among the PAHs, the retene was the one found on the higher quantity and it is an indicator of biomass burning. The compounds indene(1,2,3-cd)pyrene and benzo(k)fluoranthene were identified on the samples and are considered to be potentially mutagenic and carcinogenic. By using Trad-MCN, it was observed a significant increase on the micronucleus frequency during the burning period, and this fact can be related to the mutagenic PAHs which were found on such extracts. When the period of less burnings is analyzed and compared to the negative control group, it was noted that there was no significant difference on the micronuclei rate. On the other hand, when the higher burning period is analyzed, statistically significant differences were evident. This study showed that the Trad-MCN was sensible and efficient on evaluating the genotoxicity potencial of organic matter from biomass burning, and also, emphasizes the importance of performing a chemical composition analysis in order to achieve a complete diagnosis on environmental risk control

Adição do resíduo de biomassa da cana-de-açúcar em pastas para cimentação de poços petrolíferos produtores de óleos pesados

The Potiguar basin has large fields of viscous oil where the used method for recovering is based on vapor injection; this operation is carried out by injecting vapor in the oilwell directly, without the protection of a revetment through thermal insulation, what causes its dilation and, consequently, cracks in the cement placed on the annular, and lost of hydraulic insulation; this crack is occasioned by the phenomenon of retrogression of the compressive resistance due to the conversion of the hydrated calcium silicate in phases calcium-rich, caused by the high temperatures in the wells, subjected to thermal recuperation. This work has evaluated the application of composite pastes with addition of residue of biomass of ground sugar-cane bagasse as anti-retrogression mineral admixture for cementation of oil-wells subjected to thermal recuperation. The addition of the mineral residue was carried out considering a relative amount of 10, 20, 30, 40 and 59% in relation to cement mass, trying to improve the microstructure of the paste, still being developed a reference paste only with cement and a paste with addition of 40% of silica flour - renowned material in the oil industry as anti-retrogression additive. Pozzolanic activity of the ash was evaluated through XRD, TG/DTG, as the resistance to compression, and it was also determined the physical and mechanical behavior of the pastes when submitted to cure at low temperatures (22 and 38º C); besides it was evaluated the behavior of the pastes when submitted to two cycles of cure at high temperature (280ºC) and pressure (7 MPa). It was verified that the ash of the sugar-cane biomass presents pozzolanic reaction and has great efficiency in decrease the permeability of the paste by filler effect, as well as that addition of ash in a relative amount of 10, 20 e 30% increases cured compressive resistance at low temperatures. It was also showed that the ash in a relative amount of 40% and 59% has very significant efficiency as anti-retrogression additive, since it prevents the decrease of compressive resistance and forms hydrated calcium silicate type xenotlita and tobermorita which have more resistance and stability in high temperatures

Preparação e caracterização de catalisadores à base de titânio suportado em MCM-41 para produção de compostos oxigenados através da pirólise catalítica do capim elefante

In recent years, the area of advanced materials has been considerably, especially when it comes to materials for industrial use, such as is the case with structured porosity of catalysts suitable for catalytic processes. The use of catalysts combined with the fast pyrolysis process is an alternative to the oxygenate production of high added value, because, in addition to increasing the yield and quality of products, allows you to manipulate the selectivity to a product of interest, and therefore allows greater control over the characteristics of the final product. Based on these arguments, in this work were prepared titanium catalysts supported on MCM-41 for use in catalytic pyrolysis of biomass, called elephant grass. The reactions of pyrolysis of biomass were performed in a micro pyrolyzer, Py-5200, coupled to GC / MS, the company CDS Corporation, headquartered in the United States. The catalysts Ti-MCM-41 in different molar ratios were characterized by XRD, TG / DTG, FT-IR, SEM, XRF, UV-visible adsorption of nitrogen and the distribution of particle diameter and specific surface area measurement by the BET method. From the catalytic tests it was observed that the catalysts synthesized showed good results for the pyrolysis reaction.The main products were obtained a higher yield of aldehydes, ketones and furan. It was observed that the best reactivity is a direct function of the ratio Si/Ti, nature and concentration of the active species on mesoporous supports. Among the catalysts Ti-MCM-41 (molar ratio Si / Ti = 25 and 50), the ratio Si / Ti = 25 (400 ° C and 600 ° C) favored the cracking of oxygenates such as acids , aldehydes, ketones, furans and esters. Already the sample ratio Si / Ti = 50 had the highest yield of aromatic oxygenates

Análise de um queimador infravermelho funcionando com combustível híbrido : GLP/Bio-óleo

Biomass is considered the largest renewable energy source that can be used in an environmentally sustainable. From the pyrolysis of biomass is possible to obtain products with higher energy density and better use properties. The liquid resultant of this process is traditionally called bio-oil. The use of infrared burners in industrial applications has many advantages in terms of technical-operational, for example, uniformity in the heat supply in the form of radiation and convection, with a greater control of emissions due to the passage of exhaust gases through a macroporous ceramic bed. This paper presents a commercial infrared burner adapted with an ejector proposed able to burn a hybrid configuration of liquefied petroleum gas (LPG) and bio-oil diluted. The dilution of bio-oil with absolute ethanol aimed to decrease the viscosity of the fluid, and improving the stability and atomization. It was introduced a temperature controller with thermocouple modulating two stages (low heat / high heat), and solenoid valves for fuels supply. The infrared burner has been tested, being the diluted bio-oil atomized, and evaluated its performance by conducting energy balance. The method of thermodynamic analysis to estimate the load was used an aluminum plate located at the exit of combustion gases and the distribution of temperatures measured by thermocouples. The dilution reduced the viscosity of the bio-oil in 75.4% and increased by 11% the lower heating value (LHV) of the same, providing a stable combustion to the burner through the atomizing with compressed air and burns combined with LPG. Injecting the hybrid fuel there was increase in the heat transfer from the plate to the environment in 21.6% and gain useful benefit of 26.7%, due to the improved in the efficiency of the 1st Law of Thermodynamics of infrared burner

Pirólise termoquímica de pós da fibra de coco seco em um reator de cilindro rotativo para produção de bio-óleo

This master thesis aims at developing a new methodology for thermochemical degradation of dry coconut fiber (dp = 0.25mm) using laboratory rotating cylinder reactor with the goal of producing bio-oil. The biomass was characterized by infrared spectroscopy with Fourier transform FTIR, thermogravimetric analysis TG, with evaluation of activation energy the in non-isothermal regime with heating rates of 5 and 10 °C/min, differential themogravimetric analysis DTG, sweeping electron microscopy SEM, higher heating value - HHV, immediate analysis such as evaluated all the amounts of its main constituents, i.e., lignin, cellulose and hemicelluloses. In the process, it was evaluated: reaction temperature (450, 500 and 550oC), carrier gas flow rate (50 and 100 cm³/min) and spin speed (20 and 25 Hz) to condensate the bio-oil. The feed rate of biomass (540 g/h), the rotation of the rotating cylinder (33.7 rpm) and reaction time (30 33 min) were constant. The phases obtained from the process of pyrolysis of dry coconut fiber were bio-oil, char and the gas phase non-condensed. A macroscopic mass balance was applied based on the weight of each phase to evaluate their yield. The highest yield of 20% was obtained from the following conditions: temperature of 500oC, inert gas flow of 100 cm³/min and spin speed of 20 Hz. In that condition, the yield in char was 24.3%, non-condensable gas phase was 37.6% and losses of approximately 22.6%. The following physicochemical properties: density, viscosity, pH, higher heating value, char content, FTIR and CHN analysis were evaluated. The sample obtained in the best operational condition was subjected to a qualitative chromatographic analysis aiming to know the constituents of the produced bio-oil, which were: phenol followed by sirigol, acetovanilona and vinyl guaiacol. The solid phase (char) was characterized through an immediate analysis (evaluation of moisture, volatiles, ashes and fixed carbon), higher heating value and FTIR. The non-condensing gas phase presented as main constituents CO2, CO and H2. The results were compared to the ones mentioned by the literature.

Desenvolvimento de uma unidade pirolítica com reator de cilindro rotativo: obtenção de bio-óleo

The demand for alternative sources of energy drives the technological development so that many fuels and energy conversion processes before judged as inadequate or even non-viable, are now competing fuels and so-called traditional processes. Thus, biomass plays an important role and is considered one of the sources of renewable energy most important of our planet. Biomass accounts for 29.2% of all renewable energy sources. The share of biomass energy from Brazil in the OIE is 13.6%, well above the world average of participation. Various types of pyrolysis processes have been studied in recent years, highlighting the process of fast pyrolysis of biomass to obtain bio-oil. The continuous fast pyrolysis, the most investigated and improved are the fluidized bed and ablative, but is being studied and developed other types in order to obtain Bio-oil a better quality, higher productivity, lower energy consumption, increased stability and process reliability and lower production cost. The stability of the product bio-oil is fundamental to designing consumer devices such as burners, engines and turbines. This study was motivated to produce Bio-oil, through the conversion of plant biomass or the use of its industrial and agricultural waste, presenting an alternative proposal for thermochemical pyrolysis process, taking advantage of particle dynamics in the rotating bed that favors the right gas-solid contact and heat transfer and mass. The pyrolyser designed to operate in a continuous process, a feeder containing two stages, a divisive system of biomass integrated with a tab of coal fines and a system of condensing steam pyrolytic. The prototype has been tested with sawdust, using a complete experimental design on two levels to investigate the sensitivity of factors: the process temperature, gas flow drag and spin speed compared to the mass yield of bio-oil. The best result was obtained in the condition of 570 oC, 25 Hz and 200 cm3/min, temperature being the parameter of greatest significance. The mass balance of the elementary stages presented in the order of 20% and 37% liquid pyrolytic carbon. We determined the properties of liquid and solid products of pyrolysis as density, viscosity, pH, PCI, and the composition characterized by chemical analysis, revealing the composition and properties of a Bio-oil.

Pirólise rápida catalítica do capim elefante utilizando materiais mesoporosos e óxidos metálicos para deoxigenação em bio-óleo

The fast pyrolysis of lignocellulosic biomass is a thermochemical conversion process for production energy which have been very atratactive due to energetic use of its products: gas (CO, CO2, H2, CH4, etc.), liquid (bio-oil) and charcoal. The bio-oil is the main product of fast pyrolysis, and its final composition and characteristics is intrinsically related to quality of biomass (ash disposal, moisture, content of cellulose, hemicellulose and lignin) and efficiency removal of oxygen compounds that cause undesirable features such as increased viscosity, instability, corrosiveness and low calorific value. The oxygenates are originated in the conventional process of biomass pyrolysis, where the use of solid catalysts allows minimization of these products by improving the bio-oil quality. The present study aims to evaluate the products of catalytic pyrolysis of elephant grass (Pennisetum purpureum Schum) using solid catalysts as tungsten oxides, supported or not in mesoporous materials like MCM-41, derived silica from rice husk ash, aimed to reduce oxygenates produced in pyrolysis. The biomasss treatment by washing with heated water (CEL) or washing with acid solution (CELix) and application of tungsten catalysts on vapors from the pyrolysis process was designed to improve the pyrolysis products quality. Conventional and catalytic pyrolysis of biomass was performed in a micro-pyrolyzer, Py-5200, coupled to GC/MS. The synthesized catalysts were characterized by X ray diffraction, infrared spectroscopy, X ray fluorescence, temperature programmed reduction and thermogravimetric analysis. Kinetic studies applying the Flynn and Wall model were performed in order to evaluate the apparent activation energy of holoceluloce thermal decomposition on samples elephant grass (CE, CEL and CELix). The results show the effectiveness of the treatment process, reducing the ash content, and were also observed decrease in the apparent activation energy of these samples. The catalytic pyrolysis process converted most of the oxygenate componds in aromatics such as benzene, toluene, ethylbenzene, etc

Variação temporal da riqueza de táxons, abundância e biomassa de artrópodes em ambiente de restinga do Rio Grande do Norte, Brasil

Arthropods are abundant organisms possess great wealth and diversity representing about 82% of all known animal species. Contribute as a source of biomass and their abundance is an indicator of ecological change. The aim of this study was to evaluate the biomass and abundance found in the salt marsh environment throughout the year and relate them to the climatic factors (temperature, precipitation and relative humidity) that can influence the abundance and biomass of arthropods. The study was conducted at the Centro de Lançamento de Foguetes Barreira do Inferno, city of Parnamirim, Rio Grande do Norte, in the period February 2011 to January 2012, using pitfall traps, stationary window and beating tray. Among the 26 orders found, the most abundant were: Hymenoptera, Orthoptera, Araneae. Taxa Hymenoptera, Blattodea and Orthoptera showed higher biomass volume. Climatic factors did not influence the fall of Arthropods in the traps, however, the lowest abundance during the rainy season the action of raindrops, reduced the activity of these arthropods on vegetation, reducing its capture in traps (pitfall traps and stationary window ) and method of collection(entomological umbrella)

Produção de biomassa e composição química de adubos verdes cultivados no Vale do Ribeira

The contribution of green manure to soil improvement and crop production depends primarily on biomass production and its chemical composition, which vary depending on the species, region and growing season. The aim of this research was to evaluate the chemical composition of biomass produced by green manures in Vale do Ribeira, São Paulo, Brazil. In order to develop this research, was carried an experiment in Pariquera-Acu, in 2006/2007, in completely randomized blocks design with four treatments (three green manure and spontaneous vegetation) and five replications. At 30, 60, 90 and 120 after sowing samples were collected in 1m(2) of the shoots and determined fresh and dry, and chemical composition biomass. Sunhemp, pigeon pea and mucuna produced, in decreasing order, the largest quantities of biomass and were more efficient than the spontaneous vegetation. The biomass produced by green manure had higher quality than that produced by spontaneous vegetation. Sunhemp and pigeon pea have a higher proportion of dry matter in stems which have low N, high C/N and L/N ratio, variables indicating slow decomposition of residues. The analysis of dry matter partitioned to better indication of the chemical composition of the residues and the prevision of the availability of nutrients in the soil.