Frailty criteria and cognitive performance are related: data from the fibra study in Ermelino Matarazzo, São Paulo, Brazil

Objectives: To assess the relationship between the CHS frailty criteria (Fried et al., 2001) and cognitive performance. Design: Cross sectional and population-based. Setting: Ermelino Matarazzo, a poor sub district of the city of Sao Paulo, Brazil. Participants: 384 community dwelling older adults, 65 and older. Measurements: Assessment of the CHS frailty criteria, the Brief Cognitive Screening Battery (memorization of 10 black and white pictures, verbal fluency animal category, and the Clock Drawing Test) and the Mini-Mental State Examination (MMSE). Results: Frail older adults performed significantly lower than non-frail and pre frail elderly in most cognitive variables. Grip strength and age were associated to MMSE performance, age was associated to delayed memory recall, gait speed was associated to verbal fluency and CDT performance, and education was associated to CDT performance. Conclusion: Being frail may be associated with cognitive decline, thus, gerontological assessments and interventions should consider that these forms of vulnerability may occur simultaneously.

Relationship Between Regional Brain Volumes and Cognitive Performance in the Healthy Aging: An MRI Study Using Voxel-Based Morphometry

The presence of cognitive impairment is a frequent complaint among elderly individuals in the general population. This study aimed to investigate the relationship between aging-related regional gray matter (rGM) volume changes and cognitive performance in healthy elderly adults. Morphometric magnetic resonance imaging (MRI) measures were acquired in a community-based sample of 170 cognitively-preserved subjects (66 to 75 years). This sample was drawn from the "Sao Paulo Ageing and Health" study, an epidemiological study aimed at investigating the prevalence and risk factors for Alzheimer's disease in a low income region of the city of Sao Paulo. All subjects underwent cognitive testing using a cross-culturally battery validated by the Research Group on Dementia 10/66 as well as the SKT (applied on the day of MRI scanning). Blood genotyping was performed to determine the frequency of the three apolipoprotein E allele variants (APOE epsilon 2/epsilon 3/epsilon 4) in the sample. Voxelwise linear correlation analyses between rGM volumes and cognitive test scores were performed using voxel-based morphometry, including chronological age as covariate. There were significant direct correlations between worse overall cognitive performance and rGM reductions in the right orbitofrontal cortex and parahippocampal gyrus, and also between verbal fluency scores and bilateral parahippocampal gyral volume (p < 0.05, familywise-error corrected for multiple comparisons using small volume correction). When analyses were repeated adding the presence of the APOE epsilon 4 allele as confounding covariate or excluding a minority of APOE epsilon 2 carriers, all findings retained significance. These results indicate that rGM volumes are relevant biomarkers of cognitive deficits in healthy aging individuals, most notably involving temporolimbic regions and the orbitofrontal cortex.

Acute heat stress impairs performance parameters and induces mild intestinal enteritis in broiler chickens: Role of acute hypothalamic-pituitary-adrenal axis activation

Studies on the environmental consequences of stress are relevant for economic and animal welfare reasons. We recently reported that long-term heat stressors (31 +/- 1 degrees C and 36 +/- 1 degrees C for 10 h/d) applied to broiler chickens (Gallus gallus domesticus) from d 35 to 42 of life increased serum corticosterone concentrations, decreased performance variables and the macrophage oxidative burst, and produced mild, multifocal acute enteritis. Being cognizant of the relevance of acute heat stress on tropical and subtropical poultry production, we designed the current experiment to analyze, from a neuroimmune perspective, the effects of an acute heat stress (31 +/- 1 degrees C for 10 h on d 35 of life) on serum corticosterone, performance variables, intestinal histology, and peritoneal macrophage activity in chickens. We demonstrated that the acute heat stress increased serum corticosterone concentrations and mortality and decreased food intake, BW gain, and feed conversion (P < 0.05). We did not find changes in the relative weights of the spleen, thymus, and bursa of Fabricius (P > 0.05). Increases in the basal and the Staphylococcus aureus-induced macrophage oxidative bursts and a decrease in the percentage of macrophages performing phagocytosis were also observed. Finally, mild, multifocal acute enteritis, characterized by the increased presence of lymphocytes and plasmocytes within the lamina propria of the jejunum, was also observed. We found that the stress-induced hypothalamic-pituitary-adrenal axis activation was responsible for the negative effects observed on chicken performance and immune function as well as for the changes in the intestinal mucosa. The data presented here corroborate with those presented in other studies in the field of neuroimmunomodulation and open new avenues for the improvement of broiler chicken welfare and production performance.

Mini-Mental State Examination performance in frail, pre-frail, and non-frail community dwelling older adults in Ermelino Matarazzo, Sao Paulo, Brazil

Background: Frailty in older adults is a multifactorial syndrome defined by low metabolic reserve, less resistance to stressors, and difficulty in maintaining organic homeostasis due to cumulative decline of multiple physiological systems. The relationship between frailty and cognition remains unclear and studies about Mini-Mental State Examination (MMSE) performance and frailty are scarce. The objective was to examine the association between frailty and cognitive functioning as assessed by the MMSE and its subdomains. Methods: A cross-sectional population-based study (FIBRA) was carried out in Ermelino Matarazzo, a poor subdistrict of the city of Sao Paulo, Brazil. Participants were 384 community dwelling older adults, 65 years and older who completed the MMSE and a protocol to assess frailty criteria as described in the Cardiovascular Health Study (CHS). Results: Frail older adults had significantly worse performance on the MMSE (p < 0.001 for total score). Linear regression analyses showed that the MMSE total score was influenced by age (p < 0.001), education (p < 0.001), family income (p < 0.001), and frailty status (p < 0.036). Being frail was associated more significantly with worse scores in Time Orientation (p < 0.004) and Immediate Memory (p < 0.001). Conclusions: Our data suggest that being frail is associated with worse cognitive performance, as assessed by the MMSE. It is recommended that the assessment of frail older adults should include the investigation of their cognitive status.

Weight loss in combat sports: physiological, psychological and performance effects

Abstract Background The present article briefly reviews the weight loss processes in combat sports. We aimed to discuss the most relevant aspects of rapid weight loss (RWL) in combat sports. Methods This review was performed in the databases MedLine, Lilacs, PubMed and SciELO, and organized into sub-topics: (1) prevalence, magnitude and procedures, (2) psychological, physiological and performance effects, (3) possible strategies to avoid decreased performance (4) organizational strategies to avoid such practices. Results There was a high prevalence (50%) of RWL, regardless the specific combat discipline. Methods used are harmful to performance and health, such as laxatives, diuretics, use of plastic or rubber suits, and sauna. RWL affects physical and cognitive capacities, and may increase the risk of death. Conclusion Recommendations during different training phases, educational and organizational approaches are presented to deal with or to avoid RWL.

Design and Performance Evaluation of Network-on-Chip Communication Protocols and Architectures

The scale down of transistor technology allows microelectronics manufacturers such as Intel and IBM to build always more sophisticated systems on a single microchip. The classical interconnection solutions based on shared buses or direct connections between the modules of the chip are becoming obsolete as they struggle to sustain the increasing tight bandwidth and latency constraints that these systems demand. The most promising solution for the future chip interconnects are the Networks on Chip (NoC). NoCs are network composed by routers and channels used to inter- connect the different components installed on the single microchip. Examples of advanced processors based on NoC interconnects are the IBM Cell processor, composed by eight CPUs that is installed on the Sony Playstation III and the Intel Teraflops pro ject composed by 80 independent (simple) microprocessors. On chip integration is becoming popular not only in the Chip Multi Processor (CMP) research area but also in the wider and more heterogeneous world of Systems on Chip (SoC). SoC comprehend all the electronic devices that surround us such as cell-phones, smart-phones, house embedded systems, automotive systems, set-top boxes etc... SoC manufacturers such as ST Microelectronics , Samsung, Philips and also Universities such as Bologna University, M.I.T., Berkeley and more are all proposing proprietary frameworks based on NoC interconnects. These frameworks help engineers in the switch of design methodology and speed up the development of new NoC-based systems on chip. In this Thesis we propose an introduction of CMP and SoC interconnection networks. Then focusing on SoC systems we propose: • a detailed analysis based on simulation of the Spidergon NoC, a ST Microelectronics solution for SoC interconnects. The Spidergon NoC differs from many classical solutions inherited from the parallel computing world. Here we propose a detailed analysis of this NoC topology and routing algorithms. Furthermore we propose aEqualized a new routing algorithm designed to optimize the use of the resources of the network while also increasing its performance; • a methodology flow based on modified publicly available tools that combined can be used to design, model and analyze any kind of System on Chip; • a detailed analysis of a ST Microelectronics-proprietary transport-level protocol that the author of this Thesis helped developing; • a simulation-based comprehensive comparison of different network interface designs proposed by the author and the researchers at AST lab, in order to integrate shared-memory and message-passing based components on a single System on Chip; • a powerful and flexible solution to address the time closure exception issue in the design of synchronous Networks on Chip. Our solution is based on relay stations repeaters and allows to reduce the power and area demands of NoC interconnects while also reducing its buffer needs; • a solution to simplify the design of the NoC by also increasing their performance and reducing their power and area consumption. We propose to replace complex and slow virtual channel-based routers with multiple and flexible small Multi Plane ones. This solution allows us to reduce the area and power dissipation of any NoC while also increasing its performance especially when the resources are reduced. This Thesis has been written in collaboration with the Advanced System Technology laboratory in Grenoble France, and the Computer Science Department at Columbia University in the city of New York.

Performance evaluation of low environmental impact asphalt concretes using the mechanistic empirical design method based on laboratory fatigue and permanent deformation models

The "sustainability" concept relates to the prolonging of human economic systems with as little detrimental impact on ecological systems as possible. Construction that exhibits good environmental stewardship and practices that conserve resources in a manner that allow growth and development to be sustained for the long-term without degrading the environment are indispensable in a developed society. Past, current and future advancements in asphalt as an environmentally sustainable paving material are especially important because the quantities of asphalt used annually in Europe as well as in the U.S. are large. The asphalt industry is still developing technological improvements that will reduce the environmental impact without affecting the final mechanical performance. Warm mix asphalt (WMA) is a type of asphalt mix requiring lower production temperatures compared to hot mix asphalt (HMA), while aiming to maintain the desired post construction properties of traditional HMA. Lowering the production temperature reduce the fuel usage and the production of emissions therefore and that improve conditions for workers and supports the sustainable development. Even the crumb-rubber modifier (CRM), with shredded automobile tires and used in the United States since the mid 1980s, has proven to be an environmentally friendly alternative to conventional asphalt pavement. Furthermore, the use of waste tires is not only relevant in an environmental aspect but also for the engineering properties of asphalt [Pennisi E., 1992]. This research project is aimed to demonstrate the dual value of these Asphalt Mixes in regards to the environmental and mechanical performance and to suggest a low environmental impact design procedure. In fact, the use of eco-friendly materials is the first phase towards an eco-compatible design but it cannot be the only step. The eco-compatible approach should be extended also to the design method and material characterization because only with these phases is it possible to exploit the maximum potential properties of the used materials. Appropriate asphalt concrete characterization is essential and vital for realistic performance prediction of asphalt concrete pavements. Volumetric (Mix design) and mechanical (Permanent deformation and Fatigue performance) properties are important factors to consider. Moreover, an advanced and efficient design method is necessary in order to correctly use the material. A design method such as a Mechanistic-Empirical approach, consisting of a structural model capable of predicting the state of stresses and strains within the pavement structure under the different traffic and environmental conditions, was the application of choice. In particular this study focus on the CalME and its Incremental-Recursive (I-R) procedure, based on damage models for fatigue and permanent shear strain related to the surface cracking and to the rutting respectively. It works in increments of time and, using the output from one increment, recursively, as input to the next increment, predicts the pavement conditions in terms of layer moduli, fatigue cracking, rutting and roughness. This software procedure was adopted in order to verify the mechanical properties of the study mixes and the reciprocal relationship between surface layer and pavement structure in terms of fatigue and permanent deformation with defined traffic and environmental conditions. The asphalt mixes studied were used in a pavement structure as surface layer of 60 mm thickness. The performance of the pavement was compared to the performance of the same pavement structure where different kinds of asphalt concrete were used as surface layer. In comparison to a conventional asphalt concrete, three eco-friendly materials, two warm mix asphalt and a rubberized asphalt concrete, were analyzed. The First Two Chapters summarize the necessary steps aimed to satisfy the sustainable pavement design procedure. In Chapter I the problem of asphalt pavement eco-compatible design was introduced. The low environmental impact materials such as the Warm Mix Asphalt and the Rubberized Asphalt Concrete were described in detail. In addition the value of a rational asphalt pavement design method was discussed. Chapter II underlines the importance of a deep laboratory characterization based on appropriate materials selection and performance evaluation. In Chapter III, CalME is introduced trough a specific explanation of the different equipped design approaches and specifically explaining the I-R procedure. In Chapter IV, the experimental program is presented with a explanation of test laboratory devices adopted. The Fatigue and Rutting performances of the study mixes are shown respectively in Chapter V and VI. Through these laboratory test data the CalME I-R models parameters for Master Curve, fatigue damage and permanent shear strain were evaluated. Lastly, in Chapter VII, the results of the asphalt pavement structures simulations with different surface layers were reported. For each pavement structure, the total surface cracking, the total rutting, the fatigue damage and the rutting depth in each bound layer were analyzed.

Dal teatro alla performance e ritorno. La svolta performativa nel teatro contemporaneo e la svolta teatrale nella performance art

Il fulcro tematico e concettuale della tesi consiste nel rapporto complesso, paradossale e spesso anche controverso esistente fra il teatro e la performance (art) – e cioè il rapporto fra i concetti di “teatralità” e di “performatività”. L’attenzione è posta su quelle correnti nelle arti performative contemporanee che tendono allo scioglimento delle nozioni di genere, disciplina, tecnica e autorialità e che mettono in questione lo status stesso dell’opera performativa (lo spettacolo) in quanto prodotto esclusivamente estetico, cioè spettacolare. Vengono esaminate – prelevando rispettivamente dal campo del teatro, della danza e della performance art – le pratiche di Jerzy Grotowski e Thomas Richards, Jérôme Bel e Marina Abramović. Quello che accomuna queste pratiche ben diverse tra loro non è soltanto la problematica del rapporto fra teatralità e performatività ma soprattutto l’aspetto particolarmente radicale e assiduo (e anche paradossale) del loro doppio sforzo, che consiste nello spingere la propria disciplina oltre ogni confine prestabilito e nello stesso tempo nel cercare di ri-definire i suoi codici fondanti e lo statuto ontologico che la distinguerebbero dalle altre discipline performative. Sono esaminate anche diverse teorizzazioni della performance con particolare attenzione a quei contributi che mettono in luce (e in questione) il delicato rapporto fra il teatro e la performance (art) attraverso una (ri)concettualizzazione e comparazione dei termini di teatralità e di performatività. La tesi esamina l’evoluzione della comprensione di quel rapporto all’interno del campo teorico-storico e artistico che inizialmente riflette la tendenza a percepire il rapporto in termini di opposizione e addirittura esclusione per approdare col tempo a una visione più riconciliante e complementare. Le radicali pratiche contemporanee fra il teatro e la performance rappresentano forse una nuova forma-processo performativa specifica e autonoma – che potrebbe essere definita tout court “performance” – e con cui viene definitivamente superato il progetto teatrale modernista?

„This is TZ power! Kenkey can’t do this!“ : Die performative Aushandlung nationaler Kultur ; das National Festival of Arts and Culture in Ghana /// Arbeitspapiere / Institut für Ethnologie und Afrikastudien ; 92

Der vorliegende Artikel beschäftigt sich mit der performativen Aushandlung nationaler Kultur auf dem National Festival of Arts and Culture, das 2006 in Wa, Nordwestghana, stattfand. Die Autorin nahm an der Vorbereitung und Planung des Festivals in lokalen staatlichen Kulturinstitutionen teil, und beobachtete die Diskussionen um die Repräsentation einer (imaginierten) spezifischen Kultur des Nordens in scharfer Abgrenzung zu der des als dominant und diskriminierend empfundenen Südens. In diesem Zusammenhang werden Fragen der Authentizität und Authentifizierung, wie sie in der Planung und Rezeption diskutiert wurden, aufgegriffen und mit der Konzeption des Festivals als gleichzeitig einheitsstiftendes Vehikel für nationale Identität und als Austragungsort eines Wettbewerbs der Regionen um Anerkennung und Ressourcen in Verbindung gesetzt. Das Festival, so die Argumentation, ist eine cultural performance, die das Wesen einer „Kultur“ nicht nur abbildet, sondern auch die Möglichkeit des Wandels und der Subversion birgt. Performance meint hier also gleichzeitig die Aufführung und das Skript der Diskurse, die der Aufführung Bedeutung zuschreiben. Diesen doppelten Ansatz verfolgt der Artikel durch die Verknüpfung von Festivalbeobachtungen und Komiteesitzungsmitschriften im Rahmen der Vorbereitung.

The performativity of nonviolent protest in South Asia (1918 - 1948)

This study seeks to address a gap in the study of nonviolent action. The gap relates to the question of how nonviolence is performed, as opposed to the meaning or impact of nonviolent politics. The dissertation approaches the history of nonviolent protest in South Asia through the lens of performance studies. Such a shift allows for concepts such as performativity and theatricality to be tested in terms of their applicability and relevance to contemporary political and philosophical questions. It also allows for a different perspective on the historiography of nonviolent protest. Using concepts, modes of analysis and tropes of thinking from the emerging field of performance studies, the dissertation analyses two different cases of nonviolent protest, asking how politics is performatively constituted. The first two sections of this study set out the parameters of the key terms of the dissertation: nonviolence and performativity, by tracing their genealogies and legacies as terms. These histories are then located as an intersection in the founding of the nonviolent. The case studies at the analytical core of the dissertation are: fasting as a method in Gandhi's political arsenal, and the army of nonviolent soldiers in the North-West Frontier Province, known as the Khudai Khidmatgar. The study begins with an overview of current theorisations of nonviolence. The approach to the subject is through an investigation of commonly held misconceptions about nonviolent action, such as its supposed passivity, the absence of violence, its ineffectiveness and its spiritual basis. This section addresses the lacunae within existing theories of nonviolence and points to possible fertile spaces for further exploration. Section 3 offers an overview of the different shades of the concept of performativity, asking how it is used in various contexts and how these different nuances can be viewed in relation to each other. The dissertation explores how a theory of performativity may be correlated to the theorisation of nonviolence. The correlations are established in four boundary areas: action/inaction, violence/absence of violence, the actor/opponent and the body/spirit. These boundary areas allow for a theorising of nonviolent action as a performative process. The first case study is Gandhi's use of the fast as a method of nonviolent protest. Using a close reading of his own writings, speeches and letters, as well as a reading of responses to his fast in British newspapers and within India, the dissertation asks what made fasting into Gandhi's most favoured mode of protest and political action. The study reconstructs his unique praxis of the fast from a performative perspective, demonstrating how display and ostentation are vital to the political economy of the fast. It also unveils the cultural context and historical reservoir of body practices, which Gandhi drew from and adapted into 'weapons' of political action. The relationship of Gandhian nonviolence to the body forms a crucial part of the analysis. The second case study is the nonviolent army of the Pashtuns, Khudai Khidmatgar (KK), literally Servants of God. This anti-imperialist movement in the North-West Frontier Province of what is today the border between Pakistan and Afghanistan existed between 1929 and 1948. The movement adopted the organisational form of an army. It conducted protest activities against colonial rule, as well as social reform activities for the Pashtuns. This group was connected to the Congress party of Gandhi, but the dissertation argues that their conceptualisation and praxis of nonviolence emerged from a very different tradition and worldview. Following a brief introduction to the socio-political background of this Pashtun movement, the dissertation explores the activities that this nonviolent army engaged in, looking at their unique understanding of the militancy of an unarmed force, and their mode of combat and confrontation. Of particular interest to the analysis is the way the KK re-combined and mixed what appear to be contradictory ideologies and acts. In doing so, they reframed cultural and historical stereotypes of the Pashtuns as a martial race, juxtaposing the institutional form of the army with a nonviolent praxis based on Islamic principles and social reform. The example of the Khudai Khidmatgar is used to explore the idea that nonviolence is not the opposite of violent conflict, but in fact a dialectical engagement and response to violence. Section 5, in conclusion, returns to the boundary areas of nonviolence: action, violence, the opponent and the body, and re-visits these areas on a comparative note, bringing together elements from Gandhi's fasts and the practices of the KK. The similarities and differences in the two examples are assessed and contextualised in relation to the guiding question of this study, namely the question of the performativity of nonviolent action.

Performance Modeling Of Reconfigurable Distributed Systems Based On The Opensparc Fpga Board And The Sirc Communication Framewor

This thesis explores system performance for reconfigurable distributed systems and provides an analytical model for determining throughput of theoretical systems based on the OpenSPARC FPGA Board and the SIRC Communication Framework. This model was developed by studying a small set of variables that together determine a system¿s throughput. The importance of this model is in assisting system designers to make decisions as to whether or not to commit to designing a reconfigurable distributed system based on the estimated performance and hardware costs. Because custom hardware design and distributed system design are both time consuming and costly, it is important for designers to make decisions regarding system feasibility early in the development cycle. Based on experimental data the model presented in this paper shows a close fit with less than 10% experimental error on average. The model is limited to a certain range of problems, but it can still be used given those limitations and also provides a foundation for further development of modeling reconfigurable distributed systems.

Performance of fluorescence methods, radiographic examination and ICDAS II on occlusal surfaces in vitro

This study compared the performance of fluorescence-based methods, radiographic examination, and International Caries Detection and Assessment System (ICDAS) II on occlusal surfaces. One hundred and nineteen permanent human molars were assessed twice by 2 experienced dentists using the laser fluorescence (LF and LFpen) and fluorescence camera (FC) devices, ICDAS II and bitewing radiographs (BW). After measuring, the teeth were histologically prepared and assessed for caries extension. The sensitivities for dentine caries detection were 0.86 (FC), 0.78 (LFpen), 0.73 (ICDAS II), 0.51 (LF) and 0.34 (BW). The specificities were 0.97 (BW), 0.89 (LF), 0.65 (ICDAS II), 0.63 (FC) and 0.56 (LFpen). BW presented the highest values of likelihood ratio (LR)+ (12.47) and LR- (0.68). Rank correlations with histology were 0.53 (LF), 0.52 (LFpen), 0.41 (FC), 0.59 (ICDAS II) and 0.57 (BW). The area under the ROC curve varied from 0.72 to 0.83. Inter- and intraexaminer intraclass correlation values were respectively 0.90 and 0.85 (LF), 0.93 and 0.87 (LFpen) and 0.85 and 0.76 (FC). The ICDAS II kappa values were 0.51 (interexaminer) and 0.61 (intraexaminer). The BW kappa values were 0.50 (interexaminer) and 0.62 (intraexaminer). The Bland and Altman limits of agreement were 46.0 and 38.2 (LF), 55.6 and 40.0 (LFpen) and 1.12 and 0.80 (FC), for intra- and interexaminer reproducibilities. The posttest probability for dentine caries detection was high for BW and LF. In conclusion, LFpen, FC and ICDAS II presented better sensitivity and LF and BW better specificity. ICDAS II combined with BW showed the best performance and is the best combination for detecting caries on occlusal surfaces.

Performance characteristics and design recommendations for biomass-burning stoves using earthen construction materials

This report provides an analysis of the thermal performance and emissions characteristics of improved biomass stoves constructed using earthen materials. Commonly referred to as mud stoves, this type of improved stove incorporates high clay content soil with an organic binder in the construction of its combustion chamber and body. When large quantities of the mud material are used to construct the stove body, the stove does not offer significant improvements in fuel economy or air quality relative to traditional open fire cooking. This is partly because a significant amount of heat is absorbed by the mass of the stove reducing combustion efficiency and heat transfer to the cook pot. An analysis of the thermal and mechanical properties of stove materials was also performed. A material mixture containing a one‐to‐one ratio by volume of high content clay soil and straw was found to have thermal properties comparable to fired ceramics used in more advanced improved stove designs. Feedback from mud stove users in Mauritania and Mali, West Africa was also collected during implementation. Suggestions for stove design improvements were developed based on this information and the data collected in the performance, emissions, and material properties analysis. Design suggestions include reducing stove height to accommodate user cooking preferences and limiting overall stove mass to reduce heat loss to the stove body.

HIGH PERFORMANCE, LOW COST SUBSPACE DECOMPOSITION AND POLYNOMIAL ROOTING FOR REAL TIME DIRECTION OF ARRIVAL ESTIMATION: ANALYSIS AND IMPLEMENTATION

This thesis develops high performance real-time signal processing modules for direction of arrival (DOA) estimation for localization systems. It proposes highly parallel algorithms for performing subspace decomposition and polynomial rooting, which are otherwise traditionally implemented using sequential algorithms. The proposed algorithms address the emerging need for real-time localization for a wide range of applications. As the antenna array size increases, the complexity of signal processing algorithms increases, making it increasingly difficult to satisfy the real-time constraints. This thesis addresses real-time implementation by proposing parallel algorithms, that maintain considerable improvement over traditional algorithms, especially for systems with larger number of antenna array elements. Singular value decomposition (SVD) and polynomial rooting are two computationally complex steps and act as the bottleneck to achieving real-time performance. The proposed algorithms are suitable for implementation on field programmable gated arrays (FPGAs), single instruction multiple data (SIMD) hardware or application specific integrated chips (ASICs), which offer large number of processing elements that can be exploited for parallel processing. The designs proposed in this thesis are modular, easily expandable and easy to implement. Firstly, this thesis proposes a fast converging SVD algorithm. The proposed method reduces the number of iterations it takes to converge to correct singular values, thus achieving closer to real-time performance. A general algorithm and a modular system design are provided making it easy for designers to replicate and extend the design to larger matrix sizes. Moreover, the method is highly parallel, which can be exploited in various hardware platforms mentioned earlier. A fixed point implementation of proposed SVD algorithm is presented. The FPGA design is pipelined to the maximum extent to increase the maximum achievable frequency of operation. The system was developed with the objective of achieving high throughput. Various modern cores available in FPGAs were used to maximize the performance and details of these modules are presented in detail. Finally, a parallel polynomial rooting technique based on Newton’s method applicable exclusively to root-MUSIC polynomials is proposed. Unique characteristics of root-MUSIC polynomial’s complex dynamics were exploited to derive this polynomial rooting method. The technique exhibits parallelism and converges to the desired root within fixed number of iterations, making this suitable for polynomial rooting of large degree polynomials. We believe this is the first time that complex dynamics of root-MUSIC polynomial were analyzed to propose an algorithm. In all, the thesis addresses two major bottlenecks in a direction of arrival estimation system, by providing simple, high throughput, parallel algorithms.