Internet-enabled tourism entrepreneurs. International entrepreneurial values elicited through repertory test and laddering analysis

Although the tourism industry has been dramatically altered due to the Internet, there has been limited research published about international entrepreneurial values and Internet use in tourism firms. The findings of this study point to a relationship between the values of Internet-enabled international entrepreneurs in small-sized to medium-sized enterprises and the inclination of the firm to develop and initiate international activity. The findings of this study suggest that Internet-enabled tourism entrepreneurs share similar construct values. Two effective but underutilized qualitative methods were used in this study. The first method, repertory test, is an efficient technique for exploring constructs in decision making; the second method, laddering analysis, facilitates understanding of the perceived consequences and personal values guiding behaviour.

Numerical simulations of particle deposition in metal foam heat exchangers

Australia is a high-potential country for geothermal power with reserves currently estimated in the tens of millions of petajoules, enough to power the nation for at least 1000 years at current usage. However, these resources are mainly located in isolated arid regions where water is scarce. Therefore, wet cooling systems for geothermal plants in Australia are the least attractive solution and thus air-cooled heat exchangers are preferred. In order to increase the efficiency of such heat exchangers, metal foams have been used. One issue raised by this solution is the fouling caused by dust deposition. In this case, the heat transfer characteristics of the metal foam heat exchanger can dramatically deteriorate. Exploring the particle deposition property in the metal foam exchanger becomes crucial. This paper is a numerical investigation aimed to address this issue. Two dimensional (2D) numerical simulations of a standard one-row tube bundle wrapped with metal foam in cross-flow are performed and highlight preferential particle deposition areas.

'Water view' from cyberspace : building resilient communities by identifying water risks

The perceived desirability of water views continues to lead to increasing numbers relocating to coastal regions. Proximity to coastal water brings with it unique risks from rising sea levels; however, water can present a risk in any area, whether or not you have water views. Recent Australian and international disasters show that even inland populations not located in traditional flood areas are not immune from water risks. The author examines the nature of these risks and shows how the internet can be used as a tool in identifying risk areas. The author also highlights the need to ensure accuracy of the data for valuation and planning purposes and identifies flaws in the current data provision.

Understanding VET teachers’challenges in providing quality education to international students

In the past fifteen years, increasing attention has been given to the role of Vocational Education and Training (VET) in attracting large numbers of international students and its contribution to the economic development of Australia. This trend has given rise to many challenges in vocational education, especially with regard to providing quality education that ensures international students stay in Australia is a satisfactory experience. Teaching and learning are continuously scrutinised, and teaching quality and student assessment are subject to regular audit (Takerei, 2010). VET teachers are key stakeholders in international education and share responsibility for ensuring international students gain quality learning experiences and positive outcomes; however, their experiences are generally not well understood. Therefore, this paper reports on a study which responded to this research gap and investigated particular challenges that VET teachers experience when teaching international students. The research participants were 15 teachers from several public and private VET institutions in Brisbane, Australia. The method involved responsive interviewing and inductive data analysis to identify and categorize teachers’ challenges and dilemmas. After briefly outlining the background of the research approach, this paper presents findings about challenges that VET teachers’ experienced while teaching international students. The aim of the paper is to explore VET teachers’ perspectives in order to contribute essential understandings that contribute to a holistic approach to vocational education of international students. It reveals that the teachers experienced challenges of three main types: professional, personal and educational.

Talking Turkey : digital storytelling goes to Ankara in 2013

In the last fifteen years digital storytelling has come to stand for considerably more than a specific form of collaborative media production. It is also an international network of new media artists, creative practitioners, curators, scholars, and facilitating community media organisations. In May this year the movement will converge on Ankara, Turkey for its Fifth International Conference and Exhibition. The event will draw together key adopters, adapters and innovators in community-based methods of collaborative media production from around the world. Researchers from the Queensland University of Technology will lead a delegation that will include key players in the Australian digital storytelling movement.

Proceedings of the 6th International Conference on Communities and Technologies

The Communities and Technologies 2013 conference received 46 submissions for full papers and 12 submissions for research in progress papers. From these submissions, 17 papers were selected to appear at the conference (29%). All submitted papers were subjected to double blind peer review by an independent international program committee of 51 experts.

Downunder grads

Downunder Grads is a 4-part series (4 x 26') screened on the Special Broadcasting Station in 2008. It's the start of the semester at one of Australia's top universities and 37,000 students, are about to embark on their studies. University is make or break time; a time that can change people forever. From free education in the 1980s to HECS fee debt and a large increase in full fee paying students, university education is now big business. Through a variety of character stories this four-part series explores the contemporary Australian university experience of both international and Australian students from a range of different backgrounds.

Effects of cold weather on durability of CFRP strengthened circular hollow steel members

Tubular members have become progressively more popular due to excellent structural properties, aesthetic appearance, corrosion and fire protection capability. However, a large number of such structures are found structurally deficient due to reduction of strength when they expose to severe environmental conditions such as marine environment, cold and hot weather. Hence strengthening and retrofitting of structural members are in high demands. In recent times Carbon Fibre Reinforced Polymers (CFRP) composites appears to be an excellent solution to enhance the load carrying capacity and serviceability of steel structures because of its superior physical and mechanical properties. However, the durability of such strengthening system under cold environmental condition has not yet been well documented to guide the engineers. This paper presents the findings of a study conducted to enhance the bond durability of CFRP strengthened steel tubular members by treating steel surface using epoxy based adhesion promoter under cold weather subjected to bending. The experimental program consisted of six number of CFRP strengthened specimens and one bare specimen. The sand blasted surface of the three specimens to be strengthened was pre-treated with MBrace primer and other three were remained untreated and then cured under ambient temperature and cold weather (3oC) for three and six months period of time. The beams were then loaded to failure under four point bending. The structural response of each specimen was predicted in terms of failure mode, failure load and mid-span deflection. The research findings show that the cold weather immersion had an adverse effect on durability of CFRP strengthened structures. Moreover, the epoxy based adhesion promoter was found to enhance the bond durability in elastic range.

An international survey of daily disposable contact lens prescribing

Purpose The aim was to determine the extent of daily disposable contact lens prescribing worldwide and to characterise the associated demographics and fitting patterns. Methods Up to 1,000 survey forms were sent to contact lens fitters in up to 40 countries between January and March every year for five consecutive years (2007 to 2011). Practitioners were asked to record data relating to the first 10 contact lens fits or refits performed after receiving the survey form. Survey data collected since 1996 were also analysed for seven nations to assess daily disposable lens fitting trends since that time. Results Data were collected in relation to 97,289 soft lens fits, of which 23,445 (24.1 per cent) were with daily disposable lenses and 73,170 (75.9 per cent) were with reusable lenses. Daily disposable lens prescribing ranged from 0.6 per cent of all soft lenses in Nepal to 66.2 per cent in Qatar. Compared with reusable lens fittings, daily disposable lens fittings can be characterised as follows: older age (30.0 ± 12.5 versus 29.3 ± 12.3 years for reusable lenses); males are over-represented; a greater proportion of new fits versus refits; 85.9 per cent hydrogel; lower proportion of toric and presbyopia designs and a higher proportion of part-time wear. There has been a continuous increase in daily disposable lens prescribing between 1996 and 2011. The proportion of daily disposable lens fits (as a function of all soft lens fits) is positively related to the gross domestic product at purchasing power parity per capita (r2 = 0.55, F = 46.8, p < 0.0001). Conclusions The greater convenience and other benefits of daily disposable lenses have resulted in this modality capturing significant market share. The contact lens field appears to be heading toward a true single-use-only, disposable lens market.

International survey of rigid contact lens fitting

Purpose To determine the extent of rigid contact lens fitting worldwide and to characterize the associated demographics and fitting patterns. Methods Survey forms were sent to contact lens fitters in up to 40 countries between January and March every year for five consecutive years (2007 to 2011). Practitioners were asked to record data relating to the first 10 contact lens fits or refits performed after receiving the survey form. Survey data collected between 1996 and 2011 were also analyzed to assess rigid lens fitting trends in seven nations during this period. Results Data were obtained for 12,230 rigid and 100,670 soft lens fits between 2007 and 2011. Overall, rigid lenses represented 10.8% of all contact lens fits, ranging from 0.2% in Lithuania to 37% in Malaysia. Compared with soft lens fits, rigid lens fits can be characterized as follows: older age (rigid, 37.3 ± 15.0 years; soft, 29.8 ± 12.4 years); fewer spherical and toric fits; more bifocal/multifocal fits; less frequent replacement (rigid, 7%; soft, 85%); and less part-time wear (rigid, 4%; soft, 10%). High-Dk (contact lens oxygen permeability) (36%) and mid-Dk (42%) materials are predominantly used for rigid lens fitting. Orthokeratology represents 11.5% of rigid contact lens fits. There has been a steady decline in rigid lens fitting between 1996 and 2011. Conclusions Rigid contact lens prescribing is in decline but still represents approximately 10% of all contact lenses fitted worldwide. It is likely that rigid lenses will remain as a viable, albeit increasingly specialized, form of vision correction.

An international survey of toric contact lens prescribing

Objectives To characterize toric contact lens prescribing worldwide. Methods Up to 1,000 survey forms were sent to contact lens fitters in up to 39 countries between January and March every year for 5 consecutive years (2007–2011). Practitioners were asked to record data relating to the first 10 contact lens fits or refits performed after receiving the survey form. Only data for toric and spherical soft lens fits were analyzed. Survey data collected since 1996 were also analyzed for 7 nations to assess toric lens fitting trends since that time. Results Data were collected in relation to 21,150 toric fits (25%) and 62,150 spherical fits (75%). Toric prescribing ranged from 6% of lenses in Russia to 48% in Portugal. Compared with spherical fittings, toric fittings can be characterized as follows: older age (29.8 ± 11.4 years vs. 27.6 ± 10.8 years for spherical lenses); men are overrepresented (38% vs. 34%); greater proportion of new fits (39% vs. 32%); use of silicone hydrogel lenses (49% vs. 39%); and lower proportion of daily disposable lenses (14% vs. 28%). There has been a continuous increase in toric lens prescribing between 1996 and 2011. The proportion of toric lens fits was positively related to the gross domestic product at purchasing power parity per capita for year 2011 (r2 = 0.21; P=0.004). Conclusions At the present time, in the majority of countries surveyed, toric soft contact lens prescribing falls short of that required to correct clinically significant astigmatism (≥0.75 diopters) in all lens wearers.

The TFOS International Workshop on Contact Lens Discomfort: report of the contact lens interactions with the ocular surface and adnexa subcommittee

The report of this subcommittee concerns the impact of contact lenses (CLs) on the ocular surface, with a particular emphasis on CL discomfort (CLD). We define the ocular surface, its regional anatomy, and the physiological responses of each region to CL wear.