The potential impact of Ocean Thermal Energy Conversion (OTEC) on fisheries

The commercial development of ocean thermal energy conversion (OTEC) operations will involve some environmental perturbations for which there is no precedent experience. The pumping of very large volumes of warm surface water and cold deep water and its subsequent discharge will result in the impingement, entrainment, and redistribution of biota. Additional stresses to biota will be caused by biocide usage and temperature depressions. However, the artificial upwelling of nutrients associated with the pumping of cold deep water, and the artificial reef created by an OTEC plant may have positive effects on the local environment. Although more detailed information is needed to assess the net effect of an OTEC operation on fisheries, certain assumptions and calculations are made supporting the conclusion that the potential risk to fisheries is not significant enough to deter the early development of IDEe. It will be necessary to monitor a commercial-scale plant in order to remove many of the remaining uncertainties. (PDF file contains 39 pages.)

The nature of small-scale farmer managed irrigation systems in North West Province, Sri Lanka and potential for aquaculture

RRAs were carried out in two Small Tank Cascade systems (STCs) of North West Province, Sri Lanka (less than 1000 ha total watershed area). A total of 21 tanks and 7 villages were investigated with primary emphasis on two upper watershed communities. The two systems differ primarily in their resource base; namely rainfall, natural forests and proximity to large scale perennial irrigation resources. [PDF contains 86 pages]

Potential for poverty focused integration of aquaculture into irrigation systems in Batticaloa District

The visit highlighted the vital contribution of the inland fisheries sector to provision of basic food security within the uncleared area (farmers report very low consumption frequencies for all other fish or meat protein substitutes). A 30-mile system of Brackish water lagoons which demarcates the cleared and uncleared areas is the main source of retailed fish in the uncleared area. Second in importance is the inland tank fishery, where the bulk of production emanates from 17 major irrigation reservoirs. [PDF contains 29 pages]

Potential Application of Adsorptive Media to Enhance Phosphorus Uptake in Stormwater Basins and Wetlands at Lake Tahoe : literature review. Report to the University of California Davis Tahoe Research Group

Phosphorus removal by wetlands and basins in Lake Tahoe may be improved through designing these systems to filter storm water through media having higher phosphorus removal capabilities than local parent material. Substrates rich in iron, aluminum and calcium oftentimes have enhanced phosphorus removal. These substrates can be naturally occurring, byproducts of industrial or water treatment processes, or engineered. Phosphorus removal fundamentally occurs through chemical adsorption and/or precipitation and much of the phosphorus can be irreversibly bound. In addition to these standard media, other engineered substrates are available to enhance P removal. One such substrate is locally available in Reno and uses lanthanum coated diatomaceous earth for arsenate removal. This material, which has a high positive surface charge, can also irreversibly remove phosphorus. Physical factors also affect P removal. Specifically, specific surface area and particle shape affect filtration capacity, contact area between water and the surface area, and likelihood of clogging and blinding. A number of substrates have been shown to effectively remove P in case studies. Based upon these studies, promising substrates include WTRs, blast furnace slag, steel furnace slag, OPC, calcite, marble Utelite and other LWAs, zeolite and shale. However, other nonperformance factors such as environmental considerations, application logistics, costs, and potential for cementification narrow the list of possible media for application at Tahoe. Industrial byproducts such as slags risk possible leaching of heavy metals and this potential cannot be easily predicted. Fly ash and other fine particle substrates would be more difficult to apply because they would need to be blended, making them less desirable and more costly to apply than larger diameter media. High transportation costs rule out non-local products. Finally, amorphous calcium products will eventually cementify reducing their effectiveness in filtration systems. Based upon these considerations, bauxite, LWAs and expanded shales/clays, iron-rich sands, activated alumina, marble and dolomite, and natural and lanthanum activated diatomaceous earth are the products most likely to be tested for application at Tahoe. These materials are typically iron, calcium or aluminum based; many have a high specific surface area; and all have low transportation costs. (PDF contains 21 pages)

High-Strength Composite Fibers: Realizing True Potential of Carbon Nanotubes in Polymer Matrix through Continuous Reticulate Architecture and Molecular Level Couplings

Carbon nanotubes have unprecedented mechanical properties as defect-free nanoscale building blocks, but their potential has not been fully realized in composite materials due to weakness at the interfaces. Here we demonstrate that through load-transfer-favored three-dimensional architecture and molecular level couplings with polymer chains, true potential of CNTs can be realized in composites as Initially envisioned. Composite fibers with reticulate nanotube architectures show order of magnitude improvement in strength compared to randomly dispersed short CNT reinforced composites reported before. The molecular level couplings between nanotubes and polymer chains results in drastic differences in the properties of thermoset and thermoplastic composite fibers, which indicate that conventional macroscopic composite theory falls to explain the overall hybrid behavior at nanoscale.

Splitting the fast and slow motions in molecular dynamics simulations based on the change of cold potential well bottom

Abstract. The atomic motion is coupled by the fast and slow components due to the high frequency vibration of atoms and the low frequency deformation of atomic lattice, respectively. A two-step approximate method was presented to determine the atomic slow motion. The first step is based on the change of the location of the cold potential well bottom and the second step is based on the average of the appropriate slow velocities of the surrounding atoms. The simple tensions of one-dimensional atoms and two-dimensional atoms were performed with the full molecular dynamics simulations. The conjugate gradient method was employed to determine the corresponding location of cold potential well bottom. Results show that our two-step approximate method is appropriate to determine the atomic slow motion under the low strain rate loading. This splitting method may be helpful to develop more efficient molecular modeling methods and simulations pertinent to realistic loading conditions of materials.

Trace metals -- a potential threat to our fishing industry

Trace metals constitute a major form of water pollutant that can adversely affect fish production. The potentially toxic metals have been identified as lead, zinc, copper, arsenic, antimony, mercury beryllium, barium, cadmium, chromium, nickel, selenium among others. Preliminary laboratory studies have been directed to the determination of traces of lead in the aquatic biota and its toxicity. There are indications that the levels reported in effluents from some of the industries may be above the tolerant limits of local fish species and organisms that make up their food. Metal pollution could become a serious problem to freshwater fisheries in the future as a result of increasing urbanization and industrialization, unless efforts are made to prevent it

Harnessing the fishery potential of man-made lakes for the partial commercialisation of Niger River Basin Development Authority, Minna, Nigeria

Niger River Basin Development Authority Minna (NRBDA) is one of the eleven river basins in Nigeria now undergoing transition towards partial commercialisation. In the light of this the need to be self-sustaining through exploration and exploitation of every possible areas along their operation to yield revenue cannot be over-emphasized. Therefore it is most pertinent to consider fisheries activities along their water bodies as one of the major sources of revenue by organising the local fishermen operating along the water into cooperative bodies and made to pay for fishing rights. Strategies to accomplish this objective is highlighted. The need to embark on aquaculture projects by construction of fish ponds at suitable sites along the reservoirs and developing the recreational potentials of their water bodies as sources of revenue is also stressed

Enhancing potential fish catch in Nigeria's inland waters

The paper enumerated the following ways of improving fisheries:- Effective implementation of the inland fisheries Decree of 1992, stocking and introduction of new species in to small and medium size reservoirs, enhancement of fish catch through increased artisanal fisheries development, fish hatchery development in strategic zones for increased fingerling production to stock reservoirs and natural water bodies, extensive culture development in flood ponds, and encouragement of commercial aquaculture under private entrepreneurship. The paper further elaborate on the strategies for effective implementation of the above guidelines with the hope of offering solution to problems hindering production in Nigeria

Storage potential and utilization of tilapia mince

Production of mince from Tilapia using a combination of physical and chemical methods was found to improve the storage life of the mince in the deep freezer. Though the chemical composition of the mince was slightly affected, the mince was microbiologically stable throughout the five weeks frozen storage. Fish cakes prepared traditionally from tilapia minces were more acceptable than oven dried cakes. Production of fish cakes form tilapia will improve utilization of this species in areas where small size tilapia are regarded as fish of low economic value

Fluctuation characteristics of arc voltage and jet flow in a non-transferred dc plasma generated at reduced pressure

A torch with a set of inter-electrode inserts between the cathode and the anode/nozzle with a wide nozzle exit was designed to generate plasma jets at chamber pressures of 500–10 000 Pa. The variation of the arc voltage was examined with the change in working parameters such as gas flow rate and chamber pressure. The fluctuation in the arc voltage was recorded with an oscilloscope, and the plasma jet fluctuation near the torch exit was observed with a high-speed video camera and detected with a double-electrostatic probe. Results show that the 300 Hz wave originated from the tri-phase rectified power supply was always detected under all generating conditions. Helmholtz oscillations over 3000 Hz was detected superposed on the 300 Hz wave at gas flow rates higher than 8.8 slm with a peak to valley amplitude lower than 5% of the average voltage value. No appreciable voltage fluctuation caused by the irregular arc root movement is detected, and mechanisms for the arc voltage and jet flow fluctuations are discussed.

An evaluation of the pelagic primary productivity and potential fish yield of Kainji Lake, Nigeria

The environmental conditions of Kainji Lake from 1971/72 to date appear to have stabilized to a large extent, judging from the similarity of physico-chemical parameters investigated in this study over the period. Solar radiation (as reflected in variation in temperature) and pH have remained largely constant over the years, while conductivity (index of nutrient enrichment), though significantly higher in 1995/96, could be described as sporadic and needs further monitoring to ascertain its trend in the lake. While water transparency and dissolved oxygen were higher in 1971/72 compared to the other years, these increases cannot be said to be overwhelming. The lower transparency in 1995/96 was due to the exceptional flood of that year and may have also accounted for the poorer dissolved oxygen concentration compared to the other years due to its impact on photosynthesis. There is no evidence from this study to indicate that primary productivity has increased over the years. Consequently, the observed increase in fish yield by the KLFPP from CAS, which is corroborated by estimates from the MEI, cannot be supported on the basis of improved photosynthetic production. The phenomenal high levels of conductivity recorded during certain periods in 1995 (600 mu mhos cm super(-1)) are hitherto unknown in the lake and may indicate a trend towards nutrient enrichment. However, it is premature at this stage to conclude on its long-term impact on primary production and consequently, on fish yield. Secondly, the notion of overfishing in the 80s (Ita, 1993), may need to be further examined as low or dwindling catches could be due to a number of factors among which are the level of fishing effort, the type and efficiency of gears and the intensity of sampling. It would appear that with the intervention of KLFPP, the better management of the lake's fisheries would increase the current level of catch. It also needs to be examined how much of the clupeid fisheries, which is now known to account for a substantial proportion of the total fish yield in Kainji Lake, was included in the sampling of the 80s. (PDF contains 43 pages)

Coastal brownfields and adaptation to climate change: Discussions on potential hazards from contaminated groundwater displacement due to saltwater incursion

Toxic-waste associated with coastal brownfield sites can pose serious risks to human and environmental health. In light of anticipated sea-level rise (SLR) due to global climate change, coastal brownfields require heightened attention. The primary intent of this study is to pose questions and encourage discussion of this problem among policy makers. Impacts from SLR on coastal zones are examined within a brownfield policy framework and, current coastal brownfield policy discussions with respect to SLR are also examined. (PDF contains 4 pages)

Lasing without or with inversion in an open four-level system with a phase-fluctuation driving field

The effect of exit rate and the ratio of atomic injection rate on gain behaviour has been investigated, and the effects of phase fluctuation on absorption, dispersion and population difference in an open four-level system have been analysed by using numerical simulation from the steady linear, analytical solution. The variation of the linewidth, Rabi frequency of the driving field, the exit rate or the ratio of atomic injection rate can change the lasing properties in the open system. The presence of finite linewidth due to driving-field phase fluctuation prevents the open four-level atomic system from obtaining a high refractive index along with zero absorption.