Self-learning of fault diagnosis identification

A good and early fault detection and isolation system along with efficient alarm management and fine sensor validation systems are very important in today¿s complex process plants, specially in terms of safety enhancement and costs reduction. This paper presents a methodology for fault characterization. This is a self-learning approach developed in two phases. An initial, learning phase, where the simulation of process units, without and with different faults, will let the system (in an automated way) to detect the key variables that characterize the faults. This will be used in a second (on line) phase, where these key variables will be monitored in order to diagnose possible faults. Using this scheme the faults will be diagnosed and isolated in an early stage where the fault still has not turned into a failure.

Web-based education in Spanish Universities. A Comparison of Open Source E-Learning Platforms

Web-based education or „e-learning‟ has become a critical component in higher education for the last decade, replacing other distance learning methods, such as traditional computer training or correspondence learning. The number of university students who take on-line courses is continuously increasing all over the world. In Spain, nearly a 90% of the universities have an institutional e-learning platform and over 60% of the traditional on-site courses use this technology as a supplement to the traditional face-to-face classes. This new form of learning allows the disappearance of geographical barriers and enables students to schedule their own learning process, among some other advantages. On-line education is developed through specific software called „e-learning platform‟ or „virtual learning environment‟ (VLE). A considerable number of web-based tools to deliver distance courses are currently available. Open source software packages such as Moodle, Sakai, dotLRN or Dokeos are the most commonly used in the virtual campuses of Spanish universities. This paper analyzes the possibilities that virtual learning environments provide university teachers and learners and offers a technical comparison among some of the most popular e-learning learning platforms.

Accessing advanced computational resources in Africa through Cloud Computing

Low resources in many African locations do not allow many African scientists and physicians to access the latest advances in technology. This deficiency hinders the daily life of African professionals that often cannot afford, for instance, the cost of internet fees or software licenses. The AFRICA BUILD project, funded by the European Commission and formed by four European and four African institutions, intends to provide advanced computational tools to African institutions in order to solve current technological limitations. In the context of AFRICA BUILD we have carried out, a series of experiments to test the feasibility of using Cloud Computing technologies in two different locations in Africa: Egypt and Burundi. The project aims to create a virtual platform to provide access to a wide range of biomedical informatics and learning resources to professionals and researchers in Africa.

Self Learning and self evaluation exercises database in basic mechanics: a theoretical-practical approach

In the School of Mines of the Technical University of Madrid (UPM) the first course of different degrees has been implemented and adapted to the European Higher Educational Area (EHEA). In all of the degrees there is a first semester course which gathers all the contents of basic mechanics: from the first kinematics concepts to the rigid solid plane motion Before the Bologna process took place, the authors had established the final assessment of the theoretical contents through open questions of theoretical-practical character In the present work, the elaboration of a wide database containing theoretical-practical questions that students can access on line is presented. The questions are divided in thirteen different questionnaires composed of a number of questions randomly chosen from a certain group in the database. Each group corresponds to a certain learning objective that the student knows. After answering the questionnaire and checking the grade assigned according to the performance of the student, the pupils can see the correct response displayed on the screen and widely explained by the professors. This represents a 10% of the final grade. As the student can access the questionnaires as many times as they want, the main goal is the self-assessment of each learning objective and therefore, getting the students involved in their own learning process so they can decide how much time they need to acquire the required level.

AMELIE: Authoring Multimedia-Enhanced Learning Interactive Environment for e-Health Contents

This paper presents the AMELIE Authoring Tool for e-health applications. AMELIE provides the means for creating video-based contents with a focus on e-learning and telerehabilitation processes. The main core of AMELIE lies in the efficient exploitation of raw multimedia resources, which may be already available at clinical centers or recorded ad hoc for learning purposes by health professionals. Three real use cases scenarios involving different target users are presented: (1) cognitive skills? training of surgeons in minimally invasive surgery (medical professionals), (2) training of informal carers for elderly home assistance and (3) cognitive rehabilitation of patients with acquired brain injury. Preliminary validation in the field of surgery hints at the potential of AMELIE; and its versatility in different medical applications is patent from the use cases described. Regardless, new validation studies are planned in the three main application areas identified in this work.

Diseño del curso para operador "Coeficientes inherentes de reactividad" a plataforma e-Learning

Las centrales nucleares necesitan de personal altamente especializado y formado. Es por ello por lo que el sector de la formación especializada en centrales nucleares necesita incorporar los últimos avances en métodos formativos. Existe una gran cantidad de cursos de formación presenciales y es necesario transformar dichos cursos para utilizarlos con las nuevas tecnologías de la información. Para ello se necesitan equipos multidisciplinares, en los que se incluyen ingenieros, que deben identificar los objetivos formativos, competencias, contenidos y el control de calidad del propio curso. En este proyecto se utilizan técnicas de ingeniería del conocimiento como eje metodológico para transformar un curso de formación presencial en formación on-line a través de tecnologías de la información. En la actualidad, las nuevas tecnologías de la información y comunicación están en constante evolución. De esta forma se han sumergido en el mundo transformando la visión que teníamos de éste para dar lugar a nuevas oportunidades. Es por ello que este proyecto busca la unión entre el e-learning y el mundo empresarial. El objetivo es el diseño, en plataforma e-learning, de un curso técnico que instruya a operadores de sala de control de una central nuclear. El trabajo realizado en este proyecto ha sido, además de transformar un curso presencial en on-line, en obtener una metodología para que otros cursos se puedan transformar. Para conseguir este cometido, debemos preocuparnos tanto por el contenido de los cursos como por su gestión. Por este motivo, el proyecto comienza con definiciones básicas de terminología propia de e-learning. Continúa con la generación de una metodología que aplique la gestión de conocimiento para transformar cualquier curso presencial a esta plataforma. Definida la metodología, se aplicará para el diseño del curso específico de Coeficientes Inherentes de Reactividad. Finaliza con un estudio económico que dé viabilidad al proyecto y con la creación de un modelo económico que estime el precio para cualquier curso futuro. Abstract Nuclear power plants need highly specialized and trained personnel. Thus, nuclear power plant Specialized Training Sector requires the incorporation of the latest advances in training methods. A large array of face-to-face training courses exist and it has become necessary to transform said courses in order to apply them with the new information systems available. For this, multidisciplinary equipment is needed where the engineering workforce must identify educational objectives, competences and abilities, contents and quality control of the different courses. In this project, knowledge engineering techniques are employed as the methodological axis in order to transform a face-to-face training course into on-line training through the use of new information technologies. Nowadays, new information and communication technologies are in constant evolution. They have introduced themselves into our world, transforming our previous vision of them, leading to new opportunities. For this reason, the present Project seeks to unite the use of e-learning and the Business and Corporate world. The main objective is the design, in an e-learning platform, of a technical course that will train nuclear power plant control-room operators. The work carried out in this Project has been, in addition to the transformation of a face-to-face course into an online one, the obtainment of a methodology to employ in the future transformation of other courses. In order to achieve this mission, our interest must focus on the content as well as on the management of the various courses. Hence, the Project starts with basic definitions of e-learning terminology. Next, a methodology that applies knowledge management for the transformation of any face-to-face course into e-learning has been generated. Once this methodology is defined, it has been applied for the design process of the Inherent Coefficients of Reactivity course. Finally, an economic study has been developed in order to determine the viability of the Project and an economic model has been created to estimate the price of any given course

Exploring three approaches to offer distance learning courses through a social network of health researchers in three African countries

The Institute of Tropical Medicine in Antwerp hereby presents the results of two pilot distance learning training programmes, developed under the umbrella of the AFRICA BUILD project (FP7). The two courses focused on evidence-based medicine (EBM): with the aim of enhancing research and education, via novel approaches and to identify research needs emanating from the field. These pilot experiences, which were run both in English-speaking (Ghana), and French-speaking (Mali and Cameroon) partner institutions, produced targeted courses for the strengthening of research methodology and policy. The courses and related study materials are in the public domain and available through the AFRICA BUILD Portal (http://www.africabuild.eu/taxonomy/term/37); the training modules were delivered live via Dudal webcasts. This paper assesses the success and difficulties of transferring EBM skills with these two specific training programmes, offered through three different approaches: fully online facultative courses, fully online tutor supported courses or through a blended approach with both online and face-to-face sessions. Key factors affecting the selection of participants, the accessibility of the courses, how the learning resources are offered, and how interactive online communities are formed, are evaluated and discussed.

Plataformas experimentales para la formación en el área de la electrónica en entornos de e-learning

El campo de estudio relacionado con los laboratorios remotos en el ámbito educativo de las ciencias y la ingeniería está sufriendo una notable expansión ante la necesidad de adaptar los procesos de aprendizaje en dichas áreas a las características y posibilidades de la formación online. Muchos de los recursos educativos basados en esta tecnología, existentes en la actualidad, presentan ciertas limitaciones que impiden alcanzar las competencias que se deben adquirir en los laboratorios de ingeniería. Estas limitaciones están relacionadas con diferentes aspectos de carácter técnico y formativo. A nivel técnico las limitaciones principales se centran en el grado de versatilidad que son capaces de proporcionar comparado con el que se dispone en un laboratorio tradicional y en el modo de interacción del usuario, que provoca que el estudiante no distinga claramente si está realizando acciones sobre sistemas reales o simulaciones. A nivel formativo las limitaciones detectadas son relevantes para poder alcanzar un aprendizaje significativo. En concreto están relacionadas principalmente con un escaso sentimiento de inmersión, una reducida sensación de realismo respecto a las operaciones que se realizan o la limitada posibilidad de realizar actividades de forma colaborativa. La aparición de nuevas tecnologías basadas en entornos inmersivos, unida a los avances producidos relacionados con el aumento de la capacidad gráfica de los ordenadores y del ancho de banda de acceso a Internet, han hecho factible que las limitaciones comentadas anteriormente puedan ser superadas gracias al desarrollo de nuevos recursos de aprendizaje surgidos de la fusión de laboratorios remotos y mundos virtuales 3D. Esta tesis doctoral aborda un trabajo de investigación centrado en proponer un modelo de plataformas experimentales, basado en la fusión de las dos tecnologías mencionadas, que permita generar recursos educativos online que faciliten la adquisición de competencias prácticas similares a las que se consiguen en un laboratorio tradicional vinculado a la enseñanza de la electrónica. El campo de aplicación en el que se ha focalizado el trabajo realizado se ha centrado en el área de la electrónica aunque los resultados de la investigación realizada se podrían adaptar fácilmente a otras disciplinas de la ingeniería. Fruto del trabajo realizado en esta tesis es el desarrollo de la plataforma eLab3D, basada en el modelo de plataformas experimentales propuesto, y la realización de dos estudios empíricos llevados a cabo con estudiantes de grado en ingeniería, muy demandados por la comunidad investigadora. Por un lado, la plataforma eLab3D, que permite llevar a cabo de forma remota actividades prácticas relacionadas con el diseño, montaje y prueba de circuitos electrónicos analógicos, aporta como novedad un dispositivo hardware basado en un sistema de conmutación distribuido. Dicho sistema proporciona un nivel de versatilidad muy elevado, a nivel de configuración de circuitos y selección de puntos de medida, que hace posible la realización de acciones similares a las que se llevan a cabo en los laboratorios presenciales. Por otra parte, los estudios empíricos realizados, que comparaban la eficacia educativa de una metodología de aprendizaje online, basada en el uso de la plataforma eLab3D, con la conseguida siguiendo una metodología clásica en los laboratorios tradicionales, mostraron que no se detectaron diferencias significativas en el grado de adquisición de los resultados de aprendizaje entre los estudiantes que utilizaron la plataforma eLab3D y los que asistieron a los laboratorios presenciales. Por último, hay que destacar dos aspectos relevantes relacionados directamente con esta tesis. En primer lugar, los resultados obtenidos en las experiencias educativas llevadas a cabo junto a valoraciones obtenidas por el profesorado que ha colaborado en las mismas han sido decisivos para que la plataforma eLab3D se haya integrado como recurso complementario de aprendizaje en titulaciones de grado de ingeniería de la Universidad Politécnica de Madrid. En segundo lugar, el modelo de plataformas experimentales que se ha propuesto en esta tesis, analizado por investigadores vinculados a proyectos en el ámbito de la fusión nuclear, ha sido tomado como referencia para generar nuevas herramientas de formación en dicho campo. ABSTRACT The field of study of remote laboratories in sciences and engineering educational disciplines is undergoing a remarkable expansion given the need to adapt the learning processes in the aforementioned areas to the characteristics and possibilities of online education. Several of the current educational resources based on this technology have certain limitations that prevent from reaching the required competencies in engineering laboratories. These limitations are related to different aspects of technical and educational nature. At the technical level, they are centered on the degree of versatility they are able to provide compared to a traditional laboratory and in the way the user interacts with them, which causes the student to not clearly distinguish if actions are being performed over real systems or over simulations. At the educational level, the detected limitations are relevant in order to reach a meaningful learning. In particular, they are mainly related to a scarce immersion feeling, a reduced realism sense regarding the operations performed or the limited possibility to carry out activities in a collaborative way. The appearance of new technologies based on immersive environments, together with the advances in graphical computer capabilities and Internet bandwidth access, have made the previous limitations feasible to be overcome thanks to the development of new learning resources that arise from merging remote laboratories and 3D virtual worlds. This PhD thesis tackles a research work focused on the proposal of an experimental platform model, based on the fusion of both mentioned technologies, which allows for generating online educational resources that facilitate the acquisition of practical competencies similar to those obtained in a traditional electronics laboratory. The application field, in which this work is focused, is electronics, although the research results could be easily adapted to other engineering disciplines. A result of this work is the development of eLab3D platform, based on the experimental platform model proposed, and the realization of two empirical studies with undergraduate students, highly demanded by research community. On one side, eLab3D platform, which allows to accomplish remote practical activities related to the design, assembling and test of analog electronic circuits, provides, as an original contribution, a hardware device based on a distributed switching system. This system offers a high level of versatility, both at the circuit configuration level and at the selection of measurement points, which allows for doing similar actions to those conducted in hands-on laboratories. On the other side, the empirical studies carried out, which compare the educational efficiency of an online learning methodology based on the use of eLab3D platform with that obtained following a classical methodology in traditional laboratories, shows that no significant differences in the acquired degree of learning outcomes among the students that used eLab3D platform and those that attended hands-on laboratories were detected. Finally, it is important to highlight two relevant aspects directly related with this thesis work. First of all, the results obtained in the educational experiences conducted, along with the assessment from the faculty that has collaborated in them, have been decisive to integrate eLab3D platform as a supplementary learning resource in engineering degrees at Universidad Politecnica de Madrid. Secondly, the experimental platform model originally proposed in this thesis, which has been analysed by nuclear fusion researchers, has been taken as a reference to generate new educational tools in that field.

Mobile assisted language learning : prototipo de la aplicación UP2B2

La forma de consumir contenidos en Internet ha cambiado durante los últimos años. Inicialmente se empleaban webs estáticas y con contenidos pobres visualmente. Con la evolución de las redes de comunicación, esta tendencia ha variado. A día de hoy, deseamos páginas agradables, accesibles y que nos presenten temas variados. Todo esto ha cambiado la forma de crear páginas web y en todos los casos se persigue el objetivo de atraer a los usuarios. El gran auge de los smartphones y las aplicaciones móviles que invaden el mercado actual han revolucionado el mundo del estudio de los idiomas permitiendo compatibilizar los recursos punteros con el aprendizaje tradicional. La popularidad de los dispositivos móviles y de las aplicaciones ha sido el principal motivo de la realización de este proyecto. En él se realizará un análisis de las diferentes tecnologías existentes y se elegirá la mejor opción que se ajuste a nuestras necesidades para poder desarrollar un sistema que implemente el enfoque llamado Mobile Assisted Language Learning (MALL) que supone una aproximación innovadora al aprendizaje de idiomas con la ayuda de un dispositivo móvil. En este documento se va a ofrecer una panorámica general acerca del desarrollo de aplicaciones para dispositivos móviles en el entorno del e-learning. Se estudiarán características técnicas de diferentes plataformas seleccionando la mejor opción para la implementación de un sistema que proporcione los contenidos básicos para el aprendizaje de un idioma, en este caso del inglés, de forma intuitiva y divertida. Dicho sistema permitirá al usuario mejorar su nivel de inglés mediante una interfaz web de forma dinámica y cercana empleando los recursos que ofrecen los dispositivos móviles y haciendo uso del diseño adaptativo. Este proyecto está pensado para los usuarios que dispongan de poco tiempo libre para realizar un curso de forma presencial o, mejor aún, para reforzar o repasar contenidos ya aprendidos por otros medios más tradicionales o no. La aplicación ofrece la posibilidad de que se haga uso del sistema de forma fácil y sencilla desde cualquier dispositivo móvil del que se disponga como es un smartphone, tablet o un ordenador personal, compitiendo con otros usuarios o contra uno mismo y mejorando así el nivel de partida a través de las actividades propuestas. Durante el proyecto se han comparado diversas soluciones, la mayoría de código abierto y de libre distribución que permiten desplegar servicios de almacenamiento accesibles mediante Internet. Se concluirá con un caso práctico analizando los requisitos técnicos y llevando a cabo las fases de análisis, diseño, creación de la base de datos, implementación y pruebas dentro del ciclo de vida del software. Finalmente, se migrará la aplicación con toda la información a un servidor en la nube. ABSTRACT. The way of consuming content on the Internet has changed over the past years. Initially, static websites were used with poor visual contents. Nevertheless, with the evolution of communication networks this trend has changed. Nowadays, we expect pleasant, accessible and varied topic pages and such expectations have changed the way to create web pages generally aiming at appealing and therefore, attracting users. The great boom of smartphones and mobile applications in the current market, have revolutionized the world of language learning as they make it possible to combine computing with traditional learning resources. The popularity of mobile devices and applications has been the main reason for the development of this project. Here, the different existing technologies will be examined and we will try to select the best option that adapts to our needs in order to develop a system that implements Mobile Assisted Language Learning (MALL) that in broad terms implies an approach to language learning with the help of a mobile device. This report provides an overview of the development of applications for mobile devices in the e-learning environment. We will study the technical characteristics of different platforms and we will select the best option for the implementation of a system that provide the basic content for learning a language, in this case English, by means of an intuitive and fun method. This system will allow the user to improve their level of English with a web interface in a dynamic and close way employing the resources offered by mobile devices using the adaptive design. This project is intended for users who do not have enough free time to make a classroom course or to review contents from more traditional courses as it offers the possibility to make use of the system quickly and easily from any mobile device available such as a smartphone, a tablet or a personal computer, competing with other users or against oneself and thus improving their departing level through different activities. During the project, different solutions have been compared. Most of them, open source and free distribution that allow to deploy storage services accessible via the Internet. It will conclude with a case study analyzing the technical requirements and conducting phases of analysis, design and creation of a database, implementation and testing in the software lifecycle. Finally, the application will be migrated with all the information to a server in the cloud.

A DOCÊNCIA EM ADMINISTRAÇÃO E ALGUMAS CONTRIBUIÇÕES DE PROJETOS EDUCATIVOS

Esta dissertação apresenta dois projetos que apontam possibilidades de se construir novos conhecimentos com práticas viáveis e significativas para os alunos de Administração de Empresas do ensino superior. O objetivo é fomentar a discussão sobre o papel do docente e a formação dos professores no ensino superior com qualidade, através dos estudos em uma Faculdade da Zona Leste da cidade de São Paulo. Este trabalho aponta que o bacharelado em Administração pode ir para além de meros conteúdos técnicos a serem humanizados a partir da utilização de recursos didáticos inovadores. A análise dos projetos permite concluir que ações educativas diferenciadas, inspiradas na teoria freiriana, apresentaram-se como forma de enfrentamento às dificuldades nas relações entre ensino e aprendizagem. Com a aplicação dos referidos projetos, as possíveis dificuldades de aprendizagem foram transformadas em oportunidades, e hoje são contribuições à qualidade educativa.

Características del desarrollo de una mirada profesional en estudiantes para profesor de matemáticas en un contexto b-learning

Esta investigación presenta un estudio cuyo objetivo es identificar aspectos que apoyan el desarrollo de la mirada profesional en estudiantes para profesores de matemáticas en un contexto b-learning. Analizamos las producciones de un grupo de estudiantes para profesores de matemáticas de educación secundaria (documentos escritos y participaciones en un debate on-line) cuando analizaban el razonamiento proporcional de estudiantes de educación secundaria. Los resultados indican que la interacción en el debate en línea permitió a algunos estudiantes para profesor mejorar su capacidad de identificar e interpretar aspectos relevantes del pensamiento matemático de los estudiantes de educación secundaria. Estos resultados indican que el desarrollo de “una mirada profesional” del profesor es un proceso complicado pero que la posibilidad de construir un discurso progresivo en línea es un factor importante para su desarrollo.

Record of undergraduates’ activities in virtual learning environments

Virtual learning environments (VLEs) have witnessed a high evolution, namely regarding their potentialities, the tools and the activities they provide. VLEs enable us to access large quantities of data resulting from both students and teachers’ activities developed in those environments. Monitoring undergraduates’ activities in VLEs is important as it allows us to showcase, in a structured way, a number of indicators which may be taken into account to understand the learning process more deeply and to propose improvements in the teaching and learning strategies as well as in the institution’s virtual environment. Although VLEs provide several data sectorial statistics, they do not provide knowledge regarding the institution’s evolution. Therefore, we consider the analysis of the activity logs in VLEs over a period of five years to be paramount. This paper focuses on the analysis of the activities developed by students in a virtual learning environment, from a sample of undergraduate students, approximately 7000 per year, over a period of five academic years, namely from 2009/2010 to 2013/2014. The main aims of this research work are to assess the evolution of activity logs in the virtual learning environment of a Portuguese public higher education institution, in order to fill possible gaps and to hold out the prospect of new forms of use of the environment. The results obtained from the data analysis show that overall, the number of accesses to the virtual learning environment increased over the five years under study. The most used tools were Resources, Messages and Assignments. The most frequent activities developed with these tools were respectively consulting information, sending messages and submitting assignments. The frequency of accesses to the virtual learning environment was characterized according to the number of accesses in the activity log. The data distribution was divided into five frequency categories named very low, low, moderate, high and very high, determined by the percentiles 20, 40, 60, 80 and 100, respectively. The study of activity logs of virtual learning environments is important not only because they provide real knowledge of the use that undergraduates make of these environments, but also because of the possibilities they create regarding the identification of a need for new pedagogical approaches or a reinforcement of previously consolidated approaches.

Annual report of the Joint Legislative Committee on Natural Resources.

Report year ends Mar.

Evaluative learning in human Pavlovian conditioning: Extinct, but still there?

Previous studies of human affective learning, the acquisition of likes and dislikes, provided evidence that extinction training does not affect changes in conditional stimulus (CS) valence as indexed by paper/pencil ratings. Experiment 1 (N = 32) investigated whether this is an artifact of the CS valence assessment, which is taken in test sessions before and after training. Pleasantness ratings were collected in pre/post training tests and, for half of the participants, on-line during training. Rated unpleasantness of the CS that preceded the aversive US (CS+) increased during acquisition and decreased during extinction back to neutral. However, as in previous studies, post extinction paper/pencil ratings revealed the maintenance of rated CS+ unpleasantness. Experiment 2 (N = 34) replicated this finding for two measures of CS valence, paper/pencil and the continuous measure used during training. The present results indicate that previous reports of failures to find extinction of affective learning may reflect renewal rather than maintenance of acquired CS valence across extinction training. (C) 2003 Elsevier Science (USA). All rights reserved.

The effects of assessment type on verbal ratings of conditional stimulus valence and contingency judgments: Implications for the extinction of evaluative learning

Recent research on causal learning found (a) that causal judgments reflect either the current predictive value of a conditional stimulus (CS) or an integration across the experimental contingencies used in the entire experiment and (b) that postexperimental judgments, rather than the CS's current predictive value, are likely to reflect this integration. In the current study, the authors examined whether verbal valence ratings were subject to similar integration. Assessments of stimulus valence and contingencies responded similarly to variations of reporting requirements, contingency reversal, and extinction, reflecting either current or integrated values. However, affective learning required more trials to reflect a contingency change than did contingency judgments. The integration of valence assessments across training and the fact that affective learning is slow to reflect contingency changes can provide an alternative interpretation for researchers' previous failures to find an effect of extinction training on verbal reports of CS valence.