926 resultados para Oil painting on copper
Resumo:
Deep fat frying process is one of the widely followed cooking practices throughout the world. Cooking oils serve as a medium for frying food for transferring heat and makes fried food tasty and palatable. Frying process is a most complex process involving numerous physicochemical changes which are complicated to understand. Frying leads to thermal degradation of oil through thermo-oxidation, hydrolysis, and polymerization. Hydrolysis results in formation of free fatty acids whereas oxidation process produces hydroperoxides and small molecular carbonyl compounds. This whole process leads to the formation of polar compounds and degradation of antioxidants that further degrades frying oil. Eventually, through mass transfer process these degradation products accumulate into fried food and reduce the nutritional quality of both oil and food. Thus, the frying process is of research interest calls for detailed systematic study which is chosen for the present study. The primary objective of this study is to understand the mechanism of degradation and characterization ofdegraded products which helps in arriving at the limits for frying oil utilization in terms of number of frying cycles. The mechanistic studies and the knowledge on the degraded products help to understand the way to retard the deterioration of oil for stability and enhancement of frying cycles. The study also explores the formation of the predominant polar compounds and their structural elucidation through mass spectrometry. Oxidation of oil is another important factor that ignites the degradation phenomena. One of the best ways to increase thermal stability of any oil is addition of potent antioxidants. But, most of the natural and synthetic antioxidants are unstable and ineffective at frying temperatures. Therefore, it is necessary to screen alternative antioxidants for their activity in the refined oils which are devoid of any added antioxidants. In this context, this study discussed the efficacy of several natural and synthetic antioxidants to retard the formation of polar compounds and thermooxidation during prolonged frying conditions. Similarly, the advantage of blending of two different oils to improve the thermal stability was explored. The present study brings out the total picture on the type of degradation products formed during frying and the ways of retarding the determination to improve upon the stability of the oil and enhancement of frying cycles.
Resumo:
On 28 July 2010, the Nigerian Federal Executive Council approved January 1, 2012 as the effective date for the convergence of Nigerian Statement of Accounting Standards (SAS) or Nigerian GAAP (NG-GAAP) with International Financial Reporting Standards (IFRS). By this pronouncement, all publicly listed companies and significant public interest entities in Nigeria were statutorily required to issue IFRS based financial statements for the year ended December, 2012. This study investigates the impact of the adoption of IFRS on the financial statements of Nigerian listed Oil and Gas entities using six years of data which covers three years before and three years after IFRS adoption in Nigeria and other African countries. First, the study evaluates the impact of IFRS adoption on the Exploration and Evaluation (E&E) expenditures of listed Oil and Gas companies. Second, it examines the impact of IFRS adoption on the provision for decommissioning of Oil and Gas installations and environmental rehabilitation expenditures. Third, the study analyses the impact of the adoption of IFRS on the average daily Crude Oil production cost per Barrel. Fourth, it examines the extent to which the adoption and implementation of IFRS affects the Key Performance Indicators (KPIs) of listed Oil and Gas companies. The study further explores the impact of IFRS adoption on the contractual relationships between Nigerian Government and Oil and Gas companies in terms of Joint Ventures (JVs) and Production Sharing Contracts (PSCs) as it relates to taxes, royalties, bonuses and Profit Oil Split. A Paired Samples t-test, Wilcoxon Signed Rank test and Gray’s (Gray, 1980) Index of Conservatism analyses were conducted simultaneously where the accounting numbers, financial ratios and industry specific performance measures of GAAP and IFRS were computed and analysed and the significance of the differences of the mean, median and Conservatism Index values were compared before and after IFRS adoption. Questionnaires were then administered to the key stakeholders in the adoption and implementation of IFRS and the responses collated and analysed. The results of the analyses reveal that most of the accounting numbers, financial ratios and industry specific performance measures examined changed significantly as a result of the transition from GAAP to IFRS. The E&E expenditures and the mean cost of Crude Oil production per barrel of Oil and Gas companies increased significantly. The GAAP values of inventories, GPM, ROA, Equity and TA were also significantly different from the IFRS values. However, the differences in the provision for decommissioning expenditures were not statistically significant. Gray’s (Gray, 1980) Conservatism Index shows that Oil and Gas companies were more conservative under GAAP when compared to the IFRS regime. The Questionnaire analyses reveal that IFRS based financial statements are of higher quality, easier to prepare and present to management and easier to compare among competitors across the Oil and Gas sector but slightly more difficult to audit compared to GAAP based financial statements. To my knowledge, this is the first empirical research to investigate the impact of IFRS adoption on the financial statements of listed Oil and Gas companies. The study will therefore make an enormous contribution to academic literature and body of knowledge and void the existing knowledge gap regarding the impact and implications of IFRS adoption on the financial statements of Oil and Gas companies.
Resumo:
The aim of this research is to investigate the influence of explosive ratio and type of sensitizer on the quality of explosive welds between copper and aluminium alloy plates. The welds were performed on a partially overlapping joint configuration using an emulsion explosive (EE) with two different sensitizers, hollow glass microspheres (HGMS) and expanded polystyrene spheres (EPS). Welds with an improved surface were achieved by using the HGMS sensitizer. A higher wave amplitude was registered in welds produced with the EPS sensitizer. In turn, the dimension of the molten pockets was influenced by the explosive ratio, increasing in size with increases in the values of this parameter. The intermetallic content of these zones varied according to the sensitizer type. Unlike the CuAl2 phase, the Cu-richer phases CuAl and Cu9Al4 were only identified in welds performed using the EPS sensitizer. An increase in hardness was observed at the interface of all welds, which resulted from both the presence of intermetallic phases and the plastic deformation of the materials promoted by the impact. This effect was most evident on the aluminium alloy side. All the welds had a greater strength than copper, i.e. the weakest material of the joint. (C) 2016 Elsevier Ltd. All rights reserved.
Resumo:
Highly purified, intact chloroplasts were prepared from pea (Pisum sativum L.) and spinach (Spinacia oleracea L.) following an identical procedure, and were used to investigate the cupric cation inhibition on the photosynthetic activity. In both species, copper inhibition showed a similar inhibitor concentration that decreases the enzyme activity by 50% (IC(50) approximately 1.8 microM) and did not depend on the internal or external phosphate (Pi) concentration, indicating that copper did not interact with the Pi translocator. Fluorescence analysis suggested that the presence of copper did not facilitate photoinhibition, because there were no changes in maximal fluorescence (F(m)) nor in basal fluorescence (F(o)) of copper-treated samples. The electron transport through the photosystem II (PSII) was also not affected (operating efficiency of PSII-F'v/F'm similar in all conditions). Yet, under Cu(2+) stress, the proportion of open PSII reaction centers was dramatically decreased, and the first quinone acceptor (Q(A)) reoxidation was fully inhibited, as demonstrated by the constant photochemical quenching (q(P)) along experiment time. The quantum yield of PSII electron transport (Phi(PSII)) was also clearly affected by copper, and therefore reduced the photochemistry efficiency. Manganese, when added simultaneously with copper, delayed the inhibition, as measured by oxygen evolution and chlorophyll fluorescence, but neither reversed the copper effect when added to copper-inhibited plastids, nor prevented the inhibition of the Hill activity of isolated copper-treated thylakoids. Our results suggest that manganese competed with copper to penetrate the chloroplast envelope. This competition seems to be specific because other divalent cations e.g. magnesium and calcium, did not interfere with the copper action in intact chloroplasts. All results do suggest that, under these conditions, the stroma proteins, such as the Calvin-Benson cycle enzymes or others are the most probable first target for the Cu(2+) action, resulting in the total inhibition of chloroplast photosynthesis and in the consequent unbalanced rate of production and consumption of the reducing power.
Resumo:
Iran possess huge oil reservoir and occupies second place in OPEC. Recent investigation has revealed that reservoir capacity in the country amount to 60 billion barrel of oil. Many measures has been carried out to increase production capacity of oil fields to 4.2 million barrel per day. Thus any distribution in oil exploration may leave adverse effects on social and economic activities. Unfortunately due to absence of a comprehensive CPM on environmental impact assessment, lots of environmental distribution has been occurred in land and off-shore. It is well known that implementation of EIA can reduce environmental hazards. In the present investigation, all major and minor activities associated with oil exploration is identified and subsequently their effects on physical, chemical and biological environment (aquatic) has been brought out. In this context, economical, social and cultural effects of marine oil exploration is also discussed. Subsequently, all methods of EIA were studied and best mitigation plans were drawn up both for exploitation and exploration phases.
Organic and conventional fertilization effects on essential oil production of Melissa officinalis L.
Resumo:
The explosion of the Deepwater Horizon (DWH) oil platform resulted in large amounts of crude oil and dispersant Corexit 9500A® released into the Gulf of Mexico and coincided with the spawning season of the oyster, Crassostrea virginica. The effects of exposing gametes and embryos of C. virginica to dispersant alone (Corexit), mechanically (HEWAF) and chemically dispersed (CEWAF) DWH oil were evaluated. Fertilization success and the morphological development, growth, and survival of larvae were assessed. Gamete exposure reduced fertilization (HEWAF: EC201 h = 1650 μg tPAH50 L− 1; CEWAF: EC201 h = 19.4 μg tPAH50 L− 1; Corexit: EC201 h = 6.9 mg L− 1). CEWAF and Corexit showed a similar toxicity on early life stages at equivalent nominal concentrations. Oysters exposed from gametes to CEWAF and Corexit experienced more deleterious effects than oysters exposed from embryos. Results suggest the presence of oil and dispersant during oyster spawning season may interfere with larval development and subsequent recruitment.
Resumo:
No abstract available.
Resumo:
Aiming to introduce a multiresidue analysis for the trace detection of pesticide residues belonging to organophosphorus and triazine classes from olive oil samples, a new sample preparation methodology comprising the use of a dual layer of “tailor-made” molecularly imprinted polymers (MIPs) SPE for the simultaneous extraction of both pesticides in a single procedure has been attempted. This work has focused on the implementation of a dual MIP-layer SPE procedure (DL-MISPE) encompassing the use of two MIP layers as specific sorbents. In order to achieve higher recovery rates, the amount of MIP layers has been optimized as well as the influence of MIP packaging order. The optimized DL-MISPE approach has been used in the preconcentration of spiked organic olive oil samples with concentrations of dimethoate and terbuthylazine similar to the maximum residue limits and further quantification by HPLC. High recovery rates for dimethoate (95%) and terbuthylazine (94%) have been achieved with good accuracy and precision. Overall, this work constitutes the first attempt on the development of a dual pesticide residue methodology for the trace analysis of pesticide residues based on molecular imprinting technology. Thus, DL-MISPE constitutes a reliable, robust, and sensitive sample preparation methodology that enables preconcentration of the target pesticides in complex olive oil samples, even at levels similar to the maximum residue limits enforced by the legislation.
Resumo:
The cercospora leaf spot, caused by Cercospora abelmoschi Ellis and Everhart, is quite common in okra culture. Therefore, this study aimed to evaluate the efficiency of aqueous extracts of neem ( Azadirachta indica A. Juss), citronella ( Cymbopogon nardus (L.) Rendle), eucalyptus ( Eucalyptus grandis L.), ecolife®, A. indica oil and fungicide cercobin 700 PM® in control of cercospora leaf spot on okra in greenhouse. The extracts and neem oil were tested in concentration 10%, the fungicide cercobin 700PM® in dose 2.5 g.l-1, applied 10 days after pathogen inoculation by leaf spray and the citric biomass extract ecolife® in concentration 5.0 ml.l-1, applied 10 days before pathogen inoculation. All treatments, except ecolife®, were effective in controlling cercospora leaf spot and may be recommended as alternatives in agroecological systems.
Resumo:
The in vitro activation effect of copper on the acid phosphatase of the green algae Pseudokirch- neriella subcapitata (formely Selenastrum capricor- nutum) under preincubation condition. Apparent Michaelis constant values of 1.21 and 0.37 mM, and activation energy values of 26.8 and 13.6 kJ mol -1 were determined in the absence and in the presence of 0.2 mM Cu2?, respectively. The dissociation constant value for Cu2? binding to the enzyme was determined to be 22.04 lM. The decrease of the apparent Michaelis constant (Km) and activation energy values in the presence of Cu2? correlates well with its activating effect on the acid phosphatase activity. This propriety could be used as a sensitive bioindicator for copper in environmental samples.
Resumo:
Os rios e lagos de várzea da província petrolífera de Urucu, na Amazônia Central, são amplamente colonizados por macrófitas aquáticas, que podem ser afetadas por acidentes durante a exploração e o transporte de petróleo. Entre as macrófitas, a espécie flutuante Eichhornia crassipes (aguapé) ocorre abundantemente na região; OBJETIVO: O objetivo desse estudo foi verificar o efeito de diferentes dosagens do petróleo de Urucu (0; 0,5; 1,5 e 3,0 L.m-2) na biomassa viva e morta de E. crassipes e em algumas características físicas e químicas da água; MÉTODOS: O experimento teve oitenta e quatro dias de duração. A cada sete dias foi determinada a biomassa (viva e morta) de E. crassipes e os valores de temperatura, pH, condutividade elétrica e oxigênio dissolvido da água; RESULTADOS: A dosagem de 0,5 L.m-2 foi suficiente para causar mortalidade parcial (48%) em E. crassipes após trinta e cinco dias de exposição ao petróleo. A dosagem de 3,0 L.m-2 causou mortalidade total (100%) em E. crassipes em oitenta e quatro dias de exposição. A decomposição do petróleo e da biomassa morta de E. crassipes provocam a redução do oxigênio dissolvido e do pH, e aumento da condutividade elétrica e de fósforo total na água; CONCLUSÕES: Nós concluímos que um derramamento de petróleo pode provocar mortalidade total em uma população de uma espécie de macrófita, mas não em uma outra. Isto pode alterar a diversidade de espécies de macrófitas na região impactada. No caso de Eichhornia crassipes e Pistia stratiotes, um derramamento de petróleo de Urucu pode favorecer E. crassipes, a espécie menos sensível ao petróleo.
Resumo:
Increases in oil prices after the economic recession have been surprising for domestic oil production in the United States since the beginning of 2009. Not only did the conventional oil extraction increase, but unconventional oil production and exploration also improved greatly with the favorable economic conditions. This favorable economy encourages companies to invest in new reservoirs and technological developments. Recently, enhanced drilling techniques including hydraulic fracturing and horizontal drilling have been supporting the domestic economy by way of unconventional shale and tight oil from various U.S. locations. One of the main contributors to this oil boom is the unconventional oil production from the North Dakota Bakken field. Horizontal drilling has increased oil production in the Bakken field, but the economic issues of unconventional oil extraction are still debatable due to volatile oil prices, high decline rates of production, a limited production period, high production costs, and lack of transportation. The economic profitability and viability of the unconventional oil play in the North Dakota Bakken was tested with an economic analysis of average Bakken unconventional well features. Scenario analysis demonstrated that a typical North Dakota Bakken unconventional oil well is profitable and viable as shown by three financial metrics; net present value, internal rate of return, and break-even prices.
Resumo:
This study investigates fast pyrolysis bio-oils produced from alkali-metal-impregnated biomass (beech wood). The impregnation aim is to study the catalytic cracking of the pyrolysis vapors as a result of potassium or phosphorus. It is recognized that potassium and phosphorus in biomass can have a major impact on the thermal conversion processes. When biomass is pyrolyzed in the presence of alkali metal cations, catalytic cracking of the pyrolysis liquids occurs in the vapor phase, reducing the organic liquids produced and increasing yields of water, char, and gas, resulting in a bio-oil that has a lower calorific value and an increased chance of phase separation. Beech wood was impregnated with potassium or phosphorus (K impregnation and P impregnation, respectively) in the range of 0.10-2.00 wt %. Analytical pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) was used to examine the pyrolysis products during thermal degradation, and thermogravimetric analysis (TGA) was used to examine the distribution of char and volatiles. Both potassium and phosphorus are seen to catalyze the pyrolytic decomposition of biomass and modify the yields of products. 3-Furaldehyde and levoglucosenone become more dominant products upon P impregnation, pointing to rearrangement and dehydration routes during the pyrolysis process. Potassium has a significant influence on cellulose and hemicellulose decomposition, not just on the formation of levoglucosan but also other species, such as 2(5H)-furanone or hydroxymethyl-cyclopentene derivatives. Fast pyrolysis processing has also been undertaken using a laboratory-scale continuously fed bubbling fluidized-bed reactor with a nominal capacity of 1 kg h-1 at the reaction temperature of 525 °C. An increase in the viscosity of the bio-oil during the stability assessment tests was observed with an increasing percentage of impregnation for both additives. This is because bio-oil undergoes polymerization while placed in storage as a result of the inorganic content. The majority of inorganics are concentrated in the char, but small amounts are entrained in the pyrolysis vapors and, therefore, end up in the bio-oil.