The application of computerised modelling techniques in manufacturing system design

The absence of a definitive approach to the design of manufacturing systems signifies the importance of a control mechanism to ensure the timely application of relevant design techniques. To provide effective control, design development needs to be continually assessed in relation to the required system performance, which can only be achieved analytically through computer simulation. The technique providing the only method of accurately replicating the highly complex and dynamic interrelationships inherent within manufacturing facilities and realistically predicting system behaviour. Owing to the unique capabilities of computer simulation, its application should support and encourage a thorough investigation of all alternative designs. Allowing attention to focus specifically on critical design areas and enabling continuous assessment of system evolution. To achieve this system analysis needs to efficient, in terms of data requirements and both speed and accuracy of evaluation. To provide an effective control mechanism a hierarchical or multi-level modelling procedure has therefore been developed, specifying the appropriate degree of evaluation support necessary at each phase of design. An underlying assumption of the proposal being that evaluation is quick, easy and allows models to expand in line with design developments. However, current approaches to computer simulation are totally inappropriate to support the hierarchical evaluation. Implementation of computer simulation through traditional approaches is typically characterized by a requirement for very specialist expertise, a lengthy model development phase, and a correspondingly high expenditure. Resulting in very little and rather inappropriate use of the technique. Simulation, when used, is generally only applied to check or verify a final design proposal. Rarely is the full potential of computer simulation utilized to aid, support or complement the manufacturing system design procedure. To implement the proposed modelling procedure therefore the concept of a generic simulator was adopted, as such systems require no specialist expertise, instead facilitating quick and easy model creation, execution and modification, through simple data inputs. Previously generic simulators have tended to be too restricted, lacking the necessary flexibility to be generally applicable to manufacturing systems. Development of the ATOMS manufacturing simulator, however, has proven that such systems can be relevant to a wide range of applications, besides verifying the benefits of multi-level modelling.

Staying in nursing:what factors determine whether nurses intend to remain employed?

Aim. To test a model of eight thematic determinants of whether nurses intend to remain in nursing roles. Background. Despite the dramatic increase in the supply of nurses in England over the past decade, a combination of the economic downturn, funding constraints and more generally an ageing nursing population means that healthcare organizations are likely to encounter long-term problems in the recruitment and retention of nursing staff. Design. Survey. Method. Data were collected from a large staff survey conducted in the National Health Service in England between September-December 2009. A multi-level model was tested using MPlus statistical software on a sub-sample of 16,707 nurses drawn from 167 healthcare organizations. Results. Findings were generally supportive of the proposed model. Nurses who reported being psychologically engaged with their jobs reported a lower intention to leave their current job. The perceived availability of developmental opportunities, being able to achieve a good work-life balance and whether nurses' encountered work pressures were also influencing factors on their turnover intentions. However, relationships formed with colleagues and patients displayed comparatively small relationships with turnover intentions. Conclusion. The focus at the local level needs to be on promoting employee engagement by equipping staff with the resources (physical and monetary) and control to enable them to perform their tasks to standards they aspire to and creating a work environment where staff are fully involved in the wider running of their organizations, communicating to staff that patient care is important and the top priority of the organization. © 2012 Blackwell Publishing Ltd.

Change in third sector organisations: the impact of European Union funding in cross-national perspectives

This is a study of third sector organisations and organisational change resulting from European Union funding. While there is a growing body of research which shows how governmental funding can contribute to the organisational challenges that third sector organisations encounter, research on how European Union funding affects third sector organisations is limited. This thesis contributes towards closing this gap in knowledge by identifying a number of organisational changes which can be attributed to the use of European Union funding. A qualitative approach was taken to explore organisational change resulting from the use of URBAN II funding in nine third sector organisations which were studied in the context of the URBAN II programmes of Belfast, Berlin and Bristol. The conceptual framework for this study draws on organisation theory and resource dependence theory, together with concepts of co-production and multi-level governance. URBAN II funding was found to have affected organisational structures, processes, services, goals and participants, as well as the interactions of organisations with their external environment. In contrast to earlier research however, the findings from this study suggest that many of these organisational changes improved the capacity of third sector organisations to carry out their work. The cross-national comparison of the findings further showed that organisational impacts resulting from the use of URBAN II funding can vary significantly between different countries. Programme Managers were found to have played a critically important' role in enabling third sector organisations to obtain benefits from URBAN II funding. Many positive organisational changes arose from a close collaboration between Programme Managers and third sector organisations. Conversely, many negative organisational impacts were found to be due, not to the regulations associated with European funding, but primarily to the approach adopted by the Programme Managers and Local Development Partnerships towards engaging third sector organisations in programme delivery.

Teamwork for product innovation in Taiwanese family firms:an indigenous psychology perspective: An indigenous psychology

As the existing team literature mostly excludes context and culture, little is known about how these elements affect real-life team working (Engestrom, 2008; Salas & Wildman, 2009), and how teams work in non-Western settings, such as in Chinese firms (Phan, Zhou, & Abrahamson, 2010).This research addresses this issue by investigating how new product design (NPD) teams use team working to carry out product innovation in the context of Chinese family businesses (CFBs) via an indigenous psychology perspective. Unlike mainstream teamwork literature which mostly employs an etic design, an indigenous psychology perspective adopts an emic approach which places emphasis on understanding real-life phenomena in context through a cultural-insider perspective (Kim, 2000). Compatible with this theoretical position, a multiple qualitative case study approach was used as the research methodology. Three qualitative case studies were carried out in three longstanding family-run manufacturing firms in Taiwan, where family firms have been the pillars of high economic growth in the past five decades (W.-w. Chu, 2009). Two salient findings were established across the three case studies. First, the team processes identified across the three family firms are very similar with the exception of owners’ involvement and on-the-job training. All three family firms’ NPD teams are managed in a highly hierarchical manner, with considerable emphasis placed on hierarchical ranking, cost-effectiveness, efficiency, practicability, and interpersonal harmony. Second, new products developed by CFBNPD teams are mostly incremental innovation or copycat innovation, while radical or original products are rare. In many ways, CFBNPD teams may not be the ideal incubators for innovation. This is because several aspects of their unique context can cast constraints on how they work and innovate, and thus limit the ratio of radical innovation. A multi-level review into the facilitators and inhibitors of creativity or innovation in CFBNPD teams is provided. The theoretical and practical implications of the findings and the limitations of the study are also addressed.

Municipal benchmarking:organisational learning and network performance in the public sector

The main purpose of this dissertation is to assess the relation between municipal benchmarking and organisational learning with a specific emphasis on benchlearning and performance within municipalities and between groups of municipalities in the building and housing sector in the Netherlands. The first and main conclusion is that this relation exists, but that the relative success of different approaches to dimensions of change and organisational learning are a key explanatory factor for differences in the success of benchlearning. Seven other important conclusions could be derived from the empirical research. First, a combination of interpretative approaches at the group level with a mixture of hierarchical and network strategies, positively influences benchlearning. Second, interaction among professionals at the inter-organisational level strengthens benchlearning. Third, stimulating supporting factors can be seen as a more important strategy to strengthen benchlearning than pulling down barriers. Fourth, in order to facilitate benchlearning, intrinsic motivation and communication skills matter, and are supported by a high level of cooperation (i.e., team work), a flat organisational structure and interactions between individuals. Fifth, benchlearning is facilitated by a strategy that is based on a balanced use of episodic (emergent) and systemic (deliberate) forms of power. Sixth, high levels of benchlearning will be facilitated by an analyser or prospector strategic stance. Prospectors and analysers reach a different learning outcome than defenders and reactors. Whereas analysers and prospectors are willing to change policies when it is perceived as necessary, the strategic stances of defenders and reactors result in narrow process improvements (i.e., single-loop learning). Seventh, performance improvement is influenced by functional perceptions towards performance, and these perceptions ultimately influence the elements adopted. This research shows that efforts aimed at benchlearning and ultimately improved service delivery, should be directed to a multi-level and multi-dimensional approach addressing the context, content and process of dimensions of change and organisational learning.

Religious compliance in Islamic financial institutions

The central goal of this research is to explore the approach of the Islamic banking industry in defining and implementing religious compliance at regulatory, institutional, and individual level within the Islamic Banking and Finance (IBF) industry. It also examines the discrepancies, ambiguities and paradoxes that are exhibited in the individual and institutional behaviour in relation to the infusion and enactment of religious exigencies into compliance processes in IBF. Through the combined lenses of institutional work and a sensemaking perspective, this research portrays the practice of infusion of Islamic law in Islamic banks as being ambiguous and drifting down to the institutional and actor levels. In instances of both well-codified and non-codified regulatory frameworks for Shariah compliance, institutional rules ambiguity, rules interpretation and enactment ambiguities were found to be prevalent. The individual IBF professionals performed retrospective and prospective actions to adjust the role and rules boundaries both in the case of a Muslim and a non-Muslim country. The sensitizing concept of religious compliance is the primary theoretical contribution of this research and provides a tool to understand the nature of what constitutes Shariah compliance and the dynamics of its implementation. It helps to explain the empirical consequences of the lack of a clear definition of Shariah compliance in the regulatory frameworks and standards available for the industry. It also addresses the calls to have a clear reference on what constitute Shariah compliance in IBF as proposed in previous studies (Hayat, Butter, & Kock, 2013; Maurer, 2003, 2012; Pitluck, 2012). The methodological and theoretical perspective of this research are unique in the use of multi-level analysis and approaches that blend micro and macro perspectives of the research field, to illuminate and provide a more complete picture of religious compliance infusion and enactment in IBF.

Reflecting on time, timing and timeliness in public sector supply networks

Despite recent research on time (e.g. Hedaa & Törnroos, 2001), consideration of the time dimension in data collection, analysis and interpretation in research in supply networks is, to date, still limited. Drawing on a body of literature from organization studies, and empirical findings from a six-year action research programme and a related study of network learning, we reflect on time, timing and timeliness in interorganizational networks. The empirical setting is supply networks in the English health sector wherein we identify and elaborate various issues of time, within the case and in terms of research process. Our analysis is wide-ranging and multi-level, from the global (e.g. identifying the notion of life cycles) to the particular (e.g. different cycle times in supply, such as daily for deliveries and yearly for contracts). We discuss the ‘speeding up’ of inter-organizational ‘e’ time and tensions with other time demands. In closing the paper, we relate our conclusions to the future conduct of the research programme and supply research more generally, and to the practice of managing supply (in) networks.

Chain-link based HVDC voltage source converter using current injection

VSC converters are becoming more prevalent for HVDC applications. Two circuits are commercially available at present, a traditional six-switch, PWM inverter, implemented using series connected IGBTs - ABBs HVDC Light®, and the other a modular multi-level converter (MMC) - Siemens HVDC-PLUS. This paper presents an alternative MMC topology, which utilises a novel current injection technique, and exhibits several desirable characteristics.

Dimensioning BCH codes for coherent DQPSK systems with laser phase noise and cycle slips

Forward error correction (FEC) plays a vital role in coherent optical systems employing multi-level modulation. However, much of coding theory assumes that additive white Gaussian noise (AWGN) is dominant, whereas coherent optical systems have significant phase noise (PN) in addition to AWGN. This changes the error statistics and impacts FEC performance. In this paper, we propose a novel semianalytical method for dimensioning binary Bose-Chaudhuri-Hocquenghem (BCH) codes for systems with PN. Our method involves extracting statistics from pre-FEC bit error rate (BER) simulations. We use these statistics to parameterize a bivariate binomial model that describes the distribution of bit errors. In this way, we relate pre-FEC statistics to post-FEC BER and BCH codes. Our method is applicable to pre-FEC BER around 10-3 and any post-FEC BER. Using numerical simulations, we evaluate the accuracy of our approach for a target post-FEC BER of 10-5. Codes dimensioned with our bivariate binomial model meet the target within 0.2-dB signal-to-noise ratio.

Towards a multilevel model of the high performance work systems–workplace safety relationship

Human Resource (HR) systems and practices generally referred to as High Performance Work Practices (HPWPs), (Huselid, 1995) (sometimes termed High Commitment Work Practices or High Involvement Work Practices) have attracted much research attention in past decades. Although many conceptualizations of the construct have been proposed, there is general agreement that HPWPs encompass a bundle or set of HR practices including sophisticated staffing, intensive training and development, incentive-based compensation, performance management, initiatives aimed at increasing employee participation and involvement, job safety and security, and work design (e.g. Pfeffer, 1998). It is argued that these practices either directly and indirectly influence the extent to which employees’ knowledge, skills, abilities, and other characteristics are utilized in the organization. Research spanning nearly 20 years has provided considerable empirical evidence for relationships between HPWPs and various measures of performance including increased productivity, improved customer service, and reduced turnover (e.g. Guthrie, 2001; Belt & Giles, 2009). With the exception of a few papers (e.g., Laursen &Foss, 2003), this literature appears to lack focus on how HPWPs influence or foster more innovative-related attitudes and behaviours, extra role behaviors, and performance. This situation exists despite the vast evidence demonstrating the importance of innovation, proactivity, and creativity in its various forms to individual, group, and organizational performance outcomes. Several pertinent issues arise when considering HPWPs and their relationship to innovation and performance outcomes. At a broad level is the issue of which HPWPs are related to which innovation-related variables. Another issue not well identified in research relates to employees’ perceptions of HPWPs: does an employee actually perceive the HPWP –outcomes relationship? No matter how well HPWPs are designed, if they are not perceived and experienced by employees to be effective or worthwhile then their likely success in achieving positive outcomes is limited. At another level, research needs to consider the mechanisms through which HPWPs influence –innovation and performance. The research question here relates to what possible mediating variables are important to the success or failure of HPWPs in impacting innovative behaviours and attitudes and what are the potential process considerations? These questions call for theory refinement and the development of more comprehensive models of the HPWP-innovation/performance relationship that include intermediate linkages and boundary conditions (Ferris, Hochwarter, Buckley, Harrell-Cook, & Frink, 1999). While there are many calls for this type of research to be made a high priority, to date, researchers have made few inroads into answering these questions. This symposium brings together researchers from Australia, Europe, Asia and Africa to examine these various questions relating to the HPWP-innovation-performance relationship. Each paper discusses a HPWP and potential variables that can facilitate or hinder the effects of these practices on innovation- and performance- related outcomes. The first paper by Johnston and Becker explores the HPWPs in relation to work design in a disaster response organization that shifts quickly from business as usual to rapid response. The researchers examine how the enactment of the organizational response is devolved to groups and individuals. Moreover, they assess motivational characteristics that exist in dual work designs (normal operations and periods of disaster activation) and the implications for innovation. The second paper by Jørgensen reports the results of an investigation into training and development practices and innovative work behaviors (IWBs) in Danish organizations. Research on how to design and implement training and development initiatives to support IWBs and innovation in general is surprisingly scant and often vague. This research investigates the mechanisms by which training and development initiatives influence employee behaviors associated with innovation, and provides insights into how training and development can be used effectively by firms to attract and retain valuable human capital in knowledge-intensive firms. The next two papers in this symposium consider the role of employee perceptions of HPWPs and their relationships to innovation-related variables and performance. First, Bish and Newton examine perceptions of the characteristics and awareness of occupational health and safety (OHS) practices and their relationship to individual level adaptability and proactivity in an Australian public service organization. The authors explore the role of perceived supportive and visionary leadership and its impact on the OHS policy-adaptability/proactivity relationship. The study highlights the positive main effects of awareness and characteristics of OHS polices, and supportive and visionary leadership on individual adaptability and proactivity. It also highlights the important moderating effects of leadership in the OHS policy-adaptability/proactivity relationship. Okhawere and Davis present a conceptual model developed for a Nigerian study in the safety-critical oil and gas industry that takes a multi-level approach to the HPWP-safety relationship. Adopting a social exchange perspective, they propose that at the organizational level, organizational climate for safety mediates the relationship between enacted HPWS’s and organizational safety performance (prescribed and extra role performance). At the individual level, the experience of HPWP impacts on individual behaviors and attitudes in organizations, here operationalized as safety knowledge, skills and motivation, and these influence individual safety performance. However these latter relationships are moderated by organizational climate for safety. A positive organizational climate for safety strengthens the relationship between individual safety behaviors and attitudes and individual-level safety performance, therefore suggesting a cross-level boundary condition. The model includes both safety performance (behaviors) and organizational level safety outcomes, operationalized as accidents, injuries, and fatalities. The final paper of this symposium by Zhang and Liu explores leader development and relationship between transformational leadership and employee creativity and innovation in China. The authors further develop a model that incorporates the effects of extrinsic motivation (pay for performance: PFP) and employee collectivism in the leader-employee creativity relationship. The papers’ contributions include the incorporation of a PFP effect on creativity as moderator, rather than predictor in most studies; the exploration of the PFP effect from both fairness and strength perspectives; the advancement of knowledge on the impact of collectivism on the leader- employee creativity link. Last, this is the first study to examine three-way interactional effects among leader-member exchange (LMX), PFP and collectivism, thus, enriches our understanding of promoting employee creativity. In conclusion, this symposium draws upon the findings of four empirical studies and one conceptual study to provide an insight into understanding how different variables facilitate or potentially hinder the influence various HPWPs on innovation and performance. We will propose a number of questions for further consideration and discussion. The symposium will address the Conference Theme of ‘Capitalism in Question' by highlighting how HPWPs can promote financial health and performance of organizations while maintaining a high level of regard and respect for employees and organizational stakeholders. Furthermore, the focus on different countries and cultures explores the overall research question in relation to different modes or stages of development of capitalism.

Giants and dwarfs:the multilevel lobbying strategies of national interest organizations

The article addresses the bias in interest representation within the EU by examining the lobbying strategies of national interest organisations within the EU’s multilevel political system. Both our theoretical framework, which includes the determinants of a national interest organisation's decision to act at the EU level, and the data analysis from the INTEREURO Multi-Level Governance Module (MLG) (www.intereuro.eu) reveal three main findings. Firstly, the greatest differentiation among interest organisations (IOs) appears to be between those IOs from the older member states (Germany, the UK and the Netherlands), which exhibit above-average levels of activity, and those from the newer EU member states (Sweden, Slovenia), which exhibit below-average levels of activity. Secondly, the variations in IO activity levels are much greater from country to country than from one policy field to another. Thirdly, although the IOs from all five countries in our study are more likely to employ media and publishing strategies (information politics) than to mobilise their members and supporters (protest politics), we can still observe national patterns in their selection of strategies and in the intensity of their instrumentalisation.

High frequency inverter topologies integrated with the coupled inductor bridge arm

A new topology of the high frequency alternating current (HFAC) inverter bridge arm is proposed which comprises a coupled inductor, a switching device and an active clamp circuit. Based on it, new single-phase and threephase inverters are proposed and their operating states are analysed along with the traditional H-bridge inverter. Multiphase and multi-level isolated inverters are also developed using the HFAC bridge arm. Furthermore, based on the proposed HFAC, a front-end DC-DC converter is also developed for photovoltaic systems to demonstrate the application of the proposed HFAC converter. Simulation and experimental results from prototype converters are carried out to validate the proposed topologies which can be utilised widely in high frequency power conversion applications such as induction heating and wireless power transfer.

The MG Rover closure and policy response: an evaluation of the Task Force model in the UK

In recent years there have been a number of high-profile plant closures in the UK. In several cases, the policy response has included setting up a task force to deal with the impacts of the closure. It can be hypothesised that task force involving multi-level working across territorial boundaries and tiers of government is crucial to devising a policy response tailored to people's needs and to ensuring success in dealing with the immediate impacts of a closure. This suggests that leadership, and vision, partnership working and community engagement, and delivery of high quality services are important. This paper looks at the case of the MG Rover closure in 2005, to examine the extent to which the policy response to the closure at the national, regional and local levels dealt effectively with the immediate impacts of the closure, and the lessons that can be learned from the experience. Such lessons are of particular relevance given the closure of the LDV van plant in Birmingham in 2009 and more broadly – such as in the case of the downsizing of the Opel operation in Europe following its takeover by Magna.

Beyond cultural values? Cultural leadership ideals and entrepreneurship

This paper offers a fresh perspective on national culture and entrepreneurship research. It explores the role of Culturally-endorsed implicit Leadership Theories (CLTs) – i.e., the cultural expectations about outstanding, ideal leadership – on individual entrepreneurship. Developing arguments based on culture-entrepreneurship fit, we predict that charismatic and self-protective CLTs positively affect entrepreneurship. They provide a context that enables entrepreneurs to be co-operative in order to initiate change but also to be self-protective and competitive so as to safeguard their venture and avoid being exploited. We further theorize that CLTs are more proximal drivers of cross-country differences in entrepreneurship as compared with distal cultural values. We find support for our propositions in a multi-level study of 42 countries. Cultural values (of uncertainty avoidance and collectivism) influence entrepreneurship mainly indirectly, via charismatic and self-protective CLTs. We do not find a similar indirect effect for cultural practices.