Identifying the Influence of Channel Morphology on Physical Habitat Availability for Native Fish: Application to the Two-spined Blackfish (Gadopsis bispinosus) in the Cotter River, Australia.

The impact of channel morphology and flow on physical habitat availability for the two-spined blackfish (Gadopsis bispinosus) was assessed in the Cotter River, ACT, Australia. Physical habitat requirements for three life stages were identified based on previous field sampling in the Cotter River. Two sites were selected with contrasting channel morphology: Spur Hole, with a moderate gradient and runs and glides, and Vanity’s Crossing, with a steeper gradient, rapids, and fast-flowing pools. Physical Habitat Simulation System (PHABSIM) was used to simulate the flow v. physical habitat availability relationship for each life stage at both sites. Clear differences were apparent between sites, with Spur Hole characterised by increasing habitat with increasing flow and Vanity’s Crossing showing the opposite relationship. The nature of the channel morphology determined this difference, with Spur Hole characterised by marginal zones becoming inundated at higher flows and providing additional suitable physical habitat as discharge increases. Vanity’s Crossing does not contain similar marginal zones. Further analysis demonstrated that high water velocity was the most important factor limiting physical habitat availability at both sites. This approach demonstrates the importance of channel morphology in determining physical habitat availability and an alternative use of PHABSIM to highlight limiting factors for target species.

Biology and ecology of the white prawn Palaemon longirostris H. Milne Edwards, 1837 (Crustacea, Decapoda, Palaemonidae) in the Mira River, Portugal

Tese de doutoramento, Biologia (Ecografia), Universidade de Lisboa, Faculdade de Ciências, 2014

Effects of sulphurization time on Cu2ZnSnS4 absorbers and thin films solar cells obtained from metallic precursors

We report the results of a study of the sulphurization time effects on Cu2ZnSnS4 absorbers and thin film solar cells prepared from dc-sputtered tackedmetallic precursors. Three different time intervals, 10 min, 30min and 60 min, at maximum sulphurization temperature were considered. The effects of this parameter' change were studied both on the absorber layer properties and on the final solar cell performance. The composition, structure, morphology and thicknesses of the CZTS layers were analyzed. The electrical characterization of the absorber layer was carried out by measuring the transversal electrical resistance of the samples as a function of temperature. This study shows an increase of the conductivity activation energy from 10 meV to 54meV for increasing sulphurization time from 10min to 60min. The solar cells were built with the following structure: SLG/Mo/CZTS/CdS/i-ZnO/ZnO:Al/Ni:Al grid. Several ac response equivalent circuit models were tested to fit impedance measurements. The best results were used to extract the device series and shunt resistances and capacitances. Absorber layer's electronic properties were also determined using the Mott–Schottky method. The results show a decrease of the average acceptor doping density and built-in voltage, from 2.0 1017 cm−3 to 6.5 1015 cm−3 and from 0.71 V to 0.51 V, respectively, with increasing sulphurization time. These results also show an increase of the depletion region width from approximately 90 nm–250 nm.

The Role of Actin-Capping Protein and Src signalling in tissue growth and apoptosis during Drosophila wing development

Dissertation presented to obtain the Ph.D degree in Developmental Biology

Mermithid (nematoa: mermithidae) infections of black flies (Diptera: Simuliidae) : seasonal variation and developmental characteristics /

Mermithid nematodes (Nematoda: Mermithidae) parasitize larval, pupal and adult black flies (Diptera: Simuliidae), oftentimes resulting in partial or complete host feminization. This study was designed to characterize parasite-host seasonal variation and to estabUsh the developmental life stage at which feminization is initiated. Data indicate that the total adult population of black flies collected from Algonquin Provincial Park throughout the spring of 2004 was comprised of 31.8% female, 67.8% male and 0.4% intersex individuals. Of the total population, 0.6% was infected by mermithid nematodes (69.0% female, 3.5% male and 27.6% intersex). Seasonal infection trends established over a 12-month period revealed that black flies with different life histories host the same mermithid subfamilies, while black flies with similar life histories host mermithids from different subfamilies. If a simuliid species simultaneously hosts two mermithid species, these parasites are from different subfamilies. Molecular mermithid identification revealed two mermithid subfamilies, Me.somermithinae and Gastromermithinae, present in the simuliid hosts. Mermithid colour variation was not found to be a reliable species indicator. The developmental stage at which feminization is initiated was determined by examining gonad morphology and meiotic chromosomal condition. Results indicate that mermithid-infected black flies exhibit feminization prior to larval histoblast formation. Larvae can be morphologically male (testes present) or female (ovaries present), with morphological males exhibiting either male (achiasmate) or female (chiasmate) meiotic chromosomes; morphological females were only genetically female. Additionally, mermithid infection inhibits simuliid gonad development.

SYNTHESIS OF CYCLIC AZOBENZENE ANALOGUES FOR INCORPORATION INTO OLIGONUCLEOTIDES, PEPTIDES AND POLYMERS

(A) In recent years, considerable amount of effort has contributed towards enhancing our understanding of the new photoswitch, cyclic azobenzene, particularly from the theoretical point of view. However, the challenging part with this system was poor efficiency of its synthesis from 2,2’- dinitrodibenzyl and lack of effective methods for further modification which would be useful to incorporate this system into biomolecules as a photoswitch. We report the synthesis of cyclic azobenzene and analogues from 2,2’-dinitrodibenzyl, which would allow for further incorporation of this cyclic azobenzene into biomolecules. Reaction of 2,2’-dinitrodibenzyl with zinc metal powder in the presence of triethylammonium formate buffer (pH-9.5) gave a cyclic azoxybenzene, 11,12-dihydrodibenzo[c,g][1,2]diazocine-5-oxide. The latter compound was converted into cyclic azobenzene analogues (bromo-, chloro-, cyano-, and carboxyl) through subsequent transformations. The carboxylic acid analogue was reacted with D-threoninol to give the corresponding amide, which readily undergoes photo-isomerization upon illumination with light. Upon illumination with light at 400 nm, approximately 70% of cis- isomer of amide was isomerized to trans- isomer. It was observed that cis- to trans- isomerization reached the maximum steady state of light transmission after approximately 40 min, whereas the trans- to cis- isomerization approximately acquired in 2 h to regain full recovery of light transmission. Cyclic azobenzene phosphoramidite was synthesized from DMT-protected D-threoninol linked cyclic azobenzene. (B) In recent years, there has been considerable interest invested towards the synthesis of azobenzene analogues for incorporation into proteins. Among the many azobenzene analogues, the synthesis of bi-functional cyclic azobenzene analogues for the incorporation into proteins is relatively new. In this thesis, we report the synthesis of a cyclic azobenzene biscarboxylic acid from 4-(bromomethyl)benzonitrile. (C) Azobenzene has been widely used in the field of polymer science to study the surface morphology and surface properties of polymers. In this thesis, we report the incorporation of cyclic azobenzene into a commercial polymer 2- (hydroxyethyl)methacrylate. Samples collected after 24 h from the reaction solution showed approximately 9% of incorporation of cyclic azobenzene into polymer compared to samples collected after 10 h, which showed approximately 6% incorporation.

Clustering algorithms and shape factor methods to discriminate among small GTPase phenotypes using DIC image analysis.

Naïvement perçu, le processus d’évolution est une succession d’événements de duplication et de mutations graduelles dans le génome qui mènent à des changements dans les fonctions et les interactions du protéome. La famille des hydrolases de guanosine triphosphate (GTPases) similaire à Ras constitue un bon modèle de travail afin de comprendre ce phénomène fondamental, car cette famille de protéines contient un nombre limité d’éléments qui diffèrent en fonctionnalité et en interactions. Globalement, nous désirons comprendre comment les mutations singulières au niveau des GTPases affectent la morphologie des cellules ainsi que leur degré d’impact sur les populations asynchrones. Mon travail de maîtrise vise à classifier de manière significative différents phénotypes de la levure Saccaromyces cerevisiae via l’analyse de plusieurs critères morphologiques de souches exprimant des GTPases mutées et natives. Notre approche à base de microscopie et d’analyses bioinformatique des images DIC (microscopie d’interférence différentielle de contraste) permet de distinguer les phénotypes propres aux cellules natives et aux mutants. L’emploi de cette méthode a permis une détection automatisée et une caractérisation des phénotypes mutants associés à la sur-expression de GTPases constitutivement actives. Les mutants de GTPases constitutivement actifs Cdc42 Q61L, Rho5 Q91H, Ras1 Q68L et Rsr1 G12V ont été analysés avec succès. En effet, l’implémentation de différents algorithmes de partitionnement, permet d’analyser des données qui combinent les mesures morphologiques de population native et mutantes. Nos résultats démontrent que l’algorithme Fuzzy C-Means performe un partitionnement efficace des cellules natives ou mutantes, où les différents types de cellules sont classifiés en fonction de plusieurs facteurs de formes cellulaires obtenus à partir des images DIC. Cette analyse démontre que les mutations Cdc42 Q61L, Rho5 Q91H, Ras1 Q68L et Rsr1 G12V induisent respectivement des phénotypes amorphe, allongé, rond et large qui sont représentés par des vecteurs de facteurs de forme distincts. Ces distinctions sont observées avec différentes proportions (morphologie mutante / morphologie native) dans les populations de mutants. Le développement de nouvelles méthodes automatisées d’analyse morphologique des cellules natives et mutantes s’avère extrêmement utile pour l’étude de la famille des GTPases ainsi que des résidus spécifiques qui dictent leurs fonctions et réseau d’interaction. Nous pouvons maintenant envisager de produire des mutants de GTPases qui inversent leur fonction en ciblant des résidus divergents. La substitution fonctionnelle est ensuite détectée au niveau morphologique grâce à notre nouvelle stratégie quantitative. Ce type d’analyse peut également être transposé à d’autres familles de protéines et contribuer de manière significative au domaine de la biologie évolutive.

Developmental, morphological, and behavioural plasticity in the reproductive strategies of stink bugs and their egg parasitoids

L’environnement façonne la physiologie, la morphologie et le comportement des organismes par l’entremise de processus écologiques et évolutifs complexes et multidimensionnels. Le succès reproducteur des animaux est déterminé par la valeur adaptative d’un phénotype dans un environnement en modification constante selon une échelle temporelle d’une à plusieurs générations. De plus, les phénotypes sont façonnés par l’environnement, ce qui entraine des modifications adaptatives des stratégies de reproduction tout en imposant des contraintes. Dans cette thèse, considérant des punaises et leurs parasitoïdes comme organismes modèles, j’ai investigué comment plusieurs types de plasticité peuvent interagir pour influencer la valeur adaptative, et comment la plasticité des stratégies de reproduction répond à plusieurs composantes des changements environnementaux (qualité de l’hôte, radiation ultraviolette, température, invasion biologique). Premièrement, j’ai comparé la réponse comportementale et de traits d’histoire de vie à la variation de taille corporelle chez le parasitoïde Telenomus podisi Ashmead (Hymenoptera : Platygastridae), démontrant que les normes de réaction des comportements étaient plus souvent positives que celles des traits d’histoires de vie. Ensuite, j’ai démontré que la punaise prédatrice Podisus maculiventris Say (Hemiptera : Pentatomidae) peut contrôler la couleur de ses œufs, et que la pigmentation des œufs protège les embryons du rayonnement ultraviolet; une composante d’une stratégie complexe de ponte qui a évoluée en réponse à une multitude de facteurs environnementaux. Puis, j’ai testé comment le stress thermique affectait la dynamique de la mémoire du parasitoïde Trissolcus basalis (Wollaston) (Hymenoptera : Platygastridae) lors de l’apprentissage de la fiabilité des traces chimiques laissées par son hôte. Ces expériences ont révélé que des températures hautes et basses prévenaient l’oubli, affectant ainsi l’allocation du temps passé par les parasitoïdes dans des agrégats d’hôtes contenant des traces chimiques. J’ai aussi développé un cadre théorique général pour classifier les effets de la température sur l’ensemble des aspects comportementaux des ectothermes, distinguant les contraintes des adaptations. Finalement, j’ai testé l’habileté d’un parasitoïde indigène (T. podisi) à exploiter les œufs d’un nouveau ravageur invasif en agriculture, Halyomorpha halys Stål (Hemiptera : Pentatomidae). Les résultats ont montré que T. podisi attaque les œufs de H. halys, mais qu’il ne peut s’y développer, indiquant que le ravageur invasif s’avère un « piège évolutif » pour ce parasitoïde. Cela pourrait indirectement bénéficier aux espèces indigènes de punaises en agissant comme un puits écologique de ressources (œufs) et de temps pour le parasitoïde. Ces résultats ont des implications importantes sur la réponse des insectes, incluant ceux impliqués dans les programmes de lutte biologique, face aux changements environnementaux.

Radiopaque materials from natural polymers: Special emphasis on chitosan and natural rubber

The present work is to impart radiopacity in various natural polymers like chitosan, natural rubber and derivatives of chitosan and to characterize it. This thesis collated the radiopaque properties of these radiopaque polymers and various technological applications in the medical field. The applications of radiopaque polymers leads to an exploitation of radiopaque properties like X-ray visibility, optical density, effective atomic number, attenuation coefficient of biopolymers like chitosan, chitosan formate, chitosan acetate, carboxy methyl chitosan and natural rubber. The radiopaqe properties of these materials highly depend upon the size, shape, amount of radiopacifier and crystallinity of the radiopaque material. Radiopaque chitosan microspheres were prepared by cross linking with glutaraldehyde followed by the encapsulation of barium sulpahte. The effect of different emulsion systems on the morphology of chitosan microspheres were studied. The study concentrates radiopaque natural rubber for shielding applications. It reveals that to improve the particle size, morphology and crystalline phase of the zinc oxide particles, a novel method for the preparation of zinc oxide is adopted. A detailed radiopacity study was done in natural rubber containing 100phr precipitated zinc oxide prepared from different zinc salts. One of the significant findings of this investigation is that NR vulcanizates containing precipitated zinc oxide (from zinc acetate) shows higher attenuation coefficient. These interesting findings reveal the applications of these natural radiopaque systems in various fields like surgical tools, medical tubings, catheters, radiation shielding,etc.

Polypropylene/metal oxide nanocomposites: fiber spinning and evaluation”

PP has been getting much attention over the years because it is a very durable polymer commonly used in aggressive environments including automotive battery casings, fuel containers etc. They are used to make bottles, fibers for clothing, components in cars etc. However, it has some shortcomings such as low dimensional and thermal stability. Materials such as metal oxides with sizes of the order 1–50 nm have received a great deal of attention because of their versatile applications in polymer/ inorganic nanocomposites, optoelectronic devices, biomedical materials, and other areas. They are stable under harsh process conditions and also regarded as safe materials to human beings and animals. In the present investigation, PP is modified by incorporating metal oxide nanoparticles such as ZnO and TiO2 by simple melt mixing method. Melt spinning method was used to prepare PP/metal oxide nanocomposite fibers. Various studies have been carried out on these composites and fibers. In the first part of the study, ZnO nanoparticles were prepared from ZnCl2 and NaOH in presence of chitosan, PVA, ethanol and starch. This is a simple and inexpensive method compared to other methods. Change in morphology and particle size of ZnO were studied. Least particle size was obtained in chitosan medium. The particles were characterized by using XRD, SEM, TEM, TGA and EDAX. Antibacterial properties of ZnO prepared in chitosan medium (NZO) and commercial zinc oxide (CZO) were evaluated using a gram positive and a gram negative bacteria

Fabrication of a quantum well heterostructure based on plasma polymerized aniline and its characterization using STM/STS

Two-dimensional electronic systems play a crucial role in modern electronics and offer a multitude of opportunities to study the fundamental phenomena at low dimensional physics. A quantum well heterostructure based on polyaniline (P) and iodine doped polyaniline (I) thin films were fabricated using radio frequency plasma polymerization on indium tin oxide coated glass plate. Scanning probe microscopy and scanning electron microscopy studies were employed to study the morphology and roughness of the polymer thin films. Local electronic density of states (LDOS) of the P–I–P heterostructures is probed using scanning tunnelling spectroscopy (STS). A step like LDOS is observed in the P–I–P heterostructure and is attributed to the quantum well confinement of electrons in the polymer heterostructure.

Context Mediation in the Semantic Web: Handling OWL Ontology and Data Disparity through Context Interchange

The COntext INterchange (COIN) strategy is an approach to solving the problem of interoperability of semantically heterogeneous data sources through context mediation. COIN has used its own notation and syntax for representing ontologies. More recently, the OWL Web Ontology Language is becoming established as the W3C recommended ontology language. We propose the use of the COIN strategy to solve context disparity and ontology interoperability problems in the emerging Semantic Web – both at the ontology level and at the data level. In conjunction with this, we propose a version of the COIN ontology model that uses OWL and the emerging rules interchange language, RuleML.

Como os nossos filhos aprendem a falar? : percurso de aquisição da Língua Portuguesa falada no Brasil

Esta investigação teve como objetivo descrever o percurso de aquisição da Língua Portuguesa falada no Brasil. Como base teórica, adotamos um referencial múltiplo, com abordagem das teorias behaviorista, inatista, cognitivista piagetiana, sócio-interacionista e emergentista, no intuito de buscar em cada uma delas as contribuições que nos auxiliassem no estudo da aquisição da linguagem. Trata-se de um estudo longitudinal em que registramos quinzenalmente em áudio o desenvolvimento linguístico de duas crianças brasileiras, desde a idade de 1;00 até 5;00. Os dados obtidos receberam transcrição fonética e/ou ortográfica e foram analisados nos aspectos fonológico, morfológico e sintático. Na área da fonologia, apresentamos o percurso de aquisição dos fonemas, os fonemas de difícil pronunciação e as estratégias de reparo usadas pelas crianças. Na morfologia, descrevemos o processo de aprendizagem dos morfemas flexivos nominais e verbais. Na sintaxe, apresentamos o caminho percorrido pelas crianças na construção das orações simples e dos diversos tipos de orações compostas. De modo geral, observamos um processo de aprendizagem lenta e gradual, em que provavelmente interatuam fatores de ordem biológica, cognitiva, social e linguística, marcado por elevações e regressões indicativas de uma auto-regulação do sistema-que-aprende.

Ex Vivo Construction of an Artificial Ocular Surface by Combination of Corneal Limbal Epithelial Cells and a Compressed Collagen Scaffold Containing Keratocytes

We have investigated the use of a laminin coated compressed collagen gel containing corneal fibroblasts (keratocytes) as a novel scaffold to support the growth of corneal limbal epithelial stem cells. The growth of limbal epithelial cells was compared between compressed collagen gel and a clinically proven conventional substrate, denuded amniotic membrane. Following compression of the collagen gel, encapsulated keratocytes remained viable and scanning electron microscopy showed that fibres within the compressed gel were dense, homogeneous and similar in structure to those within denuded amniotic membrane. Limbal epithelial cells were successfully expanded upon the compressed collagen resulting in stratified layers of cells containing desmosome and hemidesmosome structures. The resulting corneal constructs of both the groups shared a high degree of transparency, cell morphology and cell stratification. Similar protein expression profiles for cytokeratin 3 and cytokeratin 14 and no significant difference in cytokeratin 12 mRNA expression levels by real time PCR were also observed. This study provides the first line of evidence that a laminin coated compressed collagen gel containing keratocytes can adequately support limbal epithelial cell expansion, stratification and differentiation to a degree that is comparable to the leading conventional scaffold, denuded amniotic membrane.

A healable supramolecular polymer blend based on aromatic π-π stacking and hydrogen bonding interactions

An elastomeric, supramolecular healable polymer blend, comprising a chain-folding polyimide and a telechelic polyurethane with pyrenyl endgroups, is compatibilised by aromatic π−π stacking between the π-electron-deficient diimide groups and the π-electron-rich pyrenyl units. This inter-polymer interaction is key to forming a tough, healable, elastomeric material. Variable temperature FTIR analysis of the bulk material also conclusively demonstrates the presence of hydrogen bonding, which complements the π–π stacking interactions. Variable temperature SAXS analysis shows that the healable polymeric blend has a nanophase-separated morphology, and that the X-ray contrast between the two types of domain increases with increasing temperature, a feature that is repeatable over several heating and cooling cycles. A fractured sample of this material reproducibly regains more than 95% of the tensile modulus, 91% of the elongation to break, and 77% of the modulus of toughness of the pristine material.