Gabor-based region covariance matrices for face recognition

This paper presents a new method for human face recognition by utilizing Gabor-based region covariance matrices as face descriptors. Both pixel locations and Gabor coefficients are employed to form the covariance matrices. Experimental results demonstrate the advantages of this proposed method.

Directly unproductive schooling:how country characteristics affect the impact of schooling on growth

The rapid rise in schooling in developing countries in recent decades has been dramatic. However, many cross-country regression analyses of the impact of schooling on economic growth find low and insignificant coefficients. This empirical 'puzzle' contrasts with theoretical arguments that schooling, through raising human capital, should raise income levels. This paper argues that poor results are to be expected when regression samples include countries that vary greatly in their ability to use schooling productively. Data on corruption, the black market premium on foreign exchange and the extent of the brain drain for developing countries are used as indicators of an economy's productive use of schooling. Regression analysis shows that the impact of secondary schooling on economic growth is substantially higher in countries that are adjudged to use schooling productivity.

Blank beam fabrication of regenerated type IA gratings

We demonstrate an idealized method for the fabrication of regenerated type IA fibre Bragg gratings using commonly available apparatus. We use this technique to show that gratings written in the same fibre with the same period may have central wavelengths which are 14.4 nm apart and have an + 11.5% and - 1.2% difference in temperature and strain coefficients, respectively. We use these results to show that temperature compensated dual grating sensor heads, of an arbitrary length, may be quickly and consistently manufactured. © 2004 IOP Publishing Ltd.

Freezing process optimisation of pharmaceutical formulations for freeze drying

The body of work presented in this thesis are in three main parts: [1] the effect of ultrasound on freezing events of ionic systems, [2] the importance of formulation osmolality in freeze drying, and [3] a novel system for increasing primary freeze drying rate. Chapter 4 briefly presents the work on method optimisation, which is still very much in its infancy. Aspects of freezing such as nucleation and ice crystal growth are strongly related with ice crystal morphology; however, the ice nucleation process typically occurs in a random, non-deterministic and spontaneous manner. In view of this, ultrasound, an emerging application in pharmaceutical sciences, has been applied to aid in the acceleration of nucleation and shorten the freezing process. The research presented in this thesis aimed to study the effect of sonication on nucleation events in ionic solutions, and more importantly how sonication impacts on the freezing process. This work confirmed that nucleation does occur in a random manner. It also showed that ultrasonication aids acceleration of the ice nucleation process and increases the freezing rate of a solution. Cryopreservation of animal sperm is an important aspect of breeding in animal science especially for endangered species. In order for sperm cryopreservation to be successful, cryoprotectants as well as semen extenders are used. One of the factors allowing semen preservation media to be optimum is the osmolality of the semen extenders used. Although preservation of animal sperm has no relation with freeze drying of pharmaceuticals, it was used in this thesis to make a case for considering the osmolality of a formulation (prepared for freeze drying) as a factor for conferring protein protection against the stresses of freeze drying. The osmolalities of some common solutes (mostly sugars) used in freeze drying were determined (molal concentration from 0.1m to 1.2m). Preliminary investigation on the osmolality and osmotic coefficients of common solutes were carried out. It was observed that the osmotic coefficient trend for the sugars analysed could be grouped based on the types of sugar they are. The trends observed show the need for further studies to be carried out with osmolality and to determine how it may be of importance to protein or API protection during freeze drying processes. Primary drying is usually the longest part of the freeze drying process, and primary drying times lasting days or even weeks are not uncommon; however, longer primary drying times lead to longer freeze drying cycles, and consequently increased production costs. Much work has been done previously by others using different processes (such as annealing) in order to improve primary drying times; however, these do not come without drawbacks. A novel system involving the formation of a frozen vial system which results in the creation of a void between the formulation and the inside wall of a vial has been devised to increase the primary freeze drying rate of formulations without product damage. Although the work is not nearly complete, it has been shown that it is possible to improve and increase the primary drying rate of formulations without making any modifications to existing formulations, changing storage vials, or increasing the surface area of freeze dryer shelves.

Seagrass sediments as a global carbon sink: Isotopic constraints

Seagrass meadows are highly productive habitats found along many of the world's coastline, providing important services that support the overall functioning of the coastal zone. The organic carbon that accumulates in seagrass meadows is derived not only from seagrass production but from the trapping of other particles, as the seagrass canopies facilitate sedimentation and reduce resuspension. Here we provide a comprehensive synthesis of the available data to obtain a better understanding of the relative contribution of seagrass and other possible sources of organic matter that accumulate in the sediments of seagrass meadows. The data set includes 219 paired analyses of the carbon isotopic composition of seagrass leaves and sediments from 207 seagrass sites at 88 locations worldwide. Using a three source mixing model and literature values for putative sources, we calculate that the average proportional contribution of seagrass to the surface sediment organic carbon pool is ∼50%. When using the best available estimates of carbon burial rates in seagrass meadows, our data indicate that between 41 and 66 gC m−2 yr−1 originates from seagrass production. Using our global average for allochthonous carbon trapped in seagrass sediments together with a recent estimate of global average net community production, we estimate that carbon burial in seagrass meadows is between 48 and 112 Tg yr−1, showing that seagrass meadows are natural hot spots for carbon sequestration.

Environmental controls on bioturbation processes in marine benthic habits

Through bioturbation, the macrofauna mediate chemical, physical and biological processes in marine benthic ecosystems. Because of the importance of bioturbation as ecosystem mediator, various studies have been conducted on bioturbation intensity and depth, and the relation of bioturbation processes to environmental condition and ecosystem state. This thesis builds on those previous studies, using a standard field and analytical protocol and by expanding the geographical scale to three climatic regions along Canada’s East Coast and Arctic margins, the Arctic Archipelago, the coastal Subarctic (Labrador Fjords), and the temperate continental climate zone (Gulf of Maine and adjacent Scotian shelf/slope). This Ph.D. study provides a comprehensive assessment of environmental influences on bioturbation along gradients in latitude and ocean depth. Bioturbation intensity, mixing depth, and bioturbation structures were studied in relation to the quantity and quality of potential food sources (organic matter) and substrate characteristics to gain an understanding of the environmental controls on bioturbation in these regions. The three main research chapters of this thesis are divided based on the contrasting climatic and geographical regions studied. The analytical approach included seabed sampling with a boxcorer, describing the sedimentary fabric and bioturbation structures by X-radiography, estimating bioturbation intensity and depth applying a biodiffusion model to particle tracer profiles of ²¹⁰Pbₓs, ²²⁸Thₓs, ²³⁴Thₓs, and chlorophyll-a, and analyzing benthic organic matter and substrate characteristics. Strong regional and cross-climatic relations of bioturbation processes with combinations of environmental factors were observed. In particular, bioturbation depth and the vertical extent of bioturbation structures responded to the environmental patterns observed and, therefore, represented potentially applicable predictors of environmental conditions and ecosystem state. The results of this Ph.D. study may be further extended to other geographical regions with similar environmental characteristics to predict the effects of benthic habitat alterations through environmental stresses on a global scale. Integrated with biological data produced by fellow CHONe scientists the presented data may provide valuable information about functional roles of macrofaunal species and community traits in marine benthic ecosystems along Canada’s extensive East Coast and Arctic margins.

Time-domain simulation of wave-induced ship motions by a Rankine panel method

In this thesis, a numerical program has been developed to simulate the wave-induced ship motions in the time domain. Wave-body interactions have been studied for various ships and floating bodies through forced motion and free motion simulations in a wide range of wave frequencies. A three-dimensional Rankine panel method is applied to solve the boundary value problem for the wave-body interactions. The velocity potentials and normal velocities on the boundaries are obtained in the time domain by solving the mixed boundary integral equations in relation to the source and dipole distributions. The hydrodynamic forces are calculated by the integration of the instantaneous hydrodynamic pressures over the body surface. The equations of ship motion are solved simultaneously with the boundary value problem for each time step. The wave elevation is computed by applying the linear free surface conditions. A numerical damping zone is adopted to absorb the outgoing waves in order to satisfy the radiation condition for the truncated free surface. A numerical filter is applied on the free surface for the smoothing of the wave elevation. Good convergence has been reached for both forced motion simulations and free motion simulations. The computed added-mass and damping coefficients, wave exciting forces, and motion responses for ships and floating bodies are in good agreement with the numerical results from other programs and experimental data.

Radionuclides measured on 21 water bottle profiles during POLARSTERN cruise ANT-XXIV/3

Drake Passage is a major route for many water masses from the strong Antarctic Circumpolar Current. During the ANTXXIV-3 expedition (in 2008) the vertical distributions of dissolved and size-fractionated particulate 231Pa and thorium isotopes (230Th, 232Th and 234Th) were investigated in order to better define the scavenging regimes and the effects of the oceanic circulation on the fate of particulate material and on the Pa-Th distributions in the water column. The reversible scavenging-model applied to both 230Th and 234Th, in the upper 1500 m depth, gives estimates of the particle dynamics (settling velocities S~ 500-1300 m/y, adsorption and desorption rate constants of 0.1-0.4 1/y and 1-6 1/y respectively). Particulate 234Th/230Th activity ratio shows a depth dependence, with decreasing ratio with increasing depth in agreement with previous studies, but no relationship with particle size was found. 231Pa and thorium isotope fractionation and partition coefficients were investigated with particle size vs depth and latitude and appear to vary horizontally following a North-South gradient. This suggests that both radionuclides are mostly bound to the fine suspended particles. At Drake Passage, the 230Thxs distribution is controlled by a southward upwelling of deep water (clearly visible on the vertical section of total 230Thxs, defined as dissolved + particulate concentrations) and reversible-scavenging processes (linear increase of 230Thxs with increasing depth) with North of the Southern ACC Front, higher settling velocities and less adsorption/desorption cycles, than South of it. Distributions of dissolved and total 231Paxs also reflect the influence of the North-South upwelling but somehow this effect appears to be limited to the upper 1500 m depth of the water column. Below this depth, 231Paxs vertical profiles exhibit contrasted concentrations, with some high dissolved activities in the deep water of the stations in the northern part of the ACC and not South of the ACC. These N-S differences in dissolved 231Paxs were attributed to the different origins and scavenging history of the deep Pacific waters flowing across Drake Passage. Here at North, radionuclides-rich deep water originates from the Central Pacific, while at South, deep water derives from the Southern Pacific in which the observed low radionuclides concentrations are attributed to high opal abundance. South of the Drake Passage, high dissolved and particulate activities of 230Th and 232Th confirmed the intrusion of 230Th-rich Weddell Sea Deep Water (WSDW) close to the Antarctic Peninsula.

Escala diagramática e influência de sistemas de produção na ocorrência do crestamento gomoso da melancia

CHAPTER 1 - The gummy stem blight, caused by the fungus D. bryoniae, is a disease commonly found in watermelon cultivated in several countries. In Brazil, there are numerous studies related to the disease, but there are not uniform methods for quantifying of disease severity in the field. Thus, we developed a diagrammatic scale based on scanned photos of watermelon leaves infected with D. bryoniae. The scale developed showed levels of 0; 10; 20; 45; 65 and 90% of severity. The scale validation was divided into two parts: initially, 10 evaluators (half with experienced and other half without experience) estimated the disease severity based on the initial observation of 100 photos of watermelon leaves with symptoms of the disease at different severity levels. Before, the same evaluators estimated the disease severity with the support of the scale prepared from the Quant program. Data were analyzed using linear regression and were obtained angular, linear, and correlation coefficients. Based on these data, we determined the accuracy and precision of the evaluations. The correlation coefficients (R2) ranged from 0.88 - 0.97 for the experienced evaluators and from 0.55 - 0.95 for the inexperienced evaluators. The average angular coefficient (A) for inexperienced evaluators was 20.42 and 8.61 with and without the support of diagrammatic scale, respectively. Experienced evaluators showed values of average linear coefficient of 5.30 and 1.68 with and without the support of diagrammatic scale, respectively. The absolute errors analysis indicated that the use of diagrammatic scale contributed to minimize the flaws in the severity levels estimation. The diagrammatic scale proposed shown adequate for gummy stem blight severity evaluation in watermelon. CHAPTER 2 - The gummy stem blight (Didymella bryoniae) is a disease that affects the productivity of watermelon leading to losses over 40%. This study aimed to evaluate the efficiency of different production systems in control of gummy stem blight in watermelon for to establish efficient methods to combat the disease. There were applied the following treatments: conventional tillage (T1), integrated management (T2) and organic management (T3). In T1 and T2 were applied mineral fertilization and T3 was used bovine manure. There was application of fungicides and insecticides in commercial dose in T1 and T2, being after soil chemical analysis in T2. Disease severity was assessed by grading scale. The experimental design was randomized blocks. The severity of gummy stem blight has increased substantially during the fruit formation. Watermelon plants grown with integrated management (T2) showed lower levels of disease severity, while plants in organic management (T3) exhibited higher levels of severity. We conclude that management based on judicious accompaniments in field represents best way to achieve the phytosanitary aspect adequate for cultivation of watermelon in Tocantins.

Influência das alturas iniciais de pasto diferido na recria de cordeiros sobre o desempenho na terminação em confinamento

The objective of this study was to evaluate the productive performance, metabolic and feeding behavior of sheep after ninety days deferred pasture at different heights. The experiment was conducted at Capim Branco experimental farm of the Universidade Federal de Uberlândia. During the period of 90 days, from June to September 2013, forty-eight crossbred lambs Santa Inês x Dorper, divided into groups of four animals, occupied twelve pickets deferred pasture with four initial heights (15 cm, 25 cm, 35 cm and 45 cm). During this period we evaluated the structural characteristics of pasture. For confinement, from September to December 2013, 32 of these animals were used (16 males and 16 females), divided into four bays, separated as pasture were using. The consumption was assessed daily, while biometric measurements were made every 21 days. In relation to gender, there were differences in average daily gain weight. Reviews of feeding behavior occurred at the beginning, middle and end of the experiment for 24 hours. The rumination and leisure activities do not present statistical differences, both initial height of pasture and by period. The time spent on intake was higher during the daytime both treatments starting height as the experimental periods, however, rumination activity was more intense at night. Blood glucose was achieved in five periods of the day, while other metabolites have been obtained with a collection made fortnightly. The different initial heights not promoted effects on blood glucose. The harvesting times were not affected. However, there was a reduction of basal blood glucose of animals throughout the experimental period. There was a significant interaction between the initial pasture heights and periods of evaluation of basal glucose. Cholesterol and triglyceride levels were below recommended levels, however the final phase of confinement cholesterol level increased significantly. The values of VLDL and GGT were above the reference range. FA and AST showed average values within the recommended values. Total protein was influenced by different initial heights of pasture. The creatinine and albumin had values below the recommended range. Moreover, the albumin decreased during the confinement time. Uric acid showed close to the recommended maximum. There was stabilization of compensatory growth, with modification of consumption and weight gain at 45 days of experiment.

A tight-binding analysis of the electronic properties of III-nitride semiconductors

This thesis divides into two distinct parts, both of which are underpinned by the tight-binding model. The first part covers our implementation of the tight-binding model in conjunction with the Berry phase theory of electronic polarisation to probe the atomistic origins of spontaneous polarisation and piezoelectricity as well as attempting to accurately calculate the values and coefficients associated with these phenomena. We first develop an analytic model for the polarisation of a one-dimensional linear chain of atoms. We compare the zincblende and ideal wurtzite structures in terms of effective charges, spontaneous polarisation and piezoelectric coefficients, within a first nearest neighbour tight-binding model. We further compare these to real wurtzite structures and conclude that accurate quantitative results are beyond the scope of this model but qualitative trends can still be described. The second part of this thesis deals with implementing the tight-binding model to investigate the effect of local alloy fluctuations in bulk AlGaN alloys and InGaN quantum wells. We calculate the band gap evolution of Al1_xGaxN across the full composition range and compare it to experiment as well as fitting bowing parameters to the band gap as well as to the conduction band and valence band edges. We also investigate the wavefunction character of the valence band edge to determine the composition at which the optical polarisation switches in Al1_xGaxN alloys. Finally, we examine electron and hole localisation in InGaN quantum wells. We show how the built-in field localises the carriers along the c-axis and how local alloy fluctuations strongly localise the highest hole states in the c-plane, while the electrons remain delocalised in the c-plane. We show how this localisation affects the charge density overlap and also investigate the effect of well width fluctuations on the localisation of the electrons.

Geological reference standards (JLK-1,JSD-1, JSD-2, JSD-3,JMS-1, JMS-2) measured by Itrax-XRF core scanner in different exposure times

X-ray fluorescence (XRF) core-scanning is a fast and nondestructive technique to assess elemental variations of unprocessed sediments. However, although the exposure time of XRF-scanning directly affects the scanning counts and total measurement time, only a few studies have considered the influence of exposure time during the scan. How to select an optimal exposure time to achieve reliable results and reduce the total measurement time is an important issue. To address this question, six geological reference materials from the Geological Survey of Japan (JLK-1, JMS-1, JMS-2, JSD-1, JSD-2, and JSD-3) were scanned by the Itrax-XRF core scanner using the Mo- and the Cr-tube with different exposure times to allow a comparison of scanning counts with absolute concentrations. The regression lines and correlation coefficients of elements that are generally used in paleoenvironmental studies were examined for the different exposure times and X-ray tubes. The results show that for those elements with relatively high concentrations or high detectability, the correlation coefficients are higher than 0.90 for all exposure times. In contrast, for the low detectability or low concentration elements, the correlation coefficients are relatively low, and improve little with increased exposure time. Therefore, we suggest that the influence of different exposure times is insignificant for the accuracy of the measurements. Thus, caution must be taken when interpreting the results of elements with low detectability, even when the exposure times are long and scanning counts are reasonably high.

Results of Closed-Flow Column Experiments (zip-archive 2.3 MB)

The identification of transport parameters by inverse modeling often suffers from equifinality or parameter correlation when models are fitted to observations of the solute breakthrough in column outflow experiments. This parameters uncertainty can be approached by the application of multiple experimental designs such as column experiments in open-flow mode and the recently proposed closed-flow mode. Latter are characterized by the recirculation of the column effluent into the solution supply vessel that feeds the inflow. Depending on the experimental conditions, the solute concentration in the solution supply vessel and the effluent follows a damped sinusoidal oscillation. As a result, the closed-flow experiment provides additional observables in the breakthrough curve. The evaluation of these emergent features allows intrinsic control over boundary conditions and impacts the uncertainty of parameters in inverse modeling. We present a comprehensive sensitivity analysis to illustrate the potential application of closed-flow experiments. We show that the sensitivity with respect to the apparent dispersion can be controlled by the experimenter leading to a decrease in parameter uncertainty as compared to classical experiments by an order of magnitude for optimal settings. With these finding we are also able to reduce the equifinality found for situations, where rate-limited interactions impede a proper determination of the apparent dispersion and rate coefficients. Furthermore, we show the expected breakthrough curve for equilibrium and kinetic sorption, the latter showing strong similarities to the behavior found for completely mixed batch reactor experiments. This renders the closed-flow mode a useful complementary approach to classical column experiments.