Mesoionic pyridopyrimidinylium and pyridooxazinylium olates and non-mesoionic pyridopyrimidinones. Structures in the solid state, solution, and matrices

X-Ray crystal structures, C-13 NMR spectra and theoretical calculations (B3LYP/6-31G*) are reported for the mesoionic (zwitterionic) pyridopyrimidinylium- and pyridooxazinyliumolates 2a, 3a and 5a,b as well as the enol ether 11b and the enamine 11c. The 1-NH compounds like 1a, 2a and 3a exist in the mesoionic form in the crystal and in solution, but the OH tautomers such as 1b and 2b dominate in the gas phase as revealed by the Ar matrix IR spectra in conjunction with DFT calculations. All data indicate that the mesoionic compounds can be regarded as intramolecular pyridine-ketene zwitterions (cf. 16 --> 17) with a high degree of positive charge on the pyridinium nitrogen, a long pyridinium N-CO bond (ca. 1.44-1.49 Angstrom), and normal C=O double bonds (ca. 1.22 Angstrom). All mesoionic compounds exhibit a pronounced tilting of the olate C=O groups (the C=O groups formally derived from a ketene) towards the pyridinium nitrogen, giving NCO angles of 110-118 degrees. Calculations reveal a hydrogen bond with 6-CH, analogous to what is found in ketene-pyridine zwitterions and the C3O2-pyridine complex. The 2-OH tautomers of type 1b, 2b, and 11 also show a high degree of zwitterionic character as indicated by the canonical structures 11 12.

Signatures of the pair-coherent state

We explore in detail the possibility of generating a pair-coherent state in the nondegenerate parametric oscillator when decoherence is included. Such states are predicted in the transient regime in parametric oscillation where the pump mode is adiabatically eliminated. Two specific signatures are examined to indicate whether the state of interest has been generated, the Schrodinger cat state-like signatures, and the fidelity. Solutions in a transient regime reveal interference fringes which are indicative of the formation of a Schrodinger cat state. The fidelity indicates the purity of our prepared state compared with the ideal pair-coherent state.

Assessing perceived need for mental health care in a community survey: development of the Perceived Need for Care Questionnaire (PNCQ)

Background: The Perceived Need for Care Questionnaire (PNCQ) was designed for the Australian National Survey of Mental Health and Wellbeing. The PNCQ complemented collection of data on diagnosis and disability with the survey participants' perceptions of their needs for mental health care and the meeting of those needs. The four-stage design of the PNCQ mimics a conversational exploration of the topic of perceived needs. Five categories of perceived need are each assigned to one of four levels of perceived need (no need, unmet need, partially met need and met need). For unmet need and partially met need, information on barriers to care is collected, Methods: Inter-rater reliabilities of perceived needs assessed by the PNCQ were examined in a study of 145 anxiety clinic attenders. Construct validity of these items was tested, using a multi-trait multi-method approach and hypotheses regarding extreme groups, in a study with a sample of 51 general practice and community psychiatric service patients. Results: The instrument is brief to administer and has proved feasible for use in various settings. Inter-rater reliabilities for major categories, measured by the kappa statistic, exceeded 0.60 in most cases; for the summary category of all perceived needs, inter-rater reliability was 0.62. The multi-trait multi-method approach lent support to the construct validity of the instrument, as did findings in extreme groups. Conclusions: The PNCQ shows acceptable feasibility, reliability and validity, adding to the range of assessment tools available for epidemiological and health services research.

Entangled coherent-state qubits in an ion trap

We show how entangled qubits can be encoded as entangled coherent states of two-dimensional center-of-mass vibrational motion for two ions in an ion trap. The entangled qubit state is equivalent to the canonical Bell state, and we introduce a proposal for entanglement transfer from the two vibrational modes to the electronic states of the two ions in order for the Bell state to be detected by resonance fluorescence shelving methods.

Personality disorders in the community: a report from the Australian national survey of mental health and wellbeing

Background: The first set of aims of the present study was to determine the prevalence of personality disorders (PDs) in a nation, and gender differences in the types and numbers of PDs endorsed. The second set of aims was to establish the relationship of PD to other, non-PD disorders, physical conditions, and disability. Method: Data were obtained from the Australian National Survey of Mental Health and Wellbeing, conducted between May and August 1997. A stratified random sample of households was generated, from which all those aged 18 or over were considered potential interviewees. There were 10,641 respondents to the survey, and this represented a response rate of 78%. Each interviewee was asked 59 questions indexing specific ICD-10 PD criteria. Results: Of the total survey sample, 704 persons had at least one PD. Using weighted replicate weights, it was estimated that approximately 6.5% of the adult population of Australia have one or more PDs (lifetime prevalence). Persons with PD were more likely to be younger, male, and not married, and to have an anxiety disorder, an affective disorder, a substance use disorder, or a physical condition. They were also more likely to have greater disability than those without PD. Conclusion: The study is the first nationwide survey of mental disorders conducted within Australia. It provides an estimate of the prevalence of the various types of PD. The survey has considerable limitations, however, and these are discussed.

The role of economic evaluation in mental health care

Objective: A consequence of the integration of psychiatry into acute and public health medicine is that psychiatrists are being asked to evaluate their services. There is pressure on mental health-care systems because it is recognized that funds should be directed where they can provide the best health outcomes, and also because there are resource constraints which limit our capacity to meet all demands for health care. This pressure can be responded to by evaluation which demonstrates the effectiveness and efficiency of psychiatric treatment. This paper seeks to remind psychiatrists of the fundamental principles of economic evaluation in the hope that these will enable psychiatrists to understand the methods used in evaluation and to work comfortably with evaluators. Method: The paper reviews the basic principles behind economic evaluation, illustrating these with reference to case studies. It describes: (i) the cost of the burden of illness and treatment, and how these costs are measured; (ii) the measurement of treatment outcomes, both as changes in health status and as resources saved; and (iii) the various types of economic evaluation, including cost-minimization, cost-effectiveness, cost-utility and cost-benefit analysis. Results: The advice in the paper provides psychiatrists with the necessary background to work closely with evaluators. A checklist of the critical questions to be addressed is provided as a guide for those undertaking economic evaluations. Conclusions: If psychiatrists are willing to learn the basic principles of economic evaluation and to apply these, they can respond to the challenges of evaluation.

Simultaneous steady state and dynamic design of process systems using structural indicators

The simultaneous design of the steady-state and dynamic performance of a process has the ability to satisfy much more demanding dynamic performance criteria than the design of dynamics only by the connection of a control system. A method for designing process dynamics based on the use of a linearised systems' eigenvalues has been developed. The eigenvalues are associated with system states using the unit perturbation spectral resolution (UPSR), characterising the dynamics of each state. The design method uses a homotopy approach to determine a final design which satisfies both steady-state and dynamic performance criteria. A highly interacting single stage forced circulation evaporator system, including control loops, was designed by this method with the goal of reducing the time taken for the liquid composition to reach steady-state. Initially the system was successfully redesigned to speed up the eigenvalue associated with the liquid composition state, but this did not result in an improved startup performance. Further analysis showed that the integral action of the composition controller was the source of the limiting eigenvalue. Design changes made to speed up this eigenvalue did result in an improved startup performance. The proposed approach provides a structured way to address the design-control interface, giving significant insight into the dynamic behaviour of the system such that a systematic design or redesign of an existing system can be undertaken with confidence.

The burden of mental disorders in Victoria, 1996

Background: Between 1998 and 1999, a burden of disease assessment was carried out in Victoria, Australia applying and improving on the methods of the Global Burden of Disease Study. This paper describes the methods and results of the calculations of the burden due to 22 mental disorders, adding 14 conditions not included in previous burden of disease estimates, Methods: The National Survey of Mental Health and Wellbeing provided recent data on the occurrence of the major adult mental disorders in Australia. Data from international studies and expert advice further contributed to the construction of disease models, describing each condition in terms of incidence, average duration and level of severity, with adjustments for comorbidity with other mental disorders. Disability weights for the time spent in different states of mental ill health were borrowed mainly from a study in the Netherlands, supplemented by weights derived in a local extrapolation exercise. Results: Mental disorders were the third largest group of conditions contributing to the burden of disease in Victoria, ranking behind cancers and cardiovascular diseases. Depression was the greatest cause of disability in both men and women. Eight other mental disorders in men and seven in women ranked among the top twenty causes of disability. Conclusions: Insufficient information on the natural history of many of the mental disorders, the limited information on the validity of mental disorder diagnoses in community surveys and considerable differences between ICD-10 and DSM-IV defined diagnoses were the main concerns about the accuracy of the estimates. Similar and often greater concerns have been raised in relation to the estimation of the burden from common non-fatal physical conditions such as asthma, diabetes and osteoarthritis. In comparison, psychiatric epidemiology can boast greater scientific rigour in setting standards for population surveys.

Characteristics of DSM-IV and ICD-10 cannabis dependence among Australian adults: results from the National Survey of Mental Health and Wellbeing

A representative sample (n = 10 641) of Australian adults completed a structured diagnostic interview assessing the prevalence of mental and substance use disorders in the last year. The prevalence of DSM-IV (1.5%) and ICD-10 (1.7%) cannabis dependence was similar. DSM-IV and ICD-10 dependence criteria comprised unidimensional syndromes. The most common symptoms among dependent and non-dependent users were difficulties with controlling use and withdrawal, although there were marked differences in symptom prevalence. Dependent users reported a median of four symptoms. There was good to excellent diagnostic concordance (kappas = 0.7-0.9) between systems for dependence but not for abuse/harmful use (Y = 0.4). These findings provide some support for the validity of cannabis dependence. (C) 2001 Elsevier Science Ireland Ltd. All rights reserved.