Avaliação do potencial eólico da zona de Évora - Contribuição para a redução de emissões de CO2

Neste trabalho é analisado o potencial eólico da região de Évora, tendo sido considerados quatro locais: Mitra, Portel, Reguengos e Colégio Verney. Com os dados de potência obtidos, foram escolhidas duas turbinas existentes no mercado, de potências nominais diferentes, para uma análise mais objectiva do real potencial da região. Apurou-se que, com a instalação de três turbinas menores, se obtém praticamente a mesma potência, por um preço consideravelmente inferior. Foi ainda possível verificar-se que a quantidade evitada de C02 para a atmosfera, ao considerar uma turbina de 5000 W (B) ou três 1000 W (A), é semelhante, concluindo-se que, considerando a eficiência, potencial, preço e emissões de co2 evitadas, a instalação de diversas turbinas A é a melhor opção. Este trabalho reveste-se de particular interesse considerando o facto de ser do conhecimento geral que, nas regiões costeiras e montanhosas, o potencial eólico está bastante estudado, ao passo que nas regiões interiores tal não acontece. ABSTRACT: ln this work, we assess the potential wind power in Évora, and four locations have been considered: Mitra, Portel, Reguengos and Évora. Based on the local wind power potential, two kinds of turbines were selected, for a more objective analysis of the region's useful wind power. It was found that the option for three small turbines allows the extraction of the same wind power that is extracted by the bigger turbine and at a considerably lower installation cost. lt was also found that the reduction in co2 emissions to the atmosphere, when considering the cases of one 5000 W (B) turbine and three 1000 W (A) turbines, is similar, therefore was concluded that, given the efficiency, potential, price and reduction of C02 emissions, the installation of several A turbines is the best option. This work is of particular interest because in coastal and mountain areas the wind potential is quite known, while this is not the case of inland areas.

Dispersão de sementes por aves na galeria ripícola e matriz envolvente

As galerias ripícolas são habitats com uma grande disponibilidade de recursos alimentares e abrigo para a fauna, estando entre os habitats mais importantes e vulneráveis do mundo. São uma fonte de produção de frutos, o que atrai muitos animais, como as aves frugívoras, que são os principais dispersores de sementes na bacia do Mediterrâneo. O objetivo principal deste estudo foi estudar os padrões de dispersão de sementes por aves na interface galeria ripícola-matriz florestal envolvente (Montado). Foram marcadas com fluorescência plantas-mãe produtoras de frutos, e utilizadas armadilhas para sementes e transectos, para a recolha dos dejetos de aves onde, posteriormente, se detetaram as sementes dispersadas. Constatou-se que a dispersão de sementes e a abundância de plantas-mãe foi superior a distâncias mais próximas da ribeira, diminuindo à medida que esta distância aumenta. A espécie mais dispersada foi Smilax aspera e as espécies com sementes de menor dimensão, foram dispersadas a uma maior distância da planta-mãe, provavelmente devido a este tipo de sementes permanecerem mais tempo no trato intestinal das aves. Os resultados deste estudo apresentam algumas implicações para a colonização da matriz adjacente por plantas produtoras de frutos; ABSTRACT: Riparian galleries are habitats with a large availability food resources and shelter for animals, being among the most important and vulnerable habitats in the world. These zones are a great source of fruits attracting many animals, such as frugivorous birds, which are the main seed dispersers in the Mediterranean basin. The objective of this thesis is the study of seed dispersal patterns by birds, in the riparian gallery and in the surrounding forest matrix (Montado). Fruits of several plant species were used to collect bird droppings and detect fluorescent seeds in those droppings. Fruit abundance and seed dispersal were higher close to the stream, and decreased rapidly with an increase in distance from the stream. From all species, the most dispersed was Smilax aspera and species with smaller seed were found at a significantly larger distance from parents plants than species with large seeds. This can be explained by the fact that smaller seed stay longer in the intestinal tract of the birds. The results of this study present some implications for the colonization of freshly fruit plants from the riparian gallery into the adjacent matrix.

Qualidade do ar interior em lares de idosos e a exposição ocupacional aos poluentes atmosféricos

Os lares de idosos são espaços com características específicas, onde a garantia de condições de trabalho saudáveis é fundamental para o bem-estar dos trabalhadores e dos idosos. O objectivo deste trabalho consistiu em avaliar a exposição ocupacional dos trabalhadores dos lares de idosos aos poluentes do ar interior e em verificar qual a prevalência de sintomas/doenças. A amostragem foi não probabilística quanto ao tipo e por conveniência quanto à técnica. A amostra foi constituída por 8 lares de idosos sedeados no concelho de Tondela e 155 trabalhadores. Foram administrados inquéritos aos trabalhadores e avaliada a qualidade do ar, bem como os níveis de temperatura e humidade relativa. Os dados foram tratados através do software estatístico IBM SPSS versão 21.0. A interpretação dos testes estatísticos foi realizada com base no nível de significância de p=0,05, com intervalo de confiança de 95%. Verificámos que as concentrações médias de dióxido de carbono, compostos orgânicos voláteis e partículas com diâmetro <10, registados em alguns lares de idosos ultrapassaram o limiar de protecção sendo essa concentração, em média, mais elevada nos lares localizados em zonas urbanas. Os sintomas/doenças com maior prevalência foram as dores de cabeça, crise de espirros, tonturas e alergias. Os edifícios apresentavam Síndroma do Edifício Doente (SED) e a maioria dos trabalhadores que indicaram possuir sintomas/doenças trabalhavam em lares de idosos localizados em zonas urbanas e residiam em zonas rurais. Torna-se perceptível que as instituições realizem monitorizações contínuas de QAI de modo a não exporem os trabalhadores e os idosos a situações de risco.

Aproveitamento da fibra do epicarpo do coco babaçu em compósito com matriz epóxi: estudo do efeito do tratamento da fibra

Nowadays the environmental issues are increasingly highlighted since the future of humanity is dependent on the actions taken by man. Major efforts are being expended in pursuit of knowledge and alternatives to promote sustainable development without compromising the environment. In recent years there has been a marked growth in the development of reinforced composite fiber plants, as an alternative for economic and ecological effects, especially in the substitution of synthetic materials such as reinforcement material in composites. In this current study the chemical- physical or (thermophysics )characteristics of the babassu coconut fiber, derived from the epicarp of the fruit (Orbignyda Phalerata), which the main constituents of the fiber: Klason lignin, insoluble, cellulose, holocellulose, hemicellulose and the content of ash and moisture will be determined. A study was conducted about the superficial modification of the fibers of the epicarp babassu coconut under the influence of chemical treatment by alkalinization, in an aqueous solution of NaOH to 2.5% (m/v) and to 5.0% to improve the compatibility matrix / reinforcement composite with epoxy matrix. The results of the changes occurred in staple fibers through the use of the techniques of thermogravimetric analyses (TG) and differential scanning calorimetry (DSC). The results found on thermal analysis on samples of fiber without chemical treatment (alkalinities), and on fiber samples treated by alkalinization show that the proposed chemical treatment increases the thermal stability of the fibers and provides a growth of the surface of area fibers, parameters that enhance adhesion fiber / composite. The findings were evaluated and compared with published results from other vegetable fibers, showing that the use of babassu coconut fibers has technical and economic potential for its use as reinforcement in composites

Sinterização de Ce1-XEuXO2-(X/2) para aplicação como eletrólito sólido em células a combustível de temperaturas intermediárias

Given the environmental concern over global warming that occurs mainly by emission of CO2 from the combustion of petroleum, coal and natural gas research focused on alternative and clean energy generation has been intensified. Among these, the highlight the solid oxide fuel cell intermediate temperature (IT-SOFC). For application as electrolyte of the devices doped based CeO2 with rare earth ions (TR+ 3) have been quite promising because they have good ionic conductivity and operate at relatively low temperatures (500-800 ° C). In this work, studied the Ce1-xEuxO2-δ (x = 0,1, 0,2 and 0,3), solid solutions synthesized by the polymeric precursor method to be used as solid electrolyte. It was also studied the processing steps of these powders (milling, compaction and two step sintering) in order to obtain dense sintered pellets with reduced grain size and homogeneous microstructure. For this, the powders were characterized by thermal analysis, X-ray diffraction, particle size distribution and scanning electrons microscopy, since the sintered samples were characterized by dilatometry, scanning electrons microscopy, density and grain size measurements. By x-ray diffraction, it was verified the formation of the solid solution for all compositions. Crystallites in the nanometric scale were found for both sintering routes but the two step sintering presented significant reduction in the average grain size

Base teórica para o crédito de carbono.

A mais de quinze anos que se fala em crédito de carbono para países subdesenvolvidos reduzirem suas emissões ou para seqüestrarem o gás carbono para os países desenvolvidos que não conseguiram cumprir as metas assumidas no Protocolo de Quioto. A grande espectativa dos brasileiros neste mercado foi frustrada em função das exigências (linha base e adicionalidade) do protocolo, deste modo a maioria dos projetos aprovados por empresas brasileiras são de redução das emissões de GEE pela mudança na matriz energética.

Adição de nanopartículas de Ti em matriz de Fe através da deposição por magnetron sputtering

Microalloyed steels constitute a specific class of steel with low amount of carbon and microalloying elements such as Vanadium (V), Niobium (Nb) and Titanium (Ti). The development and application of microalloyed steels and steels in general are limited to the handling of powders with particles of submicron or nanometer dimensions. Therefore, this work presents an alternative in order to construction of microalloyed steels utilizing the deposition by magnetron sputtering technique as a microalloying element addiction in which Ti nanoparticles are dispersed in an iron matrix. The advantage of that technique in relation to the conventional metallurgical processes is the possibility of uniformly disperse the microalloying elements in the iron matrix. It was carried out deposition of Ti onto Fe powder in high CH4, H2, Ar plasma atmosphere, with two deposition times. After the deposition, the iron powder with nanoparticles of Ti dispersed distributed, were compacted and sintered at 1120 ° C in resistive furnace. Characterization techniques utilized in the samples of powder before and after deposition of Ti were Granulometry, Scanning Electron Microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (DRX). In the case of sintered samples, it was carried out characterization by SEM and Vickers Microhardness assays. The results show which the deposition technique by magnetron sputtering is practicable in the dispersion of particles in iron matrix. The EDX microanalysis detected higher percentages of Ti when the deposition were carried out with the inert gas and when the deposition process was carried out with reactive gas. The presence of titanium in iron matrix was also evidenced by the results of X-ray diffraction peaks that showed shifts in the network matrix. Given these results it can be said that the technique of magnetron sputtering deposition is feasible in the dispersion of nanoparticles of iron matrix in Ti.

Análise do risco de lixiviação de poluentes orgânicos de lodos de esgotos em cultivos de milho.

Por hipótese, o uso de lodos de esgotos como fertilizantes agrícolas pode contaminar solos e águas subterrâneas com poluentes orgânicos. O objetivo desse trabalho foi analisar o risco de lixiviação de trinta e oito poluentes orgânicos de lodos de esgotos. Para tanto, foi assumido um cultivo de milho em um solo Latossolo vermelho distrófico, característico de solos de regiões produtoras de milho, no qual foi aplicada uma dose de lodo de esgotos como fertilizante agrícola. A lixiviação dos poluentes foi simulada utilizando-se o modelo CMLS94 e os dados climáticos de mil anos independentes e igualmente prováveis gerados pelo simulador de clima WGEN, a partir de uma seqüência de quatorze anos consecutivos observados e registrados pela Estação Experimental do Instituto Agronômico de Campinas - IAC. A análise de risco indicou que os poluentes benzidina > n-nitrosodi-n-propilamina > fenol > 2,4-dinitrofenol > isoforano > nitrobenzeno > p-cresol > o-cresol > m-cresol > 2- clorofenol, nessa ordem, devem ser monitorados prioritariamente em águas subterrâneas de regiões de solos similares a Latossolo vermelho distrófico nos quais foram aplicados doses de lodo.

Tratamentos de fibras de carnaúba [copernicia prunífera (miller) h. e. moore] para o desenvolvimento de compósito biodegradável com matriz de polihidroxibutirato

The use of raw materials from renewable sources for production of materials has been the subject of several studies and researches, because of its potential to substitute petrochemical-based materials. The addition of natural fibers to polymers represents an alternative in the partial or total replacement of glass fibers in composites. In this work, carnauba leaf fibers were used in the production of biodegradable composites with polyhydroxybutyrate (PHB) matrix. To improve the interfacial properties fiber / matrix were studied four chemical treatments to the fibers..The effect of the different chemical treatments on the morphological, physical, chemical and mechanical properties of the fibers and composites were investigated by scanning electron microscopy (SEM), infrared spectroscopy, X-ray diffraction, tensile and flexural tests, dynamic mechanical analysis (DMA), thermogravimetry (TGA) and diferential scanning calorimetry (DSC). The results of tensile tests indicated an increase in tensile strength of the composites after the chemical treatment of the fibers, with best results for the hydrogen peroxide treated fibers, even though the tensile strength of fibers was slightly reduced. This suggests a better interaction fiber/matrix which was also observed by SEM fractographs. The glass transition temperature (Tg) was reduced for all composites compared to the pure polymer which can be attributed to the absorption of solvents, moisture and other low molecular weight molecules by the fibers

[Concepto, definición, factores y matriz del empaque].

33 hojas.

Comportamento magnético de compósitos de matriz polimérica com adição de ferritas

Polymer matrix composites offer advantages for many applications due their combination of properties, which includes low density, high specific strength and modulus of elasticity and corrosion resistance. However, the application of non-destructive techniques using magnetic sensors for the evaluation these materials is not possible since the materials are non-magnetizable. Ferrites are materials with excellent magnetic properties, chemical stability and corrosion resistance. Due to these properties, these materials are promising for the development of polymer composites with magnetic properties. In this work, glass fiber / epoxy circular plates were produced with 10 wt% of cobalt or barium ferrite particles. The cobalt ferrite was synthesized by the Pechini method. The commercial barium ferrite was subjected to a milling process to study the effect of particle size on the magnetic properties of the material. The characterization of the ferrites was carried out by x-ray diffraction (XRD), field emission gun scanning electron microscopy (FEG-SEM) and vibrating sample magnetometry (VSM). Circular notches of 1, 5 and 10 mm diameter were introduced in the composite plates using a drill bit for the non-destructive evaluation by the technique of magnetic flux leakage (MFL). The results indicated that the magnetic signals measured in plates with barium ferrite without milling and cobalt ferrite showed good correlation with the presence of notches. The milling process for 12 h and 20 h did not contribute to improve the identification of smaller size notches (1 mm). However, the smaller particle size produced smoother magnetic curves, with fewer discontinuities and improved signal-to-noise ratio. In summary, the results suggest that the proposed approach has great potential for the detection of damage in polymer composites structures

Matriz Input-Output da região Alentejo: Acerca da Distribuição de Rendimento (3º quadrante)

No número 18 do “Boletim Trimestral” apresentámos os principais resultados do estudo que elaborou a Matriz Input-Output da Região Alentejo (MIO-Alentejo). Com este texto prosseguimos o propósito de divulgação dos resultados e conclusões do projeto, mas adotando agora uma perspectiva mais focalizada. Em particular, interessa-nos de momento olhar para o processo de formação do valor acrescentado, ou, de forma equivalente, para a distribuição do rendimento gerado na produção, sob a forma de remuneração dos diferentes fatores produtivos (3º quadrante). Nos pontos 2, 3, e 4 apresentamos os resultados e, em conclusão, deixamos algumas considerações finais no ponto 5. Anexamos um glossário com uma breve descrição metodológica.

Comportamento da adição do carbeto de nióbio (nBC) na matriz metálica do aço ferrítico 15kH2mfa

The 15Kh2MFA steel is a kind of Cr-Mo-V family steels and can be used in turbines for energy generation, pressure vessels, nuclear reactors or applications where the range of temperature that the material works is between 250 to 450°C. To improve the properties of these steels increasing the service temperature and the thermal stability is add a second particle phase. These particles can be oxides, carbides, nitrites or even solid solution of some chemical elements. On this way, this work aim to study the effect of addition of 3wt% of niobium carbide in the metallic matrix of 15Kh2MFA steel. Powder metallurgy was the route employed to produce this metallic matrix composite. Two different milling conditions were performed. Condition 1: milling of pure 15Kh2MFA steel and condition 2: milling of 15Kh2MFA steel with addition of niobium carbide. A high energy milling was carried out during 5 hours. Then, these two powders were sintered in a vacuum furnace (10-4torr) at 1150 and 1250°C during 60 minutes. After sintering the samples were normalized at 950°C per 3 minutes followed by air cooling to obtain a desired microstructure. Results show that the addition of niobium carbide helps to mill faster the particles during the milling when compared with that steel without carbide. At the sintering, the niobium carbide helps to sinter increasing the density of the samples reaching a maximum density of 7.86g/cm³, better than the melted steel as received that was 7,81g/cm³. In spite this good densification, after normalizing, the niobium carbide don t contributed to increase the microhardness. The best microhardness obtained to the steel with niobium carbide was 156HV and to pure 15Kh2MFA steel was 212HV. It happened due when the niobium carbide is added to the steel a pearlitic structure was formed, and the steel without niobium carbide submitted to the same conditions reached a bainitic structure

Reguladores da expressão do gene da proteía Gla da matriz (MGP) numa linha celular derivada de peixe

Dissertação de mest. em Biotecnologia, Faculdade de Engenharia de Recursos Naturais, Univ. do Algarve, 2004