Causes and consequences of low rates of specialisation in science and technology in CDCC member countries

The importance of science and technology (S&T) in Small Island Developing States (SIDS) is clearly articulated in Chapter XI, paragraphs 57, 58, 61 and 62 of the Mauritius Strategy for the Further Implementation of the Programme of Action for Sustainable Development of Small Island Developing States (MSI). At the regional level, the Heads of Government of the Caribbean Community (CARICOM) noted the challenge that CARICOM member States face in competing in this new international economic environment in which the impact of scientific and technological change has created a knowledge-based global economy. Given the importance of S&T to development of Caribbean SIDS, the Economic Commission for Latin America and the Caribbean (ECLAC) Subregional Headquarters for the Caribbean embarked on a study to determine the causes and consequences of low rates of specialisation in S&T with a view to making recommendations for development of strategies for addressing these challenges. Data on postgraduate (Master of Science, Master of Philosophy and Doctor of Philosophy) enrolment and graduation in agriculture, engineering and the sciences from the three campuses of the University of the West Indies (UWI) as well as from the University of Technology in Jamaica and the University of Trinidad and Tobago (UTT) were examined and analysed. Face-to-face interviews were also held with key personnel from these institutions and a questionnaire was also served to individuals in key institutions. Results of the study revealed that although the number of students enrolled in higher degree programmes has increased in absolute terms, they are decreasing in relative terms. However, enrolment in agriculture has indeed declined while enrolment rates in engineering, although increasing, were not significantly high. Market forces have proved to be a main reason for this trend while facilities for the conduct and supervision of cutting-edge research, the disconnect between science and industry and societal labelling of scientists as “misfits” are also contributing to the situation. This has resulted in a reduced desire by students at all levels of the school system and faculty to be involved in S&T; lack of innovation; a better staffed private, as compared with public, sector; and poor remuneration in science-based employment. There also appears to be a gender bias in enrolment with more males than females being enrolled in engineering while the opposite is apparent in agriculture and the sciences. Recommendations for remedying this situation range from increasing investment in S&T, creating linkages between science and industry as well as with the international community, raising awareness of the value of S&T at all levels of the education system to informing policy to stimulate the science – innovation interface so as to promote intellectual property rights.

The Digital Divide in the University: The Appropriation of ICT in Higher Education Students from Bogota, Colombia

The growth and integration of ICTs in the global economy have created conditions that profoundly affect our society, dividing communities between those who effectively appropriate these resources and those who do not, what is called the digital divide. This exploratory study seeks to propose and validate ways of assessing this phenomenon in higher education, from the construction of a model and a comprehensive methodology that value contextual conditions, in addition to measuring access factors and motivation for use, that have been employed in previous research. To obtain indications about the behavior of this phenomenon, we developed research with students from three universities in Bogota, administering 566 surveys in four phases that would test the variables proposed in the model. The results show that the variables of the model link causally, with the strongest relations between education, attitude towards ICTs and ICT application. Although students have good access to ICTs and high levels of education, no strong relationship was found in regards to perceived impact on production. This may be explained by a superficial appropriation of ICT, due to a context that is alien to its conditions of origin (industrialism, innovation), poor quality of education and economies not centered around R&D.

Media Education and Brazilian Educational Policies for the Enhancement of Learning

As media education concepts and practices have been disseminated and strengthened in European countries and Americas, the policies responsible for that expansion remain little known, particularly in countries where the achievements have been recently noted. That is the case for Brazil, where there have been new opportunities for media education, considered as a valuable resource to help accomplish goals of the educational system. This paper looks into the contribution of media education to the enhancement of teaching and learning in the context of innovations brought by recent policies of the Brazilian Ministry of Education. After educational reform programmes which brought the opportunity for emerging fields such as media education, we produced teaching material and conducted a series of workshops with students and teachers from state secondary schools. By reading and producing multimedia information about local public services available to young people, pupils learned about democracy, citizenship, civic engagement, media language, and identity. Lessons from our experiment are discussed against the backdrop of education policies being implemented to ameliorate harsh conditions resulting from the recent economic crisis. We suggest that media education can help by creating a learning environment in which the students become aware of the value of educational attainments.

Trends in Brazilian academic production in the History of Mathematics Education: directions from EBRAPEM

The number of papers on History of Mathematics Education presented at EBRAPEM (Brazilian Meeting of Graduate Students in Mathematics Education) has increased significantly between 2003 and 2008. This article presents a study with the aim of identifying themes, periods in focus, and sources and theoretical and methodological references used by the authors of the papers on History of Mathematics Education published in the proceedings of VII, VIII, IX, X, XI and XII EBRAPEM. The study indicates that the approach of ongoing research in History of Mathematics Education in Brazil has been similar to the approach of research in History of Education in general. However, the institutional separation between these two areas of investigation is noted as a factor rendering communication between both groups of researchers difficult.

The perspective of the teaching of arts projected by H. Gardner and the National Syllabus Parameters - (arts) of elementary school

In a concise way, the article reports part of the Master of Arts dissertation in Music entitled The meaning of the teaching of Arts in H. Gardner's perspective, presented in the IAUNESP [Arts Institute-State of Sao Paulo University] in 2008. Some considerations on the Statutory Law n. 11.769/08 were added to the original text. The produced research had an exploratory nature and a theoretical mark. Some texts by Howard Gardner, by the psychologist Eliane Leao, as well as the text of the National Syllabus Parameters-Art, from the Department of Elementary Education, served as a foundation for this article. The intended aim was to demonstrate to what extent the pedagogical proposition of the Arts Education projected by H. Gardner is similar to the one proposed by the National Syllabus Parameters, and which would the benefits be in this age group of an artistic sensitizing work for the development of the individual's personality.

In search of the autonomous and critical individual: a philosophical and pedagogical analysis of the physical education curriculum of São Paulo (Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

School inclusion: analyzing the establishment and organization of a special needs education service in a brazilian municipality

The present research integrates a network of studies called National Monitoring Center for Special Education (NMCSE) which studies the Multi-purpose Feature Rooms (MFRs) in regular schools. We aim to investigate whether the service offered by such rooms, maintained by the Department of Education of the Municipality of Araraquara, in São Paulo State, Brazil, is being successful at supporting the education of children and youth with special needs, pervasive developmental disorders and high skilled/gifted individuals. We have also investigated the limits and possibilities of such rooms concerning the set of services offered to their participants. In order to conduct the present research, we have performed: an interview with the Special Education Program manager from the abovementioned Department of Education; and the analysis of a Training Program that MFRs teachers must take. The training program consists of ten morning and afternoon shift meetings. The analyzed data leads us to conclude that the policy of implementation of MFRs, even in this relatively restricted universe is seen from different perspectives. Some interpretations are still permeated by the clinical model, considering individual action. The challenges observed in the classrooms show that the cooperation among teachers still occur randomly and, among other difficulties raised by them, is the selection of the right placement methods to identify eligible students who will benefit from the Specialized Educational Service (SES). In addition, teaching evaluation was considered fragile, as well as the training and the general requirements demanded in order to achieve the expected results.

Student and Faculty Perceptions of Technology’s Usefulness in Community College General Education Courses

Educational institutions of all levels invest large amounts of time and resources into instructional technology, with the goal of enhancing the educational effectiveness of the learning environment. The decisions made by instructors and institutions regarding the implementation of technology are guided by perceptions of usefulness held by those who are in control. The primary objective of this mixed methods study was to examine the student and faculty perceptions of technology being used in general education courses at a community college. This study builds upon and challenges the assertions of writers such as Prensky (2001a, 2001b) and Tapscott (1998) who claim that a vast difference in technology perception exists between generational groups, resulting in a diminished usefulness of technology in instruction. In this study, data were gathered through student surveys and interviews, and through faculty surveys and interviews. Analysis of the data used Kendall’s Tau test for correlation between various student and faculty variables in various groupings, and also typological analysis of the transcribed interview data. The analysis of the quantitative data revealed no relationship between age and perception of technology’s usefulness. A positive relationship was found to exist between the perception of the frequency of technology use and the perception of technology’s effectiveness, suggesting that both faculty members and students believed that the more technology is used, the more useful it is in instruction. The analysis of the qualitative data revealed that both faculty and students perceive technology to be useful, and that the most significant barriers to technology’s usefulness include faulty hardware and software systems,lack of user support, and lack of training for faculty. The results of the study suggest that the differences in perception of technology between generations that are proposed by Prensky may not exist when comparing adults from the younger generation with adults from the older generation. Further, the study suggests that institutions continue to invest in instructional technology, with a focus on high levels of support and training for faculty, and more universal availability of specific technologies, including web access, in class video, and presentation software. Adviser: Ronald Joekel

Deformation of Implant Abutments After Framework Connection Using Strain Gauges

When a cylinder is connected to an abutment it is expected that abutment and cylinder will be subjected to compression forces throughout their periphery because of the clamping force exerted by the screw. The deformation resultant of this compression should be measurable and uniform along the periphery of the abutment. Considering that multiple retainers connected to each other can affect the fit of a framework, as well as the use of different alloys, it is expected that the abutments will present different levels of deformation as a result of framework connection. The aim of this study was to evaluate the deformation of implant abutments after frameworks, cast either in cobalt-chromium (CoCr) or silver-palladium (AgPd) alloys, were connected. Samples (n = 5) simulating a typical mandibular cantilevered implant-supported prosthesis framework were fabricated in cobalt-chromium and silver-palladium alloys and screwed onto standard abutments positioned on a master-cast containing 5 implant replicas. Two linear strain gauges were fixed on the mesial and distal aspects of each abutment to capture deformation as the retention screws were tightened. A combination of compressive and tensile forces was observed on the abutments for both CoCr and AgPd frameworks. There was no evidence of significant differences in median abutment deformation levels for 9 of the 10 abutment aspects. Visually well-fit frameworks do not necessarily transmit load uniformly to abutments. The use of CoCr alloy for implant-supported prostheses frameworks may be as clinically acceptable as AgPd alloy.

Introducing education for sustainable development in the undergraduate laboratory: quantitative analysis of bioethanol fuel and its blends with gasoline by using solvatochromic dyes

The concept of Education for Sustainable Development, ESD, has been introduced in a period where chemistry education is undergoing a major change, both in emphasis and methods of teaching. Studying an everyday problem, with an important socio-economic impact in the laboratory is a part of this approach. Presently, the students in many countries go to school in vehicles that run, at least partially, on biofuels; it is high time to let them test these fuels. The use of renewable fuels is not new: since 1931 the gasoline sold in Brazil contains 20 to 25 vol-% of bioethanol; this composition is being continually monitored. With ESD in mind, we have employed a constructivist approach in an undergraduate course, where UV-vis spectroscopy has been employed for the determination of the composition of two fuel blends, namely, bioethanol/water, and bioethanol/gasoline. The activities started by giving a three-part quiz. The first and second ones introduced the students to historical and practical aspects of the theme (biofuels). In the third part, we asked them to develop a UV-vis experiment for the determination of the composition of fuel blends. They have tested two approaches: (i) use of a solvatochromic dye, followed by determination of fuel composition from plots of the empirical fuel polarity versus its composition; (ii) use of an ethanol-soluble dye, followed by determination of the blend composition from a Beer's law plot; the former proved to be much more convenient. Their evaluation of the experiment was highly positive, because of the relevance of the problem; the (constructivist) approach employed, and the bright colors that the solvatochromic dye acquire in these fuel blends. Thus ESD can be fruitfully employed in order to motivate the students; make the laboratory "fun", and teach them theory (solvation). The experiments reported here can also be given to undergraduate students whose major is not chemistry (engineering, pharmacy, biology, etc.). They are low-cost and safe to be introduced at high-school level.

Isolated Islands? Memory of the Holocaust in Formal and Non-Formal Education. The Case Study of Post-Communist Poland

Existing studies revealed several conflicts around the memory of the Holocaust in Poland: between understanding the need to teach about the Holocaust and indifference toward anti-Jewish graffiti; a conflict around the perception of Polish help to Jews; and the competing images of Polish and Jewish suffering during World War II. Those conflicts will be addressed in the paper as reflecting educational gaps in the Polish education system (lack of bad memory). This paper will look at the consciousness of young Poles, in terms of attitudes toward Jews, the Holocaust and memory of the Holocaust. The data presented are the preliminary results of the author’s longitudinal study „Attitudes of Young Poles toward the Jews and the Holocaust”. Quantitative and qualitative studies include field studies and participant observation of educational projects in Tykocin, Treblinka, Warsaw, Lublin, Bodzentyn and Kielce. The paper will present some components of the development of education about the Holocaust in Poland. There is a need to evaluate the attempt to bring back the memory of Jewish neighbours in some of the states of Central and Eastern Europe, a process with an ongoing effort to renovate monuments, destroyed cemeteries and synagogues. The number and scope of such initiatives in Poland indicate that civic institutions and individuals are intensifying their efforts to teach their fellow citizens about the Holocaust, however their impact should be assessed in detail.

Improving sixth grade student knowledge of ecology using fish rearing and release as a real-world context

This research project measured the effects of real-world content in a science classroom by determining change (deep knowledge of life science content, including ecosystems from MDE – Grade Level Content Expectations) in a subset of students (6th Grade Science) that may result from the addition of curriculum (real-world content of rearing trout in the classroom). Data showed large gains from the pre-test to post-test in students from both the experimental and control groups. The ecology unit with the implementation of real-world content [trout] was even more successful, and improved students’ deep knowledge of ecosystem content from Michigan’s Department of Education Grade Level Content Expectations. The gains by the experimental group on the constructed response section of the test, which included higher cognitive level items, were significant. Clinical interviews after the post-test confirmed increases in deep knowledge of ecosystem concepts in the experimental group, by revealing that a sample of experimental group students had a better grasp of important ecology concepts as compared to a sample of control group students.

Looking at the effectiveness of an earth science unit designed using the Understanding by Design process

This report shares my efforts in developing a solid unit of instruction that has a clear focus on student outcomes. I have been a teacher for 20 years and have been writing and revising curricula for much of that time. However, most has been developed without the benefit of current research on how students learn and did not focus on what and how students are learning. My journey as a teacher has involved a lot of trial and error. My traditional method of teaching is to look at the benchmarks (now content expectations) to see what needs to be covered. My unit consists of having students read the appropriate sections in the textbook, complete work sheets, watch a video, and take some notes. I try to include at least one hands-on activity, one or more quizzes, and the traditional end-of-unit test consisting mostly of multiple choice questions I find in the textbook. I try to be engaging, make the lessons fun, and hope that at the end of the unit my students get whatever concepts I‘ve presented so that we can move on to the next topic. I want to increase students‘ understanding of science concepts and their ability to connect understanding to the real-world. However, sometimes I feel that my lessons are missing something. For a long time I have wanted to develop a unit of instruction that I know is an effective tool for the teaching and learning of science. In this report, I describe my efforts to reform my curricula using the “Understanding by Design” process. I want to see if this style of curriculum design will help me be a more effective teacher and if it will lead to an increase in student learning. My hypothesis is that this new (for me) approach to teaching will lead to increased understanding of science concepts among students because it is based on purposefully thinking about learning targets based on “big ideas” in science. For my reformed curricula I incorporate lessons from several outstanding programs I‘ve been involved with including EpiCenter (Purdue University), Incorporated Research Institutions for Seismology (IRIS), the Master of Science Program in Applied Science Education at Michigan Technological University, and the Michigan Association for Computer Users in Learning (MACUL). In this report, I present the methodology on how I developed a new unit of instruction based on the Understanding by Design process. I present several lessons and learning plans I‘ve developed for the unit that follow the 5E Learning Cycle as appendices at the end of this report. I also include the results of pilot testing of one of lessons. Although the lesson I pilot-tested was not as successful in increasing student learning outcomes as I had anticipated, the development process I followed was helpful in that it required me to focus on important concepts. Conducting the pilot test was also helpful to me because it led me to identify ways in which I could improve upon the lesson in the future.

UNDERSTANDING PEOPLE'S ADOPTION OF INDIVIDUAL-USE RENEWABLE ENERGY TECHNOLOGY

This thesis attempts to understand why people adopt or reject individual-use renewable energy technologies (IURET). I used factors from Everett Rogers' Diffusion of Innovation Theory to understand how people's perceptions towards the characteristics of a given IURET (such as price, compatibility, complexity, etc.), the characteristics of the individual adopter (such as innovativeness and environmental awareness), and the communication network (inter-personal communications and mass media) can influence adoption. An online questionnaire was sent to 101randomly selected Michigan households (using random digit dialing) to ask people whether or not they had adopted at least one IURET and to assess the above-mentioned factors from Rogers' theory. Data analysis was then conducted in SPSS using Chi-squared and binary logistic regression to determine the relationship between adoption behaviors (the dependent variable) and the factors from Rogers' theory (the independent variables) while controlling for education. The results show that Rogers' factors of price and observability and the control variable of education were all significant in explaining adoption but the other factors of Rogers' theory were not. For example, if individuals perceive the price of IURET to be reasonable or if they observe their neighbors using these technologies, then they are more likely to adopt. These results indicate that, if we want to promote greater adoption of IURET, we should focus our efforts on making the price of IURET more affordable through incentives and other mechanisms. Adopters should also be given some form of reward if they provide free demonstrations of their IURET in use to their neighbors to take advantage of the observability effects.