Selected trace metal concentration in bottom water and sediments of Kyoga basin lakes, and its potential to aquatic pollution

Although other research studies on areas such as the physical-chemical, nutrients and phytoplankton status of Lake Kyoga systems have been given a lot of attention (e.g. Mungoma 1988 and NaFIRRI 2006), efforts to determine the pollution status of this system, especially by heavy metals as one of the worldwide emerging environmental problems, is still limited. Many trace metals are regarded as serious pollutants of aquatic ecosystems because of their persistence, toxicity and ability to be incorporated into food chains (Mwamburi J., and Nathan O.F., 1997). Given the rapid human population growth and the associated economic activities both within the rural and urban areas in Uganda, such fish production systems are becoming very prone to various kinds of pollution including that by heavy metals. Anthropogenic factors such deforestation, use of chemicals and dumping of metallic products, spillages of fuels from outboard engines and many others and or natural processes involving atmospheric deposition by wind or rain, surface run-offs and streams flows from the catchment introduces heavy metals into the lake environment,.

The use of object oriented modelling and simulation tools in constraint satisfaction for embodiment design

The software package Dymola, which implements the new, vendor-independent standard modelling language Modelica, exemplifies the emerging generation of object-oriented modelling and simulation tools. This paper shows how, in addition to its simulation capabilities, it may be used as an embodiment design tool, to size automatically a design assembled from a library of generic parametric components. The example used is a miniature model aircraft diesel engine. To this end, the component classes contain extra algebraic equations calculating the overload factor (or its reciprocal, the safety factor) for all the different modes of failure, such as buckling or tensile yield. Thus the simulation results contain the maximum overload or minimum safety factor for each failure mode along with the critical instant and the device state at which it occurs. The Dymola "Initial Conditions Calculation" function, controlled by a simple software script, may then be used to perform automatic component sizing. Each component is minimised in mass, subject to a chosen safety factor against failure, over a given operating cycle. Whilst the example is in the realm of mechanical design, it must be emphasised that the approach is equally applicable to the electrical or mechatronic domains, indeed to any design problem requiring numerical constraint satisfaction.

Assessment of cattle genetic introgression into domestic yak populations using mitochondrial and microsatellite DNA markers

Hybridization between yak Poephagus grunniens and taurine Bos taurus or indicine B. indicus cattle has been widely practiced throughout the yak geographical range, and gene flow is expected to have occurred between these species. To assess the impact of cattle admixture on domestic yak, we examined 1076 domestic yak from 29 populations collected in China, Bhutan, Nepal, India, Pakistan, Kyrgyzstan, Mongolia and Russia using mitochondrial DNA and 17 autosomal microsatellite loci. A cattle diagnostic marker-based analysis reveals cattle-specific mtDNA and/or autosomal microsatellite allele introgression in 127 yak individuals from 22 populations. The mean level of cattle admixture across the populations, calculated using allelic information at 17 autosomal microsatellite loci, remains relatively low (mY(cattle) = 2.66 +/- 0.53% and Q(cattle) = 0.69 +/- 2.58%), although it varies a lot across populations as well as among individuals within population. Although the level of cattle admixture shows a clear geographical structure, with higher levels of admixture in the Qinghai-Tibetan Plateau and Mongolian and Russian regions, and lower levels in the Himalayan and Pamir Plateau region, our results indicate that the level of cattle admixture is not significantly correlated with the altitude across geographical regions as well as within geographical region. Although yak-cattle hybridization is primarily driven to produce F-1 hybrids, our results show that the subsequent gene flow between yak and cattle took place and has affected contemporary genetic make-up of domestic yak. To protect yak genetic integrity, hybridization between yak and cattle should be tightly controlled.

Architectural research and its enemies

Like the Research Assessment Exercise (RAE) that preceded it, the UK government's proposed Research Excellence Framework (REF) is a means of allocating funding in higher education to support research. As with any method for the competitive allocation of funds it creates winners and losers and inevitably generates a lot of emotion among those rewarded or penalised. More specifically, the 'winners' tend to approve of the method of allocation and the 'losers' denigrate it as biased against their activities and generally unfair. An extraordinary press campaign has been consistently waged against research assessment and its methods by those involved in architectural education, which I will track over a decade and a half. What follows will question whether this campaign demonstrates the sophistication and superior judgment of those who have gone into print, or conversely whether its mixture of misinformation and disinformation reveals not just disenchantment and prejudice, but a naivety and a depth of ignorance about the fundamentals of research that is deeply damaging to the credibility of architecture as a research-based discipline. With the recent consultation process towards a new cycle of research assessment, the REF, getting under way, I aim to draw attention to the risk of repeating past mistakes. Copyright © Cambridge University Press 2010.

Sequential analysis for testing quality standard of fish ham and sausage

Fish sausages are finely ground fish flesh, either of a single species or mixed, homogenised with starch, sugar, fat, spices and preservatives, generally filled in cylindrical synthetic or natural casings and pasteurised. Similar products containing small pieces of quality fish and lard are termed "fish ham". They are highly relished products in Japan, annual consumption exceeding 2 lakh tones. Preliminary studies have shown that they can catch a lucrative market in our country. However, being a pasteurised product which is often consumed as such without any further cooking, strict quality control measures have to be enforced so as to avoid food poisoning hazards. Besides physical characteristics like absence of damages, pin-holes, curliness and air pockets as well as jelly strength, texture and flavour, chemical characteristics like pH and acid values, moisture, carbohydrate and fat contents and volatile bases have to be assessed. A very important test that has to be carried out along with the above, before passing a lot for free distribution is the bacteriological examination to avoid the presence of pathogenic organisms.

Preservation of Sardinella longiceps in iced and chilled seawater. Part 1 - Changes during storage with particular reference to bacterial load and nitrogenous compounds

Oil sardines in prime condition were subjected to onboard chilling. Two lots were chilled in CSW (samples C and CI), a third lot was chilled in crushed ice (sample I) and a fourth lot left not iced on deck (Sample AI). Upon landing sample AI was iced and sample CI was removed from the CSW and iced. All the four samples were kept in a chilled room for storage studies. The fish chilled and stored in CSW recorded the least, and the fish subjected to delayed icing, the highest values for all the indices of spoilage namely, free amino nitrogen, trimethylamine (TMA) and total volatile base nitrogen (TVBN). The total psychrophilic bacterial number also showed a similar trend. The organoleptic assessment of the cooked samples revealed C I, CI, AI to be the order of preference throughout the storage. This assessment was found to hold good for the rest of the parameters as well. The CSW held fishes were found to be distinctly superior to the iced ones for the first five days of storage. Such a marked prevalence in quality for five days would suffice for the fish to fetch a premium in the market over other landings of the same fish whether chilled or not chilled. Chilling on board in CSW and icing the same after landings, did not show encouraging results.

Preservation of Indian oil sardine (Sardinella longiceps) in iced and chilled seawater. Part 2 - Changes during storage with particular reference to salt penetration and lipid deterioration during CSW holding

Oil sardines in prime condition were chilled on board. Two lots were chilled in CSW (samples C & CI), one lot ice (sample I) and a fourth lot was left un-iced on deck (sample AI). Sample AI was iced after landing and sample CI was taken out of the chilled seawater and. iced. All the four samples were kept in a chilled room for storage studies. Sample C, chilled and stored in CSW, recorded a gradual gain in weight and an increase in salt content of the muscle. Presence of salt did not seem to cause any excessive protein denaturation. Salt extractability decreased at a gradual rate in all cases. Presence of salt seemed to wield no noticeable influence on lipid hydrolysis and subsequent peroxidation. Results of chemical and sensory evaluations highlight this. Holding sardines in CSW gave a product of excellent quality for the first four to five days of storage. Beyond the fifth day of storage quality deteriorated rapidly and there was no noticeable superiority for this sample (sample C) over the on board iced fish. This was evident in the sensory evaluation as well. However, a storage life of five days in a readily acceptable state is sufficient for the fish to be disposed in the market at a premium sale price over other landings of the same species.

The zooplankton population structure and their trend of variations in the southern of Caspian Sea (Iranian waters)

Caspian Sea has gone under a lot of changes due to human influences and the unwanted presence of a ctenophora Menomiopsis leidyi which has greatly changed the structure of planktons in the last recent years. Therefore, this study was carried out in order to determine these changes in the zooplankton community. the Sampling was done in 8 transacts in Astara, Anzali, Sefidrood, Tonekaboun, Noushahr, Babolsar, Amirabad and Bandar Torkaman coastal waters at 5 different depths including 5, 10, 20, 50 and 100 m. Sampling was carried out in four seasons of spring, summer, autumn and winter during 2008, 2009 and 2010 on board of R/V Gilan. Altogether, 12 species of zooplankton were identified in 2008, 22 species in 2009 and 14 species in 2010. The zooplankton included four groups: copepoda (4 species), cladocera (8species), rotatoria (10 species) and protozoa (2 species).The increase of diversity in 2009 was due to cladocera and rotatoria groups. The abundance of zooplankton in the spring was 5074 + 7807 ind/m3 more than other season in 2008. The abundance of copepoda in the summer reached the highest value of 3332 ind/m3 and since autumn the abundance gradually decreases and in the winter reached to the lowest value. The most abundance of cladocera was 797 ind/m3 in winter and decreased in summer and autumn. The abundance of rotatoria was 2189 ind/m3 in winter. rotifera and copepoda consisted the main population of Zooplanktons in the winter. The results of 2009 and 2010 showed that the abundance of zooplankton in winter was 2.6 fold of autumn, 1.6 fold of summer and 1.1 fold (1/9 fold in 2010)of spring. After increasing increased of temperature, phytoplankton, and zooplankton in summer, M.leidyi increased too. In the autumn M. leidyi reached to the highest rate and decreased zooplankton. The maximum population of zooplankton was in the layer 0-20 m and in the layer more than 20 meters, the abundance of zooplankton decreased very much. In 216 2008, 2009 and 2010, the abundance of zooplankton was 87, 77 and 77 percent in the layer 0-20 m respectively. In this study, the thermocline was observed in the layer 10 – 20 meters in the spring, that formed a thin layer but in the summer it was in the layer 20 to 50 meters. Temperature decreased between 11 to 15 oC in this layer. The variation of temperature between surfaces to bottom was 10 to 13 oC in spring, 19 to 21 in summer, about 9 oC in autumn and maximum 3 oC in winter. The most biomass of zooplankton was in the west. The biomass of zooplankton in central west and east of Southern of Caspian Sea was 54 %, 22 % and 24 % respectively in 2008, in 2009 was 48%, 33% and 20% respectively and in 2010 was 54 %, 29 % and 16 % respectively .The biomass decreased from west to east. The model of zooplankton designed by principal component analysis (PCA)and linear regression for Southern of Caspian Sea.

Identification and distribution of cartilaginous fishes of the Persian Gulf (Bushehr Province waters)

Class Condrichthyes consist of two sub-classes: Holocehali and. Elasmobranchii, the second one are more divers and has more importance. Selachimorpha (sharkes) and Batidoidimorpha (rays and skates) are two super-order of Elasmobranchii, which they have crucial role in ecological balance in marine ecosystmes. Except few cases, most of sharks and rays (rays and skates) are not well identified, so a lot of works need to be done in this regards. The area of study is located between 49°, 35' and 52°, 33' E and between 27°, 21' and 30°, 02' N in depth of 7 to 78 in. Study were conducted diuring August 1998, September 1999. Samples were taken during 3 sea cruises from 70 bottom trawl net. All sharks and batoid fishes were identified based on biometric specifications (weight, total, length and sexuality for both group and extra biometric specifications, disc width, disc length, and tail length only for, batoid fishes). The 1140 specimens of batoid fishes identified belonged to 6 families, and 18 species. 3 new species were identified, they are Himantura sp.1 and Himantura sp.2 belonged to Dasyatidae family and Rhinobatos sp. belonged to Rhinobatidae Familiy. It needs more works and more adaquate ducuments for cl.earfing scientific names of these species. The 275 specimens of sharks identified belonged to 6 families and 10 species. Chiloscyllium sp. belonged to Hemiscylliidae, family as a new species was identified.

Solving problems in production scheduling

Traditionally, production scheduling has been viewed as a problem-solving task that involves a single problem - generation of a suitable schedule. This paper presents an alternative model in which individual difficulties are viewed as problems, and the task is to maintain a suitable schedule by resolving as many of these problems as possible. Decision support software is described that has facilities for defining policies to handle numerous minor problems and complete problem-solving strategies to deal with major problems. The paper then discusses the potential for this style of decision support to improve the performance of human schedulers. © 1995.

Product scheduling for thermal energy reduction in papermaking industries

Papermaking is considered as an energy-intensive industry partly due to the fact that the machinery and procedures have been designed at the time when energy was both cheap and plentiful. A typical paper machine manufactures a variety of different products (grades) which impose variable per-unit raw material and energy costs to the mill. It is known that during a grade change operation the products are not market-worthy. Therefore, two different production regimes, i.e. steady state and grade transition can be recognised in papermaking practice. Among the costs associated with paper manufacture, the energy cost is 'more variable' due to (usually) day-to-day variations of the energy prices. Moreover, the production of a grade is often constrained by customer delivery time requirements. Given the above constraints and production modes, the product scheduling technique proposed in this paper aims at optimising the sequence of orders in a single machine so that the cost of production (mainly determined by the energy) is minimised. Simulation results obtained from a commercial board machine in the UK confirm the effectiveness of the proposed method. © 2011 IFAC.

Flaw sizing in pipes using long-range guided wave testing

The absence of adequate inspection data from difficult-to-access areas on pipelines, such as cased-road crossings, makes determination of fitness for continued service and compliance with increasingly stringent regulatory requirements problematic. Screening for corrosion using long-range guided wave testing is a relatively new inspection technique. The complexity of the possible modes of vibration means the technique can be difficult to implement effectively but this also means that it has great potential for both detecting and characterizing flaws. The ability to determine flaw size would enable the direct application of standard procedures for determining fitness-for-service, such as ASME B31G, RSTRENG, or equivalent for tens of metres of pipeline from a single inspection location. This paper presents a new technique for flaw sizing using guided wave inspection data. The technique has been developed using finite element models and experimentally validated on 6'' Schedule 40 steel pipe. Some basic fitness-for-service assessments have been carried out using the measured values and the maximum allowable operating pressure was accurately determined. © 2011 American Institute of Physics.

Sensor data scheduling for linear quadratic Gaussian control with full state feedback

Networked control systems (NCSs) have attracted much attention in the past decade due to their many advantages and growing number of applications. Different than classic control systems, resources in NCSs, such as network bandwidth and communication energy, are often limited, which degrade the closed-loop system performance and may even cause the system to become unstable. Seeking a desired trade-off between the closed-loop system performance and the limited resources is thus one heated area of research. In this paper, we analyze the trade-off between the sensor-to-controller communication rate and the closed-loop system performance indexed by the conventional LQG control cost. We present and compare several sensor data schedules, and demonstrate that two event-based sensor data schedules provide better trade-off than an optimal offline schedule. Simulation examples are provided to illustrate the theories developed in the paper. © 2012 AACC American Automatic Control Council).

Risk based lifetime costs assessment of a ground source heat pump (GSHP) system design: Methodology and case study

Space heating accounts for a large portion of the world's carbon dioxide emissions. Ground Source Heat Pumps (GSHPs) are a technology which can reduce carbon emissions from heating and cooling. GSHP system performance is however highly sensitive to deviation from design values of the actual annual energy extraction/rejection rates from/to the ground. In order to prevent failure and/or performance deterioration of GSHP systems it is possible to incorporate a safety factor in the design of the GSHP by over-sizing the ground heat exchanger (GHE). A methodology to evaluate the financial risk involved in over-sizing the GHE is proposed is this paper. A probability based approach is used to evaluate the economic feasibility of a hypothetical full-size GSHP system as compared to four alternative Heating Ventilation and Air Conditioning (HVAC) system configurations. The model of the GSHP system is developed in the TRNSYS energy simulation platform and calibrated with data from an actual hybrid GSHP system installed in the Department of Earth Science, University of Oxford, UK. Results of the analysis show that potential savings from a full-size GSHP system largely depend on projected HVAC system efficiencies and gas and electricity prices. Results of the risk analysis also suggest that a full-size GSHP with auxiliary back up is potentially the most economical system configuration. © 2012 Elsevier Ltd.