Integrated Optimal Power Flow for Distribution Networks in Local and Urban Scales

This paper develops an integrated optimal power flow (OPF) tool for distribution networks in two spatial scales. In the local scale, the distribution network, the natural gas network, and the heat system are coordinated as a microgrid. In the urban scale, the impact of natural gas network is considered as constraints for the distribution network operation. The proposed approach incorporates unbalance three-phase electrical systems, natural gas systems, and combined cooling, heating, and power systems. The interactions among the above three energy systems are described by energy hub model combined with components capacity constraints. In order to efficiently accommodate the nonlinear constraint optimization problem, particle swarm optimization algorithm is employed to set the control variables in the OPF problem. Numerical studies indicate that by using the OPF method, the distribution network can be economically operated. Also, the tie-line power can be effectively managed.

Management of public water supply to reduce energy cost and improve wind power uptake

This paper presents a study on the implementation of Real-Time Pricing (RTP) based Demand Side Management (DSM) of water pumping at a clean water pumping station in Northern Ireland, with the intention of minimising electricity costs and maximising the usage of electricity from wind generation. A Genetic Algorithm (GA) was used to create pumping schedules based on system constraints and electricity tariff scenarios. Implementation of this method would allow the water network operator to make significant savings on electricity costs while also helping to mitigate the variability of wind generation.

Management of public water supply to reduce energy cost and improve wind power uptake

This paper presents a study on the implementation of Real-Time Pricing (RTP) based Demand Side Management (DSM) of water pumping at a clean water pumping station in Northern Ireland, with the intention of minimising electricity costs and maximising the usage of electricity from wind generation. A Genetic Algorithm (GA) was used to create pumping schedules based on system constraints and electricity tariff scenarios. Implementation of this method would allow the water network operator to make significant savings on electricity costs while also helping to mitigate the variability of wind generation.

The role of nuclear physics in supernovae and the evolution of neutron stars, Neutrino Opacities, Equation of State, Transport Coefficients, and Dark Matter Production

Thesis (Ph.D.)--University of Washington, 2016-08

Power control in cognitive radios, Internet-of Things (IoT) for factories and industrial automation

Cognitive radio (CR) is fast emerging as a promising technology that can meet the machine-to machine (M2M) communication requirements for spectrum utilization and power control for large number of machines/devices expected to be connected to the Internet-of Things (IoT). Power control in CR as a secondary user can been modelled as a non-cooperative game cost function to quantify and reduce its effects of interference while occupying the same spectrum as primary user without adversely affecting the required quality of service (QoS) in the network. In this paper a power loss exponent that factors in diverse operating environments for IoT is employed in the non-cooperative game cost function to quantify the required power of transmission in the network. The approach would enable various CRs to transmit with lesser power thereby saving battery consumption or increasing the number of secondary users thereby optimizing the network resources efficiently.

Medidas de eficiência energética numa indústria cerâmica

O presente relatório resulta de um estágio realizado no âmbito da eficiência energética assente no programa Galp 20-20-20 que tem por génese uma parceria entre a Universidade de Aveiro e a empresa de coberturas cerâmicas, CS – Coelho da Silva S.A. A Fábrica alvo de estudo é uma consumidora intensiva de energia, despendeu no ano de 2013 cerca de 3.768 tep. Devido aos seus processos de cozedura e secagem, apresenta uma elevada dependência de Gás Natural, representando pouco mais de 78% do consumo global da fábrica. Deste consumo de energia térmica, 83% respeita ao forno e os restantes 17% encontram-se alocados ao secador, pelo que as medidas de eficiência energética presentes neste relatório centram-se da redução deste vetor energético. São então propostas três medidas para a redução da dependência deste vetor. A primeira, incide na recuperação de calor residual presente nos gases de exaustão através da instalação de um permutador de calor. Esta medida permite uma redução do consumo na ordem dos 10% e conta com um payback de 2,3 anos resultante de uma economia anual de 150.000 €. Para este estudo foi desenvolvido um modelo dinâmico em excel que permite a simulação de diversos cenários. São também propostas mais duas intervenções que incidem na alteração do circuito térmico. Estas medidas têm um impacte mais reduzido no que respeita ao percentual de redução energético, ambas com menos de 1% de redução do consumo global da fábrica. Contudo são medidas bastante interessantes dada a sua simplicidade e contam com poupanças anuais na ordem dos 6.000 € que resultam num payback inferior a 2 meses. Paralelamente executaram-se dois estudos para a iluminação, o primeiro sugere a instalação de um modelador de tensão que reduz a potência de iluminação em 36%, implicando uma redução da iluminância de cerca de 5%. A redução da potência resulta numa economia energética na ordem dos 0,4% da energia global da instalação. Este equipamento poderá ser adquirido por completo ou em renting. Ao optar pela compra integral, o investimento será apenas ressarcido em 2,8 anos resultante de uma poupança anula de perto de 6.500 €. Caso seja por renting este não tem qualquer custo adicional e as economias monetárias são partilhadas entre a empresa que fornece o equipamento e a CS-Coelho da Silva, S.A. Por fim é sugerida a substituição de parte da iluminação atual da fábrica por tecnologia LED, com esta medida reduz-se o consumo global em 0,76%. Esta medida gera uma economia monetária na ordem dos 11.500 € sendo ressarcida em 2,1 anos.

Why Does Employment Discrimination Persist against People with Mental Illness? Effects of Negative Stereotypes, Power, and Differential Discrimination

Mental illness affects a sizable minority of Americans at any given time, yet many people with mental illness (hereafter PWMI) remain unemployed or underemployed relative to the general population. Research has suggested that part of the reason for this is discrimination toward PWMI. This research investigated mechanisms that affect employment discrimination against PWMI. Drawing from theories on stigma and power, three studies assessed 1) the stereotyping of workers with mental illness as unfit for workplace success, 2) the impact of positive information on countering these negative stereotypes, and whether negatively-stereotyped conditions elicited discrimination; and 3) the effects of power on mental illness stigma components. I made a series of predictions related to theories on the Stereotype Content Model, illness attribution, the contact hypothesis, gender and mental health, and power. Studies tested predictions using, 1) an online vignette survey measuring attitudes, 2) an online survey measuring responses to fictitious applications for a middle management position, and 3) a laboratory experiment in which some participants were primed to feel powerful and some were not. Results of Study 1 demonstrated that PWMI were routinely stigmatized as incompetent, dangerous, and lacking valued employment attributes, relative to a control condition. This was especially evident for workers presented as having PTSD from wartime service and workers with schizophrenia, and when the worker was a woman. Study 2 showed that, although both war-related PTSD and schizophrenia evoke negative stereotypes, only schizophrenia evoked hiring discrimination. Finally, Study 3 found no effect of being primed to feel powerful on stigmatizing attitudes toward a person with symptoms of schizophrenia. Taken together, findings suggest that employment discrimination towards PWMI is driven by negative stereotypes; but, stereotypes might not lead to actual hiring discrimination for some labeled individuals.

Double bass and electric bass: the case study of John Patitucci

The electric bass and double bass are two different instruments sharing a common function: they link harmony with rhythm, especially when talking about jazz music. The capacity of a bassist to fully support an ensemble is something that can be achieved individually playing electric or double bass. However there are some bassists who, despite of the technical differences between these two instruments, choose to play both. Some of these performers are true masters using and switching electric and double bass according to the different musical settings. It is possible to define similarities and differences between the electric and double bass, but is it viable to use similar approaches too? In order to investigate this field, I focus my research on one exemplar player who combines all the qualities needed to both play electric than double bass: John Patitucci, an inspiration for bassists of all generations and a musician who synthesizes all the fundamental characteristics of an ideal bass player. This dissertation is inspired by Patitucci’s example and by the urge to fill a gap in the specialized literature concerning the history and application of different left and right hand techniques on the electric and double bass. The main purpose of this study is to create the backbone of a bass program for teaching both instruments using John Patitucci as example. His technical approach on both instruments and his soloing vocabulary are points of departure of this dissertation. I begin my study with the historical origins of Patitucci’s techniques ending with the development of exercises created in order to teach his techniques and vocabulary to those who aspire to play electric and double bass; RESUMO: Baixo elétrico e contrabaixo, dois instrumentos distintos que partilham uma função comum: a possibilidade de produzir um conjunto de notas capazes de interligar uma grelha harmonia a uma base rítmica, criando uma coesão estética e musical, sobretudo na música jazz. A capacidade de um baixista de conseguir alcançar de forma eficiente esta ligação como sólido suporte para um “ensemble” musical está na base de uma sua eventual afirmação profissional. Há músicos que apesar das diferencias técnicas entre estes dois instrumentos, decidiram tocar ambos; alguns deles conseguiram destacarse, usando e trocando o baixo elétrico e o contrabaixo para servir melhor diferentes situações musicais. O contrabaixo e baixo elétrico têm características em comum mas ao mesmo tempo diferem por apresentar algumas diferenças técnica substanciais; será por isso possível abordar, explorar e aprender ambos utilizando uma mesma base metodológica? Com o intuito de explorar esta possibilidade direcionei a minha pesquisa para o estudo de um músico que no curso da sua longa carreira consegui grande destaque em quanto baixista elétrico e contrabaixista. John Patitucci é a síntese desta tipologia de músico, sendo uma fonte de inspiração para baixistas de todas as gerações. Esta dissertação é inspirada no seu exemplo e no desejo de colmatar o vazio presente na literatura musical comum aos dois instrumentos sobre a história e aplicação das técnicas da mão esquerda e direita. O foco principal é a criação de uma base sólida para o futuro desenvolvimento de um programa de ensino comum para o baixo eléctrico e o contrabaixo, utilizando o vocabulário técnico e improvisativo de Patitucci como ponto de partida. A dissertação aborda as origens históricas das técnicas utilizadas por Patitucci desenvolvendo, numa fase sucessiva, exercícios criados com a função de ensinar as suas técnicas aos que desejarem aprofundar a prática do baixo elétrico e do contrabaixo.

Mathematical analysis of maximum power generated by photovoltaic systems and fitting curves for standard test conditions

The rural electrification is characterized by geographical dispersion of the population, low consumption, high investment by consumers and high cost. Moreover, solar radiation constitutes an inexhaustible source of energy and in its conversion into electricity photovoltaic panels are used. In this study, equations were adjusted to field conditions presented by the manufacturer for current and power of small photovoltaic systems. The mathematical analysis was performed on the photovoltaic rural system I- 100 from ISOFOTON, with power 300 Wp, located at the Experimental Farm Lageado of FCA/UNESP. For the development of such equations, the circuitry of photovoltaic cells has been studied to apply iterative numerical methods for the determination of electrical parameters and possible errors in the appropriate equations in the literature to reality. Therefore, a simulation of a photovoltaic panel was proposed through mathematical equations that were adjusted according to the data of local radiation. The results have presented equations that provide real answers to the user and may assist in the design of these systems, once calculated that the maximum power limit ensures a supply of energy generated. This real sizing helps establishing the possible applications of solar energy to the rural producer and informing the real possibilities of generating electricity from the sun.

An Analysis of Colombian Power Market Price Behavior from an Industrial Organization Perspective

We analyze the behavior of spot prices in the Colombian wholesale power market, using a series of models derived from industrial organization theory -- We first create a Cournot-based model that simulates the strategic behavior of the market-leader power generators, which we use to estimate two industrial organization variables, the Index of Residual Demand and the Herfindahl-Hirschman Index (HHI) -- We use these variables to create VAR models that estimate spot prices and power market impulse-response relationships -- The results from these models show that hydroelectric generators can use their water storage capability strategically to affect off-peak prices primarily, while the thermal generators can manage their capacity strategically to affect on-peak prices -- In addition, shocks to the Index of Residual Capacity and to the HHI cause spot price fluctuations, which can be interpreted as the generators´ strategic response to these shocks

Physiological and morphological responses to feeding in broad-nosed caiman (Caiman latirostris)

Broad nosed caiman are ectotherm sauropsids that naturally experience long fasting intervals. We have studied the postprandial responses by measuring oxygen consumption using respirometry, the size changes of the duodenum, the distal small intestine, and the liver, using repeated non-invasive ultrasonography, and by investigating structural changes on the level of tissues and cells by using light- and electron microscopy. The caimans showed the same rapid and reversible changes of organ size and identical histological features, down to the ultrastructure level, as previously described for other ectothermic sauropsids. We found a configuration change of the mucosa epithelium from pseudostratified during fasting to single layered during digestion, in association with hypertrophy of enterocytes by loading them with lipid droplets. Similar patterns were also found for the hepatocytes of the liver. By placing the results of our study in comparative relationship and by utilizing the phylogenetic bracket of crocodiles, birds and squamates, we suggest that the observed features are plesiomorphic characters of sauropsids. By extending the comparison to anurans, we suggest that morphological and physiological adjustments to feeding and fasting described here may have been a character of early tetrapods. In conclusion, we suggest that the ability to tolerate long fasting intervals and then swallow a single large meal as described for many sit-an-wait foraging sauropsids is a functional feature that was already present in ancestral tetrapods.

Age-Dependent Fragility and Life-Cycle Cost Analysis of Timber and Steel Distribution Poles Subjected to Hurricanes

Power distribution systems are susceptible to extreme damage from natural hazards especially hurricanes. Hurricane winds can knock down distribution poles thereby causing damage to the system and power outages which can result in millions of dollars in lost revenue and restoration costs. Timber has been the dominant material used to support overhead lines in distribution systems. Recently however, utility companies have been searching for a cost-effective alternative to timber poles due to environmental concerns, durability, high cost of maintenance and need for improved aesthetics. Steel has emerged as a viable alternative to timber due to its advantages such as relatively lower maintenance cost, light weight, consistent performance, and invulnerability to wood-pecker attacks. Both timber and steel poles are prone to deterioration over time due to decay in the timber and corrosion of the steel. This research proposes a framework for conducting fragility analysis of timber and steel poles subjected to hurricane winds considering deterioration of the poles over time. Monte Carlo simulation was used to develop the fragility curves considering uncertainties in strength, geometry and wind loads. A framework for life-cycle cost analysis is also proposed to compare the steel and timber poles. The results show that steel poles can have superior reliability and lower life-cycle cost compared to timber poles, which makes them suitable substitutes.

Dynamic mechanical-thermal, microstructural and mechanical analysis of ultra-light polymer-metal composites: influence of forming

A really particular and innovative metal-polymer sandwich material is Hybrix. Hybrix is a product developed and manufactured by Lamera AB, Gothenburg, Sweden. This innovative hybrid material is composed by two relatively thin metal layers if compared to the core thickness. The most used metals are aluminum and stainless steel and are separated by a core of nylon fibres oriented perpendicularly to the metal plates. The core is then completed by adhesive layers applied at the PA66-metal interface that once cured maintain the nylon fibres in position. This special material is very light and formable. Moreover Hybrix, depending on the specific metal which is used, can achieve a good corrosion resistance and it can be cut and punched easily. Hybrix architecture itself provides extremely good bending stiffness, damping properties, insulation capability, etc., which again, of course, change in magnitude depending in the metal alloy which is used, its thickness and core thickness. For these reasons nowadays it shows potential for all the applications which have the above mentioned characteristic as a requirement. Finally Hybrix can be processed with tools used in regular metal sheet industry and can be handled as solid metal sheets. In this master thesis project, pre-formed parts of Hybrix were studied and characterized. Previous work on Hybrix was focused on analyze its market potential and different adhesive to be used in the core. All the tests were carried out on flat unformed specimens. However, in order to have a complete description of this material also the effect of the forming process must be taken into account. Thus the main activities of the present master thesis are the following: Dynamic Mechanical-Thermal Analysis (DMTA) on unformed Hybrix samples of different thickness and on pre-strained Hybrix samples, pure epoxy adhesive samples analysis and finally moisture effects evaluation on Hybrix composite structure.

Design Optimization of Modern Machine-drive Systems for Maximum Fault Tolerant and Optimal Operation

Modern electric machine drives, particularly three phase permanent magnet machine drive systems represent an indispensable part of high power density products. Such products include; hybrid electric vehicles, large propulsion systems, and automation products. Reliability and cost of these products are directly related to the reliability and cost of these systems. The compatibility of the electric machine and its drive system for optimal cost and operation has been a large challenge in industrial applications. The main objective of this dissertation is to find a design and control scheme for the best compromise between the reliability and optimality of the electric machine-drive system. The effort presented here is motivated by the need to find new techniques to connect the design and control of electric machines and drive systems. A highly accurate and computationally efficient modeling process was developed to monitor the magnetic, thermal, and electrical aspects of the electric machine in its operational environments. The modeling process was also utilized in the design process in form finite element based optimization process. It was also used in hardware in the loop finite element based optimization process. The modeling process was later employed in the design of a very accurate and highly efficient physics-based customized observers that are required for the fault diagnosis as well the sensorless rotor position estimation. Two test setups with different ratings and topologies were numerically and experimentally tested to verify the effectiveness of the proposed techniques. The modeling process was also employed in the real-time demagnetization control of the machine. Various real-time scenarios were successfully verified. It was shown that this process gives the potential to optimally redefine the assumptions in sizing the permanent magnets of the machine and DC bus voltage of the drive for the worst operating conditions. The mathematical development and stability criteria of the physics-based modeling of the machine, design optimization, and the physics-based fault diagnosis and the physics-based sensorless technique are described in detail. To investigate the performance of the developed design test-bed, software and hardware setups were constructed first. Several topologies of the permanent magnet machine were optimized inside the optimization test-bed. To investigate the performance of the developed sensorless control, a test-bed including a 0.25 (kW) surface mounted permanent magnet synchronous machine example was created. The verification of the proposed technique in a range from medium to very low speed, effectively show the intelligent design capability of the proposed system. Additionally, to investigate the performance of the developed fault diagnosis system, a test-bed including a 0.8 (kW) surface mounted permanent magnet synchronous machine example with trapezoidal back electromotive force was created. The results verify the use of the proposed technique under dynamic eccentricity, DC bus voltage variations, and harmonic loading condition make the system an ideal case for propulsion systems.

Imaginarios sociales de adolescentes y docentes en torno al cuerpo, la corporalidad y la actividad física. Estudio cualitativo en un colegio de Bogotá, 2014-2015.

Problema. Esta investigación se aproxima al entorno escolar con el propósito de avanzar en la comprensión de los imaginarios de los adolescentes y docentes en torno al cuerpo, la corporalidad y la AF, como un elemento relevante en el diseño de programas y planes efectivos para fomento de la práctica de AF. Objetivo. Analizar los imaginarios sociales de docentes y adolescentes en torno a los conceptos de cuerpo, corporalidad y AF. Métodos. Investigación de corte cualitativo, descriptivo e interpretativo. Se realizaron entrevistas semi-estructuradas a docentes y a estudiantes entre los 12 y 18 años de un colegio público de Bogotá. Se realizó análisis de contenido. Se compararon los resultados de estudiantes por grupos de edades y género. Resultados. Docentes y estudiantes definen el cuerpo a partir de las características biológicas, las diferencias sexuales y las funciones vitales. La definición de corporalidad en los estudiantes se encuentra ligada con la imagen y la apariencia física; los docentes la entienden como la posibilidad de interactuar con el entorno y como la materialización de la existencia. La AF en los estudiantes se asocia con la práctica de ejercicio y deporte, en los docentes se comprende como una práctica de autocuidado que permite el mantenimiento de la salud. Conclusiones. Para promover la AF tempranamente como una experiencia vital es necesario intervenir los espacios escolares. Hay que vincular al cuerpo a los procesos formativos con el propósito de desarrollar la autonomía corporal, este aspecto implica cambios en los currículos.