881 resultados para Interaction modeling. Model-based development. Interaction evaluation.
Resumo:
Thesis (Master's)--University of Washington, 2016-06
Resumo:
In a previous paper, Hoornaert et al. (Powder Technol. 96 (1998); 116-128) presented data from granulation experiments performed in a 50 L Lodige high shear mixer. In this study that same data was simulated with a population balance model. Based on an analysis of the experimental data, the granulation process was divided into three separate stages: nucleation, induction, and coalescence growth. These three stages were then simulated separately, with promising results. it is possible to derive a kernel that fit both the induction and the coalescence growth stage. Modeling the nucleation stage proved to be more challenging due to the complex mechanism of nucleus formation. From this work some recommendations are made for the improvement of this type of model.
Resumo:
It is generally accepted that growth of eutectic silicon in aluminium-silicon alloys occurs by a twin plane re-entrant edge (TPRE) mechanism. It has been proposed that modification of eutectic silicon by trace additions occurs due to a massive increase in the twin density caused by atomic effects at the growth interface. In this study, eutectic microstructures and silicon twin densities in samples modified by elemental additions of barium (Ba), calcium (Ca), yttrium (Y) and ytterbium (Yb) (elements chosen due to a near-ideal atomic radii for twinning) in an A356.0 alloy have been determined by optical microscopy, thermal analysis, X-ray diffractometry (XRD) and transmission electron microscopy (TEM). Addition of barium or calcium caused the silicon structure to transform to a fine fibrous morphology, while the addition of yttrium or ytterbium resulted in a refined plate-like eutectic structure. Twin densities in all modified samples are higher than in unmodified alloys, and there are no significant differences between fine fibrous modification (by Ba and Ca) and refined plate-like modification (by Y and Yb). The twin density in all modified samples is less than expected based on the predictions by the impurity induced twining model. Based on these results it is difficult to explain the modification with Ba, Ca, Y and Yb by altered twin densities alone.
Resumo:
The phenotypic and genetic factor structure of performance on five Multidimensional Aptitude Battery (MAB) subtests and one Wechsler Adult Intelligence Scale-Revised (WAIS-R) subtest was explored in 390 adolescent twin pairs (184 monozygotic [MZ]; 206 dizygotic (DZ)). The temporal stability of these measures was derived from a subsample of 49 twin pairs, with test-retest correlations ranging from .67 to .85. A phenotypic factor model, in which performance and verbal factors were correlated, provided a good fit to the data. Genetic modeling was based on the phenotypic factor structure, but also took into account the additive genetic (A), common environmental (C), and unique environmental (E) parameters derived from a fully saturated ACE model. The best fitting model was characterized by a genetic correlated two-factor structure with specific effects, a general common environmental factor, and overlapping unique environmental effects. Results are compared to multivariate genetic models reported in children and adults, with the most notable difference being the growing importance of common genes influencing diverse abilities in adolescence. (C) 2003 Elsevier Inc. All rights reserved.
Resumo:
Community-based coastal resource management has been widely applied within the Philippines. However, small-scale community-based reserves are often inefficient owing to management inadequacies arising because of a lack of local support or enforcement or poor design. Because there are many potential pitfalls during the establishment of even small community-based reserves, it is important for coastal managers, communities, and facilitating institutions to have access to a summary of the key factors for success. Reviewing relevant literature, we present a framework of lessons learned during the establishment of protected areas, mainly in the Philippines. The framework contains summary guidance on the importance of (1) an island location, (2) small community population size, (3) minimal effect of land-based development, (4) application of a bottom-up approach, (5) an external facilitating institution, (6) acquisition of title, (7) use of a scientific information database, (8) stakeholder involvement, (9) the establishment of legislation, (10) community empowerment, (11) alternative livelihood schemes, (12) surveillance, (13) tangible management results, (14) continued involvement of external groups after reserve establishment, and (15) small-scale project expansion. These framework components guided the establishment of a community-based protected area at Danjugan Island, Negros Occidental, Philippines. This case study showed that the framework was a useful guide that led to establishing and implementing a community-based marine reserve. Evaluation of the reserve using standard criteria developed for the Philippines shows that the Danjugan Island protected area can be considered successful and sustainable. At Danjugan Island, all of the lessons synthesized in the framework were important and should be considered elsewhere, even for relatively small projects. As shown in previous projects in the Philippines, local involvement and stewardship of the protected area appeared particularly important for its successful implementation. The involvement of external organizations also seemed to have a key role in the success of the Danjugan Island project by guiding local decision-makers in the sociobiological principles of establishing protected areas. However, the relative importance of each component of the framework will vary between coastal management initiatives both within the Philippines and across the wider Asian region.
Resumo:
Background Reliable information on causes of death is a fundamental component of health development strategies, yet globally only about one-third of countries have access to such information. For countries currently without adequate mortality reporting systems there are useful models other than resource-intensive population-wide medical certification. Sample-based mortality surveillance is one such approach. This paper provides methods for addressing appropriate sample size considerations in relation to mortality surveillance, with particular reference to situations in which prior information on mortality is lacking. Methods The feasibility of model-based approaches for predicting the expected mortality structure and cause composition is demonstrated for populations in which only limited empirical data is available. An algorithm approach is then provided to derive the minimum person-years of observation needed to generate robust estimates for the rarest cause of interest in three hypothetical populations, each representing different levels of health development. Results Modelled life expectancies at birth and cause of death structures were within expected ranges based on published estimates for countries at comparable levels of health development. Total person-years of observation required in each population could be more than halved by limiting the set of age, sex, and cause groups regarded as 'of interest'. Discussion The methods proposed are consistent with the philosophy of establishing priorities across broad clusters of causes for which the public health response implications are similar. The examples provided illustrate the options available when considering the design of mortality surveillance for population health monitoring purposes.
Resumo:
The leaching of elements from the surface of charged fly ash particles is known to be an unsteady process. The mass transfer resistance provided by the diffuse double layer has been quantified as one of the reasons for this delayed leaching. In this work, a model based on mass transfer principles for predicting the concentration of calcium hydroxide in the diffuse double layer is presented. The significant difference between predicted calcium hydroxide concentration and the experimentally measured is explained.
Resumo:
This paper describes a biventricular model, which couples the electrical and mechanical properties of the heart, and computer simulations of ventricular wall motion and deformation by means of a biventricular model. In the constructed electromechanical model, the mechanical analysis was based on composite material theory and the finite-element method; the propagation of electrical excitation was simulated using an electrical heart model, and the resulting active forces were used to calculate ventricular wall motion. Regional deformation and Lagrangian strain tensors were calculated during the systole phase. Displacements, minimum principal strains and torsion angle were used to describe the motion of the two ventricles. The simulations showed that during the period of systole, (1) the right ventricular free wall moves towards the septum, and at the same time, the base and middle of the free wall move towards the apex, which reduces the volume of the right ventricle; the minimum principle strain (E3) is largest at the apex, then at the middle of the free wall and its direction is in the approximate direction of the epicardial muscle fibres; (2) the base and middle of the left ventricular free wall move towards the apex and the apex remains almost static; the torsion angle is largest at the apex; the minimum principle strain E3 is largest at the apex and its direction on the surface of the middle wall of the left ventricle is roughly in the fibre orientation. These results are in good accordance with results obtained from MR tagging images reported in the literature. This study suggests that such an electromechanical biventricular model has the potential to be used to assess the mechanical function of the two ventricles, and also could improve the accuracy ECG simulation when it is used in heart torso model-based body surface potential simulation studies.
Resumo:
Pervasive computing applications must be engineered to provide unprecedented levels of flexibility in order to reconfigure and adapt in response to changes in computing resources and user requirements. To meet these challenges, appropriate software engineering abstractions and infrastructure are required as a platform on which to build adaptive applications. In this paper, we demonstrate the use of a disciplined, model-based approach to engineer a context-aware Session Initiation Protocol (SIP) based communication application. This disciplined approach builds on our previously developed conceptual models and infrastructural components, which enable the description, acquisition, management and exploitation of arbitrary types of context and user preference information to enable adaptation to context changes
Resumo:
Model transformations are an integral part of model-driven development. Incremental updates are a key execution scenario for transformations in model-based systems, and are especially important for the evolution of such systems. This paper presents a strategy for the incremental maintenance of declarative, rule-based transformation executions. The strategy involves recording dependencies of the transformation execution on information from source models and from the transformation definition. Changes to the source models or the transformation itself can then be directly mapped to their effects on transformation execution, allowing changes to target models to be computed efficiently. This particular approach has many benefits. It supports changes to both source models and transformation definitions, it can be applied to incomplete transformation executions, and a priori knowledge of volatility can be used to further increase the efficiency of change propagation.
Resumo:
O trabalho proposto é a montar um projeto exploratório funcional que parta da cartografia cognitiva, que é definida como a arte, teoria e técnica de construir mapas do conhecimento, visando com esta cartografia a sua aplicabilidade na estruturação de um conjunto de cursos/saberes da área da Comunicação. Assemelhado ao conceito de mapas conceituais, ou cognitivos, representam o conhecimento organizado e são compostos por conceitos. Este mapas foram desenvolvido a partir da década de setenta por vários pesquisadores. A tese experimento foi montada tendo como base os softwares de relacionamento por temas e interesses dentro de um ambiente de interatividade tridimensional , montado no conceito de arvore do conhecimento relacional. Esta experiência é construída em ambiente tridimensional com uso de softwares 3D que rodam como aplicativos de engines de vídeo games, que são motores gráficos. A base de dados e a interatividade de textos e tarefas é realizada sob a plataforma do MediaWiki, que é o software aberto que roda a Wikipédia. A plataforma de mapas roda dentro de um software MindJet MindManager e do CMAPS. As vídeo conferências são administradas pelo FlashMeeting, de Web conferência. A maioria deles são softwares abertos. Todos operando em sistemas presenciais ou de modulação EAD. A base conceitual está estruturada dentro de uma visão de educação disruptiva, que lança um novo modelo educacional baseado em mapas, visto dentro de uma abordagem de um mundo de múltiplas telas, um mundo da era hiper, um mundo hipermoderno, que tem como base uma cultura da era tecnológica, numa renovação dos conceitos de Cultura, agora revigorados à luz das novas tecnologias e da nova sociedade interligada em rede.
Resumo:
This article proposes a framework of alternative international marketing strategies, based on the evaluation of intra- and inter-cultural behavioural homogeneity for market segmentation. The framework developed in this study provides a generic structure to behavioural homogeneity, proposing consumer involvement as a construct with unique predictive ability for international marketing strategy decisions. A model-based segmentation process, using structural equation models, is implemented to illustrate the application of the framework.
Resumo:
Signal integration determines cell fate on the cellular level, affects cognitive processes and affective responses on the behavioural level, and is likely to be involved in psychoneurobiological processes underlying mood disorders. Interactions between stimuli may subjected to time effects. Time-dependencies of interactions between stimuli typically lead to complex cell responses and complex responses on the behavioural level. We show that both three-factor models and time series models can be used to uncover such time-dependencies. However, we argue that for short longitudinal data the three factor modelling approach is more suitable. In order to illustrate both approaches, we re-analysed previously published short longitudinal data sets. We found that in human embryonic kidney 293 cells cells the interaction effect in the regulation of extracellular signal-regulated kinase (ERK) 1 signalling activation by insulin and epidermal growth factor is subjected to a time effect and dramatically decays at peak values of ERK activation. In contrast, we found that the interaction effect induced by hypoxia and tumour necrosis factor-alpha for the transcriptional activity of the human cyclo-oxygenase-2 promoter in HEK293 cells is time invariant at least in the first 12-h time window after stimulation. Furthermore, we applied the three-factor model to previously reported animal studies. In these studies, memory storage was found to be subjected to an interaction effect of the beta-adrenoceptor agonist clenbuterol and certain antagonists acting on the alpha-1-adrenoceptor / glucocorticoid-receptor system. Our model-based analysis suggests that only if the antagonist drug is administer in a critical time window, then the interaction effect is relevant.
Resumo:
What does endogenous growth theory tell about regional economies? Empirics of R&D worker-based productivity growth, Regional Studies. Endogenous growth theory emerged in the 1990s as ‘new growth theory’ accounting for technical progress in the growth process. This paper examines the role of research and development (R&D) workers underlying the Romer model (1990) and its subsequent modifications, and compares it with a model based on the accumulation of human capital engaged in R&D. Cross-section estimates of the models against productivity growth of European regions in the 1990s suggest that each R&D worker has a unique set of knowledge while his/her contributions are enhanced by knowledge sharing within a region as well as spillovers from other regions in proximity.
Resumo:
This paper evaluates the contribution that village appraisals can make to sustainable development in local communities in rural areas. Based upon an evaluation of the JIGSO initiative, it both outlines the strengths of this approach and argues for the necessity of proper community infrastructure if most benefit is to be gained from it.