Analysis and guidelines for implementation of EN 1090-2 Standard to assist execution class assignment of steel structures

Finnish design and consulting companies are delivering robust and cost-efficient steel structures solutions to a large number of manufacturing companies worldwide. Recently introduced EN 1090-2 standard obliges these companies to specify the execution class of steel structures for their customers. This however, requires clarifying, understanding and interpreting the sophisticated procedure of execution class assignment. The objective of this research is to provide a clear explanation and guidance through the process of execution class assignment for a given steel structure and to support the implementation of EN 1090-2 standard in Rejlers Oy, one of Finnish design and consulting companies. This objective is accomplished by creating a guideline for designers that elaborates on the four-step process of the execution class assignment for a steel structure or its part. Steps one to three define the consequence class (projected consequences of structure failure), the service category (hazards associated with the service use exploitation of steel structure) and the production category (manufacturing process peculiarities), based on the ductility class (capacity of structure to withstand deformations) and the behaviour factor (corresponds to structure seismic behaviour). The final step is the execution class assignment taking into account results of previous steps. Main research method is indepth literature review of European standards family for steel structures. Other research approach is a series of interviews of Rejlers Oy representatives and its clients, results of which have been used to evaluate the level of EN 1090-2 awareness. Rejlers Oy will use the developed novel coherent standard implementation guideline to improve its services and to obtain greater customer satisfaction.

Lean management implementation in Horizontal Technology Transfer projects

The importance of Technology Transfer activities of companies is underpinned by the changes in technological and economic environments. However, there is still a significant gap in defining possible ways for Technology Transfer projects effectiveness improvement. The Master’s Thesis overviews common problems faced by the companies in implementation of Technology Transfer projects and examines Lean management principles as possible way to improve its effectiveness. Based on the analysis of the relevant scientific literature and results of the survey, conducted among the firms of different types, the approach to Technology Transfer projects implementation with the use of Lean management principles is proposed. The approach serves to solve some of the important problems faced by the managers of Technology Transfer projects. It is envisaged that this approach can help to increase overall Technology Transfer projects’ effectiveness.

Real-time simulation of multibody systems with applications for working mobile vehicles

This dissertation describes an approach for developing a real-time simulation for working mobile vehicles based on multibody modeling. The use of multibody modeling allows comprehensive description of the constrained motion of the mechanical systems involved and permits real-time solving of the equations of motion. By carefully selecting the multibody formulation method to be used, it is possible to increase the accuracy of the multibody model while at the same time solving equations of motion in real-time. In this study, a multibody procedure based on semi-recursive and augmented Lagrangian methods for real-time dynamic simulation application is studied in detail. In the semirecursive approach, a velocity transformation matrix is introduced to describe the dependent coordinates into relative (joint) coordinates, which reduces the size of the generalized coordinates. The augmented Lagrangian method is based on usage of global coordinates and, in that method, constraints are accounted using an iterative process. A multibody system can be modelled as either rigid or flexible bodies. When using flexible bodies, the system can be described using a floating frame of reference formulation. In this method, the deformation mode needed can be obtained from the finite element model. As the finite element model typically involves large number of degrees of freedom, reduced number of deformation modes can be obtained by employing model order reduction method such as Guyan reduction, Craig-Bampton method and Krylov subspace as shown in this study The constrained motion of the working mobile vehicles is actuated by the force from the hydraulic actuator. In this study, the hydraulic system is modeled using lumped fluid theory, in which the hydraulic circuit is divided into volumes. In this approach, the pressure wave propagation in the hoses and pipes is neglected. The contact modeling is divided into two stages: contact detection and contact response. Contact detection determines when and where the contact occurs, and contact response provides the force acting at the collision point. The friction between tire and ground is modelled using the LuGre friction model, which describes the frictional force between two surfaces. Typically, the equations of motion are solved in the full matrices format, where the sparsity of the matrices is not considered. Increasing the number of bodies and constraint equations leads to the system matrices becoming large and sparse in structure. To increase the computational efficiency, a technique for solution of sparse matrices is proposed in this dissertation and its implementation demonstrated. To assess the computing efficiency, augmented Lagrangian and semi-recursive methods are implemented employing a sparse matrix technique. From the numerical example, the results show that the proposed approach is applicable and produced appropriate results within the real-time period.

Public-private partnership investments in dry ports – Russian logistics markets and risks

The investments have always been considered as an essential backbone and so-called ‘locomotive’ for the competitive economies. However, in various countries, the state has been put under tight budget constraints for the investments in capital intensive projects. In response to this situation, the cooperation between public and private sector has grown based on public-private mechanism. The promotion of favorable arrangement for collaboration between public and private sectors for the provision of policies, services, and infrastructure in Russia can help to address the problems of dry ports development that neither municipalities nor the private sector can solve alone. Especially, the stimulation of public-private collaboration is significant under the exposure to externalities that affect the magnitude of the risks during all phases of project realization. In these circumstances, the risk in the projects also is becoming increasingly a part of joint research and risk management practice, which is viewed as a key approach, aiming to take active actions on existing global and specific factors of uncertainties. Meanwhile, a relatively little progress has been made on the inclusion of the resilience aspects into the planning process of a dry ports construction that would instruct the capacity planner, on how to mitigate the occurrence of disruptions that may lead to million dollars of losses due to the deviation of the future cash flows from the expected financial flows on the project. The current experience shows that the existing methodological base is developed fragmentary within separate steps of supply chain risk management (SCRM) processes: risk identification, risk evaluation, risk mitigation, risk monitoring and control phases. The lack of the systematic approach hinders the solution of the problem of risk management processes of dry port implementation. Therefore, management of various risks during the investments phases of dry port projects still presents a considerable challenge from the practical and theoretical points of view. In this regard, the given research became a logical continuation of fundamental research, existing in the financial models and theories (e.g., capital asset pricing model and real option theory), as well as provided a complementation for the portfolio theory. The goal of the current study is in the design of methods and models for the facilitation of dry port implementation through the mechanism of public-private partnership on the national market that implies the necessity to mitigate, first and foremost, the shortage of the investments and consequences of risks. The problem of the research was formulated on the ground of the identified contradictions. They rose as a continuation of the trade-off between the opportunities that the investors can gain from the development of terminal business in Russia (i.e. dry port implementation) and risks. As a rule, the higher the investment risk, the greater should be their expected return. However, investors have a different tolerance for the risks. That is why it would be advisable to find an optimum investment. In the given study, the optimum relates to the search for the efficient portfolio, which can provide satisfaction to the investor, depending on its degree of risk aversion. There are many theories and methods in finance, concerning investment choices. Nevertheless, the appropriateness and effectiveness of particular methods should be considered with the allowance of the specifics of the investment projects. For example, the investments in dry ports imply not only the lump sum of financial inflows, but also the long-term payback periods. As a result, capital intensity and longevity of their construction determine the necessity from investors to ensure the return on investment (profitability), along with the rapid return on investment (liquidity), without precluding the fact that the stochastic nature of the project environment is hardly described by the formula-based approach. The current theoretical base for the economic appraisals of the dry port projects more often perceives net present value (NPV) as a technique superior to other decision-making criteria. For example, the portfolio theory, which considers different risk preference of an investor and structures of utility, defines net present value as a better criterion of project appraisal than discounted payback period (DPP). Meanwhile, in business practice, the DPP is more popular. Knowing that the NPV is based on the assumptions of certainty of project life, it cannot be an accurate appraisal approach alone to determine whether or not the project should be accepted for the approval in the environment that is not without of uncertainties. In order to reflect the period or the project’s useful life that is exposed to risks due to changes in political, operational, and financial factors, the second capital budgeting criterion – discounted payback period is profoundly important, particularly for the Russian environment. Those statements represent contradictions that exist in the theory and practice of the applied science. Therefore, it would be desirable to relax the assumptions of portfolio theory and regard DPP as not fewer relevant appraisal approach for the assessment of the investment and risk measure. At the same time, the rationality of the use of both project performance criteria depends on the methods and models, with the help of which these appraisal approaches are calculated in feasibility studies. The deterministic methods cannot ensure the required precision of the results, while the stochastic models guarantee the sufficient level of the accuracy and reliability of the obtained results, providing that the risks are properly identified, evaluated, and mitigated. Otherwise, the project performance indicators may not be confirmed during the phase of project realization. For instance, the economic and political instability can result in the undoing of hard-earned gains, leading to the need for the attraction of the additional finances for the project. The sources of the alternative investments, as well as supportive mitigation strategies, can be studied during the initial phases of project development. During this period, the effectiveness of the investments undertakings can also be improved by the inclusion of the various investors, e.g. Russian Railways’ enterprises and other private companies in the dry port projects. However, the evaluation of the effectiveness of the participation of different investors in the project lack the methods and models that would permit doing the particular feasibility study, foreseeing the quantitative characteristics of risks and their mitigation strategies, which can meet the tolerance of the investors to the risks. For this reason, the research proposes a combination of Monte Carlo method, discounted cash flow technique, the theory of real options, and portfolio theory via a system dynamics simulation approach. The use of this methodology allows for comprehensive risk management process of dry port development to cover all aspects of risk identification, risk evaluation, risk mitigation, risk monitoring, and control phases. A designed system dynamics model can be recommended for the decision-makers on the dry port projects that are financed via a public-private partnership. It permits investors to make a decision appraisal based on random variables of net present value and discounted payback period, depending on different risks factors, e.g. revenue risks, land acquisition risks, traffic volume risks, construction hazards, and political risks. In this case, the statistical mean is used for the explication of the expected value of the DPP and NPV; the standard deviation is proposed as a characteristic of risks, while the elasticity coefficient is applied for rating of risks. Additionally, the risk of failure of project investments and guaranteed recoupment of capital investment can be considered with the help of the model. On the whole, the application of these modern methods of simulation creates preconditions for the controlling of the process of dry port development, i.e. making managerial changes and identifying the most stable parameters that contribute to the optimal alternative scenarios of the project realization in the uncertain environment. System dynamics model allows analyzing the interactions in the most complex mechanism of risk management process of the dry ports development and making proposals for the improvement of the effectiveness of the investments via an estimation of different risk management strategies. For the comparison and ranking of these alternatives in their order of preference to the investor, the proposed indicators of the efficiency of the investments, concerning the NPV, DPP, and coefficient of variation, can be used. Thus, rational investors, who averse to taking increased risks unless they are compensated by the commensurate increase in the expected utility of a risky prospect of dry port development, can be guided by the deduced marginal utility of investments. It is computed on the ground of the results from the system dynamics model. In conclusion, the outlined theoretical and practical implications for the management of risks, which are the key characteristics of public-private partnerships, can help analysts and planning managers in budget decision-making, substantially alleviating the effect from various risks and avoiding unnecessary cost overruns in dry port projects.

Implementation of educational change in Finland: The case of the undivided basic education reform

For the past decades, educational large-scale reforms have been elaborated and implemented in many countries and often resulted in partial or complete failure. These results brought researchers to study policy processes in order to address this particular challenge. Studies on implementation processes brought to light an existing causal relationship between the implementation process and the effectiveness of a reform. This study aims to describe the implementation process of educational change in Finland, who produced efficient educational reforms over the last 50 years. The case study used for the purpose of this study is the national reform of undivided basic education (yhtenäinen peruskoulu) implemented in the end of the 1990s. Therefore, this research aims to describe how the Finnish undivided basic education reform was implemented. This research was carried out using a pluralist and structuralist approach of policy process and was analyzed according to the hybrid model of implementation process. The data were collected using a triangulation of methods, i.e. documentary research, interviews and questionnaires. The data were qualitative and were analyzed using content analysis methods. This study concludes that the undivided basic education reform was applied in a very decentralized manner, which is a reflection of the decentralized system present in Finland. Central authorities provided a clear vision of the purpose of the reform, but did not control the implementation process. They rather provided extensive support in the form of transmission of information and development of collaborative networks. Local authorities had complete autonomy in terms of decision-making and implementation process. Discussions, debates and decisions regarding implementation processes took place at the local level and included the participation of all actors present on the field. Implementation methods differ from a region to another, with is the consequence of the variation of the level of commitment of local actors but also the diversity of local realities. The reform was implemented according to existing structures and values, which means that it was in cohesion with the context in which it was implemented. These results cannot be generalized to all implementation processes of educational change in Finland but give a great insight of what could be the model used in Finland. Future studies could intent to confirm the model described here by studying other reforms that took place in Finland.

Implementation of educational change in Finland: The case of the undivided basic education reform

For the past decades, educational large-scale reforms have been elaborated and implemented in many countries and often resulted in partial or complete failure. These results brought researchers to study policy processes in order to address this particular challenge. Studies on implementation processes brought to light an existing causal relationship between the implementation process and the effectiveness of a reform. This study aims to describe the implementation process of educational change in Finland, who produced efficient educational reforms over the last 50 years. The case study used for the purpose of this study is the national reform of undivided basic education (yhtenäinen peruskoulu) implemented in the end of the 1990s. Therefore, this research aims to describe how the Finnish undivided basic education reform was implemented. This research was carried out using a pluralist and structuralist approach of policy process and was analyzed according to the hybrid model of implementation process. The data were collected using a triangulation of methods, i.e. documentary research, interviews and questionnaires. The data were qualitative and were analyzed using content analysis methods. This study concludes that the undivided basic education reform was applied in a very decentralized manner, which is a reflection of the decentralized system present in Finland. Central authorities provided a clear vision of the purpose of the reform, but did not control the implementation process. They rather provided extensive support in the form of transmission of information and development of collaborative networks. Local authorities had complete autonomy in terms of decision-making and implementation process. Discussions, debates and decisions regarding implementation processes took place at the local level and included the participation of all actors present on the field. Implementation methods differ from a region to another, with is the consequence of the variation of the level of commitment of local actors but also the diversity of local realities. The reform was implemented according to existing structures and values, which means that it was in cohesion with the context in which it was implemented. These results cannot be generalized to all implementation processes of educational change in Finland but give a great insight of what could be the model used in Finland. Future studies could intent to confirm the model described here by studying other reforms that took place in Finland.

Design and implementation of machine vision system for the mobile assembly robot

The review of intelligent machines shows that the demand for new ways of helping people in perception of the real world is becoming higher and higher every year. This thesis provides information about design and implementation of machine vision for mobile assembly robot. The work has been done as a part of LUT project in Laboratory of Intelligent Machines. The aim of this work is to create a working vision system. The qualitative and quantitative research were done to complete this task. In the first part, the author presents the theoretical background of such things as digital camera work principles, wireless transmission basics, creation of live stream, methods used for pattern recognition. Formulas, dependencies and previous research related to the topic are shown. In the second part, the equipment used for the project is described. There is information about the brands, models, capabilities and also requirements needed for implementation. Although, the author gives a description of LabVIEW software, its add-ons and OpenCV which are used in the project. Furthermore, one can find results in further section of considered thesis. They mainly represented by screenshots from cameras, working station and photos of the system. The key result of this thesis is vision system created for the needs of mobile assembly robot. Therefore, it is possible to see graphically what was done on examples. Future research in this field includes optimization of the pattern recognition algorithm. This will give less response time for recognizing objects. Presented by author system can be used also for further activities which include artificial intelligence usage.

The impact of scheduling on the implementation of the new Ontario curriculum: teachers' perceptions /

This qualitative study explored secondary teachers' perceptions of scheduling in relation to pedagogy, curriculum, and observation of student learning. Its objective was to determine the best way to organize the scheduling for the delivery of Ontario's new 4-year curriculum. Six participants were chosen. Two were teaching in a semestered timetable, 1 in a traditional timetable, and 3 had experience in both schedules. Participants related a pressure cooker "lived experience" with weaker students in the semester system experiencing a particularly harsh environment. The inadequate amount of time for review in content-heavy courses, gap scheduling problems, catch-up difficulties for students missing classes, and the fast pace of semestering are identified as factors negatively impacting on these students. Government testing adds to the pressure by shifting teachers' time and attention in the classroom from deeper learning to a superficial coverage of material, from curriculum as lived to curriculum as text to be covered. Scheduling choice should be available in public education to accommodate the needs of all students. Curriculum guidelines need to be revamped to reflect the content that teachers believe is necessary for a successful course delivery. Applied level courses need to be developed for students who are not academically inferior but learn differently.

Openness and privacy in Ontario: an evaluation of the implementation of FIPPA : (The Freedom of Information and Protection of Privacy Act, 1987, Chapter 25 and Ontario Regulation 532/87) /

Since the early 1970's, Canadians have expressed many concerns about the growth of government and its impact on their daily lives. The public has requested increased access to government documents and improved protection of the personal information which is held in government files and data banks. At the same time, both academics and practitioners in the field of public administration have become more interested in the values that public servants bring to their decisions and recommendations. Certain administrative values, such as accountability and integrity, have taken on greater relative importance. The purpose of this thesis is to examine the implementation of Ontario's access and privacy law. It centres on the question of whether or not the Freedom of Information and Protection of Privacy Act, 1987, (FIPPA) has answered the demand for open access to government while at the same time protecting the personal privacy of individual citizens. It also assesses the extent to which this relatively new piece of legislation has made a difference to the people of Ontario. The thesis presents an overview of the issues of freedom of information and protection of privacy in Ontario. It begins with the evolution of the legislation and a description of the law itself. It focuses on the structures and processes which have been established to meet the procedural and administrative demands of the Act. These structures and processes are evaluated in two ways. First, the thesis evaluates how open the Ontario government has become and, second, it determines how Ill carefully the privacy rights of individuals are safeguarded. An analytical framework of administrative values is used to evaluate the overall performance of the government in these two areas. The conclusion is drawn that, overall, the Ontario government has effectively implemented the Freedom of Information and Protection of Privacy Act, particularly by providing access to most government-held documents. The protection of individual privacy has proved to be not only more difficult to achieve, but more difficult to evaluate. However, the administrative culture of the Ontario bureaucracy is shown to be committed to ensuring that the access and privacy rights of citizens are respected.

Elementary computer-mediated online distance education : identification of criteria for successful implementation and practice

This study had three purposes related to the effective implem,entation and practice of computer-mediated online distance education (C-MODE) at the elementary level: (a) To identify a preliminary framework of criteria 'or guidelines for effective implementation and practice, (b) to identify areas ofC-MODE for which criteria or guidelines of effectiveness have not yet been developed, and (c) to develop an implementation and practice criteria questionnaire based on a review of the distance education literature, and to use the questionnaire in an exploratory survey of elementary C-MODE practitioners. Using the survey instrument, the beliefs and attitudes of 16 elementary C'- MODE practitioners about what constitutes effective implementation and practice principles were investigated. Respondents, who included both administrators and instructors, provided information about themselves and the program in which they worked. They rated 101 individual criteria statenlents on a 5 point Likert scale with a \. point range that included the values: 1 (Strongly Disagree), 2 (Disagree), 3 (Neutral or Undecided), 4 (Agree), 5 (Strongly Agree). Respondents also provided qualitative data by commenting on the individual statements, or suggesting other statements they considered important. Eighty-two different statements or guidelines related to the successful implementation and practice of computer-mediated online education at the elementary level were endorsed. Response to a small number of statements differed significantly by gender and years of experience. A new area for investigation, namely, the role ofparents, which has received little attention in the online distance education literature, emerged from the findings. The study also identified a number of other areas within an elementary context where additional research is necessary. These included: (a) differences in the factors that determine learning in a distance education setting and traditional settings, (b) elementary students' ability to function in an online setting, (c) the role and workload of instructors, (d) the importance of effective, timely communication with students and parents, and (e) the use of a variety of media.

Implementation of hospital-wide computer information system :a case study of this change process

This case study examines the impact of a computer information system as it was being implemented in one Ontario hospital. The attitudes of a cross section of the hospital staff acted as a barometer to measure their perceptions of the implementation process. With The Mississauga Hospital in the early stages of an extensive computer implementation project, the opportunity existed to identify staff attitudes about the computer system, overall knowledge and compare the findings with the literature. The goal of the study was to develop a greater base about the affective domain in the relationship between people and the computer system. Eight exploratory questions shaped the focus of the investigation. Data were collected from three sources: a survey questionnaire, focused interviews, and internal hospital documents. Both quantitative and qualitative data were analyzed. Instrumentation in the study consisted of a survey distributed at two points in time to randomly selected hospital employees who represented all staff levels.Other sources of data included hospital documents, and twenty-five focused interviews with staff who replied to both surveys. Leavitt's socio-technical system, with its four subsystems: task, structure, technology, and people was used to classify staff responses to the research questions. The study findings revealed that the majority of respondents felt positive about using the computer as part of their jobs. No apparent correlations were found between sex, age, or staff group and feelings about using the computer. Differences in attitudes, and attitude changes were found in potential relationship to the element of time. Another difference was found in staff group and perception of being involved in the decision making process. These findings and other evidence about the role of change agents in this change process help to emphasize that planning change is one thing, managing the transition is another.

Teachers' perspectives on the implementation of expectations-based curricula /

This qualitative study examines teachers' experiences implementing new standardized curricula in Ontario schools. This new curricula contained several policy changes and an expectations based format which directed what knowledge and skills students were to demonstrate in each subject. This level of specificity of subject-content served to control teachers in relation to curricula; however, data suggested that at the same time, teachers had enormous flexibility in terms of pedagogy. Four secondary teachers who were implementing a Grade 10 course in the 2000-2001 school year participated in the study. The qualitative framework supported the researcher's emphasis on examining the participants' perspectives on the implementation of expectation-based curricula. Data collected included transcripts from interviews conducted with teacher participants and a representative of the Ontario Ministry of Education and Training, field notes, and a research journal. Many of the factors often cited in the literature as influencing implementation practices were found to have affected the participants' experiences of curriculum implementation: time, professional development, and teachers' beliefs, particularly concerning students. In addition, the format of the policy documents proved to both control and free teachers during the implementation process. Participants believed that the number of specific expectations did not provide them an opportunity to add content to the curriculum; at the same time, teachers also noted that the general format of the policy document allowed them to direct instruction to match students' needs and their own teaching preferences. Alignment between teachers' beliefs about education and their understanding of the new curriculum affected the ways in which many participants adapted during the implementation process.

The development, assessment, and implementation of an evaluation of the EMPOWER Program at shelters for abused women /

The development, assessment, and implementation of a program evaluation instrument was carried out to evaluate the impact and efficacy of the EMPOWER Program. This intervention was created to educate residents at a shelter for abused women with an anticipated outcome of prevention. Participants included the staff and residents at 2 shelters in Southern Ontario. Client pre, post and follow-up measures were obtained and analyzed statistically and using keyword content analysis. A single staff measure was obtained and summarized using keyword content analysis. Qualitative results were suggestive of important change in participants. All women in the post and follow-up measures believed their participation in the EMPOWER Program provided them with the knowledge, skills, and confidence to avoid abusive relationships in the fliture. This transformational impact was repeatedly expressed in both resident and staff feedback. Limitations of this research, as well as suggestions for future study were discussed.

Disrupting heterosexual space? : the implementation of a campus Positive Space Campaign

Drawing on a growing literature on the interconnection of queer theory, sexuality and space, this thesis critically assesses the development, implementation and impact of a campus-based Positive Space Campaign aimed at raising the visibility and number of respectful, supportive, educational and welcoming spaces for lesbian, gay, bi, trans, two-spirited, queer and questioning (LGBTQ) students staff and faculty. The analysis, based on participatory action research (PAR), interrogates the extent to which the Positive Space Campaign challenges heteronormativity on campus. I contend that the Campaign, in its attempt to challenge dominant notions of sex, gender and sexuality, disrupts heterosexual space. Further, as I consider the meanings of 'queer', I consider the extent to which Positive Space Campaigns may be 'queering' space, by contributing to an 'imagined' campus space free of sexual and gender-based discrimination. The case study contributes to queer theory, the literature on sexuality and space, the literature on queer organizing in educational spaces and to broader queer organizing efforts in Canada.

What gets plans off the shelf? : a multi-site case study of the factors influencing municipal recreation plan implementation

Municipalities that engage in recreation planning have the potential to use their resources more effectively. However, successful planning means getting the plan off the shelf and implemented. This study investigated the factors that influenced municipal recreation plan implementation in three municipalities. Interviews were conducted with eleven key informants (recreation directors, planning consultants, a city councillor, and members of plan steering committees). The findings of this study suggested that because the implementation of recreation plans occurs in a highly political environment, recreation professionals will need effective strategies to get their plans implemented and that implementation can be facilitated by developing or expanding strategies that: (l) build the power of the recreation department within the municipal government structure; (2) build support for recreation within the local community; and (3) build the political and organizational capacity in the recreation department.