Immunohistochemical evaluation of fibrillar components of the extracellular matrix of transversalis fascia and anterior abdominal rectus sheath in men with inguinal hernia

OBJECTIVE: to evaluate the role of fibrillar extracellular matrix components in the pathogenesis of inguinal hernias. METHODS: samples of the transverse fascia and of the anterior sheath of the rectus abdominis muscle were collected from 40 men aged between 20 and 60 years with type II and IIIA Nyhus inguinal hernia and from 10 fresh male cadavers (controls) without hernia in the same age range. The staining technique was immunohistochemistry for collagen I, collagen III and elastic fibers; quantification of fibrillar components was performed with an image analysis processing software. RESULTS: no statistically significant differences were found in the amount of elastic fibers, collagen I and collagen III, and the ratio of collagen I / III among patients with inguinal hernia when compared with subjects without hernia. CONCLUSION: the amount of fibrillar extracellular matrix components did not change in patients with and without inguinal hernia.

Understanding the in vitro dissolution rate of glasses with respect to future clinical applications

Glass is a unique material with a long history. Several glass products are used daily in our everyday life, often unnoticed. Glass can be found not only in obvious applications such as tableware, windows, and light bulbs, but also in tennis rackets, windmill turbine blades, optical devices, and medical implants. The glasses used at present as implants are inorganic silica-based melt-derived compositions mainly for hard-tissue repair as bone graft substitute in dentistry and orthopedics. The degree of glass reactivity desired varies according to implantation situation and it is vital that the ion release from any glasses used in medical applications is controlled. Understanding the in vitro dissolution rate of glasses provides a first approximation of their behavior in vivo. Specific studies concerning dissolution properties of bioactive glasses have been relatively scarce and mostly concentrated to static condition studies. The motivation behind this work was to develop a simple and accurate method for quantifying the in vitro dissolution rate of highly different types of glass compositions with interest for future clinical applications. By combining information from various experimental conditions, a better knowledge of glass dissolution and the suitability of different glasses for different medical applications can be obtained. Thus, two traditional and one novel approach were utilized in this thesis to study glass dissolution. The chemical durability of silicate glasses was tested in water and TRIS-buffered solution at static and dynamic conditions. The traditional in vitro testing with a TRISbuffered solution under static conditions works well with bioactive or with readily dissolving glasses, and it is easy to follow the ion dissolution reactions. However, in the buffered solution no marked differences between the more durable glasses were observed. The hydrolytic resistance of the glasses was studied using the standard procedure ISO 719. The relative scale given by the standard failed to provide any relevant information when bioactive glasses were studied. However, the clear differences in the hydrolytic resistance values imply that the method could be used as a rapid test to get an overall idea of the biodegradability of glasses. The standard method combined with the ion concentration and pH measurements gives a better estimate of the hydrolytic resistance because of the high silicon amount released from a glass. A sensitive on-line analysis method utilizing inductively coupled plasma optical emission spectrometer and a flow-through micro-volume pH electrode was developed to study the initial dissolution of biocompatible glasses. This approach was found suitable for compositions within a large range of chemical durability. With this approach, the initial dissolution of all ions could be measured simultaneously and quantitatively, which gave a good overall idea of the initial dissolution rates for the individual ions and the dissolution mechanism. These types of results with glass dissolution were presented for the first time during the course of writing this thesis. Based on the initial dissolution patterns obtained with the novel approach using TRIS, the experimental glasses could be divided into four distinct categories. The initial dissolution patterns of glasses correlated well with the anticipated bioactivity. Moreover, the normalized surface-specific mass loss rates and the different in vivo models and the actual in vivo data correlated well. The results suggest that this type of approach can be used for prescreening the suitability of novel glass compositions for future clinical applications. Furthermore, the results shed light on the possible bioactivity of glasses. An additional goal in this thesis was to gain insight into the phase changes occurring during various heat treatments of glasses with three selected compositions. Engineering-type T-T-T curves for glasses 1-98 and 13-93 were stablished. The information gained is essential in manufacturing amorphous porous implants or for drawing of continuous fibers of the glasses. Although both glasses can be hot worked to amorphous products at carefully controlled conditions, 1-98 showed one magnitude greater nucleation and crystal growth rate than 13-93. Thus, 13-93 is better suited than 1-98 for working processes which require long residence times at high temperatures. It was also shown that amorphous and partially crystalline porous implants can be sintered from bioactive glass S53P4. Surface crystallization of S53P4, forming Na2O∙CaO∙2SiO2, was observed to start at 650°C. The secondary crystals of Na2Ca4(PO4)2SiO4, reported for the first time in this thesis, were detected at higher temperatures, from 850°C to 1000°C. The crystal phases formed affected the dissolution behavior of the implants in simulated body fluid. This study opens up new possibilities for using S53P4 to manufacture various structures, while tailoring their bioactivity by controlling the proportions of the different phases. The results obtained in this thesis give valuable additional information and tools to the state of the art for designing glasses with respect to future clinical applications. With the knowledge gained we can identify different dissolution patters and use this information to improve the tuning of glass compositions. In addition, the novel online analysis approach provides an excellent opportunity to further enhance our knowledge of glass behavior in simulated body conditions.

PTEN expression in patients with carcinoma of the cervix and its association with p53, Ki-67 and CD31

PURPOSE: To investigate protein expression and mutations in phosphatase and tensin homolog (PTEN) in patients with stage IB cervical squamous cell carcinoma (CSCC) and the association with clinical-pathologic features, tumor p53 expression, cell proliferation and angiogenesis.METHODS:Women with stage IB CSCC (n=20 - Study Group) and uterine myoma (n=20 - Control Group), aged 49.1±1.7 years (mean±standard deviation, range 27-78 years), were prospectively evaluated. Patients with cervical cancer were submitted to Piver-Rutledge class III radical hysterectomy and pelvic lymphadenectomy and patients in the Control Group underwent vaginal hysterectomy. Tissue samples from the procedures were stained with hematoxylin and eosin for histological evaluation. Protein expression was detected by immunohistochemistry. Staining for PTEN, p53, Ki-67 and CD31 was evaluated. The intensity of PTEN immunostaining was estimated by computer-assisted image analysis, based on previously reported protocols. Data were analyzed using the Student's t-test to evaluate significant differences between the groups. Level of significance was set at p<0.05.RESULTS:The PTEN expression intensity was lower in the CSCC group than in the Control (benign cervix) samples (150.5±5.2 versus 204.2±2.6; p<0.001). Our study did not identify any mutations after sequencing all nine PTEN exons. PTEN expression was not associated with tumor expression of p53 (p=0.9), CD31 (p=0.8) or Ki-67 (p=0.3) or clinical-pathologic features in patients with invasive carcinoma of the cervix.CONCLUSIONS: Our findings demonstrate that the PTEN protein expression is significantly diminished in CSCC.

Epävarmuustarkastelun soveltaminen deterministisissä turvallisuusanalyyseissä

Tässä diplomityössä esitetään selvitys käytössä olevista deterministisistä turvallisuusanalyysimenetelmistä. Deterministisillä turvallisuusanalyyseillä arvioidaan ydinvoimalaitosten turvallisuutta eri käyttötilojen aikana. Voimalaitoksen turvallisuusjärjestelmät mitoitetaan deterministisen turvallisuusanalyysin tulosten perusteella. Deterministiset turvallisuusanalyysit voidaan laatia konservatiivista tai tilastollista menetelmää käyttäen. Konservatiivinen menetelmä pyrkii mallintamaan tarkasteltavan tilanteen siten, että laitoksen todellinen käyttäytyminen on hyvällä varmuudella lievempää kuin analyysitulos. Konservatiivisessa menetelmässä analyysin epävarmuudet huomioidaan konservatiivisilla oletuksilla. Tilastollinen menetelmä perustuu parhaan arvion menetelmään eli pyrkimykseen mallintaa laitoksen käyttäytyminen mahdollisimman todenmukaisesti. Tilastollisessa menetelmässä analyysin epävarmuudet määritetään systemaattisesti tilastomatematiikan keinoin. Työssä painotetaan tilastollisen analyysin epävarmuuksien määritykseen käytettäviä epävarmuustarkastelumenetelmiä. Diplomityön laskennallisessa osassa vertaillaan deterministisen turvallisuusanalyysin laadintaan käytettäviä menetelmiä termohydraulisen turvallisuusanalyysiesimerkin laskennan kautta. Laskennassa tarkasteltavana onnettomuutena on Olkiluoto 3-laitosyksikössä tapahtuva primäärijäähdytepiirin putkikatkosta aiheutuva jäähdytteenmenetysonnettomuus. Lasketun esimerkkitapauksen perusteella tilastollista ja konservatiivista menetelmää voidaan pitää vaihtoehtoisina turvallisuusanalyysin laadintaan. Molemmat analyysit tuottivat hyväksyttäviä ja toisilleen verrannollisia tuloksia, joiden suuruusluokka on sama.

Effects of topical 0.2% Cyclosporine A on corneal neovascularization induced by xenologous amniotic membrane implantation into a corneal stroma micropocket of rats

The objective of the study was to evaluate the topical effects of 0.2% Cyclosporine A (CsA) on corneal neovascularization of rats following surgical implantation of equine amniotic membrane into a corneal stroma micropocket. The implantation of xenologous amniotic membrane was performed bilaterally in 90 rats. In the same day of the surgery each right eye started receiving topical CsA twice a day. The left eye received no medication and served as a control. The evaluation of corneal neovascularization was performed by computerized image analysis and histopathological evaluation at 1, 3, 7, 15, 30 and 60 days postoperatively. For the image analysis 10 animals were used per time period, and for the histopathological examination, five animals were used per time period. Image analysis found that corneal neovascularization began on the 3rd postoperative day, reached its peak on the 7th day, and then progressively and rapidly decreased. Statistic analysis indicated that neovascularization of the CsA treated eye on the 7th day was significantly higher than that observed in untreated eyes. On the 30th day, however, this pattern was reversed with the neovascularization observed in the CsA treated eyes declining to the low levels observed on the 3rd day. The degree of neovascularization in the untreated eyes on the 30th day declined to the baseline levels found on day 3 at the 60th day. Histopathological analysis indicated that deposition of collagen in the implanted tissue was completed by the 15th day. Therefore, we concluded that (1) equine amniotic membrane in rat corneal stroma produced an intense neovascularization until the 15th day postoperatively and then regressed, (2) deposition of collagen of the implanted tissue was completed on the 15th day postoperatively, and (3) use of CsA was associated with increase in the corneal neovascularization initially, followed by a quick and intense regression.

Evaluation of Bubble Formation and Break Up in Suppression Pools by Using Pattern Recognition Methods

During a possible loss of coolant accident in BWRs, a large amount of steam will be released from the reactor pressure vessel to the suppression pool. Steam will be condensed into the suppression pool causing dynamic and structural loads to the pool. The formation and break up of bubbles can be measured by visual observation using a suitable pattern recognition algorithm. The aim of this study was to improve the preliminary pattern recognition algorithm, developed by Vesa Tanskanen in his doctoral dissertation, by using MATLAB. Video material from the PPOOLEX test facility, recorded during thermal stratification and mixing experiments, was used as a reference in the development of the algorithm. The developed algorithm consists of two parts: the pattern recognition of the bubbles and the analysis of recognized bubble images. The bubble recognition works well, but some errors will appear due to the complex structure of the pool. The results of the image analysis were reasonable. The volume and the surface area of the bubbles were not evaluated. Chugging frequencies calculated by using FFT fitted well into the results of oscillation frequencies measured in the experiments. The pattern recognition algorithm works in the conditions it is designed for. If the measurement configuration will be changed, some modifications have to be done. Numerous improvements are proposed for the future 3D equipment.

Causes of death of thoroughbred racehorses at Octavio Dupont Veterinary Hospital, Brazilian Jockey Club, Rio de Janeiro

There are few studies that approach the epidemiology of deaths in racehorses in a broad manner. The majority focus on a specific affection or procedure. Brazil does not have a program instituted for the monitoring of deaths of horses. By means of a descriptive study in association with a multivariate analysis method, an epidemiologic profile was determined for deaths related to musculoskeletal (MS), gastrointestinal (GI), respiratory (RES) systems, neurologic origin (NEU) and sudden death (SD) for the years of 2002 to 2008, at the Octavio Dupont Veterinary Hospital-Rio de Janeiro (ODVH). Males comprised the majority of deaths and that deaths were related to, decreasing order, MS>GI>SD>NEU>RES, with respect to general mortality rate per large group of determined causes (TSPMr). The majority of deaths registered included horses aged four to five years (ID4-ID5). We observed the following correspondence relations: (3-year period = SM - ID>5 - SD; ID>5 - GI; ID4-5 - MS; SF - ID<4 - RES/ NEU); (4-year period = SM - ID>5 - GI; SF - ID<4 - NEU; ID4-5 - MS; GI - ID>5). The present study points out the importance and necessity of epidemiologic studies of lesions in horses, based on diagnosis for the recognition of predisposing factors and prevention.

Das persönliche Glück auf dem unpersönlichen Markt. Deutsche und finnische Kontaktanzeigen im 20. Jahrhundert - eine kontrastive und diachrone Textsortenuntersuchung

Min avhandling är en diakronisk och kontrastiv undersökning av texttyper. Forskningsmaterialet består av kontaktannonser i tidningarna Süddeutsche Zeitung och Helsingin Sanomat under tiden 1900 – 1999. Materialet består av 652 tyska och 538 finska annonser. De undersökta annonserna har publicerats i maj och har samlats från ovannämnda tidningar vart tionde år. Materialet har analyserats med ett statistiskt SPSS-program. I avhandlingen analyseras utvecklingen av ovannämnda texttyp under hundra år i två olika kulturer, den tyska och den finska. Syftet med avhandlingen är att med hjälp av detta material finna språkliga och kulturella likheter och skillnader i kontaktannonser. Utgångspunkten är att språkliga uttryck avspeglar sin tids samhälleliga värderingar, vilka således också påverkar sökandet efter en livskamrat. Analysresultaten granskas sålunda i ett större samhälleligt sammanhang under olika decennier. Annonstexterna undersöks dock inte utgående från enskilda samhälleliga skeenden. Avhandlingen analyserar 13 olika informationsenheter i kontaktannonserna, huruvida dessa enheter förekommer under hela den aktuella perioden och om samma informationsenheter förekommer i annonser i de båda kulturerna. Avhandlingen är sålunda intra- och interlingual samt interkulturell. Genom denna metod får man fram de kännetecken som är betecknande för denna texttyp under en viss tid i de bägge kulturerna. Avhandlingen är indelad i tre delar. Den första delen ger bakgrundsinformation om äktenskapets och familjebegreppets historia samt om uppkomsten av den tyska och finska pressen. Den andra teoretiska delen behandlar text- och texttyplingvistik samt nuvarande forskning inom dessa områden. Den tredje och mest omfattade delen består av en kvalitativ och kvantitativ analys, som omfattar 11 olika forskningsdelar. Undersökningen visar att man i texttypen kontaktannonser kan upptäcka skillnader t ex redan däri att en tysk annons skiljer sig från en finsk vad längd och informationsmängd beträffar. En finsk annons förlitar sig i sin språkliga knapphet på att läsaren förstår kontexten i texttypen. Av avhandlingen framgår också att vid analys av texttyper bör deras historiska och kulturella kontext beaktas, eftersom analysen påvisar att texttyperna är historie- och kulturbundna.

Cytoskeletal proteins in the follicular wall of normal andcystic ovaries of sows

The expression of cytoskeletal proteins was evaluated immunohistochemically in 36 normal ovaries sampled from 18 sows and 44 cystic ovaries sampled from of 22 sows, was evaluated. All sows had history of reproductive problems, such as infertility or subfertility. The immunohistochemically stained area (IHCSA) was quantified through image analysis to evaluate the expression of these proteins in the follicular wall of secondary, tertiary, and cystic follicles. Cytokeratins (CK) immunoreactivity was strong in the granulosa cell layer (GC) and mild in the theca interna (TI) and externa (TE) of the normal follicles. There was severe reduction of the reaction to CK in the GC in the cystic follicles, mainly in the luteinized cysts. The immunoreactivity for vimentin was higher in the GC from normal and cystic follicles in contrast with the other follicular structures. In the luteinized cysts, the IHCSA for vimentin was significantly higher in TI and in both observed cysts, the labeling was more accentuated in TE. Immunohistochemical detection of desmin and α-SMA was restricted to the TE, without differences between the normal and cystic follicles. The results of the current study show that the development of ovarian cysts in sows is associated to changes in the expression of the cytoskeletal proteins CK and vimentin.

Fracture modes and acoustic emission characteristics of hydrogen-assisted cracking in high-strength low-alloy steel weldment

The aim of the present paper is to study the relationship between the fracture modes in hydrogen-assisted cracking (HAC) in microalloied steel and the emission of acoustic signals during the fracturing process. For this reason, a flux-cored arc weld (FCAW) was used in a high-strength low-alloy steel. The consumable used were the commercially available AWS E120T5-K4 and had a diameter of 1.6 mm. Two different shielding gases were used (CO2 and CO2+5% H2) to obtain complete phenomenon characterization. The implant test was applied with three levels of restriction stresses. An acoustic emission measurement system (AEMS) was coupled to the implant test apparatus. The output signal from the acoustic emission sensor was passed through an electronic amplifier and processed by a root mean square (RMS) voltage converter. Fracture surfaces were examined by scanning electron microscopy (SEM) and image analysis. Fracture modes were related with the intensity, the energy and the number of the peaks of the acoustic emission signal. The shielding gas CO2+5% H2 proved to be very useful in the experiments. Basically, three different fracture modes were identified in terms of fracture appearance: microvoid coalescence (MVC), intergranular (IG) and quasi-cleavage (QC). The results show that each mode of fracture presents a characteristic acoustic signal.

Determination of decomposition products of flotation collector chemicals using capillary electrophoresis

Vaahdotusta käytetään yleisesti erottamaan eri mineraaleja malmista. Tässä menetelmässä käytetään erityisiä pinta-aktiivisia aineita, joita kutsutaan kokoojakemikaaleiksi, muuntamaan halutut mineraalit hydrofobisiksi ja erottamaan ne hydrofiilisistä partikkeleista ilmakuplien avulla. Eräs tärkeimmistä kokoojakemikaalien ryhmistä on ksantaatit. Ksantaateilla on havaittu taipumusta hajota useiksi erilaisiksi hajoamistuotteiksi vaahdotusprosessin aikana. Näillä hajoamistuotteilla voi olla monia haitallisia vaikutuksia vaahdotuksen tuloksiin. Näiden tuotteiden tunnistaminen ja määrittäminen on tärkeää vaahdotusprosessin paremman ymmärtämisen kannalta. Työn kirjallisuusosassa vaahdotusprosessi, ksantaatit ja niiden yleisimmät hajoamistuotteet on esitelty, kuten myös käytetty analyysimenetelmä, kapillaarielektroforeesi. Työn kokeellisessa osassa etsittiin sopivaa erotusmenetelmää etyyliksantaatin, etyylitiokarbonaatin, etyyliperksantaatin ja etyyliksantyylitiosulfaatin erottamiseksi kapillaarilelektroforeesilla. Pääasiassa keskityttiin kahteen eri erotusmenetelmään. Ensimmäinen menetelmä kykeni erottamaan kaikki tutkitut tuotteet puhdasvesinäytteissä, ja toinen menetelmä oli sopiva näiden tuotteiden erottamiseen prosessivesinäytteissä. Jälkimmäistä menetelmää kokeiltiin käytännössä rikastamolla, jossa sillä kyettiin erottamaan isobutyyliksantaatti, isobutyylitiokarbonaatti, ja suurella todennäköisyydellä myös isobutyyliperksantaatti.

Pk-yrityksen menestystekijät kansainvälistymisprosessissa

Tutkielman tarkoitus oli selvittää, mitkä tekijät määrittelevät kansainvälistymisprosessin potentiaalista menestyjää. Aihetta on tutkittu paljon, mutta laajempi kokonaiskuva kansainvälistymisen menestystekijöistä puuttui. Tutkielman näkökulma on holistinen: Siinä yhdistettiin useampi linssi eri näkökulmia menestymiseen kansainvälistymisessä ja eri tutkimusmetodeja kvalitatiivisista kvantitatiivisiin. Tutkimuksessa käytettiin teoriasidonnaista lähestymistapaa ja konstruktiivista tutkimusotetta, jonka avulla Finpro ry:lle rakennettiin usean tutkimusvaiheen aikana potentiaalisia menestystapauksia tunnistava työkalu. Tutkimus toteutettiin neljässä vaiheessa, joissa rakennettiin kunkin vaiheen testituloksien mukainen konstruktio. Ensimmäisessä vaiheessa teemahaastattelulla selvitettiin konstruktion tarvepohja sekä rajaehdot. Konstruktion pohjaksi taulukoitiin 2001–2012 vuosien tutkimuksien tutkituimmat menestystekijät ja siihen lisättiin kansainvälistymisprosessin asiantuntijoiden korostamat menestystekijät. Tulokset yhdistettiin rakentamalla Konstruktio1. Toisessa vaiheessa Konstruktio1:sta kyselyn ja eksploratiivisen faktorianalyysin avulla faktoroitiin tärkeimmät menestymisen taustalla olevat ilmiöt, joista rakennettiin Konstruktio2. Kolmannessa vaiheessa kahden riippumattomien otosten ttestin avulla selvitettiin, mitkä Konstruktio2:n menestysfaktorit ovat tärkeimpiä ICT- ja life science -toimialoilla toimiville yrityksille ja mitä ilmiöitä yrityksen johto tai sijoittajat pitävät tärkeinä. Tuloksien pohjalta Konstruktio2 kehitettiin Konstruktio3:ksi. Neljännessä vaiheessa Konstruktio3:n pätevyyttä testattiin peilaamalla sen menestysfaktoreita kuuteen menestyjiksi todettuun tapaukseen, ja sen toimivuus selvitettiin kuuden avoimen haastattelun avulla. Tuloksien avulla Konstruktio3:sta rakennettiin Konstruktio4. Tutkimukset osoittivat, että menestystekijät vaihtelevat yrityksen kansainvälistymispolun ja eri näkökulmien mukaan. Tutkimus loi vahvan teoreettisen ja liiketoiminnallisen kontribuution. Tutkimusvaiheiden avulla hahmotettiin kansainvälistymisessä menestymisen kokonaisuus ja luottiin uusi näkemys pk-yrityksen menestymisestä. Toisaalta päästiin myös heti käyttövalmiiseen lopputulokseen, joka auttaa Finpron konsultteja ja myyjiä ymmärtämään menestymistä kansainvälistymisprosessissa ja löytämään potentiaalisia menestyjiä.

Capillary electrophoresis for monitoring of carboxylic, phenolic and amino acids in bioprocesses

Bioprocess technology is a multidisciplinary industry that combines knowledge of biology and chemistry with process engineering. It is a growing industry because its applications have an important role in the food, pharmaceutical, diagnostics and chemical industries. In addition, the current pressure to decrease our dependence on fossil fuels motivates new, innovative research in the replacement of petrochemical products. Bioprocesses are processes that utilize cells and/or their components in the production of desired products. Bioprocesses are already used to produce fuels and chemicals, especially ethanol and building-block chemicals such as carboxylic acids. In order to enable more efficient, sustainable and economically feasible bioprocesses, the raw materials must be cheap and the bioprocesses must be operated at optimal conditions. It is essential to measure different parameters that provide information about the process conditions and the main critical process parameters including cell density, substrate concentrations and products. In addition to offline analysis methods, online monitoring tools are becoming increasingly important in the optimization of bioprocesses. Capillary electrophoresis (CE) is a versatile analysis technique with no limitations concerning polar solvents, analytes or samples. Its resolution and efficiency are high in optimized methods creating a great potential for rapid detection and quantification. This work demonstrates the potential and possibilities of CE as a versatile bioprocess monitoring tool. As a part of this study a commercial CE device was modified for use as an online analysis tool for automated monitoring. The work describes three offline CE analysis methods for the determination of carboxylic, phenolic and amino acids that are present in bioprocesses, and an online CE analysis method for the monitoring of carboxylic acid production during bioprocesses. The detection methods were indirect and direct UV, and laser-induced frescence. The results of this work can be used for the optimization of bioprocess conditions, for the development of more robust and tolerant microorganisms, and to study the dynamics of bioprocesses.

Differentiation of Metabolically Distinct Areas within Head and Neck Region using Dynamic 18F-FDG Positron Emission Tomography Imaging

Positron Emission Tomography (PET) using ¹⁸F-FDG is playing a vital role in the diagnosis and treatment planning of cancer. However, the most widely used radiotracer, ¹⁸F-FDG, is not specific for tumours and can also accumulate in inflammatory lesions as well as normal physiologically active tissues making diagnosis and treatment planning complicated for the physicians. Malignant, inflammatory and normal tissues are known to have different pathways for glucose metabolism which could possibly be evident from different characteristics of the time activity curves from a dynamic PET acquisition protocol. Therefore, we aimed to develop new image analysis methods, for PET scans of the head and neck region, which could differentiate between inflammation, tumour and normal tissues using this functional information within these radiotracer uptake areas. We developed different dynamic features from the time activity curves of voxels in these areas and compared them with the widely used static parameter, SUV, using Gaussian Mixture Model algorithm as well as K-means algorithm in order to assess their effectiveness in discriminating metabolically different areas. Moreover, we also correlated dynamic features with other clinical metrics obtained independently of PET imaging. The results show that some of the developed features can prove to be useful in differentiating tumour tissues from inflammatory regions and some dynamic features also provide positive correlations with clinical metrics. If these proposed methods are further explored then they can prove to be useful in reducing false positive tumour detections and developing real world applications for tumour diagnosis and contouring.

Before internationalisation : reflections of lateral rigidity on managerial decision making

The purpose of the study is to analyse lateral rigidity in the framework of pre-internationalisation to find out its reflections on managerial decision making. The interest of the study lies in the intersection of the meaningful but relatively stagnant concept of lateral rigidity, and the pre-internationalisation phase of companies that has received only a limited amount of research attention. The theoretical basis for the study is drawn from managerial decision making and internationalisation literatures. Firstly, the study aims to define the concept of lateral rigidity in order to secondly find out how it influences managers’ pre-internationalisation decision making. The study is theoretical in nature, and is based solely on literature examination. Concept analysis method is used to determine the attributes of lateral rigidity for the purpose of recognising the concept in the pre-internationalisation framework. The attributes that are found to comprise lateral rigidity are culture, know-how, uncertainty and attitude. Furthermore, these attributes are more specifically found to consist of environmental, personal and operational matters. Through the analysis of the pre-internationalisation literature it is discovered that all the attributes appear there, and present a variety of influences on pre-internationalisation decision making that can be characterised as being negative. The study finds that culture influences managers’ decision making via subjective reasoning and behaviour that stem from a domestic inclination, and via unfamiliarity with foreign markets. Against assumption, home cultural factors, e.g. values and customs, do not appear to have an influence. Know-how is found to influence decision making via managers’ previous experiences, subjective abiding perceptions, and the usage of previous operation patterns. Uncertainty, then again, influences managers’ risk perception, unfamiliarity avoidance, and the scope of potential international operations. Attitude is found to have a robust influence on managerial decision making via the usage of familiar processes and decision regimes, subjective preference of convention, and plausible results of operations. Ergo, the effects of lateral rigidity on managers show to represent an encumbrance in the pre-internationalisation phase; even though internationalisation would take place, the related decisions and actions are highly constrained. Especially the subjectivity of managers is seen to have a meaningful role in the decision making process.