PEASANT AND SCIENTIFIC KNOWLEDGE ON PLANOSOLS AS A SOURCE OF MATERIALS IN THE MAKING OF NON-INDUSTRIAL POTTERY

Ethnopedological studies have mainly focused on agricultural land uses and associated practices. Nevertheless, peasant and indigenous populations use soil and land resources for a number of additional purposes, including pottery. In the present study, we describe and analyze folk knowledge related to the use of soils in non-industrial pottery making by peasant potters, in the municipality of Altinho, Pernambuco State, semiarid region at Brazil. Ethnoscientific techniques were used to record local knowledge, with an emphasis on describing the soil materials recognized by the potters, the properties they used to identify those soil materials, and the criteria employed by them to differentiate and relate such materials. The potters recognized three categories of soil materials: “terra” (earth), “barro” (clay) and, “piçarro” (soft rock). The multi-layered arrangement of these materials within the soil profiles was similar to the arrangement of the soil horizon described by formal pedologists. “Barro vermelho” (red clay) was considered by potters as the principal ceramic resource. The potters followed morphological and utilitarian criteria in distinguishing the different soil materials. Soils from all of these sites were sodium-affected Alfisols and correspond to Typic Albaqualf and Typic Natraqualf in the Soil Taxonomy (Soil Survey Staff, 2010).

As organizações da sociedade civil e as ONGs de educação

Esta resenha de idéias e conceitos esclarece o leitor sobre uma sucessão de termos empregados livremente nos últimos tempos: sociedade civil, ONGs, Terceiro Setor, Lei das OSC-IPs, conselhos paritários - o que vêm a ser, integrando a pauta da grande imprensa? Em abordagem simples, apresentam-se elementos da trajetória política das ONGs brasileiras dentro do cenário mais amplo da sociedade civil organizada. Discute-se o papel especial desempenhado por elas na longa luta pela socialização da educação, e seu atualíssimo dilema frente à onda de privatização de deveres constitucionais do Estado.

Qualitat i consum ceràmic de la sigillata augustal. Noves vies d'estudi i interpretació a partir de l'Arqueometria

[spa] En este estudio se presentan los resultados del trabajo realizado sobre la calidad de las diferentes producciones de terra sigillata comercializadas en época de Augusto, como paso previo al estudio del consumo. A partir de la apiicación de técnicas arqueométricas, se han establecido criterios objetivos en algunos casos, cuantitativos como son la resistencia a la ruptura de las diferentes vajillas analizadas y la adherencia y el estado de sinterización de su barniz. De este modo, ha sido posible determinar la existencia de las diversas calidades, que deben influenciar el consumo cerámico.

Primers resultats de l'estudi de la ceràmica terra sigillata de Baetulo: circulació ceràmica i aportacions cronològiques a la ciutat

Les actuacions arqueologiques portades a terme des dels anys se tanta a la ciutat de Badalona, han permes posar al descobert una part important d'estructures corresponents a la ciutat romana de Baetulo. A partir d'aquestes excavacions, l' analisi específica de la ceramica terra sigillata documentada en determinats contextos estratigrafics, on aquest tipus ceramic és l'element basic de datació, ens ha permes realitzar una revisió de les cronologies proposades inicialment per a aquests estrats i per a les estructures associades. Aquesta revisió, que afecta el període que va del regnat d' August fms a epoca flavia, ha suposat la clarificació del material de terra sigillata recuperat i, en alguns casos, la modificació de la interpretació de la seqüencia estratigrafica i la se va datació.

A 3 years retrospective study of survival for zirconia-based single crowns fabricated from intraoral digital impressions.

OBJECTIVE: To evaluate the clinical performance of glass-ceramic/zirconia crowns fabricated using intraoral digital impressions - a retrospective study with a three-year follow-up. METHODS: 70 consecutive patients with a total of 86 glass-ceramic/zirconia crowns were treated by a single clinician using standardized clinical and laboratory protocols. A complete digital workflow was adopted for the purpose except for the veneering procedure for the glass-ceramic crowns. Occlusal adjustments were made before the ceramic glazing procedure. Before cementation, all abutments where carefully cleaned with a 70% alcoholic solution and air dried. Cementation was performed using dual-curing, self-adhesive resin cement. Patients were re-examined after 12, 24 and 36 months, to assess crown chipping/fractures. RESULTS: After the three-year follow-up, none of the zirconia-based restoration was lost ("apparent" survival rate 100%) otherwise, the chipping rate of the veneering material increased from 9.3% after 12 months, to 14% after 24 months to 30.2% after 36 months. As a consequence, the "real" success rate after 3 years was 69.8%. CONCLUSIONS: After 3 years the success rate of zirconia-based crowns was 69.8%, while the incidence of the chipping was 30.2%. Assuming an exponential increase in chipping rate between 12 and 36 months it can be argued that, among others, the fatigue-mechanism could be advocated as the main factor for the failure of glass-ceramic veneered zirconia especially after 24 months.

Preliminary report of the first season work of the International Pluridisciplinary Archaeological Expedition to Bactria 2008

This year the development of our project can be divided into two main clearly different parts, on one hand the laboratory work, where the sampled ceramic individuals has been prepared and analyzed and the elaboration of the data obtained during the excavation of 2007 has been finished and, on the other hand, the field work developed at the archaeological site during this specific year (2008).In the mark of the analytical work a significant number of ceramic individuals (144) from the different stratigraphical units from various areas of the excavation of Termez and Tchinguiz Tepe sampled duringthe new and previous field works has been archaeometrically characterized. This specific material includedindividuals dated into the Hellenistic and Sassanian period, which has been confirmed by C14dating upon organic samples.At the same time, in the mark of the field work of 2008 the archaeological record, already started tobe under study during the excavation of 2007, has been completed and two new archaeological recordshave been registered on of which is located in the area of Tchinguiz Tepe. For the archeological studythe information of the previous geophysical prospecting has been indisputably taken into considerationand the same methodology has been applied to crosscheck the latter archaeological results.

Innate immune sensing of modified vaccinia virus Ankara (MVA) is mediated by TLR2-TLR6, MDA-5 and the NALP3 inflammasome.

Modified vaccinia virus Ankara (MVA) is an attenuated double-stranded DNA poxvirus currently developed as a vaccine vector against HIV/AIDS. Profiling of the innate immune responses induced by MVA is essential for the design of vaccine vectors and for anticipating potential adverse interactions between naturally acquired and vaccine-induced immune responses. Here we report on innate immune sensing of MVA and cytokine responses in human THP-1 cells, primary human macrophages and mouse bone marrow-derived macrophages (BMDMs). The innate immune responses elicited by MVA in human macrophages were characterized by a robust chemokine production and a fairly weak pro-inflammatory cytokine response. Analyses of the cytokine production profile of macrophages isolated from knockout mice deficient in Toll-like receptors (TLRs) or in the adapter molecules MyD88 and TRIF revealed a critical role for TLR2, TLR6 and MyD88 in the production of IFNbeta-independent chemokines. MVA induced a marked up-regulation of the expression of RIG-I like receptors (RLR) and the IPS-1 adapter (also known as Cardif, MAVS or VISA). Reduced expression of RIG-I, MDA-5 and IPS-1 by shRNAs indicated that sensing of MVA by RLR and production of IFNbeta and IFNbeta-dependent chemokines was controlled by the MDA-5 and IPS-1 pathway in the macrophage. Crosstalk between TLR2-MyD88 and the NALP3 inflammasome was essential for expression and processing of IL-1beta. Transcription of the Il1b gene was markedly impaired in TLR2(-/-) and MyD88(-/-) BMDM, whereas mature and secreted IL-1beta was massively reduced in NALP3(-/-) BMDMs or in human THP-1 macrophages with reduced expression of NALP3, ASC or caspase-1 by shRNAs. Innate immune sensing of MVA and production of chemokines, IFNbeta and IL-1beta by macrophages is mediated by the TLR2-TLR6-MyD88, MDA-5-IPS-1 and NALP3 inflammasome pathways. Delineation of the host response induced by MVA is critical for improving our understanding of poxvirus antiviral escape mechanisms and for designing new MVA vaccine vectors with improved immunogenicity.

EuroPhenome: a repository for high-throughput mouse phenotyping data.

The broad aim of biomedical science in the postgenomic era is to link genomic and phenotype information to allow deeper understanding of the processes leading from genomic changes to altered phenotype and disease. The EuroPhenome project (http://www.EuroPhenome.org) is a comprehensive resource for raw and annotated high-throughput phenotyping data arising from projects such as EUMODIC. EUMODIC is gathering data from the EMPReSSslim pipeline (http://www.empress.har.mrc.ac.uk/) which is performed on inbred mouse strains and knock-out lines arising from the EUCOMM project. The EuroPhenome interface allows the user to access the data via the phenotype or genotype. It also allows the user to access the data in a variety of ways, including graphical display, statistical analysis and access to the raw data via web services. The raw phenotyping data captured in EuroPhenome is annotated by an annotation pipeline which automatically identifies statistically different mutants from the appropriate baseline and assigns ontology terms for that specific test. Mutant phenotypes can be quickly identified using two EuroPhenome tools: PhenoMap, a graphical representation of statistically relevant phenotypes, and mining for a mutant using ontology terms. To assist with data definition and cross-database comparisons, phenotype data is annotated using combinations of terms from biological ontologies.

Profilage de la cocaïne : approche inter laboratoires

Introduction Actuellement, les projets européens concernant l'harmonisation des méthodes de profilage se concentrent principalement sur les drogues de type synthétique telles que les ecstasy et les dérivés de la phényléthylamine [Aalberg L. et al. 2005, Aalberg L. et al. 2005, SMT Project 2001, CHAMP Project 2003]. Néanmoins, d'après le rapport annuel 2005 de l'Agence Européenne des Drogues (EMCDDA), la cocaïne est devenue un élément majeur du paysage européen des stupéfiants. De même, les dernières statistiques de l'Office Fédéral de la Police Suisse montrent que les saisies de cocaïne ont quasiment doublé entre 2003 et 2004 pour atteindre des quantités jamais vues auparavant. Le 7ème programme cadre européen, pour la recherche et le développement technologique, propose d'ailleurs un sujet concernant «la détermination et le pistage des composés utilisés lors de la production de certaines substances ». La cocaïne est donc devenue un thème prioritaire en Europe et l'utilisation des méthodes de profilage est un moyen puissant pour établir des liens entre des saisies. Les méthodes de profilage de la cocaïne sont utilisées par quelques laboratoires mais il y a peu ou quasiment pas d'échange d'informations aussi bien concernant les données obtenues que les méthodes utilisées afin d'améliorer la lutte contre le trafic de stupéfiants. Aucune recherche relative à l'harmonisation des méthodes entre deux laboratoires n'a été réalisée à ce jour. Le projet Interreg IIIA avait pour objectif de fournir du renseignement forensique en matière de stupéfiants, plus précisément dans ce cas à la frontière franco-suisse. Le processus de profilage repose sur deux phases interconnectées. La première est consacrée au développement de la méthode analytique permettant l'extraction d'une signature chimique (alcaloïdes et autres composés d'origine, solvants, produits de coupage) ou physique (conditionnement) du produit illicite. La seconde se focalise sur l'intégration des résultats dans un but d'utilisation par les forces de police. Cette recherche s'est tout d'abord focalisée sur le profilage des alcaloïdes en optimisant et en validant la méthode analytique élaborée à l'IPS sur un même GC-FID [Guéniat O. 2004 et Esseiva P. 2004]. Ensuite, la méthode a été étendue à une comparaison de spécimens analysés sur deux appareils différents. Finalement, afin de tester les résultats obtenus par l'analyse des alcaloïdes, une méthode indépendante, la Statique Headspace couplée à un GC-FID, a été, utilisée pour le profilage des solvants. En effet, de nombreux solvants sont utilisés lors de la production de la cocaïne et il doit donc aussi, a priori, être possible d'établir des liens sur la base de cette analyse. Les informations fournies par ces deux méthodes ainsi que leur complémentarité ont été investiguées.

Systems Genetics of Metabolism: The Use of the BXD Murine Reference Panel for Multiscalar Integration of Traits.

Metabolic homeostasis is achieved by complex molecular and cellular networks that differ significantly among individuals and are difficult to model with genetically engineered lines of mice optimized to study single gene function. Here, we systematically acquired metabolic phenotypes by using the EUMODIC EMPReSS protocols across a large panel of isogenic but diverse strains of mice (BXD type) to study the genetic control of metabolism. We generated and analyzed 140 classical phenotypes and deposited these in an open-access web service for systems genetics (www.genenetwork.org). Heritability, influence of sex, and genetic modifiers of traits were examined singly and jointly by using quantitative-trait locus (QTL) and expression QTL-mapping methods. Traits and networks were linked to loci encompassing both known variants and novel candidate genes, including alkaline phosphatase (ALPL), here linked to hypophosphatasia. The assembled and curated phenotypes provide key resources and exemplars that can be used to dissect complex metabolic traits and disorders.

Fate of the herbicide glyphosate and its metabolite AMPA in soils and their transfer to surface waters: A multi-scale approach in the Lavaux vineyards, western Switzerland

The use of herbicides in agriculture may lead to environmental problems, such as surface water pollution, with a potential risk for aquatic organisms. The herbicide glyphosate is the most used active ingredient in the world and in Switzerland. In the Lavaux vineyards it is nearly the only molecule applied. This work aimed at studying its fate in soils and its transfer to surface waters, using a multi-scale approach: from molecular (10-9 m) and microscopic scales (10-6 m), to macroscopic (m) and landscape ones (103 m). First of all, an analytical method was developed for the trace level quantification of this widely used herbicide and its main by-product, aminomethylphosphonic acid (AMPA). Due to their polar nature, their derivatization with 9-fluorenylmethyl chloroformate (FMOC-Cl) was done prior to their concentration and purification by solid phase extraction. They were then analyzed by ultra performance liquid chromatography coupled with tandem mass spectrometry (UPLC-MS/MS). The method was tested in different aqueous matrices with spiking tests and validated for the matrix effect correction in relevant environmental samples. Calibration curves established between 10 and 1000ng/l showed r2 values above 0.989, mean recoveries varied between 86 and 133% and limits of detection and quantification of the method were as low as 5 and 10ng/l respectively. At the parcel scale, two parcels of the Lavaux vineyard area, located near the Lutrive River at 6km to the east of Lausanne, were monitored to assess to which extent glyphosate and AMPA were retained in the soil or exported to surface waters. They were equipped at their bottom with porous ceramic cups and runoff collectors, which allowed retrieving water samples for the growing seasons 2010 and 2011. Results revealed that the mobility of glyphosate and AMPA in the unsaturated zone was likely driven by the precipitation regime and the soil characteristics, such as slope, porosity structure and layer permeability discrepancy. Elevated glyphosate and AMPA concentrations were measured at 60 and 80 cm depth at parcel bottoms, suggesting their infiltration in the upper parts of the parcels and the presence of preferential flow in the studied parcels. Indeed, the succession of rainy days induced the gradual saturation of the soil porosity, leading to rapid infiltration through macropores, as well as surface runoff formation. Furthermore, the presence of more impervious weathered marls at 100 cm depth induced throughflows, the importance of which for the lateral transport of the herbicide molecules was determined by the slope steepness. Important rainfall events (>10 mm/day) were clearly exporting molecules from the soil top layer, as indicated by important concentrations in runoff samples. A mass balance showed that total loss (10-20%) mainly occurred through surface runoff (96%) and, to a minor extent, by throughflows in soils (4%), with subsequent exfiltration to surface waters. Observations made in the Lutrive River revealed interesting details of glyphosate and AMPA dynamics in urbanized landscapes, such as the Lavaux vineyards. Indeed, besides their physical and chemical properties, herbicide dynamics at the catchment level strongly depend on application rates, precipitation regime, land use and also on the presence of drains or constructed channels. Elevated concentrations, up to 4970 ng/l, observed just after the application, confirmed the diffuse export of these compounds from the vineyard area by surface runoff during main rain events. From April to September 2011, a total load of 7.1 kg was calculated, with 85% coming from vineyards and minor urban sources and 15% from arable crops. Small vineyard surfaces could generate high concentrations of herbicides and contribute considerably to the total load calculated at the outlet, due to their steep slopes (~10%). The extrapolated total amount transferred yearly from the Lavaux vineyards to the Lake of Geneva was of 190kg. At the molecular scale, the possible involvement of dissolved organic matter (DOM) in glyphosate and copper transport was studied using UV/Vis fluorescence spectroscopy. Combined with parallel factor (PARAFAC) analysis, this technique allowed characterizing DOM of soil and surface water samples from the studied vineyard area. Glyphosate concentrations were linked to the fulvic-like spectroscopic signature of DOM in soil water samples, as well as to copper, suggesting the formation of ternary complexes. In surface water samples, its concentrations were also correlated to copper ones, but not in a significant way to the fulvic-like signature. Quenching experiments with standards confirmed field tendencies in the laboratory, with a stronger decrease in fluorescence intensity for fulvic-like fluorophore than for more aromatic ones. Lastly, based on maximum concentrations measured in the river, an environmental risk for these compounds was assessed, using laboratory tests and ecotoxicity data from the literature. In our case and with the methodology applied, the risk towards aquatic species was found negligible (RF<1).

FM127: Systemic metal ion levels in patients with modular neck total hip arthroplasties: a prospective cohort study

There is increasing evidence that modular neck stems are prone to corrosion-related complications. Recent studies showed elevated metal ions levels and occasional pseudotumor formation in patients with such implants. The purpose of this study was to compare systemic metal-ion levels in patients after primary THA with modular neck stems to those of patients after non-modular implants. To our knowledge, this is the first cohort study including a control group, THA without CoCr heads and dry-assembled neck-stem connections. Methods: 50 patients after THA at a minimum follow-up of 1 year have been selected for the study. Patients with multiple prosthesis or other implants have been deselected. All received a cementless SPS stem from Symbios (Ti6Al4V). 40 patients have the modular neck (CoCr) version and 10 a monobloc version. All bearings were either ceramic-ceramic or ceramic-polyethylene to minimize other sources of CoCr ion release. In the modular group, the neck was chosen pre-operatively based on a 3D planning, allowing for a dry assembly of the stem and neck on the back table before implantation. A plasma system coupled to mass spectrometry was used for a complete elementary quantification in blood and serum separately. Clinical outcome was measured using the Oxford Hip Score. Results : Complete data sets of 29 patients (24 in the modular neck-group (10male, mean age 63y, 35-84y) and 5 in the monobloc-group (3 male, 69 y, 51-83y) are available to date. Mean Co blood levels were .95 ug/L (.14-12.4) in the modular group vs .27 ug/L (.10-.73) in the monobloc group (p=.2). Respective values for Cr were significantly higher in the modular group (.99 g/L; range .75-1.21) compared to those in the monobloc group (.74 g/L ;.62-.86; p=.001). No significant difference was found when comparing serum levels. 5/24 patients had Co levels above 1 g/L (12/24 for Cr), which is by some considered as a relevant elevation. The maximum Co level was measured in an asymptomatic patient. The Oxford Hip Scores were similar in both groups. Conclusion: Cr levels were significantly elevated in the modular neck group compared to those in the monobloc group. 1/24 patients with a modular prosthesis exhibited Co levels, which are beyond the threshold accepted even for metal-on-metal bearing couples. These results have contributed to our decision to abandon the use of modular neck stems. Routine follow-up including annual measurements of systemic CoCr concentrations should be considered.

Early Iron Age Pottery: A Quantitative Approach. Proceedings of the International Round Table organized by the Swiss School of Archaeology in Greece (Athens, Novembre 28-30, 2008).

Quantitative approaches in ceramology are gaining ground in excavation reports, archaeological publications and thematic studies. Hence, a wide variety of methods are being used depending on the researchers' theoretical premise, the type of material which is examined, the context of discovery and the questions that are addressed. The round table that took place in Athens on November 2008 was intended to offer the participants the opportunity to present a selection of case studies on the basis of which methodological approaches were discussed. The aim was to define a set of guidelines for quantification that would prove to be of use to all researchers. Contents: 1) Introduction (Samuel Verdan); 2) Isthmia and beyond. How can quantification help the analysis of EIA sanctuary deposits? (Catherine Morgan); 3) Approaching aspects of cult practice and ethnicity in Early Iron Age Ephesos using quantitative analysis of a Protogeometric deposit from the Artemision (Michael Kerschner); 4) Development of a ceramic cultic assemblage: Analyzing pottery from Late Helladic IIIC through Late Geometric Kalapodi (Ivonne Kaiser, Laura-Concetta Rizzotto, Sara Strack); 5) 'Erfahrungsbericht' of application of different quantitative methods at Kalapodi (Sara Strack); 6) The Early Iron Age sanctuary at Olympia: counting sherds from the Pelopion excavations (1987-1996) (Birgitta Eder); 7) L'aire du pilier des Rhodiens à Delphes: Essai de quantification du mobilier (Jean-Marc Luce); 8) A new approach in ceramic statistical analyses: Pit 13 on Xeropolis at Lefkandi (David A. Mitchell, Irene S. Lemos); 9) Households and workshops at Early Iron Age Oropos: A quantitative approach of the fine, wheel-made pottery (Vicky Vlachou); 10) Counting sherds at Sindos: Pottery consumption and construction of identities in the Iron Age (Stefanos Gimatzidis); 11) Analyse quantitative du mobilier céramique des fouilles de Xombourgo à Ténos et le cas des supports de caisson (Jean-Sébastien Gros); 12) Defining a typology of pottery from Gortyn: The material from a pottery workshop pit, (Emanuela Santaniello); 13) Quantification of ceramics from Early Iron Age tombs (Antonis Kotsonas); 14) Quantitative analysis of the pottery from the Early Iron Age necropolis of Tsikalario on Naxos (Xenia Charalambidou); 15) Finding the Early Iron Age in field survey: Two case studies from Boeotia and Magnesia (Vladimir Stissi); 16) Pottery quantification: Some guidelines (Samuel Verdan).

Survival of zirconia- and metal-supported fixed dental prostheses: a systematic review

Purpose: The aim of this review was to systematically evaluate and compare the frequency of veneer chipping and core fracture of zirconia fixed dental prostheses (FOPS) and porcelain-fused-to-metal (PFM) FDPs and determine possible influencing factors. Materials and Methods: The SCOPUS database and International Association of Dental Research abstracts were searched for clinical studies involving zirconia and PFM FDPs. Furthermore, studies that were integrated into systematic reviews on PFM FDPs were also evaluated. The principle investigators of any clinical studies on zirconia FDPs were contacted to provide additional information. Based on the available information for each FOP, a data file was constructed. Veneer chipping was divided into three grades (grade 1 = polishing, grade 2 = repair, grade 3 = replacement). To assess the frequency of veneer chipping and possible influencing factors, a piecewise exponential model was used to adjust for a study effect. Results: None of the studies on PFM FDPs (reviews and additional searching) sufficiently satisfied the criteria of this review to be included. Thirteen clinical studies on zirconia FDPs and two studies that investigated both zirconia and PFM FDPs were identified. These studies involved 664 zirconia and 134 PFM FDPs at baseline. Follow-up data were available for 595 zirconia and 127 PFM FDPs. The mean observation period was approximately 3 years for both groups. The frequency of core fracture was less than 1% in the zirconia group and 0% in the PFM group. When all studies were included, 142 veneer chippings were recorded for zirconia FDPs (24%) and 43 for PFM FDPs (34%). However, the studies differed extensively with regard to veneer chipping of zirconia: 85% of all chippings occurred in 4 studies, and 43% of all chippings included zirconia FDPs. If only studies that evaluated both types of core materials were included, the frequency of chipping was 54% for the zirconia-supported FDPs and 34% for PFM FDPs. When adjusting the survival rate for the study effect, the difference between zirconia and PFM FDPs was statistically significant for all grades of chippings (P = .001), as well as for chipping grade 3 (P = .02). If all grades of veneer chippings were taken into account, the survival of PFM FDPs was 97%, while the survival rate of the zirconia FDPs was 90% after 3 years for a typical study. For both PFM and zirconia FDPs, the frequency of grades 1 and 2 veneer chippings was considerably higher than grade 3. Veneer chipping was significantly less frequent in pressed materials than in hand-layered materials, both for zirconia and PFM FDPs (P = .04). Conclusions: Since the frequency of veneer chipping was significantly higher in the zirconia FDPs than PFM FDPs, and as refined processing procedures have started to yield better results in the laboratory, new clinical studies with these new procedures must confirm whether the frequency of veneer chipping can be reduced to the level of PFM. Int J Prosthodont 2010;23:493-502

Betaiinin tuotannon sivujakeiden mikrosuodattaminen teräskeraamisella kalvolla

Betaiini on ammoniumyhdiste, jota käytetään esimerkiksi eläinten rehussa, kosmetiikassa ja lääkkeissä. Danisco Animal Nutrition Finnfeeds Finland Oy:n Naantalin tehdas on maailman johtava betaiinin tuottaja ja raaka-aineena tehtaalla käytetään melassierotuksesta saatavaa betaiinimelassia. Kiteisen betaiinin puhdistusprosessin yhteydessä syntyybetaiinipitoisia sivujakeita, jotka sisältävät huomattavan määrän betaiinia, minkä takia niiden jatkokäsittely on tärkeää. Betaiinin tuotannon sivujakeet ovat erittäin vaikeasti suodattuvia orgaanisia liuoksia, joiden koostumuksia ei täysin tunneta. Tämän työn tarkoituksena oli puhdistaa betaiinin tuotannon sivujakeita mikrosuodattamalla niitä teräskeraamisella kalvolla. Työn kokeellisessa osassa suoritettiin suodatusparametrien eli pH:n, lämpötilan, TMP:n ja betaiiniliuoksen kuiva-ainepitoisuuden optimointi sekä konsentrointikokeita. Mikrosuodatus suoritettiin Graver Technologiesin Scepter-putkimoduulilla, joka toimi ohivirtausperiaatteella ja jonka huokoskoko oli 0,1 ¿m. Scepter-moduuli koostui ruostumattomasta teräksestä sintratuista putkimoduuleista, joissa erottavana kerroksena toimi TiO2. Esikokeiden perusteella todettiin ettei pH:lla ollut suurta vaikutusta suodatukseen. Permeaattivuo kasvoi selvästi lämpötilan ja TMP:nkasvaessa. Vuo taas huononi ja permeaatin sameus lisääntyi selvästi 35 % korkeammissa kuiva-ainepitoisuuksissa. Konsentrointikokeet suoritettiin betaiiniliuoksen refraktrometrisessa kuiva-ainepitoisuudessa, BetRk, 35 %, 80 °C lämpötilassa ja betaiiniliuoksen omassa pH:ssa (pH 8-9,5). Esikokeiden tulosten perusteella konsentrointikokeet suoritettiin TMP:ssa 0,6; 0,8 ja 1,0 bar. Betaiinin tuotannonsivujakeiden konsentrointikokeissa saannoksi saatiin 95 %. Suodatustuloksista havaittiin, että betaiinin tuotannon sivujakeen erä vaikutti voimakkaasti suodatuksen toimivuuteen. Konsentrointikokeissa suodatukset suoritettiin sekäuusilla mikrosuodatusmoduuleilla että vanhalla moduulilla, joka oli jo kulunut.Kulumisen ei kuitenkaan havaittu huonontavan suodatustehokkuutta. Konsentrointikokeiden perusteella voidaan laitteiston pesuväliksi arvioida noin viikko ja pesu tulisi suorittaa sekä emäksisellä että happamalla pesuaineella.