Enhanced multi-wavelength holographic profilometry by laser mode selection

The application of multi-wavelength holography for surface shape measurement is presented. In our holographic setup a Bi12TiO 20 (BTO) photorefractive crystal was the holographic recording medium and a multimode diode laser emitting in the red region was the light source in a two-wave mixing scheme. The holographic imaging with multimode lasers results in multiple holograms in the BTO. By employing such lasers the resulting holographic image appears covered of interference fringes corresponding to the object relief and the interferogram spatial frequency is proportional to the diode laser free spectral range (FSR). We used a Fabry-Perot étalon at the laser output for laser mode selection. Thus, larger effective values of the laser FSR were achieved, leading to higher-spatial frequency interferograms and therefore to more sensitive and accurate measurements. The quantitative evaluation of the interferograms was performed through the phase stepping technique (PST) and the phase map unwrapping was carried out through the Cellular-Automata method. For a given surface, shape measurements with different interferogram spatial frequencies were performed and compared, concerning measurement noise and visual inspection.

Scientific article in vitro evaluation of the influence of air abrasion on detection of occlusal caries lesions in primary teeth

The purpose of this study was to assess the influence of cleaning pits and fissures with an aluminum oxide air abrasion system on the detection of occlusal caries in primary teeth using laser fluorescence (LF) and visual examination. Methods: The sample comprised 65 pit and fissure sites on extracted primary teeth suspected to be carious. The sites were submitted to 2 visual examinations (examiner JAR) and 2 LF readings (examiner TMV). Next, the occlusal surfaces were air-abraded and re-examined thereafter using both methods. The teeth were sectioned, and the histological analysis of the sites with a stereoscopic magnifying lens at X32 magnifi cation was used as the gold standard. Results: Cohen's kappa statistic for LF and visual examination were, respectively, 0.282/0.884 before and 0.896/0.905 after air abrasion. LF showed a sensitivity of 0.28 increasing to 0.49 and a specifi city of 0.50 increasing to 0.92. Visual examination showed sensitivity of 0.78 and specifi city of 0.73. Both increased after air abrasion. Conclusion: The findings suggest that cleaning pits and fissures with aluminum oxide air abrasion increased the accuracy of LF and visual examination for detection of occlusal caries in primary teeth.

Optimization of satellite constellations in the moon

Nowadays, we return to live a period of lunar exploration. China, Japan and India heavily invest in missions to the moon, and then try to implement manned bases on this satellite. These bases must be installed in polar regions due to the apparent existence of water. Therefore, the study of the feasibility of satellite constellations for navigation, control and communication recovers importance. The Moon's gravitational potential and resonant movements due to the proximity to Earth as the Kozai-Lidov resonance, must be considered in addition to other perturbations of lesser magnitude. The usual satellite constellations provide, as a basic feature, continuous and global coverage of the Earth. With this goal, they are designed for the smallest number of objects possible to perform a specific task and this amount is directly related to the altitude of the orbits and visual abilities of the members of the constellation. However the problem is different when the area to be covered is reduced to a given zone. The required number of space objects can be reduced. Furthermore, depending on the mission requirements it may be not necessary to provide continuous coverage. Taking into account the possibility of setting up a constellation that covers a specific region of the Moon on a non-continuous base, in this study we seek a criterion of optimization related to the time between visits. The propagation of the orbits of objects in the constellation in conjunction with the coverage constraints, provide information on the periods of time in which points of the surface are covered by a satellite, and time intervals in which they are not. So we minimize the time between visits considering several sets of possible constellations and using genetic algorithms.

Dentistry for babies: Caries experience vs. Assiduity in clinical care

Aim: This study analyzed and compared the experience of dental caries in 300 children aged 0 to 48 months, who were participants and non-participants of a preventive program 'Dentistry for babies', as well as the correlation between assiduity of dental visits and experience of dental caries. Methods: The subjects were randomly selected and divided into two groups: G1 'Non participant children of the Program' (n=100) and G2 'Participant Children of the Program' (n=200). Each group was subdivided in two subgroups: 0-24 months and 25-48 months. The collected data from G2 were analyzed, relating the variation of the dmft index (dmft refers to primary teeth: d = decayed, m = missing/extracted due to caries, f = filled, t = teeth) (C) and dental caries prevalence (P) with the influence of assiduity factor in each subgroup. To collect data, clinical examinations were performed using tactile and visual criteria by a single calibrated examiner. The data were statistically analyzed using the 'paired t-test', 'Mann-Whitney' and 'Chi-Squared' tests (p<0.05). Results: It was found that prevalence and dmft index were statistically significant (P=0.0001) with the greatest values observed in G1 (p=0.0001). The values were: PG1 (73%), PG2 (22%), CG1 (3.45±3.84), CG2 (0.66±1.57). Assiduity was significant in G2 (p=0.0001). The values observed were: P-Assiduous (2%), P-Non-assiduous (42%), C-Assiduous (0.04±0.31), and C-Non-assiduous (1.29±2.01). Conclusions: The participation in the program had a positive influence on the oral health of babies. Complete assiduity to the program resulted in the lowest rates and prevalence of dental caries.

Sobre a analgesia pós-operatória da morfina, cetamina ou da associação em cadelas submetidas à ovariossalpingohisterectomia eletiva

This study aimed to evaluate the post operative analgesic effects of morphine or ketamine alone or their combination in 24 healthy bitches, weighing 11.01±8.69kg and aging 27±17 months, submitted to elective ovariohysterectomy. The animals were distributed to one of the three treatments after the anaesthetic induction: morphine (GM, n=8, 0.5mg kg-1 IM), ketamine (GK, n=8, 2.5mg kg-1 IM) or ketamine combined to morphine (GKM) using the same doses previously described. Sedation score and pain assessment were performed blindly two hours before surgery and at 1, 2, 4, 8, 12, and 24 hours after extubation, using the Dobbins scale (sedation) and visual analogue scale (pain) and Glasgow modified pain scale (GMPS). Rescue analgesia was performed with 1.0mg kg-1 of morphine and if not sufficient, followed by 0.2mg kg-1 of meloxicam, both IM, when the GMPS reached above 33% of the total score. Non parametric data were analyzed using Friedmańs test followed by Dunńs test for differences in time. Kruskal-Walliś test followed by Dunńs test were used to investigate differences in the number of analgesic rescues and among groups at each time. Parametric data were evaluated by ANOVA followed by Tukey's test (P<0.05). Except for GMPS, where the values of GM were greater than for GKM at 1h post-extubation, there were no other differences among groups. The number of rescue analgesia was greater in GM (11 in total; twice in 3 animals,) when compared to GKM (3; twice in 1 animal) and GK (2; twice in 1 animal). Analgesia provided by pre-incisional ketamine was more effective when compared to morphine. According to that, ketamine alone may be used as a preemptive analgesic in bitches undergoing ovariohysterectomy; however, rescue analgesia may be necessary.

A rank aggregation framework for video multimodal geocoding

This paper proposes a rank aggregation framework for video multimodal geocoding. Textual and visual descriptions associated with videos are used to define ranked lists. These ranked lists are later combined, and the resulting ranked list is used to define appropriate locations for videos. An architecture that implements the proposed framework is designed. In this architecture, there are specific modules for each modality (e.g, textual and visual) that can be developed and evolved independently. Another component is a data fusion module responsible for combining seamlessly the ranked lists defined for each modality. We have validated the proposed framework in the context of the MediaEval 2012 Placing Task, whose objective is to automatically assign geographical coordinates to videos. Obtained results show how our multimodal approach improves the geocoding results when compared to methods that rely on a single modality (either textual or visual descriptors). We also show that the proposed multimodal approach yields comparable results to the best submissions to the Placing Task in 2012 using no extra information besides the available development/training data. Another contribution of this work is related to the proposal of a new effectiveness evaluation measure. The proposed measure is based on distance scores that summarize how effective a designed/tested approach is, considering its overall result for a test dataset. © 2013 Springer Science+Business Media New York.

Características anatômicas foliares e controle químico em pós-emergência de Brachiaria decumbens e Brachiaria plantaginea

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Generalização cartográfica para um Sistema de Navegação e Guia de Rota em Automóvel áudio-dinâmico com múltiplas escalas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A criança, a dança e a sociabilidade na escola

Pós-graduação em Artes - IA

Anna dos 6 aos 18 anos

Pós-graduação em Artes - IA

Expressando-se: uma interface do ensino de artes visuais com a musicalidade

Pós-graduação em Artes - IA

Entre Portugal e São Paulo: um percurso artístico em construção

Pós-graduação em Artes - IA

Educação em engenharia: estudo de metodologias pedagógicas e desenvolvimento de um software aplicado ao ensino de estabilidade de sistemas de energia elétrica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo do sinal eletromiográfico em exercícios isométricos em diferentes velocidades de contração

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A ancoragem funcional através do manejo de cão em tarefas de equilíbrio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)