New temperature fluctuation method for direct determination of thermal activation energy of deep levels in semiconductors

A new method is suggested where the thermal activation energy is measured directly and not as a slope of an Arrhenius plot. The sample temperature T is allowed to fluctuate about a temperature T0. The reverse-biased sample diode is repeatedly pulsed towards zero bias and the transient capacitance C1 at time t1 is measured The activation energy is obtained by monitoring the fluctuations in C1 and T. The method has been used to measure the activation energy of the gold acceptor level in silicon.

A subculture of mental toughness in an Australian Football League club

Objective The current study aimed to provide a subcultural analysis of mental toughness in a high-performance context in sport. Design Using Schein's (1990) framework of organisational culture, an exploratory qualitative analysis, employing focus group and individual interviews, was used to investigate mental toughness in an Australian Football League club. Method Nine senior coaches and players participated in focus group and individual interviews. Photo elicitation was used as a method to capture mental toughness through the identification of prominent club artefacts. Participants were considered to have significant subcultural knowledge of their football club and were willing to describe personal experiences and perceptions of mental toughness through this cultural lens. Deductive and inductive analyses were conducted to capture the core themes of mental toughness across the disparate levels of Schein's organisational framework. Results Mental toughness was found to be a socially derived term marked by unrelenting standards and sacrificial displays. These acts were underpinned by subcultural values emphasising a desire for constant improvement, a team first ethos, relentless effort, and the maintenance of an infallible image. At its core, mental toughness was assumed to be an internal concept, epitomised an idealised form of masculinity, elitist values, and was rhetorically depicted through metaphors of war. Conclusions It may be difficult to understand mental toughness without giving attention to the contextual norms related to the term. Appreciating how people promote, instil, and internalise prized ideals coveted as mental toughness could be intriguing for future research in sport psychology.

The Past is the Past? The Impossibility of Erasure of Historical LGBTIQ Policing

This paper considers the impossibility of erasing historical policing of LGBTIQ people. Significant events of LGBTIQ policing may appear to fade into the past and we perhaps assume they literally disappear – not discussed, not thought about, and erased from cultural memory. At times we see evidence of an almost nostalgic contemplation about LGBTIQ policing of the past embedded in the notion that we have moved beyond that point to the future, never to return to those histories. If we draw on the work of Foucault, an impossibility becomes apparent. Foucault suggests that discursive traces circulate in discourse and they emerge and re-emerge to shape future discourses. This paper ruminates on a case example, particularly the policing of the Gay and Lesbian Mardi Gras in Sydney, Australia, in 2013. We argue this case demonstrates Foucault’s understanding of discursive history in action: it shows how the remnant traces of historical LGBTIQ policing can re-emerge to profoundly shape LGBTIQ-police relations in the present. In addition to the case, we draw on qualitative data showing how ideas about historical LGBTIQ policing are rehearsed in a consistent cycle of iteration and reiteration through the musings of research participants across three different projects on LGBTIQ policing. We conclude therefore that LGBTIQ policing in the past may never be erased because moments reminiscent of historical LGBTIQ policing are always already circulating and undermining the governmental work of policing organisations in the present.

Graphical method to include temperature variation of activation energy in Hall data analysis

A graphical method is presented for Hall data analysis, including the temperature variation of activation energy due to screening. This method removes the discrepancies noted in the analysis of recently reported Hall data on Si(In).

An absolute method for the determination of surface tension of liquids using pendent drop profiles

Drop formation at conical tips which is of relevance to metallurgists is investigated based on the principle of minimization of free energy using the variational approach. The dimensionless governing equations for drop profiles are computer solved using the fourth order Runge-Kutta method. For different cone angles, the theoretical plots of XT and ZT vs their ratio, are statistically analyzed, where XT and ZT are the dimensionless x and z coordinates of the drop profile at a plane at the conical tip, perpendicular to the axis of symmetry. Based on the mathematical description of these curves, an absolute method has been proposed for the determination of surface tension of liquids, which is shown to be preferable in comparison with the earlier pendent-drop profile methods.

Modelling the impact of traffic incidents on travel time reliability

Traffic incidents are recognised as one of the key sources of non-recurrent congestion that often leads to reduction in travel time reliability (TTR), a key metric of roadway performance. A method is proposed here to quantify the impacts of traffic incidents on TTR on freeways. The method uses historical data to establish recurrent speed profiles and identifies non-recurrent congestion based on their negative impacts on speeds. The locations and times of incidents are used to identify incidents among non-recurrent congestion events. Buffer time is employed to measure TTR. Extra buffer time is defined as the extra delay caused by traffic incidents. This reliability measure indicates how much extra travel time is required by travellers to arrive at their destination on time with 95% certainty in the case of an incident, over and above the travel time that would have been required under recurrent conditions. An extra buffer time index (EBTI) is defined as the ratio of extra buffer time to recurrent travel time, with zero being the best case (no delay). A Tobit model is used to identify and quantify factors that affect EBTI using a selected freeway segment in the Southeast Queensland, Australia network. Both fixed and random parameter Tobit specifications are tested. The estimation results reveal that models with random parameters offer a superior statistical fit for all types of incidents, suggesting the presence of unobserved heterogeneity across segments. What factors influence EBTI depends on the type of incident. In addition, changes in TTR as a result of traffic incidents are related to the characteristics of the incidents (multiple vehicles involved, incident duration, major incidents, etc.) and traffic characteristics.

Ranskan rooli ja asema läntisessä liittoutumassa neljännen ja viidennen tasavallan vaihtumakohdassa 1956-1958

The study discusses the position of France as the United States’ ally in NATO in 1956-1958. The concrete position of France and the role that it was envisioned to have are being treated from the point of view of three participants of the Cold War: France, the United States and the Soviet Union. How did these different parties perceive the question and did these views change when the French Fourth Republic turned into the Fifth in 1958? The study is based on published French and American documents of Foreign Affairs. Because of problems with accessibility to the Soviet archival sources, the study uses reports on France-NATO relations of Pravda newspaper, the official organ of the Communist Party of the USSR, to provide information about how the Soviet side saw the question. Due to the nature and use of source material, and the chronological structure of the work, the study belongs methodologically to the research field of History of International Relations. As distinct from political scientists’ field of research, more prone to theorize, the study is characteristically a historical research, a work based on qualitative method and original sources that aims at creating a coherent narrative of the views expressed during the period covered by the study. France’s road to a full membership of NATO is being treated on the basis of research literature, after which discussions about France’s position in the Western Alliance are being chronologically traced for the period of last years of the Fourth Republic and the immediate months of coming back to power of Charles de Gaulle. Right from the spring of 1956 there can be seen aspirations of France, on one hand, to maintain her freedom of action inside the Western Alliance and, on the other, to widen the dialogue between the allies. The decision on France’s own nuclear deterrent was made already during the Fourth Republic, when it was thought to become part of NATO’s common defence. This was to change with de Gaulle. The USA felt that France still fancied herself as a great power and that she could not participate in full in NATO’s common defence because of her colonies. The Soviet Union saw the concrete position of France in the Alliance as in complete dependence on the USA, but her desired role was expressed largely in “Gaullist” terms. The expressions used by the General and the Soviet propaganda were close to each other, but the Soviet Union could not support de Gaulle without endangering the position of the French Communist Party. Between the Fourth and Fifth Republics no great rupture in content took place concerning the views of France’s role and position in the Western Alliance. The questions posed by de Gaulle had been expressed during the whole period of Fourth Republic’s existence. Instead, along with the General the weight and rhetoric of these questions saw a great change. Already in the early phase the Americans saw it possible that with de Gaulle, France would try to change her role. The rupture took place in the form of expression, rather than in its content.

Arkeologia, historialliset kartat ja paikkatieto

This licentiate thesis is composed of three parts, of which the parts 2 and 3 have been published elsewhere. Part 1 deals with the research history of large-scaled historical maps in Finland. The research done in four disciplines – archaeology, history, art history and geography – is summarized. Compared to the other disciplines, archaeology is characterized by its deep engagement with the location. Because archaeology studies different aspects of the past through material culture, it is the only discipline in which the concrete remains portrayed on the maps are “dug up”. For the archaeologist, historical maps are not merely historical documents with written information and drawings in scale, but actual maps which can be connected with the physical features they were made to illustrate in the first place. This aspect of historical maps is discussed in the work by looking at the early (17th and 18th century) urban cartographic material of two Finnish towns, Savonlinna and Vehkalahti-Hamina. In both cases, the GIS-based relocating of the historical maps highlights new aspects in the early development of the towns. Part 1 ends with a section in which the contents of the entire licentiate thesis are summarized. Part 2 is a peer reviewed article published in English. This article deals with the role of historical maps converted into GIS in archaeological surveys made in Finnish post-medieval towns (16th and 17th centuries). It is based on the surveys made by the author between 2000 and 2003 and introduces a new method for the archaeological surveying of post-medieval towns with wooden houses. The role of archaeology in the sphere of urban research is discussed. The article emphasizes that the methods used in studying the development of southern European towns with stone houses cannot be adequately applied to the wooden towns of the north. Part 3 is a monograph written in Finnish. It discusses large-scaled historical maps and the methods for producing digital spatial information based on historical maps. Since the late 1990’s, archaeological research in Finland has been increasingly directed towards the historical period. As a result, historical cartography has emerged as one of the central sources of information for the archaeologist, too. The main theme of this work is the need for using historical maps as real maps which, surprisingly, has been uncommon in the historical sciences. Projecting historical maps to the very place they were made to illustrate is essential to understanding the maps. This is self-evident for the archaeologist, who is accustomed to studying the material past, but less so to researchers in other historical disciplines that concentrate on written and visual sources of information. With the help of GIS, the historical maps can be concretely linked to the places they were originally made to illustrate. In doing so, and equipped with a cartographic comprehension, new observations can be made and questions asked, which supplement and occasionally challenge the prevailing views.

Passion vallassa : Hermostunut aika Minna Canthin teoksissa

Under the power of passion. The age of nervousness in Minna Canth s works This research contemplates the psychology of Minna Canth s characters through the historical image of man in late 19th century Europe. The central operative term of the study is passion , understood as a twofold philosophical concept that includes both desire and suffering. The method of this study is historical and contextual. The study interprets the passions and the psychology of Canth s characters as they were understood in their own time. The indicator of the relevant contexts is the realist and naturalist genre of Canth s works. New research on the genre of the time is also the basis of a new kind of psychological approach to Canth s works. The most important context of passion in Canth s works is the positivistic and pathological image of man at the end of the 19th century. Then, passion was widely discussed, and was perceived as a physiological phenomenon that influenced humans neurologically and caused different kinds of physiological symptoms and nervous disorders. But at the same time, passion was understood as a manifestation of human instincts and drives. The naturalistic literature of the day aimed at creating deterministic studies of human morality and psychology following Émile Zola s application of experimental science methods in his writing. The pathological image of man is most explicitly manifested in Canth s formerly unknown short story Lääkäri (Doctor, 1891), in which a doctor who is interested in psychology visits a jail to meet a peculiar criminal, a girl who feels no remorse for her multiple crimes. In other works of Canth the medically motivated viewpoint is more hidden in the deterministic narrative and depiction of the characters. The present study approaches the passion in Minna Canth s works through five thematic chapters, in witch characters are interpreted suffering from blind love, ennui, crippling romantic idealism, melancholy, guilt and nostalgia, and their stories can be prescribed as medical histories which depict the born of the passion and its development towards ruin. All protagonists are also manifestations of their own time. Canth criticises the modern life and its demands as well as social defects through the tragic stories of individuals. The study demonstrates that Canth did not, like previous research has suggested, wait until the 1890s before writing works of a psychological nature but had already written according to the psychological paradigm of her time in Työmiehen vaimo (1885). The social and psychological interests intertwine in Canth s works and are not exclusionary as has formerly been interpreted. Canth is also critical of the medical power implicit in the naturalist experimental method and this shows itself especially in her depiction of working class women.

An evaluation of the apxIVA based PCR-REA method for differentiation of Actinobacillus pleuropneumoniae

A restriction analysis of PCR (PCR-REA) amplified apxIVA gene has been suggested as an alternative method for serotyping of Actinobacillus pleuropneumoniae by Jaglic et al. [Jaglic, Z., Svastova, P., Rychlik, I., Nedbalcova, K., Kucerova, Z., Pavlik, I., Bartos, M., 2004. Differentiation of Actinobacillus pleuropneumoniae by PCR-REA based on sequence variability of the apxIVA gene and by ribotyping. Vet. Microbiol. 103, 63-69]. The current study investigated whether this alternative method could distinguish between the reference strains of serovars 13-15 and the value of the method when applied to 47 field isolates representing serovars 1-3, 5, 7-9, 12 and 15 as well as non-typable isolates. The reference strains of serovars 13 and 14 had the same sized product after the apxIVA PCR, while the product for serovar 15 was of different size compared to all the other serovar reference strains. The CfoI digest profiles of the reference serovars 13 and 14 strains were different from each other and from all other serovars. The HpaII digest profiles of these two serovars were very similar to each other, but both were distinctively different from the other serovar profiles. The CfoI digest profile of serovar 15 strain was very similar to the serovars 3 and 12 strains except for two faint extra bands for serovar 15. The HpaII digest profiles of serovars 12 and 15 reference strains were identical. The PCR-REA method correctly recognized the serovar of 21 of 43 field isolates. It was concluded that the method was a useful additional tool to support, but could not replace, conventional serotyping.

Modeling growth of hydrogen bubbles in aluminum castings using the level-set method

A new approach is proposed to solve for the growth as well as the movement of hydrogen bubbles during solidification in aluminum castings. A level-set methodology has been adopted to handle this multiphase phenomenon. A microscale domain is considered and the growth and movement of hydrogen bubbles in this domain has been studied. The growth characteristics of hydrogen bubbles have been evaluated under free growth conditions in a melt having a hydrogen input caused b solidification occurring around the microdomain.

Temporal variation in arthropod sampling effectiveness: The case for using the beat sheet method in cotton

Predatory insects and spiders are key elements of integrated pest management (IPM) programmes in agricultural crops such as cotton. Management decisions in IPM programmes should to be based on a reliable and efficient method for counting both predators and pests. Knowledge of the temporal constraints that influence sampling is required because arthropod abundance estimates are likely to vary over a growing season and within a day. Few studies have adequately quantified this effect using the beat sheet, a potentially important sampling method. We compared the commonly used methods of suction and visual sampling to the beat sheet, with reference to an absolute cage clamp method for determining the abundance of various arthropod taxa over 5 weeks. There were significantly more entomophagous arthropods recorded using the beat sheet and cage clamp methods than by using suction or visual sampling, and these differences were more pronounced as the plants grew. In a second trial, relative estimates of entomophagous and phytophagous arthropod abundance were made using beat sheet samples collected over a day. Beat sheet estimates of the abundance of only eight of the 43 taxa examined were found to vary significantly over a day. Beat sheet sampling is recommended in further studies of arthropod abundance in cotton, but researchers and pest management advisors should bear in mind the time of season and time of day effects.

Heavy haul sleeper design: A rational cost-saving method

Heavy haul railway lines are important and expensive items of infrastructure operating in an environment which is increasingly focussed on risk-based management and constrained profit margins. It is vital that costs are minimised but also that infrastructure satisfies failure criteria and standards of reliability which account for the random nature of wheel-rail forces and of the properties of the materials in the track. In Australia and the USA, concrete railway sleepers/ties are still designed using methods which the rest of the civil engineering world discarded decades ago in favour of the more rational, more economical and probabilistically based, limit states design (LSD) concept. This paper describes a LSD method for concrete sleepers which is based on (a) billions of measurements over many years of the real, random wheel-rail forces on heavy haul lines, and (b) the true capacity of sleepers. The essential principles on which the new method is based are similar to current, widely used LSD-based standards for concrete structures. The paper proposes and describes four limit states which a sleeper must satisfy, namely: strength; operations; serviceability; and fatigue. The method has been applied commercially to two new major heavy haul lines in Australia, where it has saved clients millions of dollars in capital expenditure.

Seismic reliability assessment of external stability of reinforced soil walls using pseudo-dynamic method

The paper presents a method for the evaluation of external stability of reinforced soil walls subjected to earthquakes in the framework of the pseudo-dynamic method. The seismic reliability of the wall is evaluated by considering the different possible failure modes such as sliding along the base, overturning about the toe point of the wall, bearing capacity and the eccentricity of the resultant force. The analysis is performed considering properties of the reinforced backfill, foundation soil below the base of the wall, length of the geosynthetic reinforcement and characteristics of earthquake ground motions such as shear wave and primary wave velocity as random variables. The optimum length of reinforcement needed to maintain stability against four modes of failure by targeting various component reliability indices is obtained. Differences between pseudo-static and pseudo-dynamic methods are clearly highlighted in the paper. A complete analysis of pseudo-static and pseudo-dynamic methodologies shows that the pseudodynamic method results in realistic design values for the length of geosynthetic reinforcement under earthquake conditions.