Embedded Storytelling and Gender Negotiations in Githa Hariharan's First Three Novels

This thesis treats Githa Hariharan s first three novels The Thousand Faces of Night (1992), The Ghosts of Vasu Master (1994) and When Dreams Travel (1999) as a trilogy, in which Hariharan studies the effects of storytelling from different perspectives. The thesis examines the relationship between embedded storytelling and the primary narrative level, the impact of character-bound storytelling on personal development and interpersonal relationships. Thus, I assume that an analysis of the instabilities between characters, and tensions between sets of values introduced through storytelling displays the development of the central characters in the novels. My focus is on the tensions between different sets of values and knowledge systems and their impact on the gender negotiations. The tensions are articulated through a resistance and/or adherence to a cultural narrative, that is, a formula, which underlies specific narratives. Conveyed or disputed by embedded storytelling, the cultural narrative circumscribes what it means to be gendered in Hariharan s novels. The analysis centres on how the narratee in The Thousand Faces of Night and the storyteller in The Ghosts of Vasu Master relate to and are affected by the storytelling, and how they perceive their gendered positions. The analysis of the third novel When Dreams Travel focuses on storytelling, and its relationship to power and representation. I argue that Hariharan's use of embedded storytelling is a way to renegotiate and even reconceptualise gender. Hariharan s primary concern in all three novels is the tensions between tradition or repetition, and change, and how they affect gender. Although the novels feature ancient mythical heroes, mice and flies, or are set in a fantasy world of jinnis and ghouls, they are, I argue, deeply concerned with contemporary issues. Whereas the first novel questions the demands set by family and society on the individual, the second strives to articulate an ethical relationship between the self and the other. The third novel examines the relationship between representation and power. These issues could not be more contemporary, and they loom large over both the regional and global arenas.

Dietary aspects of cow's milk allergy in young children

Cow s milk allergy (CMA) affects about 2-6% of infants and young children. Environmental factors during early life are suggested to play a role in the development of allergic diseases. One of these factors is likely to be maternal diet during pregnancy and lactation. The association between maternal diet and development of CMA in offspring is not well known, but diet could contain factors that facilitate development of tolerance. After an established food allergy, another issue is gaining tolerance towards an antigen that causes symptoms. The strictness of the elimination depends on the individual level of tolerance. This study aimed at validating a questionnaire used to inquire about food allergies in children, at researching associations between maternal diet during pregnancy and lactation and subsequent development of cow s milk allergy in the offspring, and at evaluating the degree of adherence to a therapeutic elimination diet of children with CMA and factors associated with the adherence and age of recovery. These research questions were addressed in a prospective birth cohort born between 1997 and 2004 at the Tampere and Oulu University Hospitals. Altogether 6753 children of the Diabetes Prediction and Prevention (DIPP) Nutrition cohort were investigated. Questionnaires regarding allergic diseases are often used in studies without validation. High-quality valid tools are therefore needed. Two validation studies were conducted here: one by comparing parentally reported food allergies with information gathered from patient records of 1122 children, and the other one by comparing parentally reported CMA with information in the reimbursement records of special infant formulae in the registers of the Social Insurance Institution for 6753 children. Both of these studies showed that the questionnaire works well and is a valid tool for measuring food allergies in children. In the first validation study, Cohen s kappa values were within 0.71-0.88 for CMA, 0.74-0.82 for cereal allergy, and 0.66-0.86 for any reported food allergy. In the second validation study, the kappa value was 0.79, sensitivity 0.958, and specificity 0.965 for reported and diagnosed CMA. To investigate the associations between maternal diet during pregnancy and lactation and CMA in offspring, 6288 children were studied. Maternal diet during pregnancy (8th month) and lactation (3rd month) was assessed by a validated, 181-item semi-quantitative food frequency questionnaire (FFQ), and as an endpoint register-based information on diagnosed CMA was obtained from the Social Insurance Institution and complemented with parental reports of CMA in their children. The associations between maternal food consumption and CMA in offspring were analyzed by logistic regression comparing the highest and lowest quarters with two middle quarters of consumption and adjusted for several potential confounding factors. High maternal intake of milk products (OR 0.56, 95% CI 0.37-0.86 p = 0.002) was associated with a lower risk of CMA in offspring. When stratified according to maternal allergic rhinitis or asthma, a protective association of high use of milk products with CMA was seen in children of allergy-free mothers (OR 0.30, 95% CI 0.13 - 0.69, p < 0.001), but not in children of allergic mothers. Moreover, low maternal consumption of fish during pregnancy was associated with a higher risk of CMA in children of mothers with allergic rhinitis or asthma (OR 1.47, 95% CI 0.96 - 2.27 for the lowest quarter, p = 0.043). In children of nonallergic mothers, this association was not seen. Maternal diet during lactation was not associated with CMA in offspring, apart from an inverse association between citrus and kiwi fruit consumption and CMA. These results imply that maternal diet during pregnancy may contain factors protective against CMA in offspring, more so than maternal diet during lactation. These results need to be confirmed in other studies before giving recommendations to the public. To evaluate the degree of adherence to a therapeutic elimination diet in children with diagnosed CMA, food records of 267 children were studied. Subsequent food records were examined to assess the age at reintroduction of milk products to the child s diet. Nine of ten families adhered to the elimination diet of the child with extreme accuracy. Older and monosensitized children had more often small amounts of cow s milk protein in their diet (p < 0.001 for both). Adherence to the diet was not related to any other sociodemographic factor studied or to the age at reintroduction of milk products to the diet. Low intakes of vitamin D, calcium, and riboflavin are of concern in children following a cow s milk-free diet. In summary, we found that the questionnaires used in the DIPP study are valid in investigating CMA in young children; that there are associations between maternal diet during pregnancy and lactation and the development of CMA in offspring; and that the therapeutic elimination diet in children with diagnosed CMA is rigorously adhered to.

Rätt som argument : Leo Mechelin och finska frågan 1886-1912

Right as an Argument. Leo Mechelin and the Finnish Question 1886-1912 At the turn of the 20th century the Finnish Question rose up as a political and juridical issue at the international arena. The vaguely précised position of Finland in the Russian empire led to diverse conclusions concerning the correctness of the February manifesto of 1899. It was predominantly among a European elite of politicians, cultural workers and academics the issue rose some interest. Finns were active making propaganda for their cause, and they put an emphasis on the claim that the right was on the Finnish side. In the study Elisabeth Stubb compare the Finnish, Russian and European statements about the Finnish Question and analyse their use of right as an argument. The Finnish Question offers at the same time a case study of a national entity which possesses a political sphere of life but is not fully independent, and its possibilities to drive its interests in an international context. Leo Mechelin (1839-1914), the leader of the Finnish propaganda organization abroad, is used as a point of departure. The biographical stance is formed into a triangle, where Leo Mechelin, the idea of right and the Finnish Question abroad are the three cornerstones. The treatment of one cornerstone sheds a ligth on the two others. The metaphor of triangulation also worked as a method to reach "a third stance" in a scinetific and political issue that usually is polarised into two opposite alternatives. An adherence to a strict legal right could not in the end offer a complete, unquestionable and satisfactory solution to the Finnsih Question, it was dependent on "the right of state wisdom and sound insight". The Finnish propaganda abroad used almost completely alternative ways of making politics. The propaganda did not have a decisive effect on countries' official politics, but gained unofficial support, especially in the public opinion and in academic statements. Mechelin claimed that the political field was dependent on public opinion and scientific research. Together with the official politics these two fields formed a triangle that shared the task of balancing the political arena and preventing it from making unwise decisions of taking an unjust turn. The international sphere worked as a balancing part in the Finnish Question. Mechelin tried by claiming the status of state for Finland's part to secure the country a place at the official international arena. At the same time, and especially when the claim was not fully adopted, he emphasised, and in a European context worked for, that right would become the guiding light not only for international relations, but also for the policy making in the inner life of the state.

Helsingin kävelykeskustan suunnittelu ydinkeskustan kadunvarsiliikeyrittäjien näkökulmasta

Aiempien tutkimusten mukaan keskustayrittäjien kielteinen asenne on olennaisesti vaikeuttanut kävelykatujen toteuttamista kaupunkikeskustoissa. Yrittäjät pelkäävät ostokykyisten asiakkaiden kaikkoavan ja liikevaihtonsa pienenevän kävelykeskustauudistusten myötä. Yrittäjien kielteiset asenteet ovat usein myös painottuneet suuriin kaupunkeihin. Etenkin ydinkeskustassa sijaitsevat kadunvarsiliikeyrittäjät ovat kokeneet kävelykadut ongelmiksi. Tämän tutkimuksen tavoitteena on selvittää, mikä on ydinkeskustan kadunvarsiliikeyrittäjien näkemys Helsingin kävelykeskustan suunnittelusta, millaisena ydinkeskustan kadunvarsiliikeyrittäjät näkevät sijaintikatunsa kävelykeskustan suunnittelupäämäärien kautta tarkasteltuna, ja onko kävelykatuyrittäjien ja kävelykatujen ulkopuolella sijaitsevien yrittäjien näkemysten välillä eroja. Taustana tälle tarkastellaan Helsingin kävelykeskustaa pohjoismaisessa kontekstissa, ja käydään läpi Helsingin kävelykeskustan suunnittelun ja rakentumisen historiaa ja päämääriä. Tutkimuksen aineisto koostuu Helsingin ydinkeskustan kadunvarsiliikeyrittäjille tehdystä kyselystä, kävelykeskustoihin liittyvistä tutkimuksista ja selvityksistä, kaupunkisuunnitteluun ja -tutkimukseen liittyvästä tutkimuskirjallisuudesta, sanomalehtiartikkeleista, ydinkeskustassa tehdystä empiirisestä havainnoinnista ja kahdesta asiantuntijahaastattelusta. Kyselyaineistoa analysoidaan tutkimuksessa tilastollisten menetelmien avulla. Helsingin kävelykeskustan suunnittelu ja rakentuminen on ollut pitkällinen prosessi. Vuoden 1 989 kävelykeskustan periaatesuunnitelmasta on konkretisoitunut Kluuvikatu ja Mikonkatu. Keskustatunnelihanke on vaakalaudalla, minkä vuoksi kävelykeskustan uuden periaatesuunnitelman toteutuminen on epävarmaa. Kävelykeskustan rakentuminen kuitenkin etenee. Keskuskatu ja Kalevankadun itäpää muutetaan kävelykaduiksi ja ydinkeskustan jalankulkuympäristöä parannetaan ja kehitetään jatkuvasti. Tällä hetkellä kävelykeskustan suunnittelun painopiste on Aleksanterinkadun kortteleiden ympäristössä, ja suunnittelun tärkeimpiä päämääriä ovat viihtyisyyden, turvallisuuden, kaupallisen vetovoimaisuuden ja saavutettavuuden parantaminen. Kyselyyn vastanneiden yrittäjien mielestä kävelykeskustaa tulisi laajentaa, sillä laajemman kävelykeskustan nähdään kasvattavan liikevaihtoa ja lisäävän yleisesti ydinkeskustan vetovoimaa. Kävelykatuyrittäjien näkemykset kävelykeskustan suunnittelusta ja kehittämisestä olivat kävelykatujen ulkopuolisia yrittäjiä kielteisempiä. Em. yrittäjien asenteisiin vaikuttavat oletettavasti tutkituilla kävelykaduilla ilmenneet ongelmat. Kyse voi myös olla siitä, että uusien kävelykatujen rakentaminen haittaa kävelykatujen saavutettavuutta. Kadunvarsiliikeyrittäjien yleinen suhtautuminen kävelykeskustan kehittämiseen ja suunnittelupäämääriin on kuitenkin pääosin positiivista. Jatkotutkimuksen kannalta olisi kiinnostavaa selvittää, onko muiden ydinkeskustassa toimivien yritysten, kuten esimerkiksi tavaratalojen ja kauppakeskusten johdon ja kiinteistösijoittajien ja -omistajien suhtautuminen kävelykeskustan kehittämiseen myös positiivista. Tämän lisäksi olisi mielenkiintoista selvittää keskustan käyttäjien ja keskustassa asuvien asenteita kävelykeskustan suunnitteluun, ja verrata tuloksia tässä tutkimuksessa selvitettyihin kadunvarsiliikeyrittäjien näkemyksiin.

Supermacroporous Polymer-Based Cryogel Bioreactor for Monoclonal Antibody Production in Continuous Culture Using Hybridoma Cells

Cryogel matrices composed of different polymeric blends were synthesized, yielding a unique combination of hydrophilicity and hydrophobicity with the presence or absence of charged surface. Four such cryogel matrices composed of polyacrylamide-chitosan (PAAC), poly(N-isopropylacrylamide)-chitosan, polyacrylonitrile (PAN), and poly(N-isopropylacrylamide) were tested for growth of different hybridoma cell lines and production of antibody in static culture. All the matrices were capable for the adherence of hybridoma cell lines 6A4D7, B7B10, and H9E10 to the polymeric surfaces as well as for the efficient monoclonal antibody (mAb) production. PAAC proved to be relatively better in terms of both mAb production and cell growth. Further, PAAC cryogel was designed into three different formats, monolith, disks, and beads, and used as packing material for packed-bed bioreactor. Longterm cultivation of 6A4D7 cell line on PAAC cryogel scaffold in all the three formats could be successfully done for a period of 6 weeks under static conditions. Continuous packed-bed bioreactor was setup using 6A4D7 hybridoma cell line in the three reactor formats. The reactors ran continuously for a period of 60 days during which mAb production and metabolism of cells in the bioreactors were monitored periodically. The monolith bioreactor performed most efficiently over a period of 60 days and produced a total of 57.5 mg of antibody in the first 30 days (in 500 mL) with a highest concentration of 115 mu g mL(-1), which is fourfold higher than t-flask culture. The results demonstrate that appropriate chemistry and geometry of the bioreactor matrix for cell growth and immobilization can enhance the reactor productivity. (C) 2010 American Institute of Chemical Engineers Biotechnol. Prog., 27: 170-180, 2011

Novel signal demodulation technique to estimate the amount of chirp in fiber Bragg gratings

A novel detection technique to estimate the amount of chirp in fiber Bragg gratings (FBGs) is proposed. This method is based on the fact that reflectivity at central wavelength of FBG reflection changes with strain/temperature gradient (linear chirp) applied to the same. Transfer matrix approach was used to vary different grating parameters (length, strength and apodization) to optimize variation of reflectivity with linear chirp. Analysis is done for different sets of `FBG length-refractive index strength' combinations for which reflectivity vary linearly with linear chirp over a decent measurement range. This article acts as a guideline to choose appropriate grating parameters in designing sensing apparatus based on change in reflectivity at central wavelength of FBG reflection.

Al2O3---ZrO2 composite coatings for thermal-barrier applications

Graded alternate layers of Al2O3 and 8% Y2O3-ZrO2 and their admixtures were plasma sprayed onto bond-coated mild steel. They were evaluated for thermal-shock resistance, thermal-barrier characteristics, hot corrosion resistance (molten NaCl corrodant) and depth of attack, adhesion strength and the presence of phases. Although front-back temperature drops of 423-623 K were observed, some of the coatings showed good adherence even after 100 thermal shack cycles. In the sequence of the graded layers, the oxide which is directly in contact with the bond coat appears to influence the properties especially in coatings of 150 and 300 mu m thickness. Molten NaCl readily attacks the films at high hot-face temperatures (1273 K for 1 h) and the adhesive strength falls significantly by 50-60%. Diffusion of alkaline elements is also found to depend on the chemical composition of the outer coating directly facing the molten corrodant. (C) 1997 Elsevier Science Limited.

Effects of surface treatments and size of fly ash particles on the compressive properties of epoxy based particulate composites

Particulate reinforcements for polymers are selected with dual objective of improving composite properties and save on the total cost of the system. In the present study fly ash, an industrial waste with good properties is used as filler in epoxy and the compressive properties of such composites are studied. Particle surfaces are treated chemically using a silane-coupling agent to improve the compatibility with the matrix. The compressive properties of these are compared with those made of untreated fly ash particulates. Furthermore properties of fly ash composites with two different average particle sizes are first compared between themselves and then with those made using the as-received bimodal nature of particle size distribution. Microscopic observations of compression tested samples revealed a better adherence of the particles with the matrix in case of treated particles and regards the size effect the composites with lower average particle size showed improved strength at higher filler contents. Experimental values of strengths and modulii are compared with some of the theoretical models for composite properties. (C) 2002 Kluwer Academic Publishers.

Surface chemical characterisation of Paenibacillus polymyxa before and after adaptation to sulfide minerals

A heterotroph Paenibacillus polymyxa bacteria is adapted to pyrite, chalcopyrite, galena and sphalerite minerals by repeated subculturing the bacteria in the presence of the mineral until their growth characteristics became similar to the growth in the absence of mineral. The unadapted and adapted bacterial surface have been chemically characterised by zeta-potential, contact angle, adherence to hydrocarbons and FT-IR spectroscopic studies. The surface free energies of bacteria have been calculated by following the equation of state and surface tension component approaches. The aim of the present paper is to understand the changes in surface chemical properties of bacteria during adaptation to sulfide minerals and the projected consequences in bioflotation and bioflocculation processes. The mineral-adapted cells became more hydrophilic as compared to unadapted cells. There are no significant changes in the surface charge of bacteria before and after adaptation, and all the bacteria exhibit an iso-electric point below pH 2.5. The contact angles are observed to be more reliable for hydrophobicity assessment than the adherence to hydrocarbons. The Lifschitz–van der Waals/acid–base approach to calculate surface free energy is found to be relevant for mineral–bacteria interactions. The diffuse reflectance FT-IR absorbance bands for all the bacteria are the same illustrating similar surface chemical composition. However, the intensity of the bands for unadapted and adapted cells is significantly varied and this is due to different amounts of bacterial secretions underlying different growth conditions.

Factors associated with 2009 pandemic influenza A (H1N1) vaccination acceptance among university students from India during the post-pandemic phase

Background: There was a low adherence to influenza A (H1N1) vaccination program among university students and health care workers during the pandemic influenza in many parts of the world. Vaccination of high risk individuals is one of the recommendations of World Health Organization during the post-pandemic period. It is not documented about the student's knowledge, attitude and willingness to accept H1N1 vaccination during the post-pandemic period. We aimed to analyze the student's knowledge, attitude and willingness to accept H1N1 vaccination during the post-pandemic period in India. Methods: Vaccine against H1N1 was made available to the students of Vellore Institute of Technology, India from September 2010. The data are based on a cross-sectional study conducted during October 2010 to January 2011 using a self-administered questionnaire with a representative sample of the student population (N = 802). Results: Of the 802 respondents, only 102/802 (12.7%) had been vaccinated and 105/802 (13%) planned to do so in the future, while 595/802 (74%) would probably or definitely not get vaccinated in the future. The highest coverage was among the female (65/102, 63.7%) and non-compliance was higher among men in the group (384/595; 64.5%) (p < 0.0001). The representation of students from school of Bio-sciences and Bio-technology among vaccinees is significantly higher than that of other schools. Majority of the study population from the three groups perceived vaccine against H1N1 as the effective preventive measure when compared to other preventive measures. 250/595 (42%) of the responders argued of not being in the risk group. The risk perception was significantly higher among female (p < 0.0001). With in the study group, 453/802 (56.4%) said that they got the information, mostly from media. Conclusions: Our study shows that the vaccination coverage among university students remains very low in the post-pandemic period and doubts about the safety and effectiveness of the vaccine are key elements in their rejection. Our results indicate a need to provide accessible information about the vaccine safety by scientific authorities and fill gaps and confusions in this regard.

Seismic Microzonation: Principles,Practices and Experiments

This paper presents an overview of the seismic microzonation and the grade/level based study along with methods used for estimating hazard. The principles of seismic microzonation along with some current practices are discussed. Summary of seismic microzonation experiments carried out in India is presented. A detailed work of seismic microzonation of Bangalore has been presented as a case study. In this case study, a seismotectonic map for microzonation area has been developed covering 350 km radius around Bangalore, India using seismicity and seismotectonic parameters of the region. For seismic microzonation Bangalore Mahanagar Palike (BMP) area of 220 km2 has been selected as the study area. Seismic hazard analysis has been carried out using deterministic as well as probabilistic approaches. Synthetic ground motion at 653 locations, recurrence relation and peak ground acceleration maps at rock level have been generated. A detailed site characterization has been carried out using borehole with standard penetration test (SPT) ―N‖ values and geophysical data. The base map and 3-dimensional sub surface borehole model has been generated for study area using geographical information system (GIS). Multichannel analysis of surface wave (MASW)method has been used to generate one-dimensional shear wave velocity profile at 58 locations and two- dimensional profile at 20 locations. These shear wave velocities are used to estimate equivalent shear wave velocity in the study area at every 5m intervals up to a depth of 30m. Because of wider variation in the rock depth, equivalent shear for the soil overburden thickness alone has been estimated and mapped using ArcGIS 9.2. Based on equivalent shear wave velocity of soil overburden thickness, the study area is classified as ―site class D‖. Site response study has been carried out using geotechnical properties and synthetic ground motions with program SHAKE2000.The soil in the study area is classified as soil with moderate amplification potential. Site response results obtained using standard penetration test (SPT) ―N‖ values and shear wave velocity are compared, it is found that the results based on shear wave velocity is lower than the results based on SPT ―N‖ values. Further, predominant frequency of soil column has been estimated based on ambient noise survey measurements using instruments of L4-3D short period sensors equipped with Reftek 24 bit digital acquisition systems. Predominant frequency obtained from site response study is compared with ambient noise survey. In general, predominant frequencies in the study area vary from 3Hz to 12Hz. Due to flat terrain in the study area, the induced effect of land slide possibility is considered to be remote. However, induced effect of liquefaction hazard has been estimated and mapped. Finally, by integrating the above hazard parameters two hazard index maps have been developed using Analytic Hierarchy Process (AHP) on GIS platform. One map is based on deterministic hazard analysis and other map is based on probabilistic hazard analysis. Finally, a general guideline is proposed by bringing out the advantages and disadvantages of different approaches.

Seismic Microzonation of Bangalore - Preliminary Maps

This paper presents an overview of the seismic microzonation and the grade/level based study along with methods used for estimating hazard. The principles of seismic microzonation along with some current practices are discussed. Summary of seismic microzonation experiments carried out in India is presented. A detailed work of seismic microzonation of Bangalore has been presented as a case study. In this case study, a seismotectonic map for microzonation area has been developed covering 350 km radius around Bangalore, India using seismicity and seismotectonic parameters of the region. For seismic microzonation Bangalore Mahanagar Palike (BMP) area of 220 km2 has been selected as the study area. Seismic hazard analysis has been carried out using deterministic as well as probabilistic approaches. Synthetic ground motion at 653 locations, recurrence relation and peak ground acceleration maps at rock level have been generated. A detailed site characterization has been carried out using borehole with standard penetration test (SPT) ―N‖ values and geophysical data. The base map and 3-dimensional sub surface borehole model has been generated for study area using geographical information system (GIS). Multichannel analysis of surface wave (MASW)method has been used to generate one-dimensional shear wave velocity profile at 58 locations and two- dimensional profile at 20 locations. These shear wave velocities are used to estimate equivalent shear wave velocity in the study area at every 5m intervals up to a depth of 30m. Because of wider variation in the rock depth, equivalent shear for the soil overburden thickness alone has been estimated and mapped using ArcGIS 9.2. Based on equivalent shear wave velocity of soil overburden thickness, the study area is classified as ―site class D‖. Site response study has been carried out using geotechnical properties and synthetic ground motions with program SHAKE2000.The soil in the study area is classified as soil with moderate amplification potential. Site response results obtained using standard penetration test (SPT) ―N‖ values and shear wave velocity are compared, it is found that the results based on shear wave velocity is lower than the results based on SPT ―N‖ values. Further, predominant frequency of soil column has been estimated based on ambient noise survey measurements using instruments of L4-3D short period sensors equipped with Reftek 24 bit digital acquisition systems. Predominant frequency obtained from site response study is compared with ambient noise survey. In general, predominant frequencies in the study area vary from 3Hz to 12Hz. Due to flat terrain in the study area, the induced effect of land slide possibility is considered to be remote. However, induced effect of liquefaction hazard has been estimated and mapped. Finally, by integrating the above hazard parameters two hazard index maps have been developed using Analytic Hierarchy Process (AHP) on GIS platform. One map is based on deterministic hazard analysis and other map is based on probabilistic hazard analysis. Finally, a general guideline is proposed by bringing out the advantages and disadvantages of different approaches.

CFD Based Design Optimizations of the Diffuser of a Gas Dynamically Driver Laser Cavity

Based on the an earlier CFD analysis of the performance of the gas-dynamically controlled laser cavity [1]it was found that there is possibility of optimizing the geometry of the diffuser that can bring about reductions in both size and cost of the system by examining the critical dimensional requirements of the diffuser. Consequently,an extensive CFD analysis has been carried out for a range of diffuser configurations by simulating the supersonic flow through the arrangement including the laser cavity driven by a bank of converging – diverging nozzles and the diffuser. The numerical investigations with 3D-RANS code are carried out to capture the flow patterns through diffusers past the cavity that has multiple supersonic jet interactions with shocks leading to complex flow pattern. Varying length of the diffuser plates is made to be the basic parameter of the study. The analysis reveals that the pressure recovery pattern during the flow through the diffuser from the simulation, being critical for the performance of the laser device shows its dependence on the diffuser length is weaker beyond a critical lower limit and this evaluation of this limit would provide a design guideline for a more efficient system configuration.The observation based on the parametric study shows that the pressure recovery transients in the near vicinity of the cavity is not affected for the reduction in the length of the diffuser plates up to its 10% of the initial size, indicating the design in the first configuration that was tested experimentally has a large factor of margin. The flow stability in the laser cavity is found to be unaffected since a strong and stable shock is located at the leading edge of the diffuser plates while the downstream shock and flow patterns are changed, as one would expect. Results of the study for the different lengths of diffusers in the range of 10% to its full length are presented, keeping the experimentally tested configuration used in the earlier study [1] as the reference length. The conclusions drawn from the analysis is found to be of significance since it provides new design considerations based on the understanding of the intricacies of the flow, allowing for a hardware optimization that can lead to substantial size reduction of the device with no loss of performance.

Model track studies on fouled ballast using ground penetrating radar and multichannel analysis of surface wave

Ballast fouling is created by the breakdown of aggregates or outside contamination by coal dust from coal trains, or from soil intrusion beneath rail track. Due to ballast fouling, the conditions of rail track can be deteriorated considerably depending on the type of fouling material and the degree of fouling. So far there is no comprehensive guideline available to identify the critical degree of fouling for different types of fouling materials. This paper presents the identification of degree of fouling and types of fouling using non-destructive testing, namely seismic surface-wave and ground penetrating radar (GPR) survey. To understand this, a model rail track with different degree of fouling has been constructed in Civil engineering laboratory, University of Wollongong, Australia. Shear wave velocity obtained from seismic survey has been employed to identify the degree of fouling and types of fouling material. It is found that shear wave velocity of fouled ballast increases initially, reaches optimum fouling point (OFP), and decreases when the fouling increases. The degree of fouling corresponding after which the shear wave velocity of fouled ballast will be smaller than that of clean ballast is called the critical fouling point (CFP). Ground penetrating radar with four different ground coupled antennas (500 MHz, 800 MHz, 1.6 GHz and 2.3 GHz) was also used to identify the ballast fouling condition. It is found that the 800 MHz ground coupled antenna gives a better signal in assessing the ballast fouling condition. Seismic survey is relatively slow when compared to GPR survey however it gives quantifiable results. In contrast, GPR survey is faster and better in estimating the depth of fouling. (C) 2011 Elsevier B.V. All rights reserved.

Relation between Local Structure and Glass Forming Ability of Liquid Alloys

An attempt has been made to describe the glass forming ability (GFA) of liquid alloys, using the concepts of the short range order (SRO) and middle range order (MRO) characterizing the liquid structure.A new approach to obtain good GFA of liquid alloys is based on the following four main factors: (1) formation of new SRO and competitive correlation with two or more kinds of SROs for crystallization, (2) stabilization of dense random packing by interaction between different types of SRO, (3) formation of stable cluster (SC) or middle range order (MRO) by harmonious coupling of SROs, and (4) difference between SRO characterizing the liquid structure and the near-neighbor environment in the corresponding equilibrium crystalline phases. The atomic volume mismatch estimated from the cube of the atomic radius was found to be a close relation with the minimum solute concentration for glass formation. This empirical guideline enables us to provide the optimum solute concentration for good GFA in some ternary alloys. Model structures, denoted by Bernal type and the Chemical Order type, were again tested in the novel description for the glass structure as a function of solute concentration. We illustrated the related energetics of the completion between crystal embryo and different types of SRO. Recent systematic measurements also provide that thermal diffusivity of alloys in the liquid state may be a good indicator of their GFA.