951 resultados para Geology--Switzerland--Maps
Resumo:
The study area comprises Guarinos Greenstone Belt which is located in the centralwest state of Goias and has an approximate size of 280 km2. The present work has as main objective to characterize the metamorphism of the greenstone belt and the relationship between the tectonic events and the metamorphism. For the execution of the work we used data collected in the course Geological Mapping of Crystalline Area of the geology course of UNESP, classes 2009 and 2010, the data collected by Alex Choupina Joaquim Andrade Silva in his master's thesis and the information collected in field in the study area. This compilation of data allows approximately 200 thin sections have been evaluated and allowed the construction of the metamorphic map in scale 1:125.000, also allowed the preparation of the geological map in scale 1:125.000 greestone belt, based on 1:25.000 scale maps performed by students of UNESP and the mapping conducted by Silva (2011). The study area was divided into two tectonic compartments depending on the Shear Zone Engenho Velho that longitudinally crosses study area, with direction approximately NW-SE. The west compartment is bordered by granite-gneiss complex and the east compartment, seems thicker to the south and narrows gradually towards the north and its structure is seen in general as a great monoclinal with NW-SE direction with trim to SW, this way your stack was considered as a package of rocks at the base and metaultramafic metamafic the top, with a second package in tectonic contact, which is composed of detrital and chemical metasedimentary rocks. The east compartment is represented by the intrusion of a large granitic body surrounded by amphibolites and metasediments, is bounded on the east by a granite-gneiss complexes through thrust fault, and is bounded on the west by the other compartment. The structure of the compartment is seen as a major axis oriented roughly... (Completo abstract click electronic access below)
Resumo:
Pipelines are linear engineering works, designed mostly for transporting oil and its derivatives for long distances, furnishing even the farthermost zones of the country. Due to oil sector needs to ensure for the safety and conservation of its properties, several geotechnical studies are being held at the pipelines field, in order to preserve this important transportation, and also to prevent accidents, which might seriously compromise the environment and the population who lives around it. The OSBRA pipeline, who connects the city of Paulínia to the capital Brasília, is one of these engineering works that deserves to be pointed out. This research, performed at the Ribeirão da Prata Basin, was a pilot study conducted with the main objective of testing the current methodology efficiency, for future applications in the closest watersheds to the OSBRA pipeline. The objective of this research is to analyze flood wave and debris flow processes in a non-fictional watershed, by comparing two different kinds of methods: the first one based on simulation models (software ‘ABC 6’), and the other one by flood wave and debris flow susceptibility mapping. The results from the hydrological modeling were both hydrographs and ietographs that estimated values of outputs and infiltration. To construct the susceptibility maps were necessary three other maps: ground use and occupation maps, divided according to the different protection degrees that were offered to the ground; maps of dam locations in the area and physiographic compartimentation maps, divided according to the local geology. To complete the methodology, the results were collected from both methods for comparison. The obtained product for this methodology was series of data whose different susceptibility degrees to flood wave and debris flow could define the safest route for a pipeline crossing in this watershed...
Resumo:
The disordered occupation in several cities in Brazil, is very common, especially during the rainy season, there are numerous cases of gravitational mass movements, with deads of human and builds destruction. The main objective of this work was to identify and map areas to mass movements, through the geo, the municipality of Várzea Paulista, the state of Sao Paulo. For the purpose, were prepared thematic maps of slope, geology, pedology, geomorphology and land use and occupation, which were overlaid using ArcGIS GIS Multicriteria Analysis. Each subject received a weight of influence to the outbreak of such processes and the final result was obtained map of susceptibility to mass movements of the city of Várzea Paulista. This survey found that there are many occupied areas within the city that require monitoring of the Government, especially in the rainy months, because they are in very fragile in terms of geological and geomorphological features. Considering that the data on the physical and natural aspects are scarce in the literature for this region, the results obtained in this study as well as the gathering of information of the physical and cartographic products developed, will greatly contribute to the administration of the municipality, subsidies they provide for the proper use planning and land tenure, pointing out the weak areas of the city geotechnical point of view
Resumo:
The spatial chaotic urban growth is an increasing and common problem in Brazilian cities, especially in the State of São Paulo. In order to assist the territorial expansion planning, the present study aimed to conduct the environmental diagnosis of urban expansion areas in the City of Jaguariúna – SP, bounded by the Municipal Plan. From the preparation and analysis of thematic maps, literature review and field analysis, data were collected for use and occupation, geology, geomorphology, pedology, vegetation, water resources and features surrounding the five urban sprawl existing areas. It was noted, in general, that these areas are suitable for urban occupation, since they show flat geomorphology characteristics, with flattened, medium to large hills, slightly undulated, with low slope, and soils that do not present risks to the deployment of buildings, once properly managed. It was also observed a few water bodies crossing these areas and a few areas with native vegetation beyond permanent protection areas along the rivers. By the analysis of these areas and their surroundings, it was possible to determine on which area the urbanization process can occur more quickly. Thus, the study allows the City of Jaguariúna to perform a more effective occupation planning in these areas, always aiming the sustainable development and, consequently, the improvement in population’s quality of life, as well as the maintenance of environmental quality.
Resumo:
A tectono-stratigraphic study of bivalve coquina-reservoir of Linguado Field allowed to identify two trends of permoporosity development. The delineation of these depositional-diagenetic traps were made through structural and stratigrafic cross-sections and maps. It resulted in the identification of shelf-ramp systems (tilted to SSE), it tickens from 60 to 70 meters and ends against an antithetic fault. The main coquina is bounded by fine siliciclastic units, white clay (low Gamma Ray values) or shale (high Gamma Ray values) lithologies, influencing diagenesis of basal or top coquina limestones (cimented, non-porous). Also in the middle of coquina-reservoir the “clayer” material is also associated with cemented carbonates, with also compartimentalize the reservoir into two subzones. The coquina porosity of the subzones is taken from density-neutron logs, while induction log estimates permeabilities and fluid saturations. It’s noticed the porosity development into pairs, good one followed by a regular/poor one and vice versa. These pairs form verticals succession, pair cycles where porosity improves or decreases upwards. These two scales of pore heterogeneity impose strong layering to the reservoir, and influences fluid saturations, oil-water contacts and porosity cut-offs. In a cross-section with density and induction logs, it can be observed the porosity variation along the shelf-ramp coquina (between 3LI_0004_RJS e 3RJS_0157C_RJ), the porosity is better developed in a downdip direction in the case of the two shelf wells, and also be the three ramp wells. The southern west downdip, 3RJS_0157C_RJ well, has best porosity pairs-cycles; however, its lowest structural conditions favour water saturation. Therefore it is fundamental for reservoir fluid evaluation a cross-plot analysis of RHOB-NPHI and Induction logs
Resumo:
Geological-geotechnical problems affecting escarps as well as embankment and fill slopes of roads and motorways may generate different types of unsteadiness, which are mainly arisen from the deficient knowledge about the physical environment. This results in unsuitable engineering projects and inadequate executions, which can be worsened by an occasional inappropriate maintenance of the construction. A geologically-geotechnically characterization of escarps and slopes is crucial in order to prevent these problems. This work deals with a geological-geotechnical study of 1:10.000 scale mapping in a stretch of a local road (CHQ-40) at the Serra de Itaqueri, Charqueada town, State of São Paulo. The stretch is known by several physical problems as erosion and mass movement. The methods of study were based on an integrative analysis of the diverse elements of the physical environment by using aerial photographs - to obtain the physiographic compartmentalization of terrain units - as well as field work - to accomplish the evaluation of the units by employing sketch lists. To achieve this, we selected several techniques in order to identify and classify different types of existing problems as erosion, landslide in embankments and fill slopes, rockfall, block rolling, among others. We also included the analysis of soil horizon, thickness and composition. The geological-geotechnical mapping resulted in six units: 1- Sandstones in cuesta’s backhill; 2 – Basalts in cuesta’s front; 3- Sandstones in cuesta’s front; 4 – Talus and colluvial deposits at cuesta’s foothill; 5- Sandstones of the Piramboia Formation in hillside; and 6 – Colluvial soil in the hill top. A characterization of the geological-geotechnical units is detailed, coupled to the cartographic material. Other cartographic products elaborated for this study included 1:10.000 maps of hypsometry, slope and curvature
Resumo:
The Namorado Oil Field represents the beginning of the oil exploration in Brazil, in the 70s, and it is still a subject of researches because the importance of this turbidite sandstone in the brazilian oil production. The Namorado’s production level was denominated “Namorado sandstone”, it is composed by turbidite sandstone deposited during the Albian-Cenomanian. In order to define the structural geometry of the main reservoir, geological and geophysical tools like RECON and Geographix (Prizm – Seisvision) softwares were used, and its application was focused on geological facies analysis, for that propose well logs, seismic interpretation and petrophysical calculations were applied. Along this work 15 vertical wells were used and the facies reservoirs were mapped of along the oil field; it is important to mentioned that the all the facies were calibrated by the correlation rock vs log profile, and 12 reservoir-levels (NA-1, NA-2, NA-3, NA-4, NA-5, NA-6, NA-7, NA-8, NA-9, NA-10, NA-11 e NA-12) were recognized and interpreted. Stratigraphic sections (NE-SW and NW-SE) were also built based on stratigraphic well correlation of each interpreted level, and seismic interpretation (pseudo-3D seismic data) on the southeastern portion of the oil field. As results it was interpreted on two- and three-dimensional maps that the deposition reservoir’s levels are hight controlled by normal faults systems. This research also shows attribute maps interpretation and its relationship with the selection of the reservoir attribute represented on it. Finally the data integration of stratigraphic, geophysical and petrophysical calculations lets us the possibility of obtain a detail geological/petrophysical 3D model of the main reservoir levels of “Namorado sandstone” inside the oil/gás field
Resumo:
The regional geological work for the oil industry, in order to find potential areas for hydrocarbon exploration and understand the geological parameters responsible for the formation of the deposit are known importance. This work fits into that scenario, with regional research with the aid of wells and 2D and 3D seismic sold by DBEP (Database Exploration and Production). Were also used as GeoGraphix software package Landmarks modules Prizm and SeisWork 2D and 3D, and the Surfer 8 and ArcGIS 9.2 with the infrastructure provided by the 05 PRH - ANP with LSGI (Laboratory of Seismic and Geological Interpretation) located at UNESP -- Campus de Rio Claro. The work focuses on study the trend of oil-Badejo-Linguado-Pampo, producing fields since the beginning of offshore holdings. The Campos Basin is now known as the offshore basin of the country more productive, and the high structural Badejo is a structure of great importance in the basin presents itself as largely responsible for the conditioning of hydrocarbon fields Pampo, Linguado and Badejo. Therefore this work also aims to increase knowledge of the region in terms of tectonic and stratigraphic characterize the geometry of the structures associated with this major regional structure. For this we used structural contour maps of the main chrono-horizons, and Isopach maps for the purpose of better understanding the tectono-sedimentary evolution of the Campos Basin locally.
Resumo:
The mining of sand, currently, is essential for urban growth, by providing input for the building industry. The consequences of this mining activity to environmental triggers may be severe and irreversible. Among the major impacts caused by sand mining the riparian vegetation removal is detached. The riparian vegetation is essential for balance and maintaining the local ecosystem. For all that had been shown, is possible to verify the importance of environmental studies in areas wich there are mining. This study aimed specially to assess environmental impacts triggered by a mining, located near the headwaters of the stream Mandu, situated in Ajapi, District of Rio Claro-SP. For this purpose, we used remote sensing techniques and GIS to produce thematic maps of slope, pedology, geology, land use and occupation of the soil, and riparian vegetation, using the capabilities of GIS / ArcGIS. The slope map was based on data from the Cartographic IGC 1979, scale 1:10,000. For the production of pedological and geological maps were used Semi-Detailed soil survey of the state of São Paulo, 1981 (1:100,000) and the Geological Map of Zaine (1994), scale 1:50,000, respectively. Since the maps of Use and Land Occupation and Riparian Forest were obtained by visual interpretation of the image of CBERS 2010 following the merger between the HRC and CCD images. From these mappings, and through multi-criteria analysis, map of susceptibility to erosion was made, which supported the environmental assessment of the studied area, indicating susceptible and unsuitable areas for the deployment of economic activities and urban sprawl. This study serves as a model can be replicated in other watersheds, assisting in the proper use planning and land use, aiming at the rational use of natural resources
Resumo:
Pós-graduação em Geociências e Meio Ambiente - IGCE
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Geociências e Meio Ambiente - IGCE
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Geologia Regional - IGCE
Resumo:
Pós-graduação em Geociências e Meio Ambiente - IGCE