Características de carcaça de cordeiros Hampshire Down e Santa Inês sob diferentes fotoperíodos

O objetivo deste trabalho foi avaliar o efeito do fotoperíodo e da raça nas características de carcaça de cordeiros machos Hampshire Down e Santa Inês. Sete cordeiros Hampshire Down e sete Santa Inês foram submetidos a fotoperíodo de 12 horas luz x 12 horas escuro (curto) e de 18 horas luz x 6 horas escuro (longo). Após o desmame, os cordeiros foram alojados em baias individuais de acordo com os tratamentos. Ao atingirem 31 kg de peso vivo, foram abatidos e a carcaça e os componentes não-constituintes da carcaça foram pesados. Cordeiros Santa Inês apresentaram peso de carcaça quente superior ao dos Hampshire e maior rendimento comercial. Cordeiros Santa Inês apresentaram maior peso de sangue, coração, pulmão, rins e baço. Já os cordeiros Hampshire Down apresentaram pesos de pele, patas e aparelho gastrintestinal cheio superiores aos do Santa Inês. Os cordeiros Santa Inês apresentaram maior largura de garupa e comprimento de perna do que os Hampshire Down. Os cordeiros Santa Inês apresentaram porcentagem de costela descoberta e baixos maior do que os Hampshire Down, com maior porcentagem de perna. A raça influencia mais as características de carcaça do que o fotoperíodo.

Produtividade e qualidade fisiológica de sementes de feijão em conseqüência da aplicação foliar de manganês

O objetivo deste trabalho foi avaliar o efeito de doses e épocas de aplicação de manganês, por via foliar, na produtividade e qualidade fisiológica de sementes do feijoeiro irrigado 'Pérola', cultivado em Neossolo Quatizarênico. O delineamento utilizado foi o de blocos ao acaso, em arranjo fatorial 4x3, com quatro repetições. Os tratamentos constituíram-se de quatro doses de Mn (0, 150, 300 e 600 g ha-1) aplicadas em três épocas: R5 (pré-florescimento), R6 (florescimento pleno) e divididas metade em R5 e metade em R6. Mesmo em solo com alto teor de Mn, a aplicação via foliar do nutriente aumentou o número de vagens por planta, a massa de 100 sementes e a produtividade de sementes do feijoeiro. Não houve diferença entre o fornecimento de Mn via foliar no pré-florescimento e no florescimento do feijoeiro. A germinação de sementes de feijão não foi afetada pelas aplicações de Mn via foliar em diferentes épocas e doses. O índice de velocidade de emergência diminuiu com a aplicação de Mn.

Mating system in Myracrodruon urundeuva (Anarcadiaceae): implications for conservation genetics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of varying curvature and width on the electronic states of GaAs quantum rings

Stationary states of an electron in thin GaAs elliptical quantum rings are calculated within the effective-mass approximation. The width of the ring varies smoothly along the centerline, which is an ellipse. The solutions of the Schrödinger equation with Dirichlet boundary conditions are approximated by a product of longitudinal and transversal wave functions. The ground-state probability density shows peaks: (i) where the curvature is larger in a constant-with ring, and (ii) in thicker parts of a circular ring. For rings of typical dimensions, it is shown that the effects of a varying width may be stronger than those of the varying curvature. Also, a width profile which compensates the main localization effects of the varying curvature is obtained.

Genetics of anthracnose panel canker disease resistance and its relationship with yield and growth characters in half-sib progenies of rubber tree (Hevea brasiliensis)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization of two full-sized P elements from Drosophila sturtevanti and Drosophila prosaltans

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito do sexo e do peso ao abate sobre a produção de carne de cordeiro. Morfometria da carcaça, pesos dos cortes, composição tecidual e componentes não constituintes da carcaça

Neste experimento, avaliou-se o efeito de sexo (macho e fêmea) e de quatro distintos pesos de abate (28, 32, 36, e 40 kg) sobre a morfometria da carcaça, os pesos dos cortes, a composição tecidual e os componentes não constituintes da carcaça, em cordeiros mestiços Ile de France x Corriedale, terminados em confinamento. Utilizaram-se 40 animais (20 machos e 20 fêmeas), desmamados aos 60 dias e alimentados, à vontade, com uma ração com 16,46% de PB e 67,63% de NDT. Foram divididos em quatro grupos de machos (G1M, G2M, G3M e G4M), sacrificados, respectivamente, com os pesos supracitados, e, da mesma forma, quatro grupos de fêmeas (G1F, G2F, G3F e G4F). Determinaram-se as medidas da carcaça e, de forma subjetiva, a condição corporal, o grau de conformação e o grau de gordura de cobertura. Calcularam-se os índices de compacidade da carcaça e da perna. Foram registrados os pesos e as porcentagens de sete cortes da meia carcaça, bem como as porcentagens de osso, músculo e tecido adiposo, avaliadas por meio de dissecção do lombo. A espessura da gordura de cobertura foi determinada na região lombar. O estudo morfométrico confirmou maior alongamento ósseo dos machos. de maneira geral, as carcaças apresentaram-se com bom acabamento, segundo os índices de compacidade verificados. Os cortes das carcaças das fêmeas foram mais pesados que os dos machos (exceto para o peso de 28 kg ao abate), principalmente em função dos maiores teores de gordura. Destaca-se a representabilidade dos pesos da pele e do conteúdo gastrintestinal na determinação do rendimento da carcaça. Pelos resultados obtidos, recomenda-se 28 kg como peso referência para sacrifício.

Effects of maturation and scarification on seed germination of Syagrus schizophylla (Mart.) glass. (Arecaceae)

Syagrus schizophylla (Mart.) Glass. belongs to the Arecaccae family. This palm is native of Brazil and presents great potential for use in gardens and cultivation in pot. Palms species, with relatively few exceptions, can only be propagated from seeds; even so, there are no reports in the literature about the germination of this palm seeds. The seed maturity is a factor that interferes in the success of the germination process. For some species, studies showed that palm seeds germinated better when the fruits were completely ripe (showing full color) and for other, when they were with green coloration. Several species of the Arecaccae family presents physical dormancy of seeds in varied degrees, demanding treatments for improve germination. The objective of this work was to study the effects of maturation and of the scarification on seed germination of S. schizophylla. The experimental design used was a factorial 3 x 2 (3 maturation stadiums: green, half-ripe - yellow and completely ripe - red; and mechanical scarification: with and without), entirely casualized, with four replications of 15 seeds per plot. The seeds (with 32,43% of humidity) were placed in plastic boxes with sand (60% of humidity, placing water according to weight in each three days), under controlled conditions of alternated temperature of 25-35 degrees C, photoperiod of 12 hours. The percentage of germination and the speed germination index (SGI) were evaluated until 79 days. It was observed that, so much for germination percentage as for SGI, there was not significant difference for the interaction among the two factors, maturation stadium and scarification, however, there were significant differences among the maturation stadiums and between seeds scarified or not. The seeds from green fruits presented lower germination percentage and slower germination when compared with seeds from yellow or red fruits; the seeds from yellow or red fruits didn't differ statistically to each other. To seeds scarificated, independently of the maturation stadium, presented germination percentage significantly larger and the germination was significantly faster when compared with the seeds without scarification.

Genotypic evaluation of Dent composite (Zea mays L) half-sib progenies in late harvest crop conditions

The present work was conducted at FCAV-UNESP, Campus de Jaboticabal, in late harvest crop time of 1991. One hundred interpopulational hybrids obtained from a top-cross between Dent Composite and Flint Composite populations were evaluated. The analyzed characteristics were: Spodoptera frugiperda damages, lodging, damaged ears percentage, and productivity. Estimates of heritability, variance between progenies and genetical gain for each character of available population were determined. Estimates of the progenies variance, like those from heritability for the different analysed characters, indicate that there is an adequate genetical variance for the utilization of that material on subsequent genetic breeding programs, though allowing genetical gains, on the following selection cycles for the characteristics: grain weight, lodging and damages caused by armyworm larvae, whereas for the other characteristics the obtained results were not satisfactory.

On the hardy space H¹ on products of half-spaces

We show that the Hardy space H¹ anal (R2+ x R2+) can be identified with the class of functions f such that f and all its double and partial Hubert transforms Hk f belong to L¹ (R2). A basic tool used in the proof is the bisubharmonicity of |F|q, where F is a vector field that satisfies a generalized conjugate system of Cauchy-Riemann type.

Weight width carapace relationship in the crab hepatus-pudibundus (herbst, 1785) (crustacea, decapoda, calappidae) of the Ubatuba region, SP, Brazil

In populational studies, the weight/width carapace relationship analysis, can furnish indications about the individual physiological variations as a function of the environment, and it can indicate sexual dimorphism. The goal of this research is to find the mathematical expressions of weight/width carapace relationship in the crab Hepatus pudibundus. This study was accomplished by analysing the crabs that were sampled monthly with a shrimp fishing boat equipped with 2 otter-trawl nets, during the period from november/1988 to october/1989. A total of 624 specimens were obtained composed of 244 males and 380 females. In each group the sex, the weight (PE) and the carapace width (LC) were determined. The obtained values agree with the studied range, showing variations during male and female development, represented by the potential function of the equation Y = aX(b). Such variations are probably related to reproductive strategies.

Electronic ballast for multiple fluorescent lamp systems

An electronic ballast for multiple tubular fluorescent lamp systems is presented. The proposed structure has a high value for the power factor, a dimming capability, and soft switching of the semiconductor devices operated at high frequencies. A zero-current switching pulse width modulated SEPIC converter is used as the rectifying stage and it is controlled using the instantaneous average input current technique. The inverting stage consists of classical resonant half-bridge converter with series-resonant parallel-loaded filters. The dimming control technique is based on varying the switching frequency and monitoring the phase shift of the current drained by the filters and lamps in order to establish a closed loop control. Experimental results are presented that validate the theoretical analysis.

The influence of cervical finish line, internal relief, and cement type on the cervical adaptation of metal crowns

Objective: the aim of this investigation was to evaluate the cervical adaptation of metal crowns under several conditions, namely (1) variations in the cervical finish line of the preparation, (2) application of internal relief inside the crowns, and (3) cementation using different luting materials. Method and Materials: One hundred eighty stainless-steel master dies were prepared simulating full crown preparations: 60 in chamfer (CH), 60 in 135-degree shoulder (OB), and 60 in rounded shoulder (OR). The finish lines were machined at approximate dimensions of a molar tooth preparation (height: 5.5 mm; cervical diameter: 8 mm; occlusal diameter: 6.4 mm; taper degree: 6; and cervical finish line width: 0.8 mm). One hundred eighty corresponding copings with the same finish lines were fabricated. A 30-mu m internal relief was machined 0.5 mm above the cervical finish line in 90 of these copings. The fit of the die and the coping was measured from all specimens (L0) prior to cementation using an optical microscope. After manipulation of the 3 types of cements (zinc phosphate, glass-ionomer, and resin cement), the coping was luted on the corresponding standard master die under 5-kgf loading for 4 minutes. Vertical discrepancy was again measured (L1), and the difference between L1 and L0 indicated the cervical adaptation. Results: Significant influence of the finish line, cement type, and internal relief was observed on the cervical adaptation (P < .001). The CH type of cervical finish line resulted in the best cervical adaptation of the metal crowns regardless of the cement type either with or without internal relief (36.6 +/- 3 to 100.8 +/- 4 mu m) (3-way analysis of variance and Tukey's test, alpha = .05). The use of glass-ionomer cement resulted in the least cervical discrepancy (36.6 +/- 3 to 115 +/- 4 mu m) than those of other cements (45.2 +/- 4 to 130.3 +/- 2 mu m) in all conditions. Conclusion: the best cervical adaptation was achieved with the chamfer type of finish line. The internal relief improved the marginal adaptation significantly, and the glass-ionomer cement led to the best cervical adaptation, followed by zinc phosphate and resin cement.