A novel hanging spherical drop system for the generation of cellular spheroids and high throughput combinatorial drug screening

We propose a novel hanging spherical drop system for anchoring arrays of droplets of cell suspension based on the use of biomimetic superhydrophobic flat substrates, with controlled positional adhesion and minimum contact with a solid substrate. By facing down the platform, it was possible to generate independent spheroid bodies in a high throughput manner, in order to mimic in vivo tumour models on the lab-on-chip scale. To validate this system for drug screening purposes, the toxicity of the anti-cancer drug doxorubicin in cell spheroids was tested and compared to cells in 2D culture. The advantages presented by this platform, such as feasibility of the system and the ability to control the size uniformity of the spheroid, emphasize its potential to be used as a new low cost toolbox for high-throughput drug screening and in cell or tissue engineering.

Biomimetic superhydrophobic surfaces patterned with wettable spots as implantable chips for in vivo high-content 3D biomaterials response assessment

"Tissue engineering: part A", vol. 21, suppl. 1 (2015)

A carta do presidente e o relato voluntário do capital intelectual: análise das empresas do segmento do novo mercado da BM&FBOVESPA

Dissertação de mestrado em Contabilidade

Synthesis and biological evaluation of mono and bis-naphthalimide derivatives against SH-SY5Y, human brain cancer cells

Dissertação de mestrado em Medicinal Chemistry

Geometría de variedades localmente homogéneas

Dado un espacio homogéneo G/K con descomposición g=k + p, de su álgebra de Lie, una estructura en p invariante por Ad k, produce una estructura en G/K tal que los elementos de G son automorfismo. Si L es un subgrupo discreto de G, la variedad L/G/K es localmente homogénea y hereda la estructura de G/K. Los temas de investigación propuestos en geometría de variedades localmente homogéneas son: 1- Grupos de tipo H y extensiones solubles. 2- Nilvariedades homogéneas de dim 3 y 4. 3- Estructuras hipercomplejas en nilvariedades de dim 8. 4- Estructuras hermitianas en espacios simétricos. 5- Variedades compactas flat con holon Zsub2 m's Zsub2. 6- Construcción de variedades de HW generalizadas. 7- Variedades planas hiperkahlerianas.

Holonomia, geometría homogénea, dinámica topológica y rango de variedades riemannianas

Se estudiará la geometría de subvariedades haciendo hincapié en los grupos de holonomia de la conexión normal, herramienta que ha sido muy útil para atacar diversos problemas clásicos. Se estudiarán los siguientes problemas concretos: a) Resolver la conjetura de que toda subvariedad homogénea irreducible y substancial de la esfera cuyo grupo de holonomia normal no actúa transitivamente en la esfera es una órbita de la representación isotrópica de un espacio simétrico simple. b) ¿Existe alguna relación entre la noción de rango para espacios de curvatura no positiva y la noción de rango de una subvariedad? Respecto al rango de las variedades riemannianas se intenta probar un teorema general de descomposición para variedades riemannianas tal que toda geodésica esté contenida en un flat compacto. (...) Intentará generalizar los siguientes teoremas, válidos para flujos, a extensiones entre flujos, usando el concepto de semigrupo envolvente de una extensión. 1. X métrico y los elementos de E(X) son continuos, entonces E(X) es métrico. 2. Si se agrega la hipótesis de minimal, entonces X es equicontinuo. 3. X minimal, los elementos de E(X) de continuos y T contable entonces es equicontinuo. 4. X minimal y E(X) conmutativo entonces X es equicontinuo. 5. X distal y los elementos de E(X) son continuos, entonces X es equicontinuo.

Desarrollo sustentable de geoestructuras compuestas por suelo loéssico compactado mejorado con agregado de materiales estabilizantes. Sustainable development of compacted loess soil geo-structures with addition of stabilizing materials.

Los suelos estabilizados mediante compactación, permiten obtener materiales con ventajas ténicas y economicas en diferentes tipos de obras de ingeniería. Ejemplos de su uso se tiene en bases viales de autopistas, rutas o calles urbanas, pistas de aterrizaje, barreras de contención para enterramientos sanitarios o lagunas de estabilización, apoyos de plateas para fundación de edificios, losas industriales, entre otras aplicaciones. Las fallas en este tipo de construcciones pueden resultar en catástrofes ambientales, sociales y elevadas pérdidas económicas, por lo que resulta de gran importancia optimizar el diseño e incrementar la seguridad de este tipo de construcciones. Las obras con estas características involucran grandes volúmenes y/o superficies que requieren controles sistemáticos durante su desarrollo, a los fines de garantizar el cumplimiento de las propiedades de los materiales establecidos en la etapa de diseño. De esta forma, es necesario contar con ensayos de campo sencillos, confiables y eficientes que permitan identificar propiedades físicas, mecánicas e hidráulicas. Las geoestructuras generadas mediante la compactación del suelo próximo al sector de construcción pueden funcionar adecuadamente, con reducidos costos de material y transporte. Su estabilización puede ejecutarse en forma natural, o con la incorporación de agregados minerales como bentonita, cal o cemento. Estas incorporaciones mejoran las propiedades hidráulicas y mecánicas del material, optimizando el comportamiento requerido para la obra. Para establecer la forma en la que estos minerales modifican el comportamiento del suelo local compactado deben realizarse investigaciones especiales con los materiales involucrados. En el ámbito internacional existen numerosas investigaciones sobre comportamiento de suelos compactados, no obstante, si bien aportan antecedentes para la planificación de estudios locales, sus resultados no pueden trasladarse de manera directa. Las características propias del suelo local constituye la principal variable debido a la diversidad en las propiedades geotécnicas de cada Región. Esta investigación, se focaliza en el empleo de suelos limosos de la formación loéssica de la zona central de Argentina. Los suelos de la llanura cordobesa poseen comportamientos particulares, los cuales son contemplados en los diseños presentados como resutado de las investigaciones internacionales. Esta particularidad se relaciona con su inestabilidad, lo que los clasifica como suelos colapsables. Los resultados obtenidos en este trabajo podrán ser extendidos a una gran superficie de la Provincia de Córdoba y a la Región Pampeana en general, a los fines de establecer recomendaciones de diseño y construcción para la confección de Pliegos de Especificaciones Técnicas de diferentes tipos de obras públicas y privadas. El estudio contempla la ejecución de un plan experimental a escala de laboratorio y campo. Los materiales corresponden a suelo limosos puros, y diferentes agregados tales como bentonita, cal y cemento. Se planifican ensayos para evaluar el desempeño del material, a partir de la confección de muestras preparadas con diferentes condiciones de compactación (energía, humedad y método), y en forma de mezcla con los distintos tipos de agregados. Se realizarán ensayos de permeabilidad en celdas de pared rígida y flexible, junto a ensayos mecánicos de compresión confinada, simple y triaxial. Para el trabajo experimental de campo se prevé la ejecución de terraplenes de prueba instrumentados con tensiómetros e infiltrómetros para evaluar el comportamiento hidraúlico en el tiempo, junto con ensayos de penetración y plato de carga para la caracterización mecánica. En forma conjunta se propone el desarrollo de modelos numéricos de caracterización hidromecánica. Stabilized soils by compaction, produce materials technical and economic advantages in different types of engineering works. For example, road bases in highways, roads or city streets, containment barriers for sanitary landfill or stabilization ponds, foundation support of building, industrial flat, and other applications. Failures can result in environmental catastrophes, social, and economic loss, so it is important to optimize the design and increase the safety of such buildings. These works involve large surfaces that require systematic tests during construction, so it is necessary to have simple field tests, reliable and efficient to identify physical, mechanical and hydraulic properties. The geo-structures generated by local soil compaction have reduced material and transportation costs. Stabilization can be naturally, or with the addition of mineral aggregates as bentonite, lime and cement. These additions improve the hydraulic and mechanical properties of the material. So, special investigations should be conducted with the materials involved. There are many international studies on compacted soils behavior but their results can not be transferred directly due to the particularities of regional soils. For this research silty soils of central Argentina are the main focus. The soils of Córdoba plains are instability, so are classified as collapsible soils. The results obtained in this work may be extended to a large area of the Province of Cordoba and the Pampas region in general, in order to establish design and construction recommendations. The study includes laboratory and field tests. The materials are pure silty soil, and different aggregates such as bentonite, lime and cement. Tests are planned to evaluate the performance. Laboratory includes rigid and flexible wall cells, confined, triaxial and simple compression tests. For field experimental instrumented embankments will be constructed. A numerical hydromechanical model will be developed.

Espectroscopía de emisión de rayos x. Aplicación a la caracterización de materiales. X-ray emission spectroscopy. Application to materials characterization

La idea principal del proyecto abarca el estudio de parámetros y fenómenos físicos. Los avances logrados se aplicarán al desarrollo de software y metodologías para cuantificación de materiales mediante microanálisis con sonda de electrones y microscopía electrónica de barrido. El microanálisis no es una técnica absoluta, sino que requiere de estándares de referencia, para obviar el uso de ciertos parámetros geométricos y atómicos difíciles de conocer con una precisión adecuada. Para contar con un método sin estándares debe abordarse la determinación de parámetros atómicos e instrumentales, que es uno de los aspectos que se desea encarar en este proyecto. Por otro lado, también se pretende incluir los parámetros estudiados en un software de cuantificación desarrollado por integrantes del proyecto. Otro de los propósitos del plan de trabajo es estudiar la potencialidad de la resolución espacial de una microsonda de electrones con el fin de desarrollar una metodología para caracterizar interfases, bordes de granos e inclusiones, con resolución submicrométrica, ya que los métodos tradicionales de cuantificación se restringen al caso de muestras planas y homogéneas dentro del volumen de interacción, pero la caracterización de inhomogeneidades a nivel micrométrico no ha sido desarrollada todavía, salvo algunas excepciones. The main idea of this project involves the study of physical parameters and phenomena. The concretion of the different goals will permit the elaboration of softeare and methodologies for materials characterization by means of electron probe microanalysis and scanning microscopy. Electron probe microanalysis is not an absolute technique, but requires reference standards in order not to involve certain geometrical and atomic parameters for which high uncertainties cannot be avoided. In order to have standardless method, the determination of atomic and instrumental parameters must be accomplished, as will be faced through this project. Complementary, the parameters studied will be included in a quantification software developed in our research group of FaMAF. Another objective of this activity plan is to study the spatial resolution potentiality of a focalized electron beam, with the aim of characterizing interphases, grain boundaries and inclusions with submicron sensitivity, since the traditional quantification procedures are restricted to flat homogeneous samples, whereas the characterization of inhomogeneities has not been developed yet.

The effects of detergent loading on rotating biological contactor (RBC) wastewater treatment efficiency

There are presently over 182 RBC plants, treating domestic wastewater, in the Republic of Ireland, 136 of which have been installed since 1986. The use of this treatment plant technology, although not new, is becoming increasingly popular. The aim of this research was to assess the effects that a household detergent has on rotating biological contractor treatment plant efficiency. Household detergents contribute phosphorus to the surrounding environment and can also remove beneficial biomass from the disc media. A simple modification was made to a conventional flat disc unit to increase the oxygen transfer of the process. The treatment efficiency of the modified RBC (with aeration cups attached) was assessed against a parallel conventional system, with and without degergent loading. The parameters monitored were chemical oxygen demand (COD), bio-chemical oxygen demand (BOD), nitrates, phosphates, dissolved oxygen, the motors power consumption, pH, and temperature. Some microscopic analysis of the biofilm was also to be carried out. The treatment efficiency of both units was compared, based on COD/BOD removal. The degree of nitrification achievable by both units was also assessed with any fluctuations in pH noted. Monitoring of the phosphorus removal capabilities of both units was undertaken. Relationships between detergent concentrations and COD removal efficiencies were also analysed.

Optimisation of a surface mount technology process using a SnAgCu lead-free alloy

The impending introduction of lead-free solder in the manufacture of electrical and electronic products has presented the electronics industry with many challenges. European manufacturers must transfer from a tin-lead process to a lead-free process by July 2006 as a result of the publication of two directives from the European Parliament. Tin-lead solders have been used for mechanical and electrical connections on printed circuit boards for over fifty years and considerable process knowledge has been accumulated. Extensive literature reviews were conducted on the topic and as a result it was found there are many implications to be considered with the introduction of lead-free solder. One particular question that requires answering is; can lead-free solder be used in existing manufacturing processes? The purpose of this research is to conduct a comparative study of a tin-lead solder and a lead-free solder in two key surface mount technology (SMT) processes. The two SMT processes in question were the stencil printing process and the reflow soldering process. Unreplicated fractional factorial experimental designs were used to carry out the studies. The quality of paste deposition in terms of height and volume were the characteristics of interest in the stencil printing process. The quality of solder joints produced in the reflow soldering experiment was assessed using x-ray and cross sectional analysis. This provided qualitative data that was then uniquely scored and weighted using a method developed during the research. Nested experimental design techniques were then used to analyse the resulting quantitative data. Predictive models were developed that allowed for the optimisation of both processes. Results from both experiments show that solder joints of comparable quality to those produced using tin-lead solder can be produced using lead-free solder in current SMT processes.

Microhabitats de mosquitos (Diptera, Culicidae) em internódios de taquara na Mata Atlântica, Paraná, Brasil

During two consecutive years, from January 1985 to December 1986, a comparative study of mosquitoes preferences for breeding habitat was carried out in the Atlantic Forest of the Serra do Mar, Paraná State, Brazil. To achieve it, 1875 bamboo internodes aligned vertically in live green, bamboo plants Merostachys speciosa Munro and Merostachys sp. were used, in which metabolic water was exuded from the plant itself, and presenting different size/pattern holes at their lateral walls, bored by the local sylvan fauna. Another group of 1200 individual internode traps was used as comparative element, carved out with a transversal cut by a saw, filled with local stream water and held in branches at different heights in the vegetal strata nearby. At both microhabitat types, a total of 17 culicid species was registered. Culex (Microculex) neglectus Lutz, 1904, Cx. (Carrollia) soperi Antunes & Lane, 1937, Sabethes (Sabethes) batesi Lane & Cerqueira, 1942 and Sa. (Sabethinus) melanonymphe (Dyar, 1924)colonized exclusively live plant internodes, while Culex (Microculex) elongatus Rozeboom & Lane, 1950, Cx. (Carrollia) iridescens (Lutz, 1905), Cx. (Carrollia) kompi Valencia,1973and Trichoprosopon (Trichoprosopon) soaresi Dyar & Knab, 1907 bred only in internode traps. The remaining nine species colonized both habitats indistinctly. Quantitatively, was detected the abundance of 60.1% at live green internodes, against 39.9% for internode traps. Concerning the different patterns of bored live internode holes, 40.3% of the total computed specimens were collected in square or rectangular holes, 31.9% in two hole internodes, one minute circular, the other wider, and the remaining 28.8% of specimens distributed in other pattern type internodes. The mosquitoes breeding at these microhabitats fall in the culicid entomofauna specialized at locating and detecting peculiar and propitious mesogen conditions for breeding purposes.

New species of Eupalaestrus from Argentina (Araneae, Theraphosidae, Theraphosinae)

A new species of Eupalaestrus Pocock, 1901 from northern Argentina is described and illustrated. Males and females of Eupalaestrus larae sp. nov. differ from those all other species of the genus by the color with distinct two parallel longitudinal stripes on the femora, patellae, tibiae and one longitudinal stripe reaching half of metatarsi; the presence of a thickened femur and tibia IV; a straight embolus of the male palpal bulb and retrolateral keel pronounced. Specimens were captured in Chaco province, inhabiting unflooded flat grasslands open areas inside forest in transitional Chaco eco-region.

Macroinvertebrates under stochastic hydrological disturbance in Cerrado streams of Central Brazil

In the Cerrado vegetation, where the seasonal is well defined, rainfall has an important role in controlling the flow of streams and consequently on the structure of macroinvertebrates community. Despite the effects of rainfall associated with seasonality are well studied, little is known about the effects of stochastic rains on the community. In the present study we evaluated the structure and faunal composition of four first-order streams in Central Brazil during the dry season in two years, with and without stochastic rains. Community sampling was done by colonization of boards of high density polyethylene (HDPE), removed after one month submerged in streams. Analysis of Variance (ANOVA) performed indicated no difference in rarefied richness between the two periods, different from numeric density of organisms that was higher in the period without disturbance; moreover, the Detrended Correspondence Analysis (DCA) revealed differences in faunal composition between the two periods. Our results indicate that stochastic rainfall is an important factor in structuring the macroinvertebrates community in studied region.

O virus do mixoma no coelho do mato (Sylvilagus minenses), sua transmissão pelos Aedes scapularis e aegypti

The brazilian wild rabbit (Sylvilagus minensis) is sensible to the virus of the mixomatosis but the desease takes on it a mild character, lasts for long time and generally do not kill the animal. The tumors are generally smaller and less numerous than those of the domestic rabbit, but sometimes there were noted large and flat lesions (fig. 3). The natural infection of the wild rabbit may be quite common not only because many rabbits caught in the country were found to be immune as also because it was found among the animals caught in the country near Rio, one that was infected with mixomatosis. The experimental infection of the Sylvilagus may be easily obtained by cutan, subcutan or conjuntival way and also when a health wild rabbit is placed in the same cage with a sick domestic animal. It is also possible to obtain the infection of the wild and domestic rabbits by the bite of infected blood sucking insects as fleas and mosquitoes. The infected mosquito can transmit the disease 2 or 3 times til 17 days after an infective meal on a sick rabbit. The transmission is a mecanical one and only the proboscis of the insect contains the virus as it was shown by the inoculation of emulsions of the proboscis, thorax and abdomen of the mosquito. Though mecanical this kind of transmission acts as an important epidemiological mean of dissemination of the deseasse and splains the suddendly outbreaks of mixomatosis in rabbits breedings where no new rabbits were introduced since very long time. The transmition of mixomatosis by fleas (Slenopsylla) was at first demonstrated by us, then S. Torres pointed out the capacity of Culex fatigans to transmit the desease and now we have proved that Aedes scapularis and Aedes aegypti were also able to transmit it (Foto 1 and 2). The virus of the mixomatosis (Chlamidozoon mixoma) is seen on the smeavs of the tumors of the wild reabbit with the same morphology, as in the material of the domestic animal.

Tratamento eclético da lepra: 20 anos de experiência

The author gives the clinical records of 20 patients, 14 of which were treated during 17 months, and the rest much less. The method used for treatment was the ecclectical — preferred by the A. since many years —, in which he associates electricity with minor surgery, chaulmestrol (pure or with 0.5 p. c. iodine or 4 p. c. creosote) and other auxilliary curative agents. The chaulmoogra derivatives were used daily as nostrils tamponage (2 p.c. mentholated or thymolated ester), periodically by injections inside the enlarged lymph nodes and nerve abscesses, and twice weekly by subcutaneous infiltrations (MUIR method) 5 c.c. each, and chaulmoogra soap tablets per os. The galvanocauterisation session was once per week, on active leprotic lesions, followed by painting with 30 p. c. trichloracetic acid solution. All 20 patients were bacilliferous before treatment, and became stronger positive after some months treatment. At the end 14 negativated and 6 remained positive and sometimes bacilli being very scanty. 16 out of 20 gave interesting serological reactions, viz.: Wassermann, Stern, Kahn. Rubino, Witebsky and Gaté (Formol-gel) positive in 5; Stern, Rubino. Witebsky and Gaté positive and Wassermann and Kahn negative in 2; Stern. Kahn, Witebsky and Gaté positive and Wassermann anticomplementary in 1; Wassermann. Stern, Kahn, Rubino and Gaté negative in 1. in the beginning, and a few months later Stern. Witebsky and Gaté becoming positive; Stern. Rubino. Witebsky and Gaté positive and anticomplementary W. in 1; Stern, Witebsky and Gaté positive and Wassermann. Kahn and Rubino negative in 1; Witebsky and Gaté positive and Wassermann, Stern, Kahn and Rubino negative in 1; Witebsky 3 times anticomplemantary and strongly positive Gaté in 1; Wassermann and Gaté positive in 1; Stern and Rubino positive in 1 and Stern test negative in one. In 7 cases high Formol-gel were associated with a high sedimentation index. Many cases had very high S.I. being a false measure of the severity of the disease; others remained very high notwithstanding the great improvement of the disease. All patients with more than 12 months treatment became practically symptom free. Lepra reaction amongst them was rare and always started by embolic rash, being controlled by destruction of such skin lesions by galvanocauterisation. In a few cases the lepromata infiltrated with "Subintrol" (a 3 p. c. special chaulmoogra soap prepared by Dr. ASTROGILDO MACHADO) were completely destroyd and never relapsed. In October 1946 Dr. ERNEST MUIR saw here a few cases treated by the author's method and suggested the combination of Diasone with galvanocauterisation which is being done now with satifactory results. The second part of this paper, reporting many leprosy cases treated by the so-called ecclectical method, which are symptom free and negativated since five to ten years, will be published as soon as the sulfone-therapy be summarised in some reliable scientific report to be compared with.