Simulação de contaminação de sedimentos e águas subterrâneas por gasolina e álcool: um estudo de monitoramento de variações das propriedades físico-químicas

Geophysics studies in areas impacted by petroleum derivatives describe abnormalities of both low and high electrical resistivity (the opposite of electrical conductivity), confirmed as contaminant phase by chemical analysis: this contradiction can be explained by degrading processes that naturally occur and create sub products that can change the environment conductivity. Monitoring the variation of the parameters mentioned serves as a comparative basis to the variation in geoelectrical parameters, which identified the correlation between the same contaminant parameters and the difference between their behavior studied apart, as well as its relations with the biodegradation process. The results are applied to the fuel distribution and storage sectors, leading to the diagnosis and monitoring of possible groundwater contamination scenarios, and the knowledge of the area exposure time to the contaminant, besides the better remediation alternative and impacts control. Among some conclusions, the most significant are the decrease in conductivity over time, so as the increase in Eh value in the gasoline contaminated tank, as well as the decrease in the pH value in the second tank with ethanol, which can be attributed to its degradation. Comparing the variations in both tanks, it is evident that Eh, pH and electrical conductivity do not behave temporally in a similar way, although some correlations between Eh and pH can be related.

Pagamento por serviços ambientais: estudo de caso: simulação da aplicação do programa do “Produtor de Água” na bacia do Rio Pirajibu

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Simulação geoestatística e classificação numérica para o delineamento de unidade de mapeamento de atributos e erosão do solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

O uso do computador no processo de ensino e aprendizagem: questões de representação social

This paper presents the results of a study aimed at identifying and analyzing the theoretical and methodological principles that guide the practice of teachers in the early years of computer use in the teaching and learning. Specific objectives we seek to identify and analyze the social representations of teachers on the use of computers in teaching and learning. The research took a qualitative approach with a descriptive-explanatory and owned two phases of data collection: a) a questionnaire b) monitoring the daily practice of teachers in a selected school and semi-structured interview. The analysis of data was done through content analysis. Through the interrelationship of the data in the questionnaire, observation and interview, we found that the teachers surveyed have an address that does not match the teaching practice in the use of computers in the educational process. The theoretical expressed by teachers participating in the research meets constructivist beliefs and / or sociointeractionists but teaching practice thins primarily to behavioral assumptions. Observe social issues of representation when the speeches of the participating teachers did not correspond to their practices. Associated with this or as a cause of these conditions have failure, inadequacy or absence of teacher training for the use of computers in the educational process leading to under-utilization of this resource.

Simulação computacional da extração líquido-líquido fracionada de enzimas para produção de biodiesel

Liquid-liquid extraction is utilized for purification of biomolecules by Aqueous Biphasic Systems (ABS), since this process does not damage the biotechnological potential of these compounds. In this work, using the free software Scilab®, the fractionated liquid-liquid extraction was studied aiming a lipase (target enzyme) partition in a water + PEG + DEX system. Lisozime was considered as contaminant. As computer simulations has been extensively used when a first estimation of technical feasibility of process is desired, this work demonstred that the system is viable for recovery the 80 % till 90 % the target enzyme, but should be noted that the trial aimed only the fractionation of the enzyme target of a contaminant, not its concentration, which should be done by another process.

Determinação de chumbo em tubos de raios catódicos e em solo contaminado por espectrometria de absorção atômica

Pós-graduação em Ciência dos Materiais - FEIS

Uma proposta para utilização do computador no processo de ensino e aprendizagem dos primeiros números do sistema hindu-arábico

The aim of this work is presenting the development and the results of a research, which focus of interest has been the making of softwares that could help the process of teaching and learning of the hindu-arabic numerals system, on children in the alphabetical stage. Since the most important presupposes to this work are the development of the number concept according to Jean Piaget (1986-1980) and the reality of the classroom, then three different moments have been fixed: the creation of a beginning scheme of computer activities; the aplication of these activities on children in the alphabetical stage; and, finally, an analysis of the limits and possibilities of these activities while an environment cause of actions that would benefit the process of teaching and learning of the mentioned content. Finally, based on the anlysis of the results obtained, the next step was fixing a more consistant set of computer activities, which makes up a proposal to the use of computer in the process of teaching and learning of the first hindu-arabic numbers

Analise das emissões de CO2 e de energia - simulação com novas tecnologias siderúrgicas

The process of steel production emits a large quantity of greenhouse gases, specifically carbon dioxide (CO2), and the reduction of such emissions is one of the main challenges for the industry in the 21st. Century. To quantify these emissions, the Worldsteel Association (association of the 170 large steel manufacturers of the world) published a methodology (CO2 Emission Data Collection) for calculation and comparison of CO2 emissions among its members. After that, in 2010, this methodology became an ISO (International Organization for Standardization) norm. Today, the calculation of the CO2 emissions in steel making companies follow the ISO 14404-1 for units with blast furnaces and the ISO 14404-2 for units with electric furnaces. In the last years, new technologies were and continue to be developed for the steel making sector aiming at energetic improvements and greenhouse gas reductions (mainly CO2) by the several processes involved in the production of steel. This work had the objective of producing a tool to calculate the CO2 emissions for the steel making sector. An Excel spreadsheet was developed to calculate the emission intensities of CO2 of a steel plant, the Usina Presidente Vargas, of the Companhia Siderúrgica Nacional (CSN). The spreadsheet furnishes results of CO2 emissions and energetic fluxes, and simulates the benefits that some of the new technologies can give to the company. The spreadsheet calculates the emissions in two ways: a) based on the carbon fluxes that enter the unit, and b) based on the emissions of each specific process within the unit (coking, sinterization, blast furnace, among others)

Desenvolvimento de uma ferramenta paramétrica em linguagem APDL para o cálculo da estrutura de um pórtico rolante

Pós-graduação em Engenharia Mecânica - FEG

Explorando a matemática do posicionamento geográfico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Simulação em tempo real de sistemas de distribuição de energia elétrica utilizando-se estruturas com descrição de hardware em software

Pós-graduação em Engenharia Elétrica - FEIS

Modelo de simulação NS-2 para o protocolo DNP3 sobre o protocolo de rede sem fio IEEE 802.15.4 para simulação de baixo custo de aplicação smart grid

Pós-graduação em Engenharia Elétrica - FEIS

Simulação sequencial de atributos diagnósticos do solo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Metodologia de simulação numérica do comportamento térmico em equipamentos eletroeletrônicos

Pós-graduação em Engenharia Elétrica - FEIS

Simulação computacional por elementos finitos de múltiplas fissuras em sólidos usando técnica de fragmentação da malha

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)