Non-linear mechanical behavior of the elastomer polydimethylsiloxane (PDMS) used in the manufacture of microfluidic devices

Polydimethylsiloxane (PDMS) is the elastomer of choice to create a variety of microfluidic devices by soft lithography techniques (eg., [1], [2], [3], [4]). Accurate and reliable design, manufacture, and operation of microfluidic devices made from PDMS, require a detailed characterization of the deformation and failure behavior of the material. This paper discusses progress in a recently-initiated research project towards this goal. We have conducted large-deformation tension and compression experiments on traditional macroscale specimens, as well as microscale tension experiments on thin-film (≈ 50µm thickness) specimens of PDMS with varying ratios of monomer:curing agent (5:1, 10:1, 20:1). We find that the stress-stretch response of these materials shows significant variability, even for nominally identically prepared specimens. A non-linear, large-deformation rubber-elasticity model [5], [6] is applied to represent the behavior of PDMS. The constitutive model has been implemented in a finite-element program [7] to aid the design of microfluidic devices made from this material. As a first attempt towards the goal of estimating the non-linear material parameters for PDMS from indentation experiments, we have conducted micro-indentation experiments using a spherical indenter-tip, and carried out corresponding numerical simulations to verify how well the numerically-predicted P(load-h(depth of indentation) curves compare with the corresponding experimental measurements. The results are encouraging, and show the possibility of estimating the material parameters for PDMS from relatively simple micro-indentation experiments, and corresponding numerical simulations.

Fabrication of Controlled Release Devices Using Supercritical Antisolvent Method

In this study, the supercritical antisolvent with enhanced mass transfer method (SASEM) is used to fabricate micro and nanoparticles of biocompatible and biodegradable polymer PLGA (poly DL lactide co glycolic acid). This process may be extended to the encapsulation of drugs in these micro and nanoparticles for controlled release purposes. Conventional supercritical antisolvent (SAS) process involves spraying a solution (organic solvent + dissolved polymer) into supercritical fluid (CO[subscript 2]), which acts as an antisolvent. The high rate of mass transfer between organic solvent and supercritical CO[subscript 2] results in supersaturation of the polymer in the spray droplet and precipitation of the polymer as micro or nanoparticles occurs. In the SASEM method, ultrasonic vibration is used to atomize the solution entering the high pressure with supercritical CO[subscript 2]. At the same time, the ultrasonic vibration generated turbulence in the high pressure vessel, leading to better mass transfer between the organic solvent and the supercritical CO₂. In this study, two organic solvents, acetone and dichloromethane (DCM) were used in the SASEM process. Phase Doppler Particle Analyzer (PDPA) was used to study the ultrasonic atomization of liquid using the ultrasonic probe for the SASEM process. Scanning Electron Microscopy (SEM) was used to study the size and morphology of the polymer particles collected at the end of the process.

Preguntas de los estudiantes sobre dispositivos científicos = Students’ questions about scientific devices

¿Cuáles son, en realidad, las ventajas de los dispositivos científicos usados en laboratorios escolares y en museos de ciencia interactivos, para el aprendizaje de las ciencias en los estudiantes? Un aprendizaje eficaz de las ciencias requiere comprensión. La generación de preguntas para obtener información es uno de los procesos que indican la intención de los estudiantes de comprender una determinada información. Además, la construcción de nuevo conocimiento científico comienza con una buena pregunta. Por tanto, estimular la generación de preguntas destinadas a obtener información (ISQ) podría ser un elemento que mejorara el aprendizaje profundo de las ciencias escolares

Silicon Chips and Nano Devices

A look at the Southampton Nanfabrication Centre where electro-photonic research is carried out and the AMD company's industrial processes for creating commercial quantities of silicon computing devices.

Teleconsultation in sexual and reproductive health for young adults through mobile devices: Experience in Colombia

Background: Sexual risk behaviors associated with poor information on sexuality have contributed to major public health problems in the area of sexual and reproductive health in teenagers and young adults in Colombia. Objective: To measure the perception of changes in sexual and reproductive risk behavior after the use of a teleconsultation service via mobile devices in a sample of young adults. Methods: A before and after observational study was designed, where a mobile application to inquire about sexual and reproductive health was developed. The perception of changes in sexual and reproductive health risk behaviors in a sample of young adults after the use of the application was measured using the validated survey “Family Health International (FHI) – Behavioral Surveillance Survey (BSS) – Survey for Adults between 15 to 40 Years”. Non-probabilistic convenience recruitment was undertaken through the study´s web page. Participants answered the survey online before and after the use of the mobile application for a six month period (intervention). For the inferential analysis, data was divided into three groups (dichotomous data, discrete quantitative data, and ordinal data), to compare the results of the questions between the first and the second survey. For all tests, a confidence interval of 95% was established. For dichotomous data, the Chi-squared test was used. For quantitative data, we used the Student’s t-test, and for ordinal data, the Mann-Whitney-Wilcoxon test. Results: A total of 257 subjects were registered in the study and met the selection criteria. The pre-intervention survey was answered by 232 subjects, and 127 completely answered the post-intervention survey, of which 54.3% did not use the application, leaving an effective population of 58 subjects for analysis. 53% (n=31) were female, and 47% (n=27) were male. The mean age was 21 years, ranging between 18 and 40 years. The differences between the answers on the first and the second survey were not statistically significant. The main risk behaviors identified in the population were homosexual relations, non-use of condoms, sexual relations with non-regular and commercial partners, the use of psychoactive substances, and ignorance about the symptoms of sexually transmitted diseases and HIV transmission. Conclusions: Although there were no differences between the pre- and post-intervention results, the study revealed different risk behaviors among the participating subjects. These findings highlight the importance of promoting educational strategies on this matter and the importance of providing patients with easily accessible tools with reliable health information.

Understanding mobile learning : devices, pedagogical implications and research lines

Resumen basado en el de la publicaci??n

Development of a historic hearing devices exhibit

This paper discusses historic hearing devices and their benefits to users.

Training hearing impaired consumer advocates of assistive listening devices

This paper contains a manual for training advocates of assistive listening devices.

Teaching deaf children how to use telecommunication devices for the deaf

This paper discusses the use of telecommunication devices for the deaf (TDD) and teaching children how to use such devices.

A consumer survey designed to identify attitudes, knowledge, acceptance, and use of assistive listening devices in public facilities

This paper presents a consumer survey of hearing-impaired persons used to identify their attitudes, knowledge, acceptance, and use of assistive listening devices in public facilities.

Stapling and Energy Devices

PowerPoint presentation on electrosurgery and surgical stapling

A double data rate (DDR) architecture for OFDM based wireless consumer devices

The creation of OFDM based Wireless Personal Area Networks (WPANs) has allowed the development of high bit-rate wireless communication devices suitable for streaming High Definition video between consumer products, as demonstrated in Wireless-USB and Wireless-HDMI. However, these devices need high frequency clock rates, particularly for the OFDM, FFT and symbol processing sections resulting in high silicon cost and high electrical power. The high clock rates make hardware prototyping difficult and verification is therefore very important but costly. Acknowledging that electrical power in wireless consumer devices is more critical than the number of implemented logic gates, this paper presents a Double Data Rate (DDR) architecture for implementation inside a OFDM baseband codec in order to reduce the high frequency clock rates by a complete factor of 2. The presented architecture has been implemented and tested for ECMA-368 (Wireless- USB context) resulting in a maximum clock rate of 264MHz instead of the expected 528MHz clock rate existing anywhere on the baseband codec die.

A double data rate (DDR) architecture for OFDM based wireless consumer devices

The creation of OFDM based Wireless Personal Area Networks (WPANs) has allowed high bit-rate wireless communication devices suitable for streaming High Definition video between consumer products as demonstrated in Wireless- USB. However, these devices need high clock rates, particularly for the OFDM sections resulting in high silicon cost and high electrical power. Acknowledging that electrical power in wireless consumer devices is more critical than the number of implemented logic gates, this paper presents a Double Data Rate (DDR) architecture to reduce the OFDM input and output clock rate by a factor of 2. The architecture has been implemented and tested for Wireless-USB (ECMA-368) resulting in a maximum clock of 264MHz instead of 528MHz existing anywhere on the die.