Eco-efficiency approaches towards a sustainable composite materials manufacturing industry’

In this study the potential eco-efficiency performance of a pultrusion manufacturing company was assessed. Indicators values and eco-efficiency ratios were estimated taking into account the implementation of new proceedings and procedures in the production process of glass fibre reinforced polymers (GFRP) pultrusion profiles. Two different approaches were foreseen: 1)Adoption of a new heating system for pultrusion die in the manufacturing process, more effective and with minor heat losses; and 2) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

Occupational risk in a glass manufacturing industry unit

Risk assessment is one of the main pillars of the framework directive and other directives in respect of health and safety. It is also the basis of an effective management of safety and health as it is essential to reduce work-related accidents and occupational diseases. To survey the hazards eventually present in the workplaces the usual procedures are i) gathering information about tasks/activities, employees, equipment, legislation and standards; ii) observation of the tasks and; iii) quantification of respective risks through the most adequate risk assessment among the methodologies available. From this preliminary evaluation of a welding plant and, from the different measurable parameters, noise was considered the most critical. This paper focus not only the usual way of risk assessment for noise but also another approach that may allow us to identify the technique with which a weld is being performed.

Spectral solution for the air stripping pollutants removal dynamic model with non linear steady state conditions

This work deals with the numerical simulation of air stripping process for the pre-treatment of groundwater used in human consumption. The model established in steady state presents an exponential solution that is used, together with the Tau Method, to get a spectral approach of the solution of the system of partial differential equations associated to the model in transient state.

Fast mobility support in low-power wireless networks: smart-HOP over RPL/6LoWPAN

With the emergence of low-power wireless hardware new ways of communication were needed. In order to standardize the communication between these low powered devices the Internet Engineering Task Force (IETF) released the 6LoWPAN stand- ard that acts as an additional layer for making the IPv6 link layer suitable for the lower-power and lossy networks. In the same way, IPv6 Routing Protocol for Low- Power and Lossy Networks (RPL) has been proposed by the IETF Routing Over Low power and Lossy networks (ROLL) Working Group as a standard routing protocol for IPv6 routing in low-power wireless sensor networks. The research performed in this thesis uses these technologies to implement a mobility process. Mobility management is a fundamental yet challenging area in low-power wireless networks. There are applications that require mobile nodes to exchange data with a xed infrastructure with quality-of-service guarantees. A prime example of these applications is the monitoring of patients in real-time. In these scenarios, broadcast- ing data to all access points (APs) within range may not be a valid option due to the energy consumption, data storage and complexity requirements. An alternative and e cient option is to allow mobile nodes to perform hand-o s. Hand-o mechanisms have been well studied in cellular and ad-hoc networks. However, low-power wireless networks pose a new set of challenges. On one hand, simpler radios and constrained resources ask for simpler hand-o schemes. On the other hand, the shorter coverage and higher variability of low-power links require a careful tuning of the hand-o parameters. In this work, we tackle the problem of integrating smart-HOP within a standard protocol, speci cally RPL. The simulation results in Cooja indicate that the pro- posed scheme minimizes the hand-o delay and the total network overhead. The standard RPL protocol is simply unable to provide a reliable mobility support sim- ilar to other COTS technologies. Instead, they support joining and leaving of nodes, with very low responsiveness in the existence of physical mobility.

Geography of the Information Society

All every day activities take place in space. And it is upon this that all information and knowledge revolve. The latter are the key elements in the organisation of territories. Their creation, use and distribution should therefore occur in a balanced way throughout the whole territory in order to allow all individuals to participate in an egalitarian society, in which the flow of knowledge can take precedence over the flow of interests. The information society depends, to a large extent, on the technological capacity to disseminate information and, consequently, the knowledge throughout territory, thereby creating conditions which allow a more balanced development, from the both the social and economic points of view thus avoiding the existence of info-exclusion territories. Internet should therefore be considered more than a mere technology, given that its importance goes well beyond the frontiers of culture and society. It is already a part of daily life and of the new forms of thinking and transmitting information, thus making it a basic necessity essential, for a full socio-economic development. Its role as a platform of creation and distribution of content is regarded as an indispensable element for education in today’s society, since it makes information a much more easily acquired benefit.”…in the same way that the new technologies of generation and distribution of energy allowed factories and large companies to establish themselves as the organisational bases of industrial society, so the internet today constitutes the technological base of the organisational form that characterises the Information Era: the network” (CASTELLS, 2004:15). The changes taking place today in regional and urban structures are increasingly more evident due to a combination of factors such as faster means of transport, more efficient telecommunications and other cheaper and more advanced technologies of information and knowledge. Although their impact on society is obvious, society itself also has a strong influence on the evolution of these technologies. And although physical distance has lost much of the responsibility it had towards explaining particular phenomena of the economy and of society, other aspects such as telecommunications, new forms of mobility, the networks of innovation, the internet, cyberspace, etc., have become more important, and are the subject of study and profound analysis. The science of geographical information, allows, in a much more rigorous way, the analysis of problems thus integrating in a much more balanced way, the concepts of place, of space and of time. Among the traditional disciplines that have already found their place in this process of research and analysis, we can give special attention to a geography of new spaces, which, while not being a geography of ‘innovation’, nor of the ‘Internet’, nor even ‘virtual’, which can be defined as one of the ‘Information Society’, encompassing not only the technological aspects but also including a socio-economic approach. According to the last European statistical data, Portugal shows a deficit in terms of information and knowledge dissemination among its European partners. Some of the causes are very well identified - low levels of scholarship, weak investments on innovation and R&D (both private and public sector) - but others seem to be hidden behind socio-economical and technological factors. So, the justification of Portugal as the case study appeared naturally, on a difficult quest to find the major causes to territorial asymmetries. The substantial amount of data needed for this work was very difficult to obtain and for the islands of Madeira and Azores was insufficient, so only Continental Portugal was considered for this study. In an effort to understand the various aspects of the Geography of the Information Society and bearing in mind the increasing generalised use of information technologies together with the range of technologies available for the dissemination of information, it is important to: (i) Reflect on the geography of the new socio-technological spaces. (ii) Evaluate the potential for the dissemination of information and knowledge through the selection of variables that allow us to determine the dynamic of a given territory or region; (iii) Define a Geography of the Information Society in Continental Portugal.

An implementation of dynamic fully compressed suffix trees

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Informática

Scale-free networks and scalable interdomain routing

Trabalho apresentado no âmbito do Mestrado em Engenharia Informática, como requisito parcial para obtenção do grau de Mestre em Engenharia Informática

MASS CONSERVATION ENHANCEMENT OF FREE BOUNDARY FLOWS IN COMPOSITES MANUFACTURING

Undesirable void formation during the injection phase of the liquid composite molding process can be understood as a consequence of the non-uniformity of the flow front progression, caused by the dual porosity of the fiber perform. Therefore the best examination of the void formation physics can be provided by a mesolevel analysis, where the characteristic dimension is given by the fiber tow diameter. In mesolevel analysis, liquid impregnation along two different scales; inside fiber tows and within the spaces between them; must be considered and the coupling between these flow regimes must be addressed. In such case, it is extremely important to account correctly for the surface tension effects, which can be modeled as capillary pressure applied at the flow front. When continues Galerkin method is used, exploiting elements with velocity components and pressure as nodal variables, strong numerical implementation of such boundary conditions leads to ill-posing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. This article presents a numerical procedure, which was formulated and implemented in the existing Free Boundary Program in order to significantly reduce this error.

Mass Conservation Enhancement of Free Boundary Mesolevel Flows during LCM Processes of Composites Manufacturing

Undesirable void formation during the injection phase of the liquid composite moulding process can be understood as a consequence of the non-uniformity of the flow front progression, caused by the dual porosity of the fibre perform. Therefore the best examination of the void formation physics can be provided by a mesolevel analysis, where the characteristic dimension is given by the fibre tow diameter. In mesolevel analysis, liquid impregnation along two different scales; inside fibre tows and within the open spaces between them; must be considered and the coupling between these flow regimes must be addressed. In such case, it is extremely important to account correctly for the surface tension effects, which can be modelled as capillary pressure applied at the flow front. Numerical implementation of such boundary conditions leads to ill-posing of the problem, in terms of the weak classical as well as stabilized formulation. As a consequence, there is an error in mass conservation accumulated especially along the free flow front. This contribution presents a numerical procedure, which was formulated and implemented in the existing Free Boundary Program in order to significantly reduce this error.

Internet Geography: New Spaces of Information

The objective of great investments in telecommunication networks is to approach economies and put an end to the asymmetries. The most isolated regions could be the beneficiaries of this new technological investments wave disseminating trough the territories. The new economic scenarios created by globalisation make high capacity backbones and coherent information society polity, two instruments that could change regions fate and launch them in to an economic development context. Technology could bring international projection to services or products and could be the differentiating element between a national and an international economic strategy. So, the networks and its fluxes are becoming two of the most important variables to the economies. Measuring and representing this new informational accessibility, mapping new communities, finding new patterns and localisation models, could be today’s challenge. In the physical and real space, location is defined by two or three geographical co-ordinates. In the network virtual space or in cyberspace, geography seems incapable to define location, because it doesn’t have a good model. Trying to solve the problem and based on geographical theories and concepts, new fields of study came to light. The Internet Geography, Cybergeography or Geography of Cyberspace are only three examples. In this paper and using Internet Geography and informational cartography, it was possible to observe and analyse the spacialisation of the Internet phenomenon trough the distribution of the IP addresses in the Portuguese territory. This work shows the great potential and applicability of this indicator to Internet dissemination and regional development studies. The Portuguese territory is seen in a completely new form: the IP address distribution of Country Code Top Level Domains (.pt) could show new regional hierarchies. The spatial concentration or dispersion of top level domains seems to be a good instrument to reflect the info-structural dynamic and economic development of a territory, especially at regional level.

Internet Geography: Spaces of Innovation

Information Society plays an important role in all kinds of human activity, inducing new forms of economic and social organization and creating knowledge. Over the last twenty years of the 20th century, large investments in telecommunication networks were made to approach economies and put an end to the asymmetries. The most isolated regions were the beneficiaries of this new technological investment’s wave disseminating trough the territories. The new economic scenarios created by globalisation make high capacity backbones and coherent information society polity, two instruments that could change regions fate and launch them in to an economic development context. Technology could bring international projection to services, products and could be the differentiating element between a national and an international economic strategy. So, the networks and its fluxes are becoming two of the most important variables to the economies. Measuring and representing this new informational accessibility, mapping new communities, finding new patterns and localisation models, could be today’s challenge. In the physical/real space, location is defined by two or three geographical co-ordinates. In the network/virtual space or in cyberspace, geography seems incapable to define location, because it doesn’t have a good model. Trying to solve the problem and based on geographical theories and concepts, new fields of study came to light. Internet Geography is one example. In this paper and using Internet Geography and informational cartography, it was possible to observe and analyse the spacialisation of the Internet phenomenon trough the distribution of the IP addresses in the Portuguese territory. This work shows the great potential and applicability of this indicator to regional development studies, and at the same time. The IP address distribution of Country Code Top Level Domains (.pt for Portugal) could show the same economic patterns, reflecting territorial inflexibility or, by opposition, new regional hierarchies. The spatial concentration or dispersion of top level domains seems to be a good instrument to analyse the info-structural dynamic and economic development of a territory, especially at regional level. At the same time it shows that information technologies are essential to innovation and competitive advantage.

Cities and emerging networks of learning communities

In the 21st century the majority of people live in urban settings and studies show a trend to the increase of this phenomenon. Globalisation and the concentration of multinational and clusters of firms in certain places are attracting people who seek employment and a better living. Many of those agglomerations are situated in developing countries, representing serious challenges both for public and private sectors. Programmes and initiatives in different countries are taking place and best practices are being exchanged globally. The objective is to transform these urban places into sustainable learning cities/regions where citizens can live with quality. The complexity of urban places, sometimes megacities, opened a new field of research. This paper argues that in order to understand the dynamics of such a complex phenomenon, a multidisciplinary, systemic approach is needed and the creation of learning cities and regions calls for the contribution of a multitude of fields of knowledge, ranging from economy to urbanism, educational science, sociology, environmental psychology and others.

Consistency and Context Management in a Multi Agent Belief Revision Testbed

Multi-agent architectures are well suited for complex inherently distributed problem solving domains. From the many challenging aspects that arise within this framework, a crucial one emerges: how to incorporate dynamic and conflicting agent beliefs? While the belief revision activity in a single agent scenario is concentrated on incorporating new information while preserving consistency, in a multi-agent system it also has to deal with possible conflicts between the agents perspectives. To provide an adequate framework, each agent, built as a combination of an assumption based belief revision system and a cooperation layer, was enriched with additional features: a distributed search control mechanism allowing dynamic context management, and a set of different distributed consistency methodologies. As a result, a Distributed Belief Revision Testbed (DiBeRT) was developed. This paper is a preliminary report presenting some of DiBeRT contributions: a concise representation of external beliefs; a simple and innovative methodology to achieve distributed context management; and a reduced inter-agent data exchange format.