A double-blind comparison of the effect of the antipsychotics haloperidol and olanzapine on sleep in mania

The effects of haloperidol and olanzapine on polysomnographic measures made in bipolar patients during manic episodes were compared. Twelve DSM-IV mania patients were randomly assigned to receive either haloperidol (mean ± SD final dosage: 5.8 ± 3.8 mg) or olanzapine (mean ± SD final dosage: 13.6 ± 6.9 mg) in a 6-week, double-blind, randomized, controlled clinical trial. One-night polysomnographic evaluation was performed before and after the haloperidol or olanzapine treatment. Psychopathology and illness severity were rated respectively with the Young Mania Rating Scale (YMRS) and the Clinical Global Impressions - Bipolar version (CGI-BP). There was a significant improvement in the YMRS and CGI-BP scores at the end of the study for both groups. Mixed ANOVA used to compare the polysomnographic measures of both drugs demonstrated significant improvement in sleep measures with olanzapine. In the olanzapine group, statistically significant time-drug interaction effects on sleep continuity measures were observed: sleep efficiency (mean ± SEM pre-treatment value: 6.7 ± 20.3%; after-treatment: 85.7 ± 10.9%), total wake time (pre-treatment: 140.0 ± 92.5 min; after-treatment: 55.2 ± 44.2 min), and wake time after sleep onset (pre-treatment: 109.7 ± 70.8 min; after-treatment: 32.2 ± 20.7 min). Conversely, improvement of polysomnographic measures was not observed for the haloperidol group (P > 0.05). These results suggest that olanzapine is more effective than haloperidol in terms of sleep-promoting effects, although olanzapine is comparatively as effective as haloperidol in treating mania. Polysomnography records should provide useful information on how manic states can be affected by psychopharmacological agents.

Modular Double-Cascade Converter

Medium-voltage motor drives extend the power rating of AC motor drives in industrial applications. Multilevel converters are gaining an ever-stronger foothold in this field. This doctoral dissertation introduces a new topology to the family of modular multilevel converters: the modular double-cascade converter. The modularity of the converter is enabled by the application of multiwinding mediumfrequency isolation transformers. Owing to the innovative transformer link, the converter presents many advantageous properties at a concept level: modularity, high input and output power quality, small footprint, and wide variety of applications, among others. Further, the research demonstrates that the transformer link also plays a key role in the disadvantages of the topology. An extensive simulation study on the new converter is performed. The focus of the simulation study is on the development of control algorithms and the feasibility of the topology. In particular, the circuit and control concepts used in the grid interface, the coupling configurations of the load inverter, and the transformer link operation are thoroughly investigated. Experimental results provide proof-of-concept results on the operation principle of the converter. This work concludes a research collaboration project on multilevel converters between LUT and Vacon Plc. The project was active from 2009 until 2014.

Matching salt intake to physiological need in rats using foraging protocols

Several studies of the quantitative relationship between sodium need and sodium intake in rats are reviewed. Using acute diuretic treatment 24 h beforehand, intake matches need fairly accurately when intake is spread out in time by using a hypotonic solution of NaCl. In contrast, using a hypertonic solution, intake is typically double the need. Using the same diuretic treatment, although the natriuresis occurs within ~1 h, the appetite appears only slowly over 24 h. Increased plasma levels of aldosterone parallel the increased intake; however, treatment with metyrapone blocks the rise in aldosterone but has no effect on appetite. Satiation of sodium appetite was studied in rats using sodium loss induced by chronic diuretic treatment and daily salt consumption sessions. When a simulated foraging cost was imposed on NaCl access in the form of a progressive ratio lever press task, rats showed satiation for NaCl (break point) after consuming an amount close to their estimated deficit. The chronic diuretic regimen produced hypovolemia and large increases in plasma aldosterone concentration and renin activity. These parameters were reversed to or toward non-depleted control values at the time of behavioral satiation in the progressive ratio protocol. Satiation mechanisms for sodium appetite thus do appear to exist. However, they do not operate quantitatively when concentrated salt is available at no effort, but instead allow overconsumption. There are reasons to believe that such a bias toward overconsumption may have been beneficial over evolutionary time, but such biasing for salt and other commodities is maladaptive in a resource-rich environment.

Water deprivation and the double- depletion hypothesis: common neural mechanisms underlie thirst and salt appetite

Water deprivation-induced thirst is explained by the double-depletion hypothesis, which predicts that dehydration of the two major body fluid compartments, the extracellular and intracellular compartments, activates signals that combine centrally to induce water intake. However, sodium appetite is also elicited by water deprivation. In this brief review, we stress the importance of the water-depletion and partial extracellular fluid-repletion protocol which permits the distinction between sodium appetite and thirst. Consistent enhancement or a de novo production of sodium intake induced by deactivation of inhibitory nuclei (e.g., lateral parabrachial nucleus) or hormones (oxytocin, atrial natriuretic peptide), in water-deprived, extracellular-dehydrated or, contrary to tradition, intracellular-dehydrated rats, suggests that sodium appetite and thirst share more mechanisms than previously thought. Water deprivation has physiological and health effects in humans that might be related to the salt craving shown by our species.

Plan karta öfver de ställen i närheten af Willmanstrand, der spår förekomma efter en påbörjad genomgräfning af Saimas strand-ås, för att förena Saima med Juustila å.

Alareunassa kanavan pituus- ja korkeusmittakaavaan piirretty sivuprofiili: Profil öfver det ställe af Saima strand-ås, der spår förekomma af en äldre kanalgräfning (detta ställe benämnes: Pontuksen uusi kaiwando).

[Topografičeskaâ karta 1:42000]. XIII-45, XIII-46, XII-45, XII-46, Vyborg. gub., Vil'manstr., Kûmen. i Strand. uěz.

1:42000.

A bovine herpesvirus 5 recombinant defective in the thymidine kinase (TK) gene and a double mutant lacking TK and the glycoprotein E gene are fully attenuated for rabbits

Bovine herpesvirus 5 (BoHV-5), the agent of herpetic meningoencephalitis in cattle, is an important pathogen of cattle in South America and several efforts have been made to produce safer and more effective vaccines. In the present study, we investigated in rabbits the virulence of three recombinant viruses constructed from a neurovirulent Brazilian BoHV-5 strain (SV507/99). The recombinants are defective in glycoprotein E (BoHV-5gEΔ), thymidine kinase (BoHV-5TKΔ) and both proteins (BoHV-5gEΔTKΔ). Rabbits inoculated with the parental virus (N = 8) developed neurological disease and died or were euthanized in extremis between days 7 and 13 post-infection (pi). Infectivity was detected in several areas of their brains. Three of 8 rabbits inoculated with the recombinant BoHV-5gEΔ developed neurological signs between days 10 and 15 pi and were also euthanized. A more restricted virus distribution was detected in the brain of these animals. Rabbits inoculated with the recombinants BoHV-5TKΔ (N = 8) or BoHV-5gEΔTKΔ (N = 8) remained healthy throughout the experiment in spite of variable levels of virus replication in the nose. Dexamethasone (Dx) administration to rabbits inoculated with the three recombinants at day 42 pi did not result in viral reactivation, as demonstrated by absence of virus shedding and/or increase in virus neutralizing titers. Nevertheless, viral DNA was detected in the trigeminal ganglia or olfactory bulbs of all animals at day 28 post-Dx, demonstrating they were latently infected. These results show that recombinants BoHV-5TKΔ and BoHV-5gEΔTKΔ are attenuated for rabbits and constitute potential vaccine candidates upon the confirmation of this phenotype in cattle.

Effects of isoflavone on the learning and memory of women in menopause: a double-blind placebo-controlled study

Hormone decline is common to all women during aging and, associated with other factors, leads to cognitive impairment. Its replacement enhances cognitive performance, but not all women present a clinical and family or personal history that justifies its use, mainly women with a history of cancer. The aim of this study was to determine whether a daily oral dose of 80 mg of isoflavone extract for 4 months can produce benefits in women with low hormone levels, contributing to improvement in cognitive aspects. The sample comprised 50- to 65-year-old women whose menstruation had ceased at least 1 year before and who had not undergone hormone replacement. The volunteers were allocated to two groups of 19 individuals each, i.e., isoflavone and placebo. There was a weak correlation between menopause duration and low performance in the capacity to manipulate information (central executive). We observed an increase in the capacity to integrate information in the group treated with isoflavone, but no improvement in the capacity to form new memories. We did not observe differences between groups in terms of signs and symptoms suggestive of depression according to the Geriatric Depression Scale. Our results point to a possible beneficial effect of isoflavone on some abilities of the central executive. These effects could also contribute to minimizing the impact of memory impairment. Further research based on controlled clinical trials is necessary to reach consistent conclusions.

Effects of conventional vs high-dose rocuronium on the QTc interval during anesthesia induction and intubation in patients undergoing coronary artery surgery: a randomized, double-blind, parallel trial

Myocardial ischemia, as well as the induction agents used in anesthesia, may cause corrected QT interval (QTc) prolongation. The objective of this randomized, double-blind trial was to determine the effects of high- vs conventional-dose bolus rocuronium on QTc duration and the incidence of dysrhythmias following anesthesia induction and intubation. Fifty patients about to undergo coronary artery surgery were randomly allocated to receive conventional-dose (0.6 mg/kg, group C, n=25) or high-dose (1.2 mg/kg, group H, n=25) rocuronium after induction with etomidate and fentanyl. QTc, heart rate, and mean arterial pressure were recorded before induction (T0), after induction (T1), after rocuronium (just before laryngoscopy; T2), 2 min after intubation (T3), and 5 min after intubation (T4). The occurrence of dysrhythmias was recorded. In both groups, QTc was significantly longer at T3 than at baseline [475 vs 429 ms in group C (P=0.001), and 459 vs 434 ms in group H (P=0.005)]. The incidence of dysrhythmias in group C (28%) and in group H (24%) was similar. The QTc after high-dose rocuronium was not significantly longer than after conventional-dose rocuronium in patients about to undergo coronary artery surgery who were induced with etomidate and fentanyl. In both groups, compared with baseline, QTc was most prolonged at 2 min after intubation, suggesting that QTc prolongation may be due to the nociceptive stimulus of intubation.

Feasibility of industrial implementation of laser cutting into paper making machine

Laser cutting implementation possibilities into paper making machine was studied as the main objective of the work. Laser cutting technology application was considered as a replacement tool for conventional cutting methods used in paper making machines for longitudinal cutting such as edge trimming at different paper making process and tambour roll slitting. Laser cutting of paper was tested in 70’s for the first time. Since then, laser cutting and processing has been applied for paper materials with different level of success in industry. Laser cutting can be employed for longitudinal cutting of paper web in machine direction. The most common conventional cutting methods include water jet cutting and rotating slitting blades applied in paper making machines. Cutting with CO2 laser fulfils basic requirements for cutting quality, applicability to material and cutting speeds in all locations where longitudinal cutting is needed. Literature review provided description of advantages, disadvantages and challenges of laser technology when it was applied for cutting of paper material with particular attention to cutting of moving paper web. Based on studied laser cutting capabilities and problem definition of conventional cutting technologies, preliminary selection of the most promising application area was carried out. Laser cutting (trimming) of paper web edges in wet end was estimated to be the most promising area where it can be implemented. This assumption was made on the basis of rate of web breaks occurrence. It was found that up to 64 % of total number of web breaks occurred in wet end, particularly in location of so called open draws where paper web was transferred unsupported by wire or felt. Distribution of web breaks in machine cross direction revealed that defects of paper web edge was the main reason of tearing initiation and consequent web break. The assumption was made that laser cutting was capable of improvement of laser cut edge tensile strength due to high cutting quality and sealing effect of the edge after laser cutting. Studies of laser ablation of cellulose supported this claim. Linear energy needed for cutting was calculated with regard to paper web properties in intended laser cutting location. Calculated linear cutting energy was verified with series of laser cutting. Practically obtained laser energy needed for cutting deviated from calculated values. This could be explained by difference in heat transfer via radiation in laser cutting and different absorption characteristics of dry and moist paper material. Laser cut samples (both dry and moist (dry matter content about 25-40%)) were tested for strength properties. It was shown that tensile strength and strain break of laser cut samples are similar to corresponding values of non-laser cut samples. Chosen method, however, did not address tensile strength of laser cut edge in particular. Thus, the assumption of improving strength properties with laser cutting was not fully proved. Laser cutting effect on possible pollution of mill broke (recycling of trimmed edge) was carried out. Laser cut samples (both dry and moist) were tested on the content of dirt particles. The tests revealed that accumulation of dust particles on the surface of moist samples can take place. This has to be taken into account to prevent contamination of pulp suspension when trim waste is recycled. Material loss due to evaporation during laser cutting and amount of solid residues after cutting were evaluated. Edge trimming with laser would result in 0.25 kg/h of solid residues and 2.5 kg/h of lost material due to evaporation. Schemes of laser cutting implementation and needed laser equipment were discussed. Generally, laser cutting system would require two laser sources (one laser source for each cutting zone), set of beam transfer and focusing optics and cutting heads. In order to increase reliability of system, it was suggested that each laser source would have double capacity. That would allow to perform cutting employing one laser source working at full capacity for both cutting zones. Laser technology is in required level at the moment and do not require additional development. Moreover, capacity of speed increase is high due to availability high power laser sources what can support the tendency of speed increase of paper making machines. Laser cutting system would require special roll to maintain cutting. The scheme of such roll was proposed as well as roll integration into paper making machine. Laser cutting can be done in location of central roll in press section, before so-called open draw where many web breaks occur, where it has potential to improve runability of a paper making machine. Economic performance of laser cutting was done as comparison of laser cutting system and water jet cutting working in the same conditions. It was revealed that laser cutting would still be about two times more expensive compared to water jet cutting. This is mainly due to high investment cost of laser equipment and poor energy efficiency of CO2 lasers. Another factor is that laser cutting causes material loss due to evaporation whereas water jet cutting almost does not cause material loss. Despite difficulties of laser cutting implementation in paper making machine, its implementation can be beneficial. The crucial role in that is possibility to improve cut edge strength properties and consequently reduce number of web breaks. Capacity of laser cutting to maintain cutting speeds which exceed current speeds of paper making machines what is another argument to consider laser cutting technology in design of new high speed paper making machines.

Analysis of PACTEL small break LOCA experiment using TRACE

A small break loss-of-coolant accident (SBLOCA) is one of problems investigated in an NPP operation. Such accident can be analyzed using an experiment facility and TRACE thermal-hydraulic system code. A series of SBLOCA experiments was carried out on Parallel Channel Test Loop (PACTEL) facility, exploited together with Technical Research Centre of Finland VTT Energy and Lappeenranta University of Technology (LUT), in order to investigate two-phase phenomena related to a VVER-type reactor. The experiments and a TRACE model of the PACTEL facility are described in the paper. In addition, there is the TRACE code description with main field equations. At the work, calculations of a SBLOCA series are implemented and after the calculations, the thesis discusses the validation of TRACE and concludes with an assessment of the usefulness and accuracy of the code in calculating small breaks.

Chemical profile of sugarcane spirits produced by double distillation methodologies in rectifying still

The objective of this study was to determine the chemical profile of sugarcane spirits produced by different double distillation methodologies in rectifying still. Fermented sugarcane juice was distilled in rectifying still according to three double distillation methodologies: the methodology used for cognac production; the methodology used for whisky production; and the 10-80-10 percentage composition methodology, referring to the volumes of head, heart and tail of the distillate fractions from the second distillation. For comparison purposes, a simple distilled spirit was also produced. The distillates were analyzed for concentrations of ethanol, copper, volatile acidity, furfural and hydroxymethylfurfural, aldehydes, esters, methanol and higher alcohols. The spirits were also evaluated on the sensory attributes of aroma, taste and preference. Compared to simple distillation, double distillation improved the chemical quality of the spirits, since it has reduced the concentrations of acids, aldehydes, esters, methanol, higher alcohols and, consequently, their coefficient of congeners. Regardless of the methodology employed, the double distillation improved the sensory quality of the spirits since they obtained higher sensory acceptance in relation to spirits produced by simple distillation. Among double distilled spirits, the one produced according to whisky methodology obtained the best scores from appraisers on the aroma and flavor parameters and it was also the most preferred.

Effects of grape powder supplementation on inflammatory and antioxidant markers in hemodialysis patients: A randomized double-blind study

Introduction: Polyphenols contained in natural sources such as grapes, have been considered pharmacological agents to combat oxidative stress and inflammation, common features in Chronic Kidney Disease patients. Objective: To evaluate the effects of grape powder supplementation on inflammatory and antioxidant biomarkers in hemodialysis (HD) patients. Methods: The double-blind placebo-controlled randomized clinical trial evaluated non-diabetic HD patients that received grape powder (500 mg of polyphenols/day) (n = 16, 9 men, 53.0 ± 9.8 years of age, 111.6 ± 58.2 HD months) or placebo (n = 16, 9 men, 52.7 ± 13.7 years of age, 110.4 ± 93.1 HD months) for five weeks. The glutathione peroxidase (GSH-Px) activity and C-reactive protein (CRP) levels were evaluated by ELISA method. Results: After the intervention period, the patients receiving grape powder showed an increase in the GSH-Px activity (16.5 (41.0) to 42.0 (43.3) nmol/min/ml) (p < 0.05) and they did not have the CRP levels increased as seen in placebo group (2.6 (0.28) to 2.8 (0.23 mg/L) (p < 0.05). Conclusion: The use of grape powder as phenolic source could play an important role as an antioxidant and anti-inflammatory agent in non-diabetic HD patients.

Analysis of PWR-PACTEL Small Break LOCA experiment using TRACE

Currently, the power generation is one of the most significant life aspects for the whole man-kind. Barely one can imagine our life without electricity and thermal energy. Thus, different technologies for producing those types of energy need to be used. Each of those technologies will always have their own advantages and disadvantages. Nevertheless, every technology must satisfy such requirements as efficiency, ecology safety and reliability. In the matter of the power generation with nuclear energy utilization these requirements needs to be highly main-tained, especially since accidents on nuclear power plants may cause very long term deadly consequences. In order to prevent possible disasters related to the accident on a nuclear power plant strong and powerful algorithms were invented in last decades. Such algorithms are able to manage calculations of different physical processes and phenomena of real facilities. How-ever, the results acquired by the computing must be verified with experimental data.

Recognition of nucleic acids by metal ion complexes

Metal-ion-mediated base-pairing of nucleic acids has attracted considerable attention during the past decade, since it offers means to expand the genetic code by artificial base-pairs, to create predesigned molecular architecture by metal-ion-mediated inter- or intra-strand cross-links, or to convert double stranded DNA to a nano-scale wire. Such applications largely depend on the presence of a modified nucleobase in both strands engaged in the duplex formation. Hybridization of metal-ion-binding oligonucleotide analogs with natural nucleic acid sequences has received much less attention in spite of obvious applications. While the natural oligonucleotides hybridize with high selectivity, their affinity for complementary sequences is inadequate for a number of applications. In the case of DNA, for example, more than 10 consecutive Watson-Crick base pairs are required for a stable duplex at room temperature, making targeting of sequences shorter than this challenging. For example, many types of cancer exhibit distinctive profiles of oncogenic miRNA, the diagnostics of which is, however, difficult owing to the presence of only short single stranded loop structures. Metallo-oligonucleotides, with their superior affinity towards their natural complements, would offer a way to overcome the low stability of short duplexes. In this study a number of metal-ion-binding surrogate nucleosides were prepared and their interaction with nucleoside 5´-monophosphates (NMPs) has been investigated by 1H NMR spectroscopy. To find metal ion complexes that could discriminate between natural nucleobases upon double helix formation, glycol nucleic acid (GNA) sequences carrying a PdII ion with vacant coordination sites at a predetermined position were synthesized and their affinity to complementary as well as mismatched counterparts quantified by UV-melting measurements.