Influence of multi-phase phenomena on semibatch crystallization processes of aqueous solutions

Crystal properties, product quality and particle size are determined by the operating conditions in the crystallization process. Thus, in order to obtain desired end-products, the crystallization process should be effectively controlled based on reliable kinetic information, which can be provided by powerful analytical tools such as Raman spectrometry and thermal analysis. The present research work studied various crystallization processes such as reactive crystallization, precipitation with anti-solvent and evaporation crystallization. The goal of the work was to understand more comprehensively the fundamentals, phenomena and utilizations of crystallization, and establish proper methods to control particle size distribution, especially for three phase gas-liquid-solid crystallization systems. As a part of the solid-liquid equilibrium studies in this work, prediction of KCl solubility in a MgCl2-KCl-H2O system was studied theoretically. Additionally, a solubility prediction model by Pitzer thermodynamic model was investigated based on solubility measurements of potassium dihydrogen phosphate with the presence of non-electronic organic substances in aqueous solutions. The prediction model helps to extend literature data and offers an easy and economical way to choose solvent for anti-solvent precipitation. Using experimental and modern analytical methods, precipitation kinetics and mass transfer in reactive crystallization of magnesium carbonate hydrates with magnesium hydroxide slurry and CO2 gas were systematically investigated. The obtained results gave deeper insight into gas-liquid-solid interactions and the mechanisms of this heterogeneous crystallization process. The research approach developed can provide theoretical guidance and act as a useful reference to promote development of gas-liquid reactive crystallization. Gas-liquid mass transfer of absorption in the presence of solid particles in a stirred tank was investigated in order to gain understanding of how different-sized particles interact with gas bubbles. Based on obtained volumetric mass transfer coefficient values, it was found that the influence of the presence of small particles on gas-liquid mass transfer cannot be ignored since there are interactions between bubbles and particles. Raman spectrometry was successfully applied for liquid and solids analysis in semi-batch anti-solvent precipitation and evaporation crystallization. Real-time information such as supersaturation, formation of precipitates and identification of crystal polymorphs could be obtained by Raman spectrometry. The solubility prediction models, monitoring methods for precipitation and empirical model for absorption developed in this study together with the methodologies used gives valuable information for aspects of industrial crystallization. Furthermore, Raman analysis was seen to be a potential controlling method for various crystallization processes.

Physicochemical study of CaCO3 from egg shells

Calcium carbonate, a pharmaceutical excipient, is widely used as diluent in solid dosage forms. It is also used as a base for medicinal and dental preparations, a buffering and dissolution aid for dispersible tablets, a food additive and a calcium supplement. Egg shells are a rich source of mineral salts, mainly calcium carbonate, which corresponds to about 94% of the shell. Layer farms produce large amounts of shells, whose final disposal poses a challenge from the environmental standpoint. This work was designed to evaluate the physicochemical and thermal properties of calcium carbonate obtained from egg shells. The findings indicated that calcium carbonate from egg shells can be used as an alternative pharmaceutical excipient.

Hardware design of a multiconverter for hybrid vehicle applications

Hybridiajoneuvosovellukset vaativat usein sekä korkea- että matalajännitejärjestelmän. Korkeajännitejärjestelmä sisältää yleensä energiavaraston, joka on joko superkondansaattori tai korkeajänniteakusto, dieselgeneraattorin tai range extenderin ja ajokäytön. Korkeajännitejärjestelmään liitetään usein myös erilaisia apukäyttöjä kuten kompressoreita ja hydraulipumppuja. Matalajännitejärjelmä koostuu yleensä ohjausyksiköistä, ajovaloista, yms. laitteista. Perinteisesti matalajännitejärjestelmää on syötetty dieselmoottorin laturista, mutta korkeajännitejärjestelmien myötä DC/DC-hakkurin käyttäminen korkea- ja matalajännitejärjestelmien välillä on herättänyt kiinnostusta, koska tällöin laturin voisi poistaa ja matalajänniteakustoa pienentää. Tässä työssä kuvatun monilähöisen tehonmuokkaimen invertterisilta soveltuu apukäyttöjen ajamiseen, ja erotettu DC/DC-hakkuri matalajännitejärjestelmän syöttämiseen. Tässä työssä käydään läpi edellä mainitun tehonmuokkaimen suunnittelu, keskittyen eritoten laitteen korkeajänniteosien mitoitukseen ja termiseen suunniteluun. DC/DC-hakkurin osalta perinteisiä piistä valmistettuja IGBT transistoreja vertaillaan piikarbidi MOSFET transistoreihin. Lämpömallilaskujen paikkaansapitävyyttä tutkitaan suorittamalla prototyyppilaitteelle hyötysuhdemittaus, jonka tuloksia verrataan laskettuihin tuloksiin. Lämpömallin parannusmahdollisuuksia käsitellään myös hyötysuhdemittauksen tulosten perusteella.

Essais en économie de l’environnement et des ressources naturelles sous incertitude

Cette thèse comprend trois essais en économie de l’environnement et des ressources naturelles sous incertitude. Le premier essai propose un modèle de jeu différentiel qui analyse la pollution globale à travers la quête à l’hégémonie politique entre pays. Le second essai utilise des données boursières pour estimer une version stochastique de la règle de Hotelling et ainsi inférer sur le rôle des ressources naturelles non renouvelables dans la diversification du risque. Le troisième essai montre comment la prise en compte des perspectives futures modifie la règle de Hotelling dans un contexte de diversification du risque.

Analyse génotypique des cellules initiatrices de tumeurs exprimant CD133 dans le neuroblastome

Le neuroblastome (NB) est la tumeur solide extracranienne la plus fréquente et mortelle chez les jeunes enfants. Il se caractérise par une résistance à la chimiothérapie possiblement en partie dû à la présence de cellules initiatrices de tumeurs (TICs). Des études ont mis en évidence le rôle de CD133 comme un marqueur des TICs dans divers types de cancers. Les buts de notre travail étaient d’abord de démontrer les vertus de TICs des cellules exprimant CD133 et ensuite, en utilisant une analyse globale du génome avec des polymorphismes nucléotidiques simples (SNPs), d’effectuer une analyse différentielle entre les TICs et les autres cellules du NB afin d’en identifier les anomalies génétiques spécifiques. Des lignées cellulaires de NB ont été triées par cytométrie de flux afin d’obtenir deux populations: une enrichie en CD133 (CD133high), l’autre faible en CD133 (CD133low). Afin de déterminer si ces populations cellulaires présentent des propriétés de TICs, des essais sur les neurosphères, les colonies en agar mou et les injections orthotopiques de 500 cellules sélectionnées dans 11 souris ont été réalisées. Après une isolation de l’ADN des populations sélectionnées, nous avons effectué une analyse génotypique par SNP utilisant les puces « Affymetrix Genome-Wide Human SNP Array 6.0 ». Pour vérifier l’expression des gènes identifiés, des Western Blots ont été réalisés. Nos résultats ont démontré que la population CD133 avait des propriétés de TICs in vitro et in vivo. L’analyse génotypique différentielle a permis d’identifier deux régions communes (16p13.3 and 19p13.3) dans la population CD133high ayant des gains et deux autres régions (16q12.1 and 21q21.3) dans la population CD133low possédant des pertes d’hétérozygoties (LOH). Aucune perte n’a été observée. Parmi les gènes étudiés, l’expression protéique d’éphrine-A2 était corrélée à celle de CD133 dans 6 tumeurs et 2 lignées cellulaires de NB. De plus, l’augmentation de la concentration d’anticorps anti-éphrine-A2 dans le milieu diminue la taille des neurosphères. Ainsi, la population CD133high, qui a des vertus de TICs, possède des caractéristiques génotypiques différentes par rapport à celle CD133low. La présence d’éphrine-A2 dans les cellules exprimant CD133 souligne son importance dans le développement des TICs. Ces résultats suggèrent la présence de potentielle cible pour de nouvelles thérapeutiques ciblant les TICs mise en évidence par l’étude génomique.

Studies On Supported Cobalt (Ii), Nickel (Ii) and Copper (Ii) Complexes Of O-Phenylenediamine and Schiff Bases Derived from 3-Hydroxyquinoxaline-2-Carboxaldehyde

The thesis deals with the synthesis, characterization and catalytic activity studies of supported cobalt(ii), nickel(II) and copper(II) complexes of O-phenylenediamine and Schiff bases derived from 3-hydroxyquinoxaline -2-carboxaldehyde. Zeolite encapsulation and polymer anchoring was employed for supporting the complexes. The characterization techniques proved that the encapsulation as well as polymer supporting has been successfully achieved. The catalytic activity studies revealed that the activities of the simple complexes are improved upon encapsulation. Various characterization techniques are used such as, chemical analysis, EPR, magnetic measurements, FTIR studies, thermal analysis, electronic spectra, XRD, SEM, surface area, and GC.The present study indicated that the that the mechanism of oxidation of catechol and DTBC by hydrogen peroxide is not altered by the change in the coordination sphere around the metal ion due to encapsulation. This fact suggests outer sphere mechanism for the reactions. The catalytic activity by zeolite encapsulated complex was found to be slower than that by the neat complex. The slowing down of the reaction in the zeolite case is probably due to the constraint imposed by the zeolite framework. The rate of DTBC ( 3,5-di-tert-butylchatechol)oxidation was found to be greater than the rate of catechol oxidation. This is obviously due to the presence of electron donating tertiary butyl groups.

A novel fluorescent bisazomethine dye derived from 3-hydroxyquinoxaline-2- carboxaldehyde and 2,3-diaminomaleonitrile

A novel bisazomethine Schiff base was synthesised by the condensation of 3-hydroxyquinoxaline-2- carboxaldehyde and 2,3-diaminomaleonitrile. 1H NMR, 13C NMR, HPLC and FT-IR studies revealed that the compound exists in two major tautomeric forms. The Schiff base exhibits positive absorption and fluorescent solvatochromism and displays dual fluorescence with large stoke shifts. Cyclic voltammetric analysis of the compound in 1:1 methanol–THF was influenced by scan rate. Thermal analysis of the compound was undertaken using TG–DTA and DSC

Catalysis by some metal oxides modified with phosphate ions

Surface acidity of phosphate modified La2O3,CeO2 and SnO2 has been estimated by titrimetric Method using Hammett Indicators.Mixed Oxides of tin and lanthanum have also been prepared and subjected to phosphate modification.Surface characterizartion of the samples has been carried out using XRD, surface area,thermal analysis and IR spectroscopy. Phosphate content in the samples has been chemically estimated. The catalytic activity for benzylation and esterification reaction has also been investigated.

Structural and catalytic investigation of vanadia supported on ceria promoted with high surface area rice husk silica

Rice husk silica was utilized as the promoter of ceria for preparing supported vanadia catalysts. Effect of vanadium content was investigated with 2–10 wt.% V2O5 loading over the support. Structural characterization of the catalysts was done by various techniques like energy dispersive X-ray (EDX), X-ray diffraction (XRD), BET surface area, thermal analysis (TGA/DTA), FT-infrared spectroscopy (FT-IR), UV–vis diffused reflectance spectroscopy (DR UV–vis), electron paramagnetic spectroscopy (EPR) and solid state magnetic resonance spectroscopies (29Si and 51V MASNMR). Catalytic activity was studied towards liquid-phase oxidation of benzene. Surface area of ceria enhanced upon rice husk silica promotion, thus makes dispersion of the active sites of vanadia easier. Highly dispersed vanadia was found for low V2O5 loading and formation of cerium orthovanadate (CeVO4) occurs as the loading increases. Spectroscopic investigation clearly confirms the formation of CeVO4 phase at higher loadings of V2O5. The oxidation activity increases with vanadia loading up to 8 wt.% V2O5, and further increase reduces the conversion rate. Selective formation of phenol can be attributed to the presence of highly dispersed active sites of vanadia over the support.

Synthesis, characterization and catalytic activity of Nd203 supported V205 catalysts

A series of rare-earth neodymia supported vanadium oxide catalysts with various V205 loadings ranging from 3 to 15 wt.% were prepared by the wet impregnation method using ammonium metavanadate as the vanadium precursor. The nature of vanadia species formed on the support surface is characterized hy a series of different physicochemical techniques like X-ray diffraction (XRD). Fourier transform infrared spectroscopy (FTIR). BET surface area, diffuse reflectance UV-vis spectroscopy (DR UV-vis), thermal analysis (TG-DTG/DTA) and SEM. The acidity of the prepared systems were verified by the stepwise temperature programmed desorprion of ammonia (NH3-TPD) and found that the total acidity gets increased with the percentage of vanadia loading. XRD and FT1R results shows the presence of surface dispersed vanadyl species at lower loadings and the formation of higher vanadate species as the percentage composition of vanadia is increased above 9 wt.%. The low surface area of the support. calcination temperature and the percentage of vanadia loading are found to influence the formation of higher vanadia species. The catalytic activity of the V205-Nd203 catalysts was probed in the liquid phase hydroxylation of phenol and the result show that the present catalysts are active at lower vanadia concentrations.

Aqueous Sol-gel Process for Nanocrystalline Photocatalytic Titania, Transparent Functional Coatings and Ceramic Membrane

The present thesis develops from the point of view of titania sol-gel chemistry and an attempt is made to address the modification of the process for better photoactive titania by selective doping and also demonstration of utilization of the process for the preparation of supported membranes and self cleaning films.A general introduction to nanomaterials, nanocrystalline titania and sol-gel chemistry are presented in the first chapter. A brief and updated literature review on sol-gel titania, with special emphasis on catalytic and photocatalytic properties and anatase to rutile transformation are covered. Based on critical assessment of the reported information the present research problem has been defined.The second chapter describes a new aqueous sol-gel method for the preparation of nanocrystalline titania using titanyl sulphate as precursor. This approach is novel since no earlier work has been reported in the same lines proposed here. The sol-gel process has been followed at each step using particle size, zeta potential measurements on the sol and thermal analysis of the resultant gel. The prepared powders were then characterized using X-ray diffraction, FTIR, BET surface area analysis and transmission electron microscopy.The third chapter presents a detailed discussion on the physico-chemical characterization of the aqueous sol-gel derived doped titania. The effect of dopants such as tantalum, gadolinium and ytterbium on the anatase to rutile phase transformation, surface area as well as their influence on photoactivity is also included. The fourth chapter demonstrates application of the aqueous sol-gel method in developing titania coatings on porous alumina substrates for controlling the poresize for use as membrane elements in ultrafiltration. Thin coatings having ~50 nm thickness and transparency of ~90% developed on glass surface were tested successfully for self cleaning applications.

Growth And Characterization Of Diammonium Hydrogen Citrate And Citric Acid Monohydrate Single Crystals

Over the past years there has been considerable interest in the growth of single crystals both from the point of view of basic research and technological application. With the revolutionary emergence of solid state electronics which is based on single crystal technolo8Ys basic and applied studies on crystal growth and characterization _have gained a-more significant role in material science. These studies are being carried out for single crystals not only of semiconductor and other electronic materials but also of metals and insulators. Many organic crystals belonging to the orthorhombic class exhibit ferroelectric, electrooptic, triboluminescent and piezoelectric properties. Diammonium Hydrogen Citrate (DAHC) crystals are reported to be piezoelectric and triboluminescent /1/. Koptsik et al. /2/ have reported the piezoelectric nature of Citric Acid Monohydrate (CA) crystals. And since not much work has been done on these crystals, it has been thought useful to grow and characterize these crystals. This thesis presents a study of the growth of these crystals from solution and their defect structures. The results of the microindentation and thermal analysis are presented. Dielectric, fractographic, infrared (IR) and ultraviolet (UV) studies of DAHC crystals are also reported

On structural, optical and dielectric properties of zinc aluminate nanoparticles

Zinc aluminate nanoparticles with average particle size of 40 nm were synthesized using a sol–gel combustion method. X-ray diffractometry result was analysed by Rietveld refinement method to establish the phase purity of the material. Different stages of phase formation of the material during the synthesis were investigated using differential scanning calorimetry and differential thermogravimetric analysis. Particle size was determined with transmission electron microscopy and the optical bandgap of the nanoparticles was determined by absorption spectroscopy in the ultraviolet-visible range. Dielectric permittivity and a.c. conductivity of the material were measured for frequencies from 100 kHz to 8 MHz in the temperature range of 30–120◦C. The presence of Maxwell– Wagner type interfacial polarization was found to exist in the material and hopping of electron by means of quantum mechanical tunneling is attributed as the reason for the observed a.c. conductivity

Characterization and FTIR spectral studies of human urinary stones from Southern India

Urinary stones resected from urinary bladders of patients hailing from Kollam district of Kerala State, India were analyzed by SEM, XRD and by thermal analysis techniques. The analytical results indicate that, stones have different composition, i.e., calcium phosphate, calcium phosphate hydroxide and sodium calcium carbonate. Infrared spectral studies also reveal the presence of phosphates or carbonates in these samples. Further, IR spectral investigations have revealed that amorphous carbonated species are occupied in PO4 sites in calcium phosphate type stone and OH sites in calcium phosphate hydroxide sample. Thermal studies of these samples also reveal that, carbon dioxide is released from carbonated samples upon heating which is related to amount of carbon content and bond strength. Crystals with defects and irregular morphology are grown inside the urinary bladder due to variation in crystal growth conditions

Synthese und Charakterisierung von Spirocyclopentadithiophenen

Im Rahmen dieser Arbeit wurde eine Syntheseroute zu einem neuartigen heteroanalogen Spirobifluoren auf Basis von Thiophen entwickelt und optimiert. Der neue Spirokern konnte durch Anbringung von Elektronendonor- bzw. Elektronenakzeptorgruppen funktionalisiert werden. Die erhaltenen Funktionsmaterialien wurden spektroskopisch (Ultraviolet-Visible, Fluoreszenz), thermoanalytisch (Thermogravimetrische Analyse, Differential Thermo Analysis, Differential Scanning Calorimetry), elektrochemisch (Cyclovoltammetrie) sowie teilweise mittels Feldeffekttransistor charaktrisiert.Zur Totalsynthese des neuen auf Thiophen basierenden Spirokerns 4,4´-Spirobi[cyclopenta[2,1-b:3,4-b´]dithiophen] (SCPDT) wurde eine Syntheseroute entworfen, die ausgehend von Thiophen keine weiteren aufwändigen Precursormoleküle voraussetzt. Durch die Anbringung von stabilisierenden Endgruppen war es möglich neuartige Funktionsmaterialien mit niedrigem HOMO-LUMO-Gap herzustellen. Die phenyl- bzw. biphenylsubstituierten Spirocyclopentadithiophene 4P-SCPDT und 4BP-SCPDT sind im Vergleich zu den analogen, auf Spirobifluoren basierenden Verbindungen (Spiroquaterthiophen und Spirosexiphenyl) deutlich leichter oxidier- und reduzierbar. Das erniedrigte HOMO-LUMO-Gap ist auch im Absorptions- und Fluoreszenzspektrum durch die im Vergleich zu den spirobifluorenanalogen Molekülen bathochrome bzw. bathofluore Verschiebung deutlich erkennbar. Sehr gut sind die Ergebnisse der Feldeffekttransistor- und Phototransistor-Messungen an aufgedampfem 4P-SCPDT. So lässt sich eine Lochbeweglichkeit von 2*10^-4 cm2/Vs ermitteln. Dies ist die höchste Lochbeweglichkeit, die bei Spiromolekülen im amorphen Film mit einem bottom-contact FET gemessen wurde, wobei die Grenzfläche zwischen Elektrode und Halbleiter noch nicht optimiert wurde. Selbst nach zehnmonatiger Lagerung unter Atmosphärenbedingungen bei Raumtemperatur konnten nahezu die gleichen Werte gemessen werden. Dieses Ergebnis unterstreicht die morphologische Stabilität des amorphen Filmes. Unter Bestrahlung mit UV-Licht zeigt sich ein ausgeprägter photovoltaischer Effekt. Das überrascht, da 4P-SCPDT kein typisches Donor-Akzeptor-Molekül ist. Das gemessene Ansprechvermögen (Verhältnis des elektrischen Output zum optischen Input) ist höher als das von polykristallinem Kupfer-Phthalocyanin (CuPc), konjugierten Polymeren oder anderen Spiromolekülen. Um die Lochleitungs- bzw. Elektronenleitungseigenschaften zu optimieren wurden desweiteren noch Diphenylaminophenyl-, Diphenylaminothiophenyl-, Perfluorhexylthiophenyl und Tricyanovinyl-Endgruppen an den den SCPDT-Kern angebracht und die erhaltenen Funktionsmaterialien charakterisiert.