Active Magnetic Bearing System Identification Methods and Rotor Model Updating

Active magnetic bearing is a type of bearing which uses magnetic field to levitate the rotor. These bearings require continuous control of the currents in electromagnets and data from position of the rotor and the measured current from electromagnets. Because of this different identification methods can be implemented with no additional hardware. In this thesis the focus was to implement and test identification methods for active magnetic bearing system and to update the rotor model. Magnetic center calibration is a method used to locate the magnetic center of the rotor. Rotor model identification is an identification method used to identify the rotor model. Rotor model update is a method used to update the rotor model based on identification data. These methods were implemented and tested with a real machine where rotor was levitated with active magnetic bearings and the functionality of the methods was ensured. Methods were developed with further extension in mind and also with the possibility to apply them for different machines with ease.

Press forming of paperboard – advancement of converting tools and process control

Press forming is nowadays one of the most common industrial methods in use for producing deeper trays from paperboard. Demands for material properties like recyclability and sustainability have increased also in the packaging industry, but there are still limitations related to the formability of paperboard. A majority of recent studies have focused on material development, but the potential of the package manufacturing process can also be improved by the development of tooling and process control. In this study, advanced converting tools (die cutting tools and the press forming mould) are created for production scale paperboard tray manufacturing. Also monitoring methods that enable the production of paperboard trays with enhanced quality, and can be utilized in process control are developed. The principles for tray blank preparation, including creasing pattern and die cutting tool design are introduced. The mould heating arrangement and determination of mould clearance are investigated to improve the quality of the press formed trays. The effect of the spring back of the tray walls on the tray dimensions can be managed by adjusting the heat-related process parameters and estimating it at the mould design stage. This enables production speed optimization as the process parameters can be adjusted more freely. Real-time monitoring of pressing force by using multiple force sensors embedded in the mould structure can be utilized in the evaluation of material characteristics on a modified production machinery. Comprehensive process control can be achieved with a combination of measurement of the outer dimensions of the trays and pressing force monitoring. The control method enables detection of defects and tracking changes in the material properties. The optimized converting tools provide a basis for effective operation of the control system.

Methods of overcoming dormancy in Schizolobium amazonicum Huber ex Ducke (Leguminosae - Caesalpinioideae) seeds

Seed dormancy is a frequent phenomenon in tropical species, causing slow and non-uniform germination. To overcome this, treatments such as scarification on abrasive surface and hot water are efficient. The objective of this study was to quantify seed germination with no treatment (Experiment 1) and identify an efficient method of breaking dormancy in Schizolobium amazonicum Huber ex Ducke seeds (Experiment 2). The effects of manual scarification on electric emery, water at 80ºC and 100ºC and manual scarification on wood sandpaper were studied. Seeds were sown either immediately after scarification or after immersion in water for 24h in a sand and sawdust mixture. Germination and hard seed percentages and germination speed were recorded and analyzed in a completely randomized design. Analysis of germination was carried out at six, nine, 12, 15, 18, 21 and 24 days after sowing as a 4x2 factorial design and through regression analysis. Treatment means of the remaining variables were compared by the Tukey test. Seed germination with no treatment started on the 7th day after sowing and reached 90% on the 2310th day (Experiment 1). Significant interaction between treatments to overcome dormancy and time of immersion in water was observed (Experiment 2). In general, immersion in water increased the germination in most evaluations. The regression analyses were significant for all treatments with exception of the control treatment and immersion in water at 80ºC. Germination speed was higher when seeds were scarified on an abrasive surface (emery and sandpaper) and, in these treatments, the germination ranged from 87% to 96%, with no hard seeds. S. amazonicum seeds coats are impermeable to water, which hinders quick and uniform germination. Scarification on electric emery followed by immediate sowing, scarification on sandpaper followed by immediate sowing and sowing after 24h were the most efficient treatments for overcoming dormancy in S. amazonicum seeds.

Accelerating food safety and quality control: The use of antibody engineering techniques in the detec-tion of low-molecular weight food contaminants

The increased awareness and evolved consumer habits have set more demanding standards for the quality and safety control of food products. The production of foodstuffs which fulfill these standards can be hampered by different low-molecular weight contaminants. Such compounds can consist of, for example residues of antibiotics in animal use or mycotoxins. The extremely small size of the compounds has hindered the development of analytical methods suitable for routine use, and the methods currently in use require expensive instrumentation and qualified personnel to operate them. There is a need for new, cost-efficient and simple assay concepts which can be used for field testing and are capable of processing large sample quantities rapidly. Immunoassays have been considered as the golden standard for such rapid on-site screening methods. The introduction of directed antibody engineering and in vitro display technologies has facilitated the development of novel antibody based methods for the detection of low-molecular weight food contaminants. The primary aim of this study was to generate and engineer antibodies against low-molecular weight compounds found in various foodstuffs. The three antigen groups selected as targets of antibody development cause food safety and quality defects in wide range of products: 1) fluoroquinolones: a family of synthetic broad-spectrum antibacterial drugs used to treat wide range of human and animal infections, 2) deoxynivalenol: type B trichothecene mycotoxin, a widely recognized problem for crops and animal feeds globally, and 3) skatole, or 3-methyindole is one of the two compounds responsible for boar taint, found in the meat of monogastric animals. This study describes the generation and engineering of antibodies with versatile binding properties against low-molecular weight food contaminants, and the consecutive development of immunoassays for the detection of the respective compounds.

Utilization of Statistical Methods for Management in the Forest Industry

The strongest wish of the customer concerning chemical pulp features is consistent, uniform quality. Variation may be controlled and reduced by using statistical methods. However, studies addressing the application and benefits of statistical methods in forest product sector are scarce. Thus, the customer wish is the root cause of the motivation behind this dissertation. The research problem addressed by this dissertation is that companies in the chemical forest product sector require new knowledge for improving their utilization of statistical methods. To gain this new knowledge, the research problem is studied from five complementary viewpoints – challenges and success factors, organizational learning, problem solving, economic benefit, and statistical methods as management tools. The five research questions generated on the basis of these viewpoints are answered in four research papers, which are case studies based on empirical data collection. This research as a whole complements the literature dealing with the use of statistical methods in the forest products industry. Practical examples of the application of statistical process control, case-based reasoning, the cross-industry standard process for data mining, and performance measurement methods in the context of chemical forest products manufacturing are brought to the public knowledge of the scientific community. The benefit of the application of these methods is estimated or demonstrated. The purpose of this dissertation is to find pragmatic ideas for companies in the chemical forest product sector in order for them to improve their utilization of statistical methods. The main practical implications of this doctoral dissertation can be summarized in four points: 1. It is beneficial to reduce variation in chemical forest product manufacturing processes 2. Statistical tools can be used to reduce this variation 3. Problem-solving in chemical forest product manufacturing processes can be intensified through the use of statistical methods 4. There are certain success factors and challenges that need to be addressed when implementing statistical methods

Control of Bubbling Fluidized Bed Conditions

The objectives of this master’s thesis were to understand the importance of bubbling fluidized bed (BFB) conditions and to find out how digital image processing and acoustic emission technology can help in monitoring the bed quality. An acoustic emission (AE) measurement system and a bottom ash camera system were evaluated in acquiring information about the bed conditions. The theory part of the study describes the fundamentals of BFB boiler and evaluates the characteristics of bubbling bed. Causes and effects of bed material coarsening are explained. The ways and methods to monitor the behaviour of BFB are determined. The study introduces the operating principles of AE technology and digital image processing. The empirical part of the study describes an experimental arrangement and results of a case study at an industrial BFB boiler. Sand consumption of the boiler was reduced by optimization of bottom ash handling and sand feeding. Furthermore, data from the AE measurement system and the bottom ash camera system was collected. The feasibility of these two systems was evaluated. The particle size of bottom ash and the changes in particle size distribution were monitored during the test period. Neither of the systems evaluated was ready to serve in bed quality control accurately or fast enough. Particle size distributions according to the bottom ash camera did not correspond to the results of manual sieving. Comprehensive interpretation of the collected AE data requires much experience. Both technologies do have potential and with more research and development they may enable acquiring reliable and real-time information about the bed conditions. This information could help to maintain disturbance-free combustion process and to optimize bottom ash handling system.

Development of a New Welding Product Quality Control and Management System Model for China

The Chinese welding industry is growing every year due to rapid development of the Chinese economy. Increasingly, companies around the world are looking to use Chinese enterprises as their cooperation partners. However, the Chinese welding industry also has its weaknesses, such as relatively low quality and weak management. A modern, advanced welding management system appropriate for local socio-economic conditions is required to enable Chinese enterprises to enhance further their business development. The thesis researches the design and implementation of a new welding quality management system for China. This new system is called ‗welding production quality control management model in China‘ (WQMC). Constructed on the basis of analysis of a survey and in-company interviews, the welding management system comprises the following different elements and perspectives: a ‗Localized congenital existing problem resolution strategies‘ (LCEPRS) database, a ‗human factor designed training system‘ (HFDT) training strategy, the theory of modular design, ISO 3834 requirements, total welding management (TWM), and lean manufacturing (LEAN) theory. The methods used in the research are literature review, questionnaires, interviews, and the author‘s model design experiences and observations, i.e. the approach is primarily qualitative and phenomenological. The thesis describes the design and implementation of a HFDT strategy in Chinese welding companies. Such training is an effective way to increase employees‘ awareness of quality and issues associated with quality assurance. The study identified widely existing problems in the Chinese welding industry and constructed a LCEPRS database that can be used in efforts to mitigate and avoid common problems. The work uses the theory of modular design, TWM and LEAN as tools for the implementation of the WQMC system.

Conformational analysis of antibody binding site using EDMA methods /

Euclidean distance matrix analysis (EDMA) methods are used to distinguish whether or not significant difference exists between conformational samples of antibody complementarity determining region (CDR) loops, isolated LI loop and LI in three-loop assembly (LI, L3 and H3) obtained from Monte Carlo simulation. After the significant difference is detected, the specific inter-Ca distance which contributes to the difference is identified using EDMA.The estimated and improved mean forms of the conformational samples of isolated LI loop and LI loop in three-loop assembly, CDR loops of antibody binding site, are described using EDMA and distance geometry (DGEOM). To the best of our knowledge, it is the first time the EDMA methods are used to analyze conformational samples of molecules obtained from Monte Carlo simulations. Therefore, validations of the EDMA methods using both positive control and negative control tests for the conformational samples of isolated LI loop and LI in three-loop assembly must be done. The EDMA-I bootstrap null hypothesis tests showed false positive results for the comparison of six samples of the isolated LI loop and true positive results for comparison of conformational samples of isolated LI loop and LI in three-loop assembly. The bootstrap confidence interval tests revealed true negative results for comparisons of six samples of the isolated LI loop, and false negative results for the conformational comparisons between isolated LI loop and LI in three-loop assembly. Different conformational sample sizes are further explored by combining the samples of isolated LI loop to increase the sample size, or by clustering the sample using self-organizing map (SOM) to narrow the conformational distribution of the samples being comparedmolecular conformations. However, there is no improvement made for both bootstrap null hypothesis and confidence interval tests. These results show that more work is required before EDMA methods can be used reliably as a method for comparison of samples obtained by Monte Carlo simulations.

The impact of tobacco control policies on university students' smoking in Ontario

Objective. Despite steady declines in the prevalence of tobacco use among Canadians, young adult tobacco use has remained stubbornly high over the past two decades (CTUMS, 2005a). Currently in Ontario, young adults have the highest proportion of smokers of all age cohorts at 26%. A growing body of evidence shows that smoking restrictions and other tobacco control policies can reduce tobacco use and consumption among adults and deter initiation among youth; whether young adult university students' smoking participation is influenced by community smoking restrictions, campus tobacco control policies or both remains an empirical question. The purpose of this study is to examine the relationship among current smoking status of students on university campuses across Ontario and various tobacco control policies, 3including clean air bylaws of students' home towns, clean air by-laws of the community where the university is situated, and campus policies. Methods. Two data sets were used. The 200512006 Tobacco Use in a Representative Sample of Post-Secondary Students data set provides information about the tobacco use of 10,600 students from 23 universities and colleges across Ontario. Data screening for this study reduced the sample to 5,114 17-to-24 year old undergraduate students from nine universities. The second data set is researcher-generated and includes information about strength and duration of, and students' exposure to home town, local and campus tobacco control policies. Municipal by-laws (of students' home towns and university towns) were categorized as weak, moderate or strong based on criteria set out in the Ontario Municipal By-law Report; campus policies were categorized in a roughly parallel fashion. Durations of municipal and campus policies were calculated; and length of students' exposure to the policies was estimated (all in months). Multinomial logistic regression analyses were used to examine the relationship between students' current smoking status (daily, less-than-daily, never-smokers) and the following policy measures: strength of, duration of, and students' exposure to campus policy; strength of, duration of, and students' exposure to the by-law in the university town; and, strength of, duration of, and students' exposure to the by-law in the home town they grew up in. Sociodemographic variables were controlled for. Results. Among the Ontario university students surveyed, 7.0% currently use tobacco daily and 15.4% use tobacco less-than-daily. The proportions of students experiencing strong tobacco control policies in their home town, the community in which their university is located and at their current university were 33.9%,64.1 %, and 31.3% respectively. However, 13.7% of students attended a university that had a weak campus policy. Multinomial logistic regressions suggested current smoking status was associated with university town by-law strength, home town by-law strength and the strength of the campus tobacco control policy. In the fmal model, after controlling for sociodemographic factors, a strong by-law in the university town and a strong by-law in students' home town were associated with reduced odds of being both a less-than-daily (OR = 0.64, 95%CI: 0.48-0.86; OR = 0.80, 95%CI: 0.66-0.95) and daily smoker (OR = 0.59, 95%CI: 0.39-0.89; OR = 0.76, 95%CI: 0.58-0.99), while a weak campus tobacco control policy was associated with higher odds of being a daily smoker (OR = 2.08, 95%CI: 1.31-3.30) (but unrelated to less-than-daily smoking). Longer exposure to the municipal by-law (OR = 0.93; 95%CI: 0.90-0.96) was also related to smoking status. Conclusions. Students' smoking prevalence was associated with the strength of the restrictions in university, and with campus-specific tobacco control policies. Lessthan- daily smoking was not as strongly associated with policy measures as daily smoking was. University campuses may wish to adopt more progressive campus policies and support clean air restrictions in the broader community. More research is needed to determine the direction of influence between tobacco control policies and students' smoking.

The Association between Tobacco Control Policies and Marijuana Use among Ontario Undergraduate Students

Background: Research indicates a steady increase in marijuana use and that it is concurrent with tobacco. There is speculation this concurrency reaches beyond use, to where policies aimed at reducing one may result in the reduction of the other. Purpose: To investigate the association between tobacco control policies and marijuana use among young adult undergraduates. Methods: A stratified sample of Ontario universities resulted in a sample of 4,966 participants. Results: Campuses with a moderately strong policy was found to be significantly associated with decreased marijuana use compared to campuses with a weak tobacco control policy. (OR=0.52, 95% CI: 0.36-0.76). Conclusions: The findings show tobacco control strategies are related to decreased odds of marijuana use among Ontario undergraduates. These findings are important to both policy makers and researchers interested in health strategies pertaining to marijuana and tobacco use and/or how health policies aimed at reducing one risk behaviour can affect another.

Transmission dynamics and tuberculosis control among HIV/AIDS patients

Introduction: Les efforts globaux pour contrôler la tuberculose sont présentement restreints par la prévalence croissante du VIH/SIDA. Quoique les éclosions de la tuberculose multi résistante (TB-MDR) soient fréquemment rapportées parmi les populations atteintes du SIDA, le lien entre VIH/SIDA et le développement de résistance n’est pas clair. Objectifs: Cette recherche visait à : (1) développer une base de connaissances concernant les facteurs associés à des éclosions de la TB-MDR parmi les patients atteints du VIH/SIDA; (2) utiliser ce cadre de connaissances pour accroître des mesures préliminaires pour mieux contrôler la tuberculose pulmonaire chez les patients atteints du VIH/SIDA; et (3) afin d’améliorer l’application des ces mesures, affiner les techniques bactériologiques existantes pour Mycobacterium tuberculosis. Méthodologie: Quatre études ont été réalisées : (1) Une étude longitudinale pour identifier les facteurs associés avec une éclosion de la TB-MDR parmi les patients atteints du SIDA qui ont reçu le traitement directement supervisé de courte durée (DOTS) pour la tuberculose pulmonaire au Lima et au Pérou entre 1999 et 2005; (2) Une étude transversale pour décrire différentes étapes de l’histoire naturelle de la tuberculose, la prévalence et les facteurs associés avec la mycobactérie qu’on retrouve dans les selles des patients atteints du SIDA; (3) Un projet pilote pour développer des stratégies de dépistage pour la tuberculose pulmonaire parmi les patients hospitalisés atteints du SIDA, en utilisant l’essaie Microscopic Observation Drug Susceptibility (MODS); et (4) Une étude laboratoire pour identifier les meilleures concentrations critiques pour détecter les souches MDR de M. tuberculosis en utilisant l’essaie MODS. Résultats : Étude 1 démontre qu’une épidémie de TB-MDR parmi les patients atteints du SIDA qui ont reçu DOTS pour la tuberculose pulmonaire ait été causée par la superinfection du clone de M. tuberculosis plutôt que le développement de la résistance secondaire. Bien que ce clone ait été plus commun parmi la cohorte de patients atteints du SIDA, il n’avait aucune différence de risque pour superinfection entre les patients avec ou sans SIDA. Ces résultats suggèrent qu’un autre facteur, possiblement associé à la diarrhée, peu contribuer à la prévalence élevée de ce clone chez les patients atteints du SIDA. Étude 2 suggère que chez la plupart des patients atteints du SIDA il a été retrouvé une mycobactérie dans leurs selles alors qu’ils étaient en phase terminale au niveau de la tuberculose pulmonaire. Or, les patients atteints du SIDA ayant été hospitalisés pendant les deux dernières années pour une autre condition médicale sont moins à risque de se retrouver avec une mycobactérie dans leurs selles. Étude 3 confirme que la tuberculose pulmonaire a été commune à tous les patients hospitalisés atteints du SIDA, mais diagnostiquée incorrectement en utilisant les critères cliniques présentement recommandés pour la tuberculose. Or, l’essaie MODS a détecté pour la plupart de ces cas. De plus, MODS a été également efficace quand la méthode a été dirigée aux patients soupçonnés d’avoir la tuberculose, à cause de leurs symptômes. Étude 4 démontre les difficultés de détecter les souches de M. tuberculosis avec une faible résistance contre ethambutol et streptomycine en utilisant l’essai MODS avec les concentrations de drogue présentement recommandées pour un milieu de culture. Cependant, l’utilité diagnostique de MODS peut être améliorée ; modifier les concentrations critiques et utiliser deux plaques et non une, pour des tests réguliers. Conclusion: Nos études soulèvent la nécessité d’améliorer le diagnostic et le traitement de la tuberculose parmi les patients atteints du SIDA, en particulier ceux qui vivent dans des régions avec moins de ressources. Par ailleurs, nos résultats font ressortir les effets indirects que les soins de santé ont sur les patients infectés par le VIH et qu’ils peuvent avoir sur le développement de la tuberculose.

The expression and production of piano timbre : gestural control and technique, perception and verbalisation in the context of piano performance and practice

La version intégrale de cette thèse est disponible uniquement pour consultation individuelle à la Bibliothèque de musique de l’Université de Montréal (http://www.bib.umontreal.ca/MU).

Sunlight exposure and prostate cancer risk : a case-control study in Montreal, Canada

Objectifs: Évaluer l’association entre l’exposition récréative, professionnelle et globale au soleil et le risque de cancer de la prostate (CaP). Méthodes: Dans le contexte d’une étude cas-témoins sur le CaP menée à Montréal, Canada, des entrevues ont été complétées auprès de 1371 cas incidents de CaP diagnostiqués en 2005-2009, et 1479 témoins de la population générale. Des questionnaires détaillés ont permis d’obtenir de l’information sur la fréquence et la durée de participation à toute activité extérieure lors des loisirs durant l’âge adulte, ainsi qu’une description de chaque emploi tenu au cours de la vie. Une matrice emploi-exposition canadienne a été appliquée à chaque emploi afin d’assigner un niveau d’exposition professionnelle au soleil. Des indices cumulatifs de l’exposition au soleil basés sur le nombre d’événements récréatifs, la durée d’exposition professionnelle, ainsi qu’un indice d’exposition global ont été développés. La régression logistique a été utilisée pour estimer l’association entre chaque indice d’exposition et le CaP, en ajustant pour des variables de confusion potentielles. Résultats: Globalement, il n’y avait pas d’association entre chacun des indices d’exposition et le risque de CaP. Certaines tendances en accord avec un risque légèrement plus faible chez les hommes exposés au soleil ont été observées mais les résultats n’étaient pas statistiquement significatifs et il n’y avait pas de relation dose-réponse. Conclusion: Notre étude apporte peu de soutien à l’hypothèse d’une association entre l’exposition au soleil et le risque de développer un cancer de la prostate.

Genomic architecture of sickle cell disease clinical variation in children from West Africa : a case-control study design

Contexte : L’anémie falciforme ou drépanocytose est un problème de santé important, particulièrement pour les patients d’origine africaine. La variation phénotypique de l’anémie falciforme est problématique pour le suivi et le traitement des patients. L’architecture génomique responsable de cette variabilité est peu connue. Principe : Mieux saisir la contribution génétique de la variation clinique de cette maladie facilitera l’identification des patients à risque de développer des phénotypes sévères, ainsi que l’adaptation des soins. Objectifs : L’objectif général de cette thèse est de combler les lacunes relatives aux connaissances sur l’épidémiologie génomique de l’anémie falciforme à l’aide d’une cohorte issue au Bénin. Les objectifs spécifiques sont les suivants : 1) caractériser les profils d’expressions génomiques associés à la sévérité de l’anémie falciforme ; 2) identifier des biomarqueurs de la sévérité de l’anémie falciforme ; 3) identifier la régulation génétique des variations transcriptionelles ; 4) identifier des interactions statistiques entre le génotype et le niveau de sévérité associé à l’expression ; 5) identifier des cibles de médicaments pour améliorer l’état des patients atteints d’anémie falciforme. Méthode : Une étude cas-témoins de 250 patients et 61 frères et soeurs non-atteints a été menée au Centre de Prise en charge Médical Intégré du Nourrisson et de la Femme Enceinte atteints de Drépanocytose, au Bénin entre février et décembre 2010. Résultats : Notre analyse a montré que des profils d’expressions sont associés avec la sévérité de l’anémie falciforme. Ces profils sont enrichis de génes des voies biologiques qui contribuent à la progression de la maladie : l’activation plaquettaire, les lymphocytes B, le stress, l’inflammation et la prolifération cellulaire. Des biomarqueurs transcriptionnels ont permis de distinguer les patients ayant des niveaux de sévérité clinique différents. La régulation génétique de la variation de l’expression des gènes a été démontrée et des interactions ont été identifiées. Sur la base de ces résultats génétiques, des cibles de médicaments sont proposées. Conclusion: Ce travail de thèse permet de mieux comprendre l’impact de la génomique sur la sévérité de l’anémie falciforme et ouvre des perspectives de développement de traitements ciblés pour améliorer les soins offerts aux patients.