Cadherin-directed actin assembly: E-cadherin physically associates with the Arp2/3 complex to direct actin assembly in nascent adhesive contacts

Cadherin cell adhesion molecules are major determinants of tissue patterning which function in cooperation with the actin cytoskeleton [1-4]. In the context of stable adhesion [1], cadherin/catenin complexes are often envisaged to passively scaffold onto cortical actin filaments. However, cadherins also form dynamic adhesive contacts during wound healing and morphogenesis [2]. Here actin polymerization has been proposed to drive cell surfaces together [5], although F-actin reorganization also occurs as cell contacts mature [6]. The interaction between cadherins and actin is therefore likely to depend on the functional state of adhesion. We sought to analyze the relationship between cadherin homophilic binding and cytoskeletal activity during early cadherin adhesive contacts. Dissecting the specific effect of cadherin ligation alone on actin regulation is difficult in native cell-cell contacts, due to the range of juxtacrine signals that can arise when two cell surfaces adhere [7]. We therefore activated homophilic ligation using a specific functional recombinant protein. We report the first evidence that E-cadherin associates with the Arp2/3 complex actin nucleator and demonstrate that cadherin binding can exert an active, instructive influence on cells to mark sites for actin assembly at the cell surface.

E-cadherin homophilic ligation directly signals through Rac and phosphatidylinositol 3-kinase to regulate adhesive contacts

Classical cadherins mediate cell recognition and cohesion in many tissues of the body. It is increasingly apparent that dynamic cadherin contacts play key roles during morphogenesis and that a range of cell signals are activated as cells form contacts with one another. It has been difficult, however, to determine whether these signals represent direct downstream consequences of cadherin ligation or are juxtacrine signals that are activated when cadherin adhesion brings cell surfaces together but are not direct downstream targets of cadherin signaling. In this study, we used a functional cadherin ligand (hE/Fc) to directly test whether E-cadherin ligation regulates phosphatidylinositol 3-kinase (PI 3-kinase) and Rac signaling. We report that homophilic cadherin ligation recruits Rae to nascent adhesive contacts and specifically stimulates Rae signaling. Adhesion to hE/Fc also recruits PI 3-kinase to the cadherin complex, leading to the production of phosphatidylinositol 3,4,5-trisphosphate in nascent cadherin contacts. Rae activation involved an early phase, which was PI 3-kinase-independent, and a later amplification phase, which was inhibited by wortmannin. PI 3-kinase and Rae activity were necessary for productive adhesive contacts to form following initial homophilic ligation. We conclude that E-cadherin is a cellular receptor that is activated upon homophilic ligation to signal through PI 3-kinase and Rae. We propose that a key function of these cadherin-activated signals is to control adhesive contacts, probably via regulation of the actin cytoskeleton, which ultimately serves to mediate adhesive cell-cell recognition.

Reverse transcriptase activity and untranslated region sharing of a new RTE-like, non-long terminal repeat retrotransposon from the human blood fluke, Schistosoma japonicum

A new RTE-like, non-long terminal repeat retrotransposon, termed SjR2, from the human blood fluke, Schistosoma japonicum, is described. SjR2 is similar to3.9 kb in length and is constituted of a single open reading frame encoding a polyprotein with apurinic/apyrimidinic endonuclease and reverse transcriptase domains. The open reading frame is bounded by 5'- and 3'-terininal untranslated regions and, at its 3-terminus, SjR2 bears a short (TGAC)(3) repeat. Phylogenetic analyses based on conserved domains of reverse transcriptase or endonuclease revealed that SjR2 belonged to the RTE clade of non-long terminal repeat retrotransposons. Further, SjR2 was homologous, but probably not orthologous, to SR2 front the African blood fluke, Schistosoma mansoni; this RTE-like family of non-long terminal repeat retrotransposons appears to have arisen before the divergence of the extant schistosome species. Hybridisation analyses indicated that similar to 10,000 copies of SjR2 were dispersed throughout the S. japonicum chromosomes, accounting for up to 14% of the nuclear genome. Messenger RNAs encoding the reverse transcriptase and endonuclease domains of SjR2 were detected in several developmental stages of the schistosome, indicating that the retrotransposon was actively replicating within the genome of the parasite. Exploration of the coding and non-coding regions of SjR2 revealed two notable characteristics. First, the recombinant reverse transcriptase domain of SjR2 expressed in insect cells primed reverse transcription of SjR2 mRNA in vitro. By contrast, recombinant SjR2-endonuclease did not appear to cleave schistosome or plasmid DNA. Second, the 5'-untranslated region of SjR2 was >80% identical to the 3-untranslated region of a schistosome heat shock protein-70 gene (hsp-70) in the antisense orientation, indicating that SjR2-like elements were probably inserted into the non-coding regions of ancestral S. japonicum HSP-70, probably after the species diverged from S. mansoni. (C) 2002 Australian Society for Parasitology Inc. Published by Elsevier Science Ltd. All rights reserved.

API documentation with executable examples

The rise of component-based software development has created an urgent need for effective application program interface (API) documentation. Experience has shown that it is hard to create precise and readable documentation. Prose documentation can provide a good overview but lacks precision. Formal methods offer precision but the resulting documentation is expensive to develop. Worse, few developers have the skill or inclination to read formal documentation. We present a pragmatic solution to the problem of API documentation. We augment the prose documentation with executable test cases, including expected outputs, and use the prose plus the test cases as the documentation. With appropriate tool support, the test cases are easy to develop and read. Such test cases constitute a completely formal, albeit partial, specification of input/output behavior. Equally important, consistency between code and documentation is demonstrated by running the test cases. This approach provides an attractive bridge between formal and informal documentation. We also present a tool that supports compact and readable test cases; and generation of test drivers and documentation, and illustrate the approach with detailed case studies. (C) 2002 Elsevier Science Inc. All rights reserved.

Use of web-based formative assessment to support student learning in metabolism/nutrition unit

In 2002, an integrated basic science course was introduced into the Bachelor of Dental Sciences programme at the University of Queensland, Australia. Learning activities for the Metabolism and Nutrition unit within this integrated course included lectures, problem-based learning tutorials, computer-based self-directed learning exercises and practicals. To support student learning and assist students to develop the skills necessary to become lifelong learners, an extensive bank of formative assessment questions was set up using the commercially available package, WebCT®. Questions included short-answer, multiple-choice and extended matching questions. As significant staff time was involved in setting up the question database, the extent to which students used the formative assessment and their perceptions of its usefulness to their learning were evaluated to determine whether formative assessment should be extended to other units within the course. More than 90% of the class completed formative assessment tasks associated with learning activities scheduled in the first two weeks of the block, but this declined to less than 50% by the fourth and final week of the block. Patterns of usage of the formative assessment were also compared in students who scored in the top 10% for all assessment for the semester with those who scored in the lowest 10%. High-performing students accessed the Web-based formative assessment about twice as often as those who scored in the lowest band. However, marks for the formative assessment tests did not differ significantly between the two groups. In a questionnaire that was administered at the completion of the block, students rated the formative assessment highly, with 80% regarding it as being helpful for their learning. In conclusion, although substantial staff time was required to set up the question database, this appeared to be justified by the positive responses of the students.

Electropalatographic assessment of tongue-to-palate contacts exhibited in dysarthria following traumatic brain injury: Spatial characteristics

Consonant imprecision has been reported to be a common feature of the dysarthric speech disturbances exhibited by individuals who have sustained a traumatic brain injury (TBI). Inaccurate tongue placements against the hard palate during consonant articulation may be one factor underlying the imprecision. To investigate this hypothesis, electropalatography (EPG) was used to assess the spatial characteristics of the tongue-to-palate contacts exhibited by three males (aged 23-29 years) with dysarthria following severe TBI. Five nonneurologically impaired adults served as control subjects. Twelve single-syllable words of CV or CVC construction (where initial C = /t, d, S, z, k, g/, V=/i, a/) were read aloud three times by each subject while wearing an EPG palate. Spatial characteristics were analyzed in terms of the location, pattern, and amount of tongue-to-palate contact at the frame of maximum contact during production of each consonant. The results revealed that for the majority of consonants, the patterns and locations of contacts exhibited by the TBI subjects were consistent with the contacts generated by the group of control subjects. One notable exception was one subject's production of the alveolar fricatives in which complete closure across the palate was demonstrated, rather than the characteristic groove configuration. Major discrepancies were also noted in relation to the amount of tongue-to-palate contact exhibited, with two TBI subjects consistently demonstrating increased contacts compared to the control subjects. The implications of these findings for the development of treatment programs for dysarthric speech disorders subsequent to TBI are highlighted.

Synthesis and characterization of delta-atracotoxin-ar1a, the lethal neurotoxin from venom of the Sydney funnel-web spider (Atrax robustus)

delta-Atracotoxin-Ar1a (delta-ACTX-Ar1a) is the major polypeptide neurotoxin isolated from the venom of the male Sydney funnel-web spider, Atrax robustus. This neurotoxin targets both insect and mammalian voltage-gated sodium channels, where it competes with scorpion alpha-toxins for neurotoxin receptor site-3 to slow sodium-channel inactivation. Progress in characterizing the structure and mechanism of action of this toxin has been hampered by the limited supply of pure toxin from natural sources. In this paper, we describe the first successful chemical synthesis and oxidative refolding of the four-disulfide bond containing delta-ACTX-Ar1a. This synthesis involved solid-phase Boc chemistry using double coupling, followed by oxidative folding of purified peptide using a buffer of 2 M GdnHCl and glutathione/glutathiol in a 1:1 mixture of 2-propanol (pH 8.5). Successful oxidation and refolding was confirmed using both chemical and pharmacological characterization. Ion spray mass spectrometry was employed to confirm the molecular weight. H-1 NMR analysis showed identical chemical shifts for native and synthetic toxins, indicating that the synthetic toxin adopts the native fold. Pharmacological studies employing whole-cell patch clamp recordings from rat dorsal root ganglion neurons confirmed that synthetic delta-ACTX-Ar1a produced a slowing of the sodium current inactivation and hyperpolarizing shifts in the voltage-dependence of activation and inactivation similar to native toxin. Under current clamp conditions, we show for the first time that delta-ACTX-Ar1a produces spontaneous repetitive plateau potentials underlying the clinical symptoms seen during envenomation. This successful oxidative refolding of synthetic delta-ACTX-Ar1a paves the way for future structure-activity studies to determine the toxin pharmacophore.

Baixa de empresa web

Visando oferecer um servi??o inteligente, eficiente, ??gil e com maior qualidade ao contribuinte, a Diretoria de Arrecada????o do INSS disponibilizou, em conson??ncia com o Plano de A????o do Governo Eletr??nico e o Programa Nacional de Desburocratiza????o, o programa Baixa de Empresa Web, que viabiliza a emiss??o da certid??o de baixa para fins de registro ou arquivamento no ??rg??o pr??prio. Esse programa busca as informa????es contributivas da empresa e verifica a exist??ncia de restri????es ou impedimentos nos diversos bancos de dados do INSS, disponibilizando, em tempo real, o resultado do processamento. Os contribuintes podem acess??-lo pela Internet, no site da Previd??ncia Social (www.previdenciasocial.gov.br), e os servidores, pela Intranet

Researchers' information needs in the bibliographic database : a literature review

This article is published online with Open Access and distributed under the terms of the Creative Commons Attribution Non-Commercial License.

Indicadores de Ciência, Tecnologia & Inovação : análise da produção científica e tecnológica da área de conhecimento em Engenharia Civil na Base de Dados da Web of Science

Esta dissertação trata da análise da produção científica e tecnológica internacional e brasileira na área de conhecimento Engenharia Civil, por meio de indicadores bibliométricos. A área Engenharia Civil foi escolhida em razão da sua relevância para o desenvolvimento econômico do país. No entanto, em termos absolutos e relativos, está entre os setores tecnologicamente mais atrasados da economia. A bibliometria é uma disciplina com alcance multidisciplinar que estuda o uso e os aspectos quantitativos da produção científica registrada. Os indicadores de produção científica são objeto de análise de várias áreas do conhecimento, tanto para o planejamento e a execução de políticas públicas de vários setores quanto para maior conhecimento da comunidade científica sobre o sistema em que está inserida. A metodologia utilizada para a elaboração deste estudo descritivo de caráter exploratório foi a análise documental e bibliométrica, baseada em dados das publicações científicas, no período de 1970 a 2012, e tecnológicas, no período de 2001 a 2012, da área Engenharia Civil, indexadas nas bases de dados Science Citattion Index Expanded (SCI); Social Science Citation Index (SSCI); Conference Proceedings Citation Index (CPCI) e da Derwent Innovations Index (DII), que compõem a base de dados multidisciplinar da Web of Sicence (WoS). As informações foram qualificadas e quantificadas com o auxílio do software bibliométrico VantagePoint®. Os resultados obtidos confirmaram o baixo número de publicações científicas e tecnológicas na área de conhecimento Engenharia Civil de autores filiados a instituições de ensino e pesquisa brasileiras quando comparados aos dos países industrializados. Existe um conjunto de fortes condicionantes que ultrapassam o poder de decisão e de influência da academia, dificultando e limitando a disseminação das pesquisas e patentes brasileiras relacionadas a fatores de caráter sistêmico e cultural. A possibilidade de análise de indicadores de produção científica e tecnológica na Engenharia Civil contribui para criar políticas que, se utilizadas por agências de fomento, podem subsidiar investimentos mais fundamentados por parte dos governos e da iniciativa privada, a exemplo do que é feito por outros setores industriais.

The decentralized social networking systems towards mobilizing actions of citizenship and solidarity against cancer

The goal of the present study is mapping the nature of possible contributions of participatory online platforms in citizen actions that may contribute in the fight against cancer and its associated consequences. These platforms are usually associated with entertainment: in that sense, we intent to test their validity in other domains such as health, as well as contribute to an expanded perception of their potential by their users. The research is based on the analysis of online solidarity networks, namely the ones residing on Facebook, Orkut and the blogosphere, that citizens have been gradually resorting to. The research is also based on the development of newer and more efficient solutions that provide the individual (directly or indirectly affected by issues of oncology) with the means to overcome feelings of impotence and fatality. In this article, we aim at summarizing the processes of usage of these decentralized, freer participatory platforms by citizens and institutions, while attempting to unravel existing hype and stigma; we also provide a first survey of the importance and the role of institutions in this kind of endeavor; lastly, we present a prototype, developed in the context of the present study, that is specifically dedicated to addressing oncology through social media. This prototype is already available online at www.talkingaboutcancer.org, however, still under development and testing. The main objective of this platform is to allow every citizen to freely build their network of contacts and information, according to their own individual and/ or collective needs and desires.

The perceived potential of business social networking sites

Business social networking is a facilitator of several business activities, such as market studies, communication with clients, and identification of business partners. This paper traduces the results of a study undertaken with the purpose of getting to know how the potential of networking is perceived in the promotion of business by participants of the LinkedIn network, and presents two main contributions: (1) to disseminate within the business community which is the relevance given to social networking; and (2) which are the social networks best suitable to the promotion of business, to support the definition of strategies and approaches accordingly. The results confirm that LinkedIn is the most suitable network to answer the needs of those that look for professional contacts and for the promotion of business, while innovation is the most recognized factor in the promotion of business through social networking. This study contributes to a better understanding of the potential of different business social networking sites, to support organizations and professionals to align their strategies with the perceived potential of each network.