High-pressure processing and antimicrobial biodegradable packaging to control Listeria monocytogenes during storage of cooked ham

The efficiency of combining high-pressure processing (HPP) and active packaging technologies to control Listeria monocytogenes growth during the shelf life of artificially inoculated cooked ham was assessed. Three lots of cooked ham were prepared: control, packaging with alginate films, and packaging with antimicrobial alginate films containing enterocins. After packaging, half of the samples were pressurized. Sliced cooked ham stored at 6 °C experienced a quick growth of L. monocytogenes. Both antimicrobial packaging and pressurization delayed the growth of the pathogen. However, at 6 °C the combination of antimicrobial packaging and HPP was necessary to achieve a reduction of inoculated levels without recovery during 60 days of storage. Further storage at 6 °C of pressurized antimicrobial packed cooked ham resulted in L. monocytogenes levels below the detection limit (day 90). On the other hand, storage at 1 °C controlled the growth of the pathogen until day 39 in non-pressurized ham, while antimicrobial packaging and storage at 1 °C exerted a bacteriostatic effect for 60 days. All HPP lots stored at 1 °C led to counts <100 CFU/g at day 60. Similar results were observed when combining both technologies. After a cold chain break no growth of L. monocytogenes was observed in pressurized ham packed with antimicrobial films, showing the efficiency of combining both technologies.

Combined effect of natural antimicrobials and high pressure processing to prevent Listeria monocytogenes growth after a cold chain break during storage of cooked ham

The effect of high pressure processing (400 MPa for 10 min) and natural antimicrobials 2 (enterocins and lactate-diacetate) on the behaviour of L. monocytogenes in sliced cooked ham 3 during refrigerated storage (1ºC and 6ºC) was assessed. The efficiency of the treatments after a 4 cold chain break was evaluated. Lactate-diacetate exerted a bacteriostatic effect against L. 5 monocytogenes during the whole storage period (3 months) at 1ºC and 6ºC, even after 6 temperature abuse. The combination of low storage temperature (1ºC), high pressure 7 processing (HPP) and addition of lactate-diacetate reduced the levels of L. monocytogenes 8 during storage by 2.7 log CFU/g. The most effective treatment was the combination of HPP, 9 enterocins and refrigeration at 1ºC, which reduced the population of the pathogen to final counts 10 of 4 MPN/g after 3 months of storage, even after the cold chain break.

High pressure induced changes on sarcoplasmic protein fraction and quality indicators

The combined effect of pressure and mild temperature treatments on bovine sarcoplasmic proteins and quality parameters was assessed. M. longissimus dorsi samples were pressurised in a range of 200–600 MPa and 10–30 °C. High Pressure Processing (HPP) induced a reduction of protein solubility (p < 0.001) compared to non-treated controls (NT), more pronounced above 200 MPa. HPP at pressures higher than 200 MPa induced a strong modification (p < 0.001) of meat colour and a reduction of water holding capacity (WHC). SDS–PAGE analysis demonstrated that HPP significantly modified the composition of the sarcoplasmic protein fraction. The pressurisation temperature mainly affected protein solubility and colour; a smaller effect was observed on protein profiles. Significant correlations (p < 0.001) between sarcoplasmic protein solubility and both expressible moisture (r = −0.78) and colour parameters (r = −0.81 to −0.91) suggest that pressure induced denaturation of sarcoplasmic proteins could influence to some extent WHC and colour modifications of beef. Changes in protein band intensities were also significantly correlated with protein solubility, meat lightness and expressible moisture. These results describe the changes induced by HPP on sarcoplasmic proteins and confirm a relationship between modification of the sarcoplasmic protein fraction and alteration of meat quality characteristics

Surface-enhanced laser desorption/ionisation time-of-flight mass spectrometry: A tool to predict pork quality

Expression of water soluble proteins of fresh pork Longissimus thoracis from 4 pure breed pigs (Duroc, Large White, Landrace, and Piétrain) was studied to identify candidate protein markers for meat quality. Surface-enhanced laser desorption/ionisation time-of-flight mass spectrometry (SELDI-TOF-MS) was used to obtain the soluble protein profiles of Longissimus thoracis muscles. The pure breeds showed differences among the studied meat quality traits (pHu, drip loss, androstenone, marbling, intramuscular fat, texture, and moisture), but no significant differences were detected in sensory analysis. Associations between protein peaks obtained with SELDI-TOF-MS and meat quality traits, mainly water holding capacity, texture and skatole were observed. Of these peaks, a total of 10 peaks from CM10 array and 6 peaks from Q10 array were candidate soluble protein markers for pork loin quality. The developed models explained a limited proportion of the variability, however they point out interesting relationships between protein expression and meat quality

Analysis of raw hams using SELDI-TOF-MS to predict the final quality of dry-cured hams

The relationship between protein profiles of Gluteus medius (GM) muscles of raw hams obtained from 4 pure breed pigs (Duroc, Large White, Landrace, and Piétrain) with the final quality of the Semimembranosus and Biceps femoris muscles of dry-cured hams was investigated. As expected, Duroc hams showed higher levels of marbling and intramuscular fat content than the other breeds. Piétrain hams were the leanest and most conformed, and presented the lowest salt content in dry-cured hams. Even if differences in the quality traits (colour, water activity, texture, composition, intramuscular fat, and marbling) of dry-cured hams were observed among the studied breeds, only small differences in the sensory attributes were detected. Surface-enhanced laser desorption/ionisation time-of-flight mass spectrometry (SELDI-TOF-MS) was used to obtain the soluble protein profiles of GM muscles. Some associations between protein peaks obtained with SELDI-TOF-MS and quality traits, mainly colour (b*) and texture (F0, Y2, Y90) were observed. Candidate protein markers for the quality of processed dry-cured hams were identified

Active packaging containing nisin and high pressure processing as post-processing listericidal treatments for convenience fermented sausages

Listeria monocytogenes was inoculated on the surface of sliced fermented sausages with no added sodium salt. The pathogen was progressively inactivated during the product shelf life (90 days). Antimicrobial packaging of fermented sausages with PVOH films containing nisin induced a more pronounced reduction of L. monocytogenes counts during refrigerated storage. HPP alone (600 MPa, 5 min, 12 °C) had no antimicrobial effect against L. monocytogenes at the studied conditions. Combination of HPP with antimicrobial packaging did not produce any extra protection against L. monocytogenes compared to antimicrobial packaging alone. The lack of effect of HPP on L. monocytogenes was attributed to a protective effect exerted by the low water activity of the product and its lactate content. These results reflect that antimicrobial packaging with the inclusion of nisin as a natural antimicrobial could be considered as an effective method to reduce the levels of L. monocytogenes in sliced fermented sausages with no added sodium salt

Consumer acceptance of high pressure processed beef-based chilled ready meals: The mediating role of food-related lifestyle factors

The aim of this research was to investigate the effects of high pressure processing (HPP) on consumer acceptance for chilled ready meals manufactured using a low-value beef cut. Three hundred consumers evaluated chilled ready meals subjected to 4 pressure treatments and a non-treated control monadically on a 9-point scale for liking for beef tenderness and juiciness, overall flavour, overall liking, and purchase intent. Data were also collected on consumers' food consumption patterns, their attitudes towards food by means of the reduced food-related lifestyle (FRL) instrument, and socio-demographics. The results indicated that a pressure treatment of 200 MPa was acceptable to most consumers. K-means cluster analysis identified 4 consumer groups with similar preferences, and the optimal pressure treatments acceptable to specific consumer groups were identified for those firms that would wish to target attitudinally differentiated consumer segments

El proyecto ‘Ecosportech’ como ejemplo de universidad emprendedora. Una experiencia a base del ‘Problem Based Learning’

El objetivo de este artículo es presentar el proyecto EcoSPORTech, cuya finalidad es la creación de una empresa social con jóvenes para la realización de actividades deportivas/ocio en el medio natural, integrando las nuevas tecnologías. Este proyecto supone una colaboración interdisciplinaria dentro de la Universidad de Vic, entre las facultades de Empresa y Comunicación (FEC), la de Ciencias de la Salud y el Bienestar (FCSB) y la de Educación (FE) e integra un equipo de profesionales procedentes de los ámbitos de la empresa, el marketing, el periodismo, el deporte y la terapia ocupacional. Estos profesores formarán al grupo de jóvenes con los que se creará la empresa y dirigirán la misma. Esta empresa (cooperativa) se integra en el vivero de empresas sociales que se está creando en la Universidad de Vic.

Aproximaciones teóricas conceptuales para una definición del estado del arte de la comunicación de los destinos turísticos

RESUMEN. El presente artículo pretende poner de relieve el cambio de registro experimentado por la comunicación de los destinos turísticos en los últimos diez años. Las posibilidades ofrecidas por las Tecnologías de la Información y la Comunicación (TIC), en consonancia con un uso renovado de la estrategia comunicativa, señalan la necesidad de definir un nuevo estado del arte para el binomio comunicación y turismo. En efecto, el uso de soportes meramente informativos y/o promocionales ha evolucionado hacia nuevas lógicas de producción, más propias del ámbito corporativo, situando al turista en el centro de la estrategia de comunicación. Así las cosas, los términos “persuasión” y “emoción” pasan a definir las nuevas coordenadas de trabajo para la comunicación de los destinos turísticos.

Place branding : a conceptual and theoretical framework

Within the context of rising competition between territories, identity has become the most important element of recognition, differentiation and commodification in the communicative process within which cities, regions and countries position themselves. Geographical spaces thus compete in terms of this identity, which is then subjected to fierce comparison and competition (Nogué, 1999; Anholt, 2007a). The territorial brand thus entails the reinvention of places through a process of brand construction (branding) based on the promotion of the individual and collective identities of geographical spaces; these identities, in turn, are imbued with the intangible factors associated with their respective territorial identities.

Museos y Content Marketing. Hacia un nuevo modelo de generación de contenidos culturales

Los museos vienen aplicando, desde hace ya bastantes décadas, la teoría y práctica de la difusión cultural para generar contenidos culturales que faciliten la accesibilidad cognitiva y emocional de los visitantes a sus colecciones. Últimamente están apareciendo campañas y acciones de comunicación comercial que, lideradas desde los departamentos de comunicación de los museos, están creando unos contenidos cuyo objetivo final es publicitario, sirviéndose para ello de la técnica del Content Marketing. Este artículo presenta este nuevo modelo de generación de contenidos, mediante el análisis de algunos casos internacionales en los que se ha aplicado de forma exitosa.

Resiliencia en familias con hijos que padecen trastornos del espectro autista

Amb aquest treball pretenem començar a investigar la relació que existeix entre el desenvolupament de la resiliència en pares que tenen fills que pateixen trastorns de l'espectre autista i la evolución d’aquests nens, en els tres aspectes més alterats en aquesta patologia, com són la interacció social, la comunicació i els patrons de conducta, interessos i activitats restrictives, repetitives i estereotipades.

Assessing the impact of high-pressure processing on selected physical and biochemical attributes of white cabbage (Brassica oleracea L. var. capitata alba)

The aim of this study was to investigate the effect of combined pressure/temperature treatments (200, 400 and 600 MPa, at 20 and 40 °C) on key physical and chemical characteristics of white cabbage (Brassica oleracea L. var. capitata alba). Thermal treatment (blanching) was also investigated and compared with high-pressure processing (HPP). HPP at 400 MPa and 20–40 °C caused significantly larger colour changes compared to any other pressure or thermal treatment. All pressure treatments induced a softening effect, whereas blanching did not significantly alter texture. Both blanching and pressure treatments resulted in a reduction in the levels of ascorbic acid, effect that was less pronounced for blanching and HPP at 600 MPa and 20–40 °C. HPP at 600 MPa resulted in significantly higher total phenol content, total antioxidant capacity and total isothiocyanate content compared to blanching. In summary, the colour and texture of white cabbage were better preserved by blanching. However, HPP at 600 MPa resulted in significantly higher levels of phytochemical compounds. The results of this study suggest that HPP may represent an attractive technology to process vegetable-based food products that better maintains important aspects related to the content of health-promoting compounds. This may be of particular relevance to the food industry sector involved in the development of convenient novel food products with excellent functional properties

High pressure processing of swede (Brassica napus): Impact on quality properties

The effects of combined pressure/temperature treatments (200, 400 and 600 MPa, at 20 and 40 °C) on the physical and nutritional properties of swede roots (Brassica napus var. napobrassica) were assessed. Changes induced by high pressure processing (HPP) on the original properties of swede samples were compared with those produced by thermal treatment (blanching). All studied treatments altered the physical properties of swede, resulting in a loss of hardness and water binding capacity. The strongest alteration of texture was observed after HPP at 400 MPa, while 600 MPa was the treatment that better preserved the texture properties of swede. Blanching caused less total colour changes (ΔE) than HPP. Antioxidant properties of swede were measured as total antioxidant capacity, ascorbic acid and total phenol content. All treatments caused a loss of antioxidant capacity, which was less pronounced after HPP at 600 MPa and 20 °C and blanching. Four glucosinolates were detected in swede roots, glucoraphanin, progoitrin, glucobrassicanapin and glucobrassicin. Glucobrassicanapin and glucobrassicin contents were reduced with all studied treatments. Progoitrin content was not affected by blanching and HPP at 200 MPa. HPP at higher pressure levels (400 and 600 MPa), though, induced an increase of progoitrin levels. The results indicated that blanching and HPP at 600 MPa and 20 °C were the treatments that better preserved the original quality properties of swede.