Statistic Rate Monotonic Scheduling

In this paper we present Statistical Rate Monotonic Scheduling (SRMS), a generalization of the classical RMS results of Liu and Layland that allows scheduling periodic tasks with highly variable execution times and statistical QoS requirements. Similar to RMS, SRMS has two components: a feasibility test and a scheduling algorithm. The feasibility test for SRMS ensures that using SRMS' scheduling algorithms, it is possible for a given periodic task set to share a given resource (e.g. a processor, communication medium, switching device, etc.) in such a way that such sharing does not result in the violation of any of the periodic tasks QoS constraints. The SRMS scheduling algorithm incorporates a number of unique features. First, it allows for fixed priority scheduling that keeps the tasks' value (or importance) independent of their periods. Second, it allows for job admission control, which allows the rejection of jobs that are not guaranteed to finish by their deadlines as soon as they are released, thus enabling the system to take necessary compensating actions. Also, admission control allows the preservation of resources since no time is spent on jobs that will miss their deadlines anyway. Third, SRMS integrates reservation-based and best-effort resource scheduling seamlessly. Reservation-based scheduling ensures the delivery of the minimal requested QoS; best-effort scheduling ensures that unused, reserved bandwidth is not wasted, but rather used to improve QoS further. Fourth, SRMS allows a system to deal gracefully with overload conditions by ensuring a fair deterioration in QoS across all tasks---as opposed to penalizing tasks with longer periods, for example. Finally, SRMS has the added advantage that its schedulability test is simple and its scheduling algorithm has a constant overhead in the sense that the complexity of the scheduler is not dependent on the number of the tasks in the system. We have evaluated SRMS against a number of alternative scheduling algorithms suggested in the literature (e.g. RMS and slack stealing), as well as refinements thereof, which we describe in this paper. Consistently throughout our experiments, SRMS provided the best performance. In addition, to evaluate the optimality of SRMS, we have compared it to an inefficient, yet optimal scheduler for task sets with harmonic periods.

Cerebellar Learning in an Opponent Motor Controller for Adaptive Load Compensation and Synergy Formation

This paper shows how a minimal neural network model of the cerebellum may be embedded within a sensory-neuro-muscular control system that mimics known anatomy and physiology. With this embedding, cerebellar learning promotes load compensation while also allowing both coactivation and reciprocal inhibition of sets of antagonist muscles. In particular, we show how synaptic long term depression guided by feedback from muscle stretch receptors can lead to trans-cerebellar gain changes that are load-compensating. It is argued that the same processes help to adaptively discover multi-joint synergies. Simulations of rapid single joint rotations under load illustrates design feasibility and stability.

Properties of molecules in tunnel junctions

Molecular tunnel junctions involve studying the behaviour of a single molecule sandwiched between metal leads. When a molecule makes contact with electrodes, it becomes open to the environment which can heavily influence its properties, such as electronegativity and electron transport. While the most common computational approaches remain to be single particle approximations, in this thesis it is shown that a more explicit treatment of electron interactions can be required. By studying an open atomic chain junction, it is found that including electron correlations corrects the strong lead-molecule interaction seen by the ΔSCF approximation, and has an impact on junction I − V properties. The need for an accurate description of electronegativity is highlighted by studying a correlated model of hexatriene-di-thiol with a systematically varied correlation parameter and comparing the results to various electronic structure treatments. The results indicating an overestimation of the band gap and underestimation of charge transfer in the Hartree-Fock regime is equivalent to not treating electron-electron correlations. While in the opposite limit, over-compensating for electron-electron interaction leads to underestimated band gap and too high an electron current as seen in DFT/LDA treatment. It is emphasised in this thesis that correcting electronegativity is equivalent to maximising the overlap of the approximate density matrix to the exact reduced density matrix found at the exact many-body solution. In this work, the complex absorbing potential (CAP) formalism which allows for the inclusion metal electrodes into explicit wavefunction many-body formalisms is further developed. The CAP methodology is applied to study the electron state lifetimes and shifts as the junction is made open.

The human impacts of flower farm development in the Ethiopian Rift Valley region

The flower industry has a reputation for heavy usage of toxic chemicals and polluting the environment, enormous consumption of water, and poor working condition and low wage level in various parts of the world. It is unfortunate that this industry is adamant to change and repeating the same mistakes in Ethiopia. Because of this, - there is a growing concern among the general public and the international community about sustainability of the Ethiopian flower industry. Consequently, working conditions in the flower industry, impacts of wage income on the livelihoods of employees, coping strategies of low wage flower farm workers, impacts of flower farms on the livelihoods of local people and environmental pollution and conflict, were analysed. Both qualitative and quantitative research methods were employed. Four quantitative data sets: labour practice, employees’ income and expenditure, displaced household, and flower grower views survey were collected between 2010 and 2012. Robust regression to identify the determinants of wage levels, and Multinomial logit to identify the determinants of coping strategies of flower farm workers and displaced households were employed. The findings show the working conditions in flower farms are characterized by low wages, job insecurity and frequent violation of employees’ rights, and poor safety measures. To ensure survival of their family, land dispossessed households adopt a wide range of strategies including reduction in food consumption, sharing oxen, renting land, share cropping, and shifting staple food crops. Most experienced scarcity of water resources, lack of grazing areas, death of herds and reduced numbers of livestock due to water source pollution. Despite the Ethiopian government investment in attracting and creating conducive environment for investors, not much was accomplished when it comes to enforcing labour laws and environmental policies. Flower farm expansion in Ethiopia, as it is now, can be viewed as part of the global land and water grab and is not all inclusive and sustainable. Several recommendations are made to improve working conditions, maximize the benefits of flower industry to the society, and to the country at large.

Migration and hedonic valuation: The case of air quality

Conventional hedonic techniques for estimating the value of local amenities rely on the assumption that households move freely among locations. We show that when moving is costly, the variation in housing prices and wages across locations may no longer reflect the value of differences in local amenities. We develop an alternative discrete-choice approach that models the household location decision directly, and we apply it to the case of air quality in US metro areas in 1990 and 2000. Because air pollution is likely to be correlated with unobservable local characteristics such as economic activity, we instrument for air quality using the contribution of distant sources to local pollution-excluding emissions from local sources, which are most likely to be correlated with local conditions. Our model yields an estimated elasticity of willingness to pay with respect to air quality of 0.34-0.42. These estimates imply that the median household would pay $149-$185 (in constant 1982-1984 dollars) for a one-unit reduction in average ambient concentrations of particulate matter. These estimates are three times greater than the marginal willingness to pay estimated by a conventional hedonic model using the same data. Our results are robust to a range of covariates, instrumenting strategies, and functional form assumptions. The findings also confirm the importance of instrumenting for local air pollution. © 2009 Elsevier Inc. All rights reserved.

Man's search for meaning: The case of Legos

We investigate how perceived meaning influences labor supply. In a laboratory setting, we manipulate the perceived meaning of simple, repetitive tasks and find a strong influence on subjects' labor supply. Despite the fact that the wage and the task are identical across the conditions in each experiment, subjects in the less meaningful conditions exhibit reservation wages that are consistently much higher than the subjects in the more meaningful conditions. The result replicates across different types of tasks. Moreover, in the more meaningful conditions, subjects' productivity influences labor supply more strongly. © 2008 Elsevier B.V. All rights reserved.

Reacción en plántula a oidio Blumeria graminis f. sp. tritici de cultivares de trigo tetraploide, cultivares diferenciales y especies emparentadas con trigo

p.111-117

Violence and aggression in the emergency department: factors impinging on nursing research

This paper examines issues involved in the debate regarding the role of research in nursing. The authors take the example of violence and aggression in the emergency field to discuss methodological, philosophical, professional, logistical, power differentials and leadership theory that influence and explain the process of conducting research surrounding violence and aggression experienced by nurses working in emergency departments. The paper examines the importance of research and discusses practical issues that impinge or frustrate clinical nursing staff who wish to conduct original research.

How should sparse marine in situ measurements be compared to a continuous model: an example

This work demonstrates an example of the importance of an adequate method to sub-sample model results when comparing with in situ measurements. A test of model skill was performed by employing a point-to-point method to compare a multi-decadal hindcast against a sparse, unevenly distributed historic in situ dataset. The point-to-point method masked out all hindcast cells that did not have a corresponding in situ measurement in order to match each in situ measurement against its most similar cell from the model. The application of the point-to-point method showed that the model was successful at reproducing the inter-annual variability of the in situ datasets. Furthermore, this success was not immediately apparent when the measurements were aggregated to regional averages. Time series, data density and target diagrams were employed to illustrate the impact of switching from the regional average method to the point-to-point method. The comparison based on regional averages gave significantly different and sometimes contradicting results that could lead to erroneous conclusions on the model performance. Furthermore, the point-to-point technique is a more correct method to exploit sparse uneven in situ data while compensating for the variability of its sampling. We therefore recommend that researchers take into account for the limitations of the in situ datasets and process the model to resemble the data as much as possible.

Heterogeneity of impacts of high CO2 on the North Western European Shelf

The increase in atmospheric CO2 is a dual threat to the marine environment: from one side it drives climate change, leading to modifications in water temperature, circulation patterns and stratification intensity; on the other side it causes a decrease in marine pH (ocean acidification, or OA) due to the increase in dissolved CO2. Assessing the combined impact of climate change and OA on marine ecosystems is a challenging task. The response of the ecosystem to a single driver can be highly variable and remains still uncertain; additionally the interaction between these can be either synergistic or antagonistic. In this work we use the coupled oceanographic–ecosystem model POLCOMS-ERSEM driven by climate forcing to study the interaction between climate change and OA. We focus in particular on carbonate chemistry, primary and secondary production. The model has been run in three different configurations in order to assess separately the impacts of climate change on net primary production and of OA on the carbonate chemistry, which have been strongly supported by scientific literature, from the impact of biological feedbacks of OA on the ecosystem, whose uncertainty still has to be well constrained. The global mean of the projected decrease of pH at the end of the century is about 0.27 pH units, but the model shows significant interaction among the drivers and high variability in the temporal and spatial response. As a result of this high variability, critical tipping point can be locally and/or temporally reached: e.g. undersaturation with respect to aragonite is projected to occur in the deeper part of the central North Sea during summer. Impacts of climate change and of OA on primary and secondary production may have similar magnitude, compensating in some area and exacerbating in others.

Coupled Temperature-Displacement Modelling of Injection Stretch Blow Moulding of PET bottles using Buckley Model

This study presents a fully coupled temperature–displacement finite element modelling of the injection stretch-blow moulding (ISBM) process of polyethylene terephthalate (PET) bottles using ABAQUS with a view to optimising the process conditions. A physically-based material model (Buckley model) was used to predict the mechanical behaviour of PET at temperatures slightly above its glass transition temperature. A model incorporating heat transfer between the stretch rod, the preform and the mould was built using axisymmetric solid elements. Extensive finite element analyses were carried out to predict the deformation, the distribution and history of strain and temperature during ISBM of a 20 g–330 ml bottle, which was made in an in situ test on a Sidel SB06 machine. Comparisons of numerical results with the measurements demonstrate that the model can satisfactorily model the sidewall thickness and material distributions. It is also shown that significant non-linear differentials exist in temperature and strain in both bottle thickness and length directions during the process. This justifies the employment of a volume approach to accurately predict the final mechanical properties of the bottles governed by the orientation and crystallinity which are highly temperature and strain dependent.

Livelihood Strategies of Dock Workers in Durban, c. 1900-1959

This dissertation examines the livelihood strategies of African dock workers in Durban, South Africa, between the Anglo-Boer War and the 1959 strikes. These labourers did not conform to common conceptions of radical dock workers or conservative African migrant workers. While Marxist scholars have been correct to stress the working class consciousness of Durban’s dock workers, this consciousness was also more ambiguous. These workers and their leaders displayed a peculiar mix of concern for workers’ issues and defences of the rights and interests of African traders. Many of Durban’s dock workers were not only wage labourers. In fact, only a minority had wages as their only source of income. The Reserve economy played a role in sustaining the consumption levels of their households and, more importantly, more than half of the former dock workers interviewed for this research engaged in some form of commercial enterprise, often based on the pilferage and sale of cargoes. Some also teamed up with township women who sold pilfered goods while the men were at work. This combination of commercial strategies and wage labour has often been overlooked in the literature. By looking at these livelihood strategies, this dissertation considers how rural and urban economies interacted in households’ strategies and reinterprets the reproduction of labour and the household in order to move beyond dichotomies of proletarian versus rural consciousness. The dock workers’ households were neither proletarian households that were forced to reside in the countryside because of apartheid, nor traditional rural homesteads with a missing migrant member. The households were reproduced in three geographically separate spheres of production and consumption, none of which could reproduce the household on its own. These spheres were dependent on each other, but also separate, as physical distance gave the different household members some autonomy. Such multi-nodal households not only bridged the rural and the urban, but equally straddled the formal/informal divide. For many, their employment on the docks made their commercial enterprises possible, which allowed them to retire early from urban wage labour. Consequently, the interests of wage labourers could not be divorced from those of African small-scale entrepreneurs.

A stabilization mechanism of zirconia based on oxygen vacancies only

The microscopic mechanism leading to stabilization of cubic and tetragonal forms of zirconia (ZrO2) is analyzed by means of a self-consistent tight-binding model. Using this model, energies and structures of zirconia containing different vacancy concentrations are calculated, equivalent in concentration to the charge compensating vacancies associated with dissolved yttria (Y2O3) in the tetragonal and cubic phase fields (3.2 and 14.4% mol, respectively). The model is shown to predict the large relaxations around an oxygen vacancy, and the clustering of vacancies along the 111 directions, in good agreement with experiments and first principles calculations. The vacancies alone are shown to explain the stabilization of cubic zirconia, and the mechanism is analyzed. (C) 2002 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.

Welfare Effort and Poverty from the Monetary and Capabilities Approach: A Cross-Country Analysis in Latin American and the Caribbean (1990-2010)

There is abundant empirical evidence on the negative relationship between welfare effort and poverty. However, poverty indicators traditionally used have been representative of the monetary approach, excluding its multidimensional reality from the analysis. Using three regression techniques for the period 1990-2010 and controlling for demographic and cyclical factors, this paper examines the relationship between social spending per capita —as the indicator of welfare effort— and poverty in up to 21 countries of the region. The proportion of the population with an income below its national basic basket of goods and services (PM1) and the proportion of population with an income below 50% of the median income per capita (PM2) were the two poverty indicators considered from the monetarist approach to measure poverty. From the capability approach the proportion of the population with food inadequacy (PC1) and the proportion of the population without access to improved water sources or sanitation facilities (PC2) were used. The fi ndings confi rm that social spending is actually useful to explain changes in poverty (PM1, PC1 and PC2), as there is a high negative and signifi cant correlation between the variables before and after controlling for demographic and cyclical factors. In two regression techniques, social spending per capita did not show a negative relationship with the PM2. Countries with greater welfare effort for the period 1990-2010 were not necessarily those with the lowest level of poverty. Ultimately social spending per capita was more useful to explain changes in poverty from the capability approach.

Ab initio simulation of charged slabs at constant chemical potential

We present a practical scheme for performing ab initio supercell calculations of charged slabs at constant electron chemical potential mu, rather than at constant number of electrons N-e. To this end, we define the chemical potential relative to a plane (or "reference electrode") at a finite distance from the slab (the distance should reflect the particular geometry of the situation being modeled). To avoid a net charge in the supercell, and thus make possible a standard supercell calculation, we restore the electroneutrality of the periodically repeated unit by means of a compensating charge, whose contribution to the total energy and potential is subtracted afterwards. The "constant mu" mode enables one to perform supercell calculation on slabs, where the slab is kept at a fixed potential relative to the reference electrode. We expect this to be useful in modeling many experimental situations, especially in electro-chemistry. (C) 2001 American Institute of Physics.