Optofluidics enables compact tunable interferometer

An optofluidic interferometer - in which a beam propagates across an interface between fluid and air - modulates at high extinction ratios and is only microns in size.

Does customer satisfaction lead to improved brand equity? An empirical examination of two categories of retail brands

Purpose – The objective of the present research is to examine the relationship between consumers' satisfaction with a retailer and the equity they associate with the retail brand. Design/methodology/approach – Retail brand equity is conceptualized as a four-dimensional construct comprising: retailer awareness, retailer associations, retailer perceived quality, and retailer loyalty. Then the associative network memory model is applied from cognitive psychology to the specific context of the relationships between customer satisfaction and consumer-based retailer equity. A survey was undertaken using a convenience sample of shopping mall consumers in an Australian state capital city. The questionnaire used to collect data included an experimental design such that two categories of retailers were included in the study: department stores and specialty stores, with three retailers representing each category. The relationship between consumer-based retailer equity and customer satisfaction was examined using multivariate analysis of variance. Findings – Results indicate that retail brand equity varies with customer satisfaction. For department stores, each consumer-based retailer equity dimension varied according to customer satisfaction with the retailer. However, for specialty stores, only three of the consumer-based retailer equity dimensions, namely retailer awareness, retailer associations and retailer perceived quality, varied according to customer satisfaction level with the retailer. Originality/value – The principal contribution of the present research is that it demonstrates empirically a positive relationship between customer satisfaction and an intangible asset such as retailer equity.

Epidemiology of open- and closed-globe trauma presenting to Cairns Base Hospital, Queensland

Purpose: To review the epidemiology of serious ocular trauma presenting to Cairns Base Hospital, from the far north Queensland health districts. Methods: A retrospective study of cases from January 1995 to November 2002 inclusive. Cases were analysed with respect to demographics, cause and nature of injury, method of transport and time to and type of ophthalmic treatment, and visual outcomes. Results: There were 226 cases identified, including 71 open-globe and 155 closed-globe injuries. The annual rate of injury was 3.7 per 100 000 for open-globe and 11.8 per 100 000 in total. The Aboriginal and Torres Strait Islander population from the far north Queensland districts showed a disproportionate incidence, with 38% of the total number of injuries, despite representing only 12.3% of the population. Assault in the Aboriginal and Torres Strait Islander population resulted in 69.6% of injuries in men and 75.8% of injuries in women. Of all assaults 76.2% were alcohol-related. The majority (71.5%) of injuries in the Caucasian population were due to accidental blunt and sharp trauma. In total, 77.4% of injuries occurred in men, with an average age of 31 years. Of all open and closed injuries in the study, a final visual acuity of 6/12 or better was achieved in 47.8% of eyes and a final visual acuity of 6/60 or less occurred in 17.7% of patients, 20.8% patients were lost to follow up. In total, 14.1% of open injuries required enucleation/evisceration. Conclusions: The incidence of ocular trauma in far north Queensland is equal to other Australian populations. However, there is a disproportionately high incidence in the Aboriginal and Torres Strait Islander population. Alcohol-related assault is a significant cause of visual loss in the Aboriginal and Torres Strait Islander population. Closed-globe injuries are more common than open globe; however, the latter have poorer visual prognosis. Initial visual acuity of all injuries correlated with final visual acuity.

A wave equation technique for designing compact gradient coils

A primary purpose of this research is to design a gradient coil that is planar in construction and can be inserted within existing infrastructure. The proposed wave equation method for the design of gradient coils is novel within the field. it is comprehensively shown how this method can be used to design the planar x-, y-, and z-gradient wire windings to produce the required magnetic fields within a certain domain. The solution for the cylindrical gradient coil set is also elucidated. The wave equation technique is compared with the well-known target held method to gauge the quality of resultant design. In the case of the planar gradient coil design, it is shown that using the new method, a set of compact gradient coils with large field of view can be produced. The final design is considerably smaller in dimension when compared with the design obtained using the target field method, and therefore the manufacturing costs and materials required are somewhat reduced.

Compact ultra-wideband planar tapered slot antenna for use in a microwave imaging system

The design of an ultra-wideband planar tapered slot antenna for use in a circular cylindrical microwave imaging system is pre-sented. The antenna was designed assuming high dielectric substrate material Rogers RT6010LM to achieve its compact size. The developed antenna element (50 X 50 mm(2)) features a 10-dB return loss bandwidth from 2.75 GHz to more than 11 GHz. The gain of the antenna is between 3.5 and 9.4 dBi over the 3-10 GHz band. The experimental tests showed that the manufactured antenna element supports transmission of narrow pulses with negligible distortions, as required in the microwave imaging system. (c) 2006 Wiley Periodicals, Inc.

Design of a compact ultra-wideband antenna

A simple method for the design of ultra-wideband antennas in planar format is presented. This method is demonstrated for a high-dielectric-constant substrate material, which allows for a considerable antenna size reduction. Simulations are performed using Ansoft's High-Frequency Structure Simulator (HFSS) for antennas assuming Du-Pont951 (epsilon(r) = 7.8) and RT6010LM (epsilon(r) = 10.2) substrates. For the 1-mm-thick DuPont951, the designed antenna with 22 X 28 nun dimensions features a 10-dB return-loss band width front 2.7 GHz to more than 15 GHz. For the 0.64-mm-thick RT6010LM a 20 X 26 nun antenna exhibits a 10-dB return loss bandwidth from 3.1 to 15 GHz. Both antennas feature nearly omnidirectional properties across the whole 10-dB return-loss bandwidth. The validity of the presented UWB antenna design strategy is confirmed by measurements performed on a prototype developed on RT6010LM substrate. (c) 2006 Wiley Periodicals, Inc.

Design of compact directive ultra wideband antipodal antenna

In this paper, a novel design procedure for designing a compact UWB antipodal Vivaldi antenna is presented. The antenna operates over the UWB frequency, band from 3.1 to more than 10.6 GHz. Its measured far-field radiation is directive and its peak gain is 10.2 dBi in the specified band. The antenna pulse response shows negligible distortion, indicating that it can be useful in a precision ranging and imaging instrumentation. (c) 2006 Wiley Periodicals, Inc.

Whole brain irradiation following surgery or radiosurgery for solitary brain metastases: Mature results of a prematurely closed randomized Trans-Tasman Radiation Oncology Group trial (TROG 98.05)

We evaluated the effect of adjuvant whole brain irradiation (WBI) after surgery or radiosurgery for solitary brain metastases in a Phase III multicentre trial with randomization to 30-36 Gy WBI or observation. The study was closed early due to slow accrual after 19 patients (WBI 10, observation 9). There was no difference in CNS failure-free survival or overall survival between the arms. There was a trend to reduced CNS relapse with WBI (30% versus 78%, P = 0.12). Limited analysis of quality of life and neurocognitive function data revealed no evidence of difference between the arms. Our results are not inconsistent with two larger randomized trials and support the use of upfront WBI to decrease brain recurrence in this setting. (c) 2006 Elsevier Ireland Ltd. All rights reserved.

Methods for Categorical Longitudinal Survey Data: Understanding Employment Status of Australian Women

Many variables that are of interest in social science research are nominal variables with two or more categories, such as employment status, occupation, political preference, or self-reported health status. With longitudinal survey data it is possible to analyse the transitions of individuals between different employment states or occupations (for example). In the statistical literature, models for analysing categorical dependent variables with repeated observations belong to the family of models known as generalized linear mixed models (GLMMs). The specific GLMM for a dependent variable with three or more categories is the multinomial logit random effects model. For these models, the marginal distribution of the response does not have a closed form solution and hence numerical integration must be used to obtain maximum likelihood estimates for the model parameters. Techniques for implementing the numerical integration are available but are computationally intensive requiring a large amount of computer processing time that increases with the number of clusters (or individuals) in the data and are not always readily accessible to the practitioner in standard software. For the purposes of analysing categorical response data from a longitudinal social survey, there is clearly a need to evaluate the existing procedures for estimating multinomial logit random effects model in terms of accuracy, efficiency and computing time. The computational time will have significant implications as to the preferred approach by researchers. In this paper we evaluate statistical software procedures that utilise adaptive Gaussian quadrature and MCMC methods, with specific application to modeling employment status of women using a GLMM, over three waves of the HILDA survey.

Matching commercial clips from TV streams using a unique, robust and compact signature

One of critical challenges in automatic recognition of TV commercials is to generate a unique, robust and compact signature. Uniqueness indicates the ability to identify the similarity among the commercial video clips which may have slight content variation. Robustness means the ability to match commercial video clips containing the same content but probably with different digitalization/encoding, some noise data, and/or transmission and recording distortion. Efficiency is about the capability of effectively matching commercial video sequences with a low computation cost and storage overhead. In this paper, we present a binary signature based method, which meets all the three criteria above, by combining the techniques of ordinal and color measurements. Experimental results on a real large commercial video database show that our novel approach delivers a significantly better performance comparing to the existing methods.