Evaluating mortality using length-frequency data when growth parameters are poorly known

A method is presented through which the total mortality undergone by several fish stocks of the same species can be compared when growth parameters are poorly known or unknown. Whereas the estimate of Z obtained via the length-converted catch curve is highly sensitive to the input parameters K and L sub( infinity ), the ratio of Z estimates obtained for different stocks with the same combination of parameters is almost independent of these inputs, at least when the fit of the linear regression is good. The method is tested on simulated data and an application is presented using real data from the Lesser Antilles. It provides the possibility of qualitatively comparing several stocks in situations of scarce biological knowledge.

Length-weight relationships of coral reef fishes from the Alacran Reef, Yucatan, Mexico

Length-weight relationships were computed for 42 species of coral reef fishes from 14 families from the Alacran Reef (Yucatan, Mexico). A total of 1 892 individuals was used for this purpose. The fish species were caught by different fishing techniques such as fishhooks, harpoons, gill and trawl nets. The sampling period was from March 1998 to January 2000.

Length-weight relationship of fishes from coral reefs and lagoons of New Caledonia: an update

Length-weight relationships of 316 reef and lagoon fish from New Caledonia (SW Pacific Ocean) belonging to 68 families are computed. A total of 43,750 individuals was used for this purpose. Fish were sampled by different techniques such as rotenone poisoning, handline and bottom longline fishing, gill and trammel nets, and trawling in various isotopes (coral reefs, lagoon bottoms and mangroves).

Length-weight relationships of bivalves from coastal waters of Korea

Parameters a and b of the length (L)-weight (W) relationship W = a · Lb are presented for 17 commercial bivalve species collected from the southwest coastal waters of Korea. Estimates of b varied between 2.44 (Atrina pinnata japonica) and 3.31 (Scaphara broughtonii) with a mean of 2.891 (± 0.212). A total of 2 107 specimens were analyzed for this study. The length-weight relationship was isometric in most of the species.

Length-weight relationships for some important forage crustaceans from South Africa

The diet of marine animals is usually determined by stomach content analysis. Although partially digested prey fragments can often be identified to species level, it is difficult to estimate the original mass of the prey organism. This information, however, is essential for calculating both the total food intake as well as the relative contribution of each prey item. In this study we present regression equations that can be used to estimate the original mass of 18 common South African crustaceans from various indigestible fragments such as the carapace (length and width), chelae (length and width of left and right dactylus) and eye (length and width).

Offshore Migratory Corridors and Aerial Photogrammetric Body Length Comparisons of Southbound Gray Whales, Eschrichtius robustus, in the Southern California Bight, 1988–1990

Through most of their annual migration, gray whales, Eschrichtius robustus, remain within 10 km of shore, but in the Southern California Bight many individuals migrate much farther from shore. This paper summarizes aerial survey and photogrammetric efforts to determine body lengths and temporal and spatial distributions of migratory gray whales in the southern portion of the Southern California Bight. Aerial surveys were flown along 13 east–west transects between lat. 32°35′N and 33°30′N during the southbound gray whale migratory seasons of 1988–90 in the Southern California Bight. Photogrammetry was used to obtain body length estimates of animals during some of the surveys. A total of 1,878 whales in 675 groups were sighted along 25,440 km of transect distance flown and 217 body lengths were measured. Using position and heading data, three major migratory pathways or corridors in the southern portion of the bight are defined. Those migrating offshore were split almost evenly between two corridors along the west sides of Santa Catalina and San Clemente Islands. These corridors converge on the mainland coast between San Diego and the United States–Mexico border. No whales larger than 11.5 m were photographed within 30 km of the mainland coast, suggesting that smaller, and presumably younger, whales use the coastal migratory corridor through the California Bight.

Mercúrio total em Orthopristis ruber (Haemulidae) de quatro regiões costeiras do Estado do Rio de Janeiro, Brasil

O objetivo do presente estudo foi investigar as concentrações de mercúrio total (HgT) nos músculos de Orthopristis ruber de quatro ecossitemas costeiros e identificar possíveis correlações existentes entre comprimento, peso, sexo, estação do ano e índices biológicos. O HgT foi analisado nas regiões de Cabo Frio (CF, n=31), Baía de Guanabara (BG, n=61), Baía de Sepetiba (BS, n=43) e Baía da Ilha Grande (BIG, n=32), as quais apresentam diferentes níveis de degradação ambiental. A BG recebe grande quantidade de efluentes domésticos e industriais de toda região metropolitana do Rio de Janeiro e tem sido considerada como uma das áreas mais poluídas do Brasil. Já na BS, a intensa atividade metalúrgica no seu entorno faz com que esta possa ser tida com nível de degradação intermadiária, enquanto CF e BIG são duas áreas vistas como áreas bem preservadas. As concentrações de HgT foram determinadas através de CV-AAS (FIMS - 400,Perkin Elmer) - utilizando boridreto de sódio como agente redutor. Foi utilizado DORM 3 (National Research Council, Canada) como material de referência (média da recuperação DP =99,2 4,9 %). As concentrações médias de HgT DP para BIG e CF foram, respectivamente, 209,8 118,9 ng/g, e 199,9 88,2 ng/g. Estas regiões apresentaram concentrações significativamente mais elevadas, enquanto a BG mostrou concentrações intermediárias (112,9 88,0 ng/g; ANCOVA, p<0,03). Por outro lado, a BS foi a região com as menores concentrações de HgT (11,3 11,5 ng/g). Tais resultados sugerem que, mesmo sendo áreas degradadas, o HgT não está totalmente biodisponível para BG e BS. Ademais, provavelmente as correntes oceânicas são uma fonte de mercúrio para CF e BIG, carreando mercúrio biodisponível para essas áreas. Para BG análises adicionais foram feitas a fim de identificar a acumulação de HgT ao longo do desenvolvimento ontogenético de O. ruber, uma vez que as concentrações do metal foram maiores em adultos do que em juvenis (PERMANOVA, p< 0,0001). As concentrações de HgT foram positivamente relacionadas tanto com o comprimento (Spearman test; r = 0,85; p <0,001) quanto com o peso (Spearman test; r =0,85; p <0,001) dos peixes da BG, mostrando que o O.ruber acumula HgT ao longo da vida. Diferenças entre sexos foram encontradas apenas para os O. ruber da BIG, onde fêmeas (300 ng/g) apresentaram maiores concentrações de HgT que os machos (~150 ng/g). Dentre os índices biológicos analisados, o índice gonadossomático foi o de maior relevância devido sua correlação negativa entre os níveis de HgT com todos os dados em conjunto (p<0.001), tanto para fêmeas (p<0.001) quanto para machos (p<0.02), sugerindo que o mercúrio pode afetar negativamente a reprodução de O.ruber.

Effects of density-dependence and sea surface temperature on interannual variation in length-at-age of chub mackerel (Scomber japonicus) in the Kuroshio-Oyashio area during 1970–1997

Annual mean fork length (FL) of the Pacific stock of chub mackerel (Scomber japonicus) was examined for the period of 1970–97. Fork length at age 0 (6 months old) was negatively correlated with year-class strength which fluctuated between 0.2 and 14 billion in number for age-0 fish. Total stock biomass was correlated with FL at age but was not a significant factor. Sea surface temperature (SST) between 38–40°N and 141–143°E during April–June was also negatively correlated with FL at age 0. A modified von Bertalanffy growth model that incorporated the effects of population density and SST on growth was well fitted to the observed FL at ages. The relative FL at age 0 for any given year class was maintained throughout the life span. The variability in size at age in the Pacific stock of chub mackerel is largely attributable to growth during the first six months after hatching.

Amplified fragment length polymorphism analysis to identify the genetic structure of the Gymnocypris przewalskii (Kessler, 1876) population from the Qinghai Basin, China

Amplified fragment length polymorphism (AFLP) was used to analyse the genetic structure of 45 individuals of Gymnocypris przewalskii (Kessler, 1876), an endangered and state-protected rare fish species, from three areas [the Heima (HM), Buha (BH) and Shaliu rivers (SL), all draining into Qinghai Lake]. A total of 563 polymorphic loci were detected. The HM, BH and SL populations have 435, 433 and 391 loci, respectively (Zhu and Wu, 1975), which account for 77.26%, 76.91% and 69.45% of the total number of polymorphic loci of each population, respectively. The Nei indices of genetic diversities (H) of the three populations were calculated to be 0.2869 (HM), 0.2884 (BH) and 0.2663 (SL), respectively. Their Shannon informative indices are 0.4244, 0.4251 and 0.3915, respectively. Research results show that the mean genetic distance between HM and BH is the smallest (0.0511), between BH and SL is the second shortest (0.0608), and between HM and SL is the largest (0.0713), with the mean genetic distance among the three populations being over 0.05. Data mentioned above indicate that the three populations have a certain genetic differentiation. The total genetic diversity (H-t = 0.3045) and the mean value of genetic diversity within the population (H-s = 0.2786) indicate that the variations have mainly come from within the population.

A lattice dynamical treatment for the total potential energy of single-walled carbon nanotubes and its applications: relaxed equilibrium structure, elastic properties, and vibrational modes of ultra-narrow tubes

In this paper, we propose a lattice dynamic treatment for the total potential energy of single-walled carbon nanotubes (SWCNTs) which is, apart from a parameter for the nonlinear effects, extracted from the vibrational energy of the planar graphene sheet. The energetics, elasticity and lattice dynamics are treated in terms of the same set of force constants, independently of the tube structures. Based upon this proposal, we have investigated systematically the relaxed lattice configuration for narrow SWCNTs, the strain energy, the Young's modulus and Poisson ratio, and the lattice vibrational properties with respect to the relaxed equilibrium tubule structure. Our calculated results for various physical quantities are nicely in consistency with existing experimental measurements. In particular, we verified that the relaxation effect makes the bond length longer and the frequencies of various optical vibrational modes softer. Our calculation provides evidence that the Young's modulus of an armchair tube exceeds that of the planar graphene sheet, and that the large diameter limits of the Young's modulus and Poisson ratio are in agreement with the experimental values of graphite; the calculated radial breathing modes for ultra-narrow tubes with diameters ranging between 2 and 5 angstrom coincide with the experimental results and the existing ab initio calculations with satisfaction. For narrow tubes with a diameter of 20 angstrom, the calculated frequencies of optical modes in the tubule's tangential plane, as well as those of radial breathing modes, are also in good agreement with the experimental measurements. In addition, our calculation shows that various physical quantities of relaxed SWCNTs can actually be expanded in terms of the chiral angle defined for the corresponding ideal SWCNTs.

Growth and characterization of 0.8-mu m gate length AlGaN/GaN HEMTs on sapphire substrates

AlGaN/GaN high electron mobility transistor (HEMT) structures were grown on 2 inch sapphire substrates by MOCVD, and 0.8-mu m gate length devices were fabricated and measured. It is shown by resistance mapping that the HEMT structures have an average sheet resistance of approximately 380 Omega/sq with a uniformity of more than 96%. The 1-mm gate width devices using the materials yielded a pulsed drain current of 784 mA/mm at V-gs=0.5 V and V-ds=7 V with an extrinsic transconductance of 200 mS/mm. A 20-GHz unity current gain cutoff frequency (f(T)) and a 28-GHz maximum oscillation frequency (f(max)) were obtained. The device with a 0.6-mm gate width yielded a total output power of 2.0 W/mm (power density of 3.33 W/mm) with 41% power added efficiency (PAE) at 4 GHz.

SOI optical switch matrix integrated with spot size converter (SSC) and total internal reflection (TIR) mirrors

SOI (Silicon on Insulator) based photonic devices has attracted more and more attention in the recent years. Integration of SOI optical switch matrix with isolating grooves, total internal reflection (TIR) mirrors and spot size converter (SSC) was studied. A folding re-arrangeable non-blocking 4x4 optical switch matrix and a blocking 16x16 matrix with TIR mirrors and SSC were fabricated on SOI wafer. The performaces, including extinction ratio and the crosstalk, are better than before. The insertion loss and the polarization dependent loss (PDL) at 1.55 mu m increase slightly with longer device length, more bend and intersecting waveguides. The insertion losses decrease 2 similar to 3 dB when anti-reflection films are added in the ends of the devices. The rise and fall times of the devices are 2.1 mu s and 2.3 mu s, respectively.

QTL Mapping for Frond Length and Width in Laminaria japonica Aresch (Laminarales, Phaeophyta) Using AFLP and SSR Markers

In Laminaria japonica Aresch breeding practice, two quantitative traits, frond length (FL) and frond width (FW), are the most important phenotypic selection index. In order to increase the breeding efficiency by integrating phenotypic selection and marker-assisted selection, the first set of QTL controlling the two traits were determined in F-2 family using amplified fragment length polymorphism (AFLP) and simple sequence repeat (SSR) markers. Two prominent L. japonicas inbred lines, one with "broad and thin blade" characteristics and another with "long and narrow blade" characteristics, were applied in the hybridization to yield the F-2 mapping population with 92 individuals. A total of 287 AFLP markers and 11 SSR markers were used to construct a L. japonica genetic map. The yielded map was consisted of 28 linkage groups (LG) named LG1 to LG28, spanning 1,811.1 cM with an average interval of 6.7 cM and covering the 82.8% of the estimated genome 2,186.7 cM. While three genome-wide significant QTL were detected on LG1 (two QTL) and LG4 for "FL," explaining in total 42.36% of the phenotypic variance, two QTL were identified on LG3 and LG5 for the trait "FW," accounting for the total of 36.39% of the phenotypic variance. The gene action of these QTL was additive and partially dominant. The yielded linkage map and the detected QTL can provide a tool for further genetic analysis of two traits and be potential for maker-assisted selection in L. japonica breeding.

Patient expectation is the most important predictor of discharge destination after primary total joint arthroplasty.

The purpose of this study was to identify preoperative predictors of discharge destination after total joint arthroplasty. A retrospective study of three hundred and seventy-two consecutive patients who underwent primary total hip and knee arthroplasty was performed. The mean length of stay was 2.9 days and 29.0% of patients were discharged to extended care facilities. Age, caregiver support at home, and patient expectation of discharge destination were the only significant multivariable predictors regardless of the type of surgery (total knee versus total hip arthroplasty). Among those variables, patient expectation was the most important predictor (P < 0.001; OR 169.53). The study was adequately powered to analyze the variables in the multivariable logistic regression model, which had a high concordance index of 0.969.

Percent body fat more associated with perioperative risks after total joint arthroplasty than body mass index

Copyright © 2014 Elsevier Inc. All rights reserved.Understanding the impact of obesity on elective total joint arthroplasty (TJA) remains critical. Perioperative outcomes were reviewed in 316 patients undergoing primary TJA. Higher percent body fat (PBF) was associated with postoperative blood transfusion, increased hospital length of stay (LOS) >3 days, and discharge to an extended care facility while no significant differences existed for BMI. Additionally, PBF of 43.5 was associated with a 2.4× greater likelihood of blood transfusion, PBF of 36.5 with a 1.9× greater likelihood for LOS >3 days, and PBF of 36.0 with a 1.4× greater likelihood for discharge to an extended care facility. PBF may be a more effective measure than BMI to use in screening for perioperative risks and acute outcomes associated with obese total joint patients.