Higienización de las manos: el cotidiano del profesional de la salud en una unidad de internación pediátrica

Objective. To describe behaviors related to hand cleaning in health professionals who work in the pediatric inpatient unit of a university hospital. Methodology. Descriptive study, in which the studied population was the sanitary staff who worked in a pediatric inpatient unit of a university hospital, there were a total of 43 people. Information was collected through an observation process and a survey applied on hand washing techniques, at the beginning of the study and a month later of the first one. Results. In just 7% of the observations, participants washed their hands before developing the procedure; one out of two followed the steps described in the technique. The most frequent failure in hand washing was presented in the step of rubbing the right hand palm over the left had dorsum, crossing the fingers and vice versa (18%). Conclusion. Participants of the study didn’t have the habit to wash their hands according to the recommended technique. Data suggest the necessity to promote educational actions to change staff behaviors and attitudes towards the steps and techniques of hand washing before and after performing any procedure.

Sterilization of immature blowflies (Calliphoridae) for use in larval therapy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fasceíte necrotizante: relato de dois casos

Necrotizing fasciitis is a rare dermatopathy that promotes subcutaneous tissue damage, associated to substantial morbidity and mortality if treatment is not initiated at the beginning of the condition. The objective of the present study is to report the occurrence of two cases of necrotizing fasciitis, one in a miniature female Pinscher and the other one in a female Poodle, both attended at the Veterinary Hospital of FMVZ/Unesp-Botucatu. The animals presented ulcerated, erythematous lesions with secretion and points of necrosis along fascial planes. Bacterial culture was positive for Streptococcus spp. The animals were treated with enrofloxacin, associated to topical cleaning of the lesions with saline solution and triclosan-based soap and rifampicin spray. Both animals presented total remission of lesions after approximately 15 days of treatment. The present report aims to alert veterinary clinicians to the severity of Streptococcus spp infections.

Quality and safety of pet treats: assessment of the microbial safety and quality of pet treats

The aim of this study was to evaluate the hygienic and sanitary conditions of pettreats from an export industry. The occurrence of Salmonella, enumerated sulfite-reducing Clostridium (SRC), coagulase-positive Staphylococcus (CPS) and total(TC) and thermotolerant coliforms (TTC) was studied. Of the 108 samples ana-lyzed, 22 were contaminated by some microorganism. TC were detected at twosamples (3.5 × 101and 4.5 × 101colony-forming units [cfu]/g), SRC in 19 samples(1.0 × 101to 1.3 × 105cfu/g) and Salmonella spp. at only one sample; CPS andTTC were not detected. These findings indicate the microbiological safety of mostitems, except for a mix of dried bovine offal, with 1.3 × 105cfu/g of SRC, and onemix of dehydrated bovine viscera contaminated with Salmonella. The current pro-duction processes and the food safety management system are adequate to guar-antee the production of microbiologically safe foods, but that some improvementscan still be made with regard to cleaning and disinfection and hygiene training.

Sistema informatizado para dispositivos móveis de coleta dos dados referentes à cesta básica do município de Botucatu/SP

The collection of prices for basic goods supply is very important for the population, based on the collection and processing of these data the CLI (Cost Living Index) is calculated among others, helping consumers to shop more rationally and with a clearer view of each product impact of each product on their household budget, not only food, but also cleaning products and personal hygiene ones. Nowadays, the project of collection of prices for basic goods supply is conducted weekly in Botucatu - SP through a spreadsheet. The aim of this work was to develop a software which utilized mobile devices in the data collection and storage phase, concerning the basic goods supply in Botucatu -SP. This was created in order to eliminate the need of taking notes in paper spreadsheets, increasing efficiency and accelerating the data processing. This work utilized the world of mobile technology and development tools, through the platform".NET" - Compact Framework and programming language Visual Basic".NET" was used in the handheld phase, enabling to develop a system using techniques of object oriented programming, with higher speed and reliability in the codes writing. A HP Pavilion dv3 personal computer and an Eten glofish x500+ handheld computer were used. At the end of the software development, collection, data storing and processing in a report, the phase of in loco paper spreadsheets were eliminated and it was possible to verify that the whole process was faster, more consistent, safer, more efficient and the data were more available.

Avaliação de sistemas de manejo de palhiço de cana-de-açúcar no campo e na indústria

This work presents and it evaluates the systems of crop of sugar-cane trash for energy ends, through studies accomplished in three industries of sugar and alcohol, of the State of São Paulo, as withdrawal in the field and crop partially integral with separation of the trash in the industry (cleaning the dry). it is Treated of a development of opportunities, because only when there is pulp shortage it is that remembers the energy use of the trash, which presents a larger cost for equivalent ton in energy again that the pulp of the sugar-cane, that already has a very spread trade in the section the sugar and alcohol. Another factor that should be outstanding is the environmental, because the Environmental Protocol exists, sanctioned by most of the producing of sugar-cane, that reduces the period for elimination burned of the sugar-cane before the crop implanted by the Law 11.241 of 2002. However it is important to highlight that the crop of the sugar-cane without it burns her previous, it increases the difficulty in the combat the pest denominated “cigarrinha-da-raiz”, turning necessary the retreat of part of the trash non beneficial for the soil, contributing like this, with the practice of removal of the trash for energy use. Of the obtained results it is ended that the most interesting modality economically, was the separation of the trash in the industry and that for better efficiency, the sugar-cane should go by a double process of blowing for cleaning, pointing out, however, that there was reduction of the capacity of transport of the sugar-cane as adult was the amount of trash partially in the crop integral.

Resistência à fadiga de infraestruturas de zircônia: influência da estratégia de cimentação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

EC84-406 Take Cover: A Guide to Selecting Furniture Fabrics

There are two general categories of furniture fabrics: those meant for use as slipcovers, and those for use as upholstery. Slipcovers are designed to fit snugly and yet be removable for cleaning. Upholstery fabrics are generally heavier; they are nailed or stapled directly to the furniture's frame or bonded to the padding. They are not removable. This publication is for persons considering an investment in upholstered furniture or upholstery fabric. It covers basic information on fabric components and construction to help the reader make a wise purchase.

Influence of the deposition parameters on the morphology and electrical conductivity of PANI/PSS self-assembled films

The influence of deposition parameters, namely polymer concentration and pH of the deposition solution, cleaning, and drying steps on the morphology and electrical characteristics of polyaniline and sulfonated polystyrene (PANI/PSS) nanostructured films deposited by the self-assembly technique is evaluated by UV-Vis spectroscopy, optical and atomic force microscopy, and electrical resistance measurements. It is found that stirring the cleaning solution during the cleaning step is crucial for obtaining homogenous films. Stirring of the cleaning solution also influences the amount of PANI adsorbed in the films. In this regard, the drying process seems to be less critical since PANI amount and film thickness are similar in films dried with N-2 flow or with an absorbent tissue. It is observed, however, that drying with N-2 flow results in rougher films. As an additional point, an assessment of the influence of the deposition method (manual versus mechanical) on the film characteristics was carried out. A significant difference on the amount of PANI and film thickness between films prepared by different human operators and by a homemade mechanical device was observed. The variability in film thickness and PANI adsorbed amount is smaller in films mechanically assembled. (c) 2007 Elsevier B.V. All rights reserved.

Prediction of culture performance of juvenile Litopenaeus vannamei by in vitro (pH-stat) degree of feed protein hydrolysis with species-specific enzymes

Rapid in vitro methods for measuring digestibility may be useful in analysing aqua feeds if the extent and limits of their application are clearly defined. The pH-stat protein digestibility routine with shrimp hepatopancreas enzymes was previously related to apparent protein digestibility with juvenile Litopenaeus vannamei fed diets containing different protein ingredients. The potential of the method to predict culture performance of shrimp fed six commercial feeds (T3, T4, T5, T6, T7 and T8) with 350 g kg(-1) declared crude-protein content was assessed. The consistency of results obtained using hepatopancreas enzyme extracts from either pond or clear water-raised shrimp was further verified in terms of reproducibility and possible diet history effects upon in vitro outputs. Shrimps were previously acclimated and then maintained over 56 days (initial mean weight 3.28 g) on each diet in 500-L tanks at 114 ind m(-2), clear water closed system with continuous renewal and mechanical filtering (50 mu m), with four replicates per treatment. Feeds were offered four times daily (six days a week) delivered in trays at feeding rates ranging from 4.0% to 7.0% of stocked shrimp biomass. Feed was accessible to shrimp 4 h daily for 1-h feeding period after which uneaten feed was recovered. Growth and survival were determined every 14 days from a sample of 16 individuals per tank. Water quality was monitored daily (pH, temperature and salinity) and managed by water back flushing filter cleaning every 7-10 days. Feeds were analysed for crude protein, gross energy, amino acids and pepsin digestibility. In vitro pH-stat degree of protein hydrolysis (DH%) was determined for each feed using hepatopancreas enzyme extracts from experimental (clear water) or pond-raised shrimp. Feeds resulted in significant differences in shrimp performance (P < 0.05) as seen by the differences in growth rates (0.56-0.98 g week(-1)), final weight and feed conversion ratio (FCR). Shrimp performance and in vitro DH% with pond-raised shrimp enzymes showed significant correlation (P < 0.05) for yield (R-2 = 0.72), growth rates (R-2 = 0.72-0.80) and FCR (R-2 = -0.67). Other feed attributes (protein : energy ratio, amino acids, true protein, non-protein nitrogen contents and in vitro pepsin digestibility) showed none or limited correlation with shrimp culture performance. Additional correlations were found between growth rates and methionine (R-2 = 0.73), FCR and histidine (R-2 = -0.60), and DH% and methionine or methionine+cystine feed contents (R-2 = 0.67-0.92). pH-stat assays with shrimp enzymes generated reproducible DH% results with either pond (CV <= 6.5%) or clear water (CV <= 8.5%) hepatopancreas enzyme sources. Moreover, correlations between shrimp growth rates and feed DH% were significant regardless of the enzyme origin (pond or clear water-raised shrimp) and showed consistent R-2 values. Results suggest the feasibility of using standardized hepatopancreas enzyme extracts for in vitro protein digestibility.

'Impulsive compulsivity' in obsessive-compulsive disorder: A phenotypic marker of patients with poor clinical outcome

Although traditionally obsessive-compulsive disorder (OCD) and impulse control disorders (ICD) have represented opposing ends of a continuum, recent research has demonstrated a frequent co-occurrence of impulsive and compulsive behaviours, which may contribute to a worse clinical picture of some psychiatric disorders. We hypothesize that individuals with 'impulsive' OCD as characterized by poor insight, low resistance, and reduced control towards their compulsions will have a deteriorative course, greater severity of hoarding and/or symmetry/ordering symptoms, and comorbid ICD and/or substance use disorders (SUD). The sample consisted of 869 individuals with a minimum score of 16 on the Yale-Brown Obsessive Compulsive Scale (Y-BOCS). Of these, 65 had poor insight, low resistance, and reduced control towards compulsions ('poor IRC') and 444 had preserved insight, greater resistance and better control over compulsions ('good IRC'). These two groups were compared on a number of clinical and demographic variables. Individuals with poor IRC were significantly more likely to have a deteriorative course (p < 0.001), longer duration of obsessions (p = 0.017), greater severity of symmetry/ordering (p < 0.001), contamination/cleaning (p < 0.001) and hoarding (p = 0.002) symptoms, and comorbid intermittent explosive disorder (p = 0.026), trichotillomania (p = 0.014) and compulsive buying (p = 0.040). Regression analysis revealed that duration of obsessions (p = 0.037) and hoarding severity (p = 0.005) were significant predictors of poor IRC. In the absence of specific measures for impulsivity in OCD, the study highlights the utility of simple measures such as insight, resistance and control over compulsions as a phenotypic marker of a subgroup of OCD with impulsive features demonstrating poor clinical outcome. (C) 2012 Elsevier Ltd. All rights reserved.

Magnetostratigraphy and mid-palaeolatitude VGP dispersion during the Permo-Carboniferous Superchron: results from Parana Basin (Southern Brazil) rhythmites

A detailed magnetostratigraphic and rock-magnetism study of two Late Palaeozoic rhythmite exposures (Itu and Rio do Sul) from the Itarare Group (Parana Basin, Brazil) is presented in this paper. After stepwise alterning-field procedures and thermal cleaning were performed, samples from both collections show reversed characteristic magnetization components, which is expected for Late Palaeozoic rocks. However, the Itu rocks presented an odd, flat inclination pattern that could not be corrected with mathematical methods based on the virtual geomagnetic pole (VGP) distributions. Correlation tests between the maximum anisotropy of the magnetic susceptibility axis (K1) and the magnetic declination indicated a possible mechanical influence on the remanence acquisition. The Rio do Sul sequence displayed medium to high inclinations and provided a high-quality palaeomagnetic pole (after shallowing corrections of f = 0.8) of 347.5 degrees E 63.2 degrees S (N = 119; A95 = 3.3; K = 31), which is in accordance with the Palaeozoic apparent wander pole path of South America. The angular dispersion (Sb) for the distribution of the VGPs calculated on the basis of both the 45 degrees cut-off angle and Vandamme method was compared to the best-fit Model G for mid-latitudes. Both of the Sb results are in reasonable agreement with the predicted (palaeo) latitudinal S-? relationship during the Cretaceous Normal Superchron (CNS), although the Sb value after the Vandamme cut-off has been applied is a little lower than expected. This result, in addition to those for low palaeolatitudes during the Permo-Carboniferous Reversed Superchron (PCRS) previously reported, indicates that the low secular variation regime for the geodynamo that has already been discovered in the CNS might have also been predominant during the PCRS.

Effectiveness of Tooth Wipes in Removing Babies' Dental Biofilm

Purpose: To assess the effectiveness of tooth wipes in removing dental biofilm from babies' anterior teeth, as well as to evaluate the babies' behaviour and the guardians' preference concerning hygiene methods. Materials and Methods: In this random blind cross-over study, 50 high caries risk babies, from 8 to 15 months old, were divided into two groups: babies with oral hygiene performed by caregivers (n = 25) or by their mothers (n = 25). The caregivers and mothers removed biofilm using three methods of oral hygiene (tooth wipes, toothbrushes and gauze), one in each experimental phase. Professional cleaning was done before each phase, which had 2 days of biofilm accumulation and 1 experimental day, when caregivers and mothers used one method to remove biofilnn. Examiners blinded to the study design assessed the biofilm index at baseline, prior to and following biofilm removal using each method. The babies' behaviour and the mothers'/caregivers' preference were assessed. Results: The tooth wipes, toothbrushes and gauze significantly reduced the amount of biofilm (P < 0.001). The mothers' group removed more biofilm than the caregivers' group, using toothbrushes or tooth wipes (P < 0.05). Babies in the mothers' group had better behaviour using tooth wipes than toothbrushes (P < 0.05). Mothers and caregivers preferred to use tooth wipes. Conclusions: Tooth wipes are effective in removing biofilrn from babies' anterior teeth and are the method best accepted by mothers, caregivers and babies.

Debris and smear removal in flattened root canals after use of different irrigant agitation protocols

Scanning electron microscopy (SEM) can be used to analyze the presence of debris and smear layer on the internal walls of root canal. This study evaluated the debris and smear removal in flattened root canals using SEM after use of different irrigant agitation protocols. Fifty mandibular incisors were distributed into five groups (n = 10) according to the irrigant agitation protocol used during chemomechanical preparation: conventional syringe irrigation with NaviTip needle (no activation), active scrubbing of irrigant with brush-covered NaviTip FX needle, manual dynamic irrigation, continuous passive ultrasonic irrigation, and apical negative pressure irrigation (EndoVac system). Canals were irrigated with 5 mL of 2.5% NaOCl at each change of instrument and received a final flush with 17% EDTA for 1 min. After instrumentation, the roots were split longitudinally and SEM micrographs at x 100 and x 1,000 were taken to evaluate the amount of debris and smear layer, respectively, in each third. Data were analyzed by KruskalWallis and Dunn's post-hoc tests (a = 5%). Manual dynamic activation left significantly (p < 0.05) more debris inside the canals than the other protocols, while ultrasonic irrigation and EndoVac were the most effective (p < 0.05) for debris removal. Regarding the removal of smear layer, there was no statistically significant difference (p > 0.05) either among the irrigant agitation protocols or between the protocolcanal third interactions. Although none of the irrigant agitation protocols completely removed debris and smear layer from flattened root canals, the machine-assisted agitation systems (ultrasound and EndoVac) removed more debris than the manual techniques. Microsc. Res. Tech. 75:781790, 2012. (C) 2011 Wiley Periodicals, Inc.

Measurement of the concentration and size of aerosol particles and identification of the sources in orthopedic surgeries

In this study, the measurement of the concentration and size of particles and the identification of their sources were carried out at five orthopedic surgeries. The aerosol concentration and particle size distribution, ranging from 0.3 mu m 10 mu m, were measured and related to the type of indoor activity. The handling of surgical linen and gowns, handling of the patient, use of electrosurgical apparatus, use of a bone saw, handling of equipment, and cleaning of the room were identified as the most important sources of particles, with each of these activities posing different risks to the health of the patients and workers. The results showed that most of the particles were above 0.5 mu m and that there was a strong correlation among all particles of sizes above 1 mu m. Particles with diameters in the range of 0.3 mu m-0.5 mu m had a good correlation only with particles in the ranges of 0.5 mu m-1.0 mu m and 1.0 mu m-3.0 mu m in three of the surgeries analyzed. Findings led to the conclusion that most of the events responsible for generating aerosol particles in an orthopedic surgery room are brief, intermittent, and highly variable, thus requiring the use of specific instrumentation for their continuous identification and characterization.