923 resultados para Classical F-test in two-way ANOVA
Resumo:
In this study it was evaluated the efficiency of the treatment of wet-processed coffee wastewater in upflow anaerobic sludge blanket (UASB) reactors in two stages, in bench scale, followed by post-treatment with activated sludge in batch. The first UASB reactor was submitted to an hydraulic retention time (HRT) of 6.2 d and organic loading rates (OLR) of 2.3 and 4.5g CODtotal (L d)-1, and the second UASB reactor to HRT of 3.1 d with OLR of 0.4 and 1.4g CODtotal (L d)-1. The average values of the affluent CODtotal increased from 13,891 to 27,926mg L-1 and the average efficiencies of removal of the CODtotal decreased from 95 to 91%, respectively, in the UASB reactors in two stages. The volumetric methane production increased from 0.274 to 0.323L CH4 (L reactor d)-1 with increment in the OLR. The average concentrations of total phenols in the affluent were of 48 and 163mg L-1, and the removal efficiencies in the UASB reactors in two stages of 92 and 90%, respectively, and increased to 97% with post-treatment. The average values of the removal efficiencies of total nitrogen and phosphorus were of 57 to 80% and 44 to 60%, respectively, in the UASB reactors in two stages and increased to 91 and 84% with the post-treatment.
Resumo:
The performance of two upflow anaerobic sludge blanket (UASB) reactors was evaluated in pilot scale (908 and 188 L), installed in series (R1 and R2), fed with swine wastewater with TSS around 5 and 13 g L-1. The UASB reactors were submitted to HDT of 36 and 18 h with VOL of 5.5 to 34.4 g COD (L d)-1 in the R1 and HDT of 7.5 e 3.7 h with VOL from 5.1 to 45.2 g COD (L d)-1 in the R2. The average removal efficiencies of COD ranged from 55 to 85% in the R1 and from 43 to 57% in the R2, resulting in values from 82 to 93% in the UASB reactors in two stage. Methane concentrations in the biogas were 69 to 74% with specific production from 0.05 to 0.27 L CH4 (g removedCOD)-1 in the R1 and of 0.10 to 0.12 L CH4 (g removedCOD)-1 in the R2. The average removal efficiencies were 61 to 75% for totalP, 39 to 69% for KN, 82 to 93% for orgN and 20 to 94% for Fe, Zn, Cu and Mn. The amN concentration were not reduced indicating the need to post-treatment for effluent disposal into water bodies. There were reductions of total coliforms from 99.8123 to 99.9989% and of thermotolerant coliforms from 99.9725 to 99.9999%. The conditions imposed to the UASB reactors in two stage provided high conversions of removedCOD into methane (up to 77%) and reductions of organic an inorganic pollution loads from swine wastewater.
Resumo:
This paper presents an HP-Adaptive Procedure with Hierarchical formulation for the Boundary Element Method in 2-D Elasticity problems. Firstly, H, P and HP formulations are defined. Then, the hierarchical concept, which allows a substantial reduction in the dimension of equation system, is introduced. The error estimator used is based on the residual computation over each node inside an element. Finally, the HP strategy is defined and applied to two examples.
Resumo:
Fireside deposits can be found in many types of utility and industrial furnaces. The deposits in furnaces are problematic because they can reduce heat transfer, block gas paths and cause corrosion. To tackle these problems, it is vital to estimate the influence of deposits on heat transfer, to minimize deposit formation and to optimize deposit removal. It is beneficial to have a good understanding of the mechanisms of fireside deposit formation. Numerical modeling is a powerful tool for investigating the heat transfer in furnaces, and it can provide valuable information for understanding the mechanisms of deposit formation. In addition, a sub-model of deposit formation is generally an essential part of a comprehensive furnace model. This work investigates two specific processes of fireside deposit formation in two industrial furnaces. The first process is the slagging wall found in furnaces with molten deposits running on the wall. A slagging wall model is developed to take into account the two-layer structure of the deposits. With the slagging wall model, the thickness and the surface temperature of the molten deposit layer can be calculated. The slagging wall model is used to predict the surface temperature and the heat transfer to a specific section of a super-heater tube panel with the boundary condition obtained from a Kraft recovery furnace model. The slagging wall model is also incorporated into the computational fluid dynamics (CFD)-based Kraft recovery furnace model and applied on the lower furnace walls. The implementation of the slagging wall model includes a grid simplification scheme. The wall surface temperature calculated with the slagging wall model is used as the heat transfer boundary condition. Simulation of a Kraft recovery furnace is performed, and it is compared with two other cases and measurements. In the two other cases, a uniform wall surface temperature and a wall surface temperature calculated with a char bed burning model are used as the heat transfer boundary conditions. In this particular furnace, the wall surface temperatures from the three cases are similar and are in the correct range of the measurements. Nevertheless, the wall surface temperature profiles with the slagging wall model and the char bed burning model are different because the deposits are represented differently in the two models. In addition, the slagging wall model is proven to be computationally efficient. The second process is deposit formation due to thermophoresis of fine particles to the heat transfer surface. This process is considered in the simulation of a heat recovery boiler of the flash smelting process. In order to determine if the small dust particles stay on the wall, a criterion based on the analysis of forces acting on the particle is applied. Time-dependent simulation of deposit formation in the heat recovery boiler is carried out and the influence of deposits on heat transfer is investigated. The locations prone to deposit formation are also identified in the heat recovery boiler. Modeling of the two processes in the two industrial furnaces enhances the overall understanding of the processes. The sub-models developed in this work can be applied in other similar deposit formation processes with carefully-defined boundary conditions.
Resumo:
Herbicide resistance was reported in Brazil almost ten years ago. One of the main weeds with herbicide resistance is wild poinsettia (Euphorbia heterophylla). This work evaluates the distribution of ALS-resistant E. heterophylla in two states in southern Brazil and determines the major contributing management causes for weed resistance selection in the area. E. heterophylla seeds from 148 sites located in Paraná and Rio Grande do Sul were sampled during 2001 and 2002. Farmers provided specific site data for weed control, tillage system, crop rotation and harvesting operations during previous years. ALS resistant E. heterophylla biotypes were found widely distributed in the survey area. Data analysis suggests seed dissemination is unlikely to explain the widespread distribution of resistance. The most probable factor for the selection of the resistant E. heterophylla is the persistent high use of ALS-inhibiting herbicides over time. Indirect evidence is presented demonstrating the need to educate legislators and farmers about the importance of herbicide mixtures as a strategy to prevent herbicide resistance.
Resumo:
Litterfall and transfer of nutrients was estimated in two tropical coastal forests of Brazil - the Atlantic and the Restinga Forests at Cardoso Island, São Paulo. Samples were collected monthly, from June 1990 to May 1991, using thirty 0.25 m2 traps. There were significant differences in litter production between the Atlantic Forest (6.3 t.ha-1.year-1) and the Restinga Forest (3.9 t.ha-1.year-1). Litterfall was continuous throughout the year with maximum in the beginning of the rainy season in both sites. The annual return of mineral elements through litter in the Atlantic Forest was (kg.ha-1): 101.8 N, 3.8 P, 20.3 K, 60.0 Ca, 18.0 Mg, and 14.6 S and in the Restinga Forest was: 27.5 N, 1.0 P, 6.5 K, 30.0 Ca, 10.9 Mg, and 6.6 S. The return, although small, is relevant due to the low fertility of the soils in those ecosystems, especially in Restinga. The Restinga Forest seems to be an ecosystem well adapted to oligotrophic conditions, lying among those presenting higher nutrient use efficiency.
Resumo:
The floral biology of Cordia multispicata (Boraginaceae) and Borreria alata (Rubiaceae) was studied in natural populations in a fragment of the Atlantic forest in Pernambuco, northeastern Brazil. Both species flower during almost the whole year. Cordia multispicata is a shrubby species with white, distylous and tubular flowers. Borreria alata is a herbaceous species. Its flowers are whitish, tubular and have a polymorphism in relation to the size of their style. Floral anthesis in both species begins at 6:00 a.m. Sugar concentration in the nectar was about 16% in C. multispicata and 30% in B. alata. Nine species of flies, mainly of the genus Palpada (Syrphidae), were observed visiting flowers of the two species. Seven of them were observed visiting and pollinating flowers of both C. multispicata and B. alata. Two species visited only flowers of C. multispicata, whereas no fly was exclusive to B. alata flowers. Both species have similar flower morphology, flowering time, habitats in the forest and establish populations very close to each other. These facts can favour the pollinators sharing and increase pollinator attraction.
Resumo:
This study was conducted in two fragments of "cerrado" stricto sensu in the Gerais de Balsas Colonization Project, located in southern Maranhão, Brazil. The objective was to evaluate the dynamics of the woody plant community, over seven years (1995-2002). Four transects of 160 × 20 m were monitored. All woody plants with a stem diameter > 3 cm, at 0.30 m above ground level, were recorded. In 1995, 983 and 1,177 stems were sampled in fragments 1 and 2, respectively; in 2002, 1057 and 1406 stems were sampled in the same fragments. In 1995, the Shannon diversity indices (H') were 3.07 and 3.33, in fragments 1 and 2, respectively, reaching their maximum value in 2002 of 3.11 and 3.35. The community of fragment 1 showed an increase of 7.5% in density and 4.4% in basal area between 1995 and 2002, while in fragment 2 there was an increment of 19.4% in density and 23.5% in basal area, over the same period. The annual increment in diameter was 0.13 cm year-1 and 0.17 cm year-1 in fragments 1 and 2, respectively. The mortality rate was 2.73% per year in fragment 1 and 4.88% per year in fragment 2, while the recruitment rate was 3.25% per year and 5.86% per year, respectively. The community presented high recruitment and mortality rates compared to the studies conducted in other sites, indicating a community that was highly dynamic in the period studied.
Resumo:
Tutkimus käsittelee Yrittäjyyskasvatuksen Mittariston -projektia, jossa tutkimuskohteena on peruskoulun ensimmäisen asteen luokan- ja aineenopettajien näkemys ja kokemus yrittäjyyskasvatuksen verkostoyhteistyöstä. Tutkimuksen tarkoituksena oli selvittää miten hyvin opettajat tuntevat verkostoyhteistyötä, mikä on heidän tietämyksensä yrittäjyyskasvatuksesta ja kuinka tämä näkyy heidän työssään ja opetuksessaan. Tutkimuksen otos on 450 opettajaa. Tulokset analysoitiin SPSS-tilastomenetelmäohjelmalla. Tilastollisina tutkimusmenetelminä käytettiin jakaumien frekvenssianalyysiä, Faktorianalyysin Pääkomponenttianalyysiä ja Kaksisuuntaista varianssianalyysia (Anova). Tutkimuksen johtopäätöksenä voidaan todeta, että opettajien tiedot yhteistyö-verkostojen tarjoamista palveluista ovat hyvin hajanaiset. Ongelma jatkuu helposti niin kauan kunnes opettajien koulutusohjelmaan tuodaan lisää yrittäjyyskasvatus- ja yrittäjyysopintoja. Tämä pitäisi huomioida myös tulevissa opetussuunnitelmissa. Tämän tutkimuksen tavoitteena oli tuoda esille Yrittäjyyskasvatuksen mittariston tulosten kautta yrittäjyyskasvatuksen nykytila, tuoda ratkaisuja ehdotusten kautta opetukseen ja herättää keskustelua yrittäjyyskasvatuksen parantamiseksi.
Resumo:
Structural differences between cerrado species with different leaf phenologies are linked to crown architecture, leaf production, and biomass allocation to shoots and leaves. The present study characterized crown structures and the patterns of biomass allocation to leaves and shoots in two woody cerrado species with contrasting leaf phenologies and quantified the irradiance reaching their leaves to determine the best period during the day for photosynthetic activity. The shoots and leaves of five individuals of both Annona coriacea (deciduous) and Hymenaea stigonocarpa (evergreen) were collected along a 50 m transect in a cerrado fragment within the urban perimeter of Catalão - GO, to determine their patterns of biomass allocation in their crowns. The evergreen H. stigonocarpa had significantly higher mean values of shoot inclination (SI), petiole length (PL), leaf area (LA), leaf display index (LDI), and individual leaf area per shoot (ILA), while the deciduous species A. coriacea had significantly higher leaf numbers (LN). The more complex crown of H. stigonocarpa had shoots in more erect positions (orthotropic), with intense self-shading within shoots; A. coriacea, on the other hand, had slanting (plagiotropic) shoots in the crown, allowing similar irradiance levels to all leaf surfaces. The production of plagiotropic shoots by the deciduous species (A. coriacea) is a strategy that enables its use of incident sunlight early in the morning and preventing excessive water loss or excessive irradiance. Hymenaea stigonocarpa (an evergreen), by contrast, had orthotropic shoots and uses intense self-shading as a strategy to avoid excessive irradiance, especially at midday. Differences in crown architectures between evergreen and deciduous species of cerrado sensu stricto can therefore be viewed as adaptations to the environmental light regime.
Resumo:
The organophosphorus insecticide Nuvacron (Monocrotophos) is a very toxic agent widely utilized in Brazilian agriculture. To evaluate the clastogenic potential of this insecticide, in vivo and in vitro micronucleus (MN) assay experiments were carried out on Swiss mice and on Chinese hamster ovary (CHO) cells, respectively. Nuvacron administered at doses of 2.5 and 5.0 mg/kg induced a statistically significant increase in the frequencies of MN detected in polychromatic bone marrow erythrocytes from animals (six/group) treated ip 24 h before. Exponentially growing CHAO cells were treated continuously (16h) with Nuvacron diluted in water to final concentrations of 1, 10, 100, 200, and 400 mug/ml. Three experiments were carried out using the cytokinesis-block method and a total of 6000 binucleated cells were scored to determine MN frequencies. A statistically significant increase in the frequencies of MN was observed for the cells treated with 1 and 10 mug/ ml Nuvacron. A marked decrease in cell proliferation rates was observed for CHO cultures treated with higher concentrations. These data demonstrate that Nuvacron has a genotoxic effect on both in vivo and in vitro mammalian test systems.
Resumo:
Variations in egg length were observed for two populations of cryptic species of Anastrepha fraterculus (Wiedemann). The eggs of type I flies were smaller than those of type II individuals. For both types, in regard to yolk mass extrusion, four classes of embryos were detected. Class 1: embryos that extrude masses at both extremities; class 2: embryos in which extrusion occurs only at the anterior pole; class 3: embryos that eliminate mass only at the posterior pole, and class 4: embryos that do not extrude any mass. Embryo class frequencies were similar for populations belonging to the same type, but different between types. Individual females may produce eggs from different embryo classes, but for any given female the pattern remains constant during a long period of oviposition. Variation in size of the extruded masses was similar for both populations. Individual females produced embryos with a small range of mass diameters, and different females produced masses of different mean size. However, individual mass size remained constant during oviposition. The results suggest the existence of genetic components involved in the control of this unusual process. Larvae of both types presented, just before eclosion, similar unusual behaviors: they ingest the anterior extruded mass, rotate 180°, absorb the posterior mass and eclose near the posterior pole. Data show that cryptic A. fraterculus type I and type II differs in regard to egg size as well as to the phenomenon of yolk mass extrusion
Resumo:
The karyotypes of two species of Psittacidae of the genus Aratinga, Aratinga guarouba and A. acuticaudata were studied for the first time. The metaphases were obtained using a short term culture of feather pulp. These karyotypes are compared with others of the genus and their karyological relationships in the Psittaciformes are discussed
Resumo:
Post-training intracerebroventricular administration of procaine (20 µg/µl) and dimethocaine (10 or 20 µg/µl), local anesthetics of the ester class, prolonged the latency (s) in the retention test of male and female 3-month-old Swiss albino mice (25-35 g body weight; N = 140) in the elevated plus-maze (mean ± SEM for 10 male mice: control = 41.2 ± 8.1; procaine = 78.5 ± 10.3; 10 µg/µl dimethocaine = 58.7 ± 12.3; 20 µg/µl dimethocaine = 109.6 ± 5.73; for 10 female mice: control = 34.8 ± 5.8; procaine = 55.3 ± 13.4; 10 µg/µl dimethocaine = 59.9 ± 12.3 and 20 µg/µl dimethocaine = 61.3 ± 11.1). However, lidocaine (10 or 20 µg/µl), an amide class type of local anesthetic, failed to influence this parameter. Local anesthetics at the dose range used did not affect the motor coordination of mice exposed to the rota-rod test. These results suggest that procaine and dimethocaine impair some memory process(es) in the plus-maze test. These findings are interpreted in terms of non-anesthetic mechanisms of action of these drugs on memory impairment and also confirm the validity of the elevated plus-maze for the evaluation of drugs affecting learning and memory in mice