A novel sensing technique for monitoring pitting corrosion of stainless steel type 316L

A novel electrochemically integrated multi-electrode array namely the wire beam electrode(WBE) in combination with noise signatures analysis has been designed to monitor pittingcorrosion of one of the best corrosion resistance ferrous alloys, stainless steel type 316L.From the direct correlation of electrochemical potential noise signatures and galvanic currentdistribution maps during pitting corrosion processes, two characteristic noise patterns wereobserved prior to stable pit formation: (i) the characteristic ‘peak’ of rapid potential transient,towards less negative direction, followed by recovery (termed noise signature I) was found tocorrelate with the disappearance of unstable anode; (ii) the characteristic noise pattern ofquick potential changes towards less negative direction followed by no recovery (termed noisesignature II) was found to correspond with the massive disappearance of minor anodes leadingto formation of highly localized major anodes in the galvanic current distribution maps.

International contact lens prescribing in 2005

This article presents our fifth annual survey of international contact lens prescribing trends. In the first half of 2005, we analyzed prescribing habits in 15 countries: Australia, Belgium, Canada, the Czech Republic, Germany, Greece, Japan, the Netherlands, New Zealand, Norway, Singapore, Russia, Sweden, the United Kingdom and the United States. In each country, we sent 1,000 surveys (or fewer in countries where this exceeded the total number of practitioners) to contact lens clinicians who were randomly selected from appropriate national registers.

Pressure-induced phase transition in hydrogen-bonded supramolecular adduct formed by cyanuric acid and melamine

Single-crystal samples of the 1:1 adduct between cyanuric acid and melamine (CA·M), an outstanding case of noncovalent synthesis, have been studied by Raman spectroscopy and synchrotron X-ray diffraction in a diamond anvil cell up to pressures of 15 GPa. The abrupt changes in Raman spectra around 4.4 GPa have provided convincing evidence for pressure-induced structural phase transition. This phase transition was confirmed by angle dispersive X-ray diffraction (ADXRD) experiments to be a space group change from C2/m to its subgroup P2₁/m. On release of pressure, the observed transition was irreversible, and the new high-pressure phase was fully preserved at ambient conditions. We propose that this phase transition was due to supramolecular rearrangements brought about by changes in the hydrogen bonding networks.

An introduction to computational intelligence paradigms

This chapter presents an introduction to computational intelligence (CI) paradigms. A number of CI definitions are first presented to provide a general concept of this new, innovative computing field. The main constituents of CI, which include artificial neural networks, fuzzy systems, and evolutionary algorithms, are explained. In addition, different hybrid CI models arisen from synergy of neural, fuzzy, and evolutionary computational paradigms are discussed.

Enhancing fuzzy inference system based criterion-referenced assessment with an application

An important and difficult issue in designing a Fuzzy Inference System (FIS) is the specification of fuzzy sets, and fuzzy rules. The aim of this paper is to demonstrate how an additional qualitative information, i.e., monotonicity property, can be exploited and extended to be part of an FIS designing procedure (i.e., fuzzy sets and fuzzy rules design). In this paper, the FIS is employed as an alternative to the use of addition in aggregating the scores from test items/tasks in a Criterion-Referenced Assessment (CRA) model. In order to preserve the monotonicity property, the sufficient conditions of the FIS is proposed. Our proposed FIS based CRA procedure can be viewed as an enhancement for the FIS based CRA procedure, where monotonicity property is preserved. We demonstrate the applicability of the proposed approach with a case study related to a laboratory project assessment task at a university, and the results indicate the usefulness of the proposed approach in the CRA domain.

On the use of fuzzy rule interpolation techniques for monotonic multi-input fuzzy rule base models

Constructing a monotonicity relating function is important, as many engineering problems revolve around a monotonicity relationship between input(s) and output(s). In this paper, we investigate the use of fuzzy rule interpolation techniques for monotonicity relating fuzzy inference system (FIS). A mathematical derivation on the conditions of an FIS to be monotone is provided. From the derivation, two conditions are necessary. The derivation suggests that the mapped consequence fuzzy set of an FIS to be of a monotonicity order. We further evaluate the use of fuzzy rule interpolation techniques in predicting a consequent associated with an observation according to the monotonicity order. There are several findings in this article. We point out the importance of an ordering criterion in rule selection for a multi-input FIS before the interpolation process; and hence, the practice of choosing the nearest rules may not be true in this case. To fulfill the monotonicity order, we argue with an example that conventional fuzzy rule interpolation techniques that predict each consequence separately is not suitable in this case. We further suggest another class of interpolation techniques that predicts the consequence of a set of observations simultaneously, instead of separately. This can be accomplished with the use of a search algorithm, such as the brute force, genetic algorithm or etc.

Fuzzy rule base assessment models : theoretical analyses and a case study

An assessment model is usually a mathematical model that produces a measuring index, in the form of a numerical score to a situation/object, with respect to the subject of measure. To allow a valid and useful comparison among various situations/objects according to their associated numerical scores to be made, two important properties, i.e., the monotone output property and output resolution properties, are essential in fuzzy inference-based assessment problems. In this paper, the conditions for a fuzzy assessment model to fulfill the monotone output property is investigated using a derivative approach. A guideline on how the input membership functions should be tuned is also provided. Besides, the output resolution property is defined as the derivative of the output of the assessment model with respect to the input, whereby the derivative should be greater than a minimum resolution. Based on the derivative, improvements to the output resolution property by refining the fuzzy production rules are suggested. A case study on the Bowles fuzzy RPN model to demonstrate the effectiveness of the properties is also included.

Optimization of gaussian fuzzy membership functions and evaluation of the monotonicity property of fuzzy inference systems

In this paper, two issues relating to modeling of a monotonicity-preserving Fuzzy Inference System (FIS) are examined. The first is on designing or tuning of Gaussian Membership Functions (MFs) for a monotonic FIS. Designing Gaussian MFs for an FIS is difficult because of its spreading and curvature characteristics. In this study, the sufficient conditions are exploited, and the procedure of designing Gaussian MFs is formulated as a constrained optimization problem. The second issue is on the testing procedure for a monotonic FIS. As such, a testing procedure for a monotonic FIS model is proposed. Applicability of the proposed approach is demonstrated with a real world industrial application, i.e., Failure Mode and Effect Analysis. The results obtained are analysis and discussed. The outcomes show that the proposed approach is useful in designing a monotonicity-preserving FIS model.

Building monotonicity-preserving fuzzy inference models with optimization-based similarity reasoning and a monotonicity index

In this paper, a novel approach to building a Fuzzy Inference System (FIS) that preserves the monotonicity property is proposed. A new fuzzy re-labeling technique to re-label the consequents of fuzzy rules in the database (before the Similarity Reasoning process) and a monotonicity index for use in FIS modeling are introduced. The proposed approach is able to overcome several restrictions in our previous work that uses mathematical conditions in building monotonicity-preserving FIS models. Here, we show that the proposed approach is applicable to different FIS models, which include the zero-order Sugeno FIS and Mamdani models. Besides, the proposed approach can be extended to undertake problems related to the local monotonicity property of FIS models. A number of examples to demonstrate the usefulness of the proposed approach are presented. The results indicate the usefulness of the proposed approach in constructing monotonicity-preserving FIS models.

A monotonicity index for the monotone fuzzy modeling problem

In this paper, the problem of maintaining the (global) monotonicity and local monotonicity properties between the input(s) and the output of an FIS model is addressed. This is known as the monotone fuzzy modeling problem. In our previous work, this problem has been tackled by developing some mathematical conditions for an FIS model to observe the monotonicity property. These mathematical conditions are used as a set of governing equations for undertaking FIS modeling problems, and have been extended to some advanced FIS modeling techniques. Here, we examine an alternative to the monotone fuzzy modeling problem by introducing a monotonicity index. The monotonicity index is employed as an approximate indicator to measure the fulfillment of an FIS model to the monotonicity property. It allows the FIS model to be constructed using an optimization method, or be tuned to achieve a better performance, without knowing the exact mathematical conditions of the FIS model to satisfy the monotonicity property. Besides, the monotonicity index can be extended to FIS modeling that involves the local monotonicity problem. We also analyze the relationship between the FIS model and its monotonicity property fulfillment, as well as derived mathematical conditions, using the Monte Carlo method.

An online pruning strategy for supervised ARTMAP-based neural networks

Identifying an appropriate architecture of an artificial neural network (ANN) for a given task is important because learning and generalisation of an ANN is affected by its structure. In this paper, an online pruning strategy is proposed to participate in the learning process of two constructive networks, i.e. fuzzy ARTMAP (FAM) and fuzzy ARTMAP with dynamic decay adjustment (FAMDDA), and the resulting hybrid networks are called FAM/FAMDDA with temporary nodes (i.e. FAM-T and FAMDDA-T, respectively). FAM-T and FAMDDA-T possess a capability of reducing the network complexity online by removing unrepresentative neurons. The performances of FAM-T and FAMDDA-T are evaluated and compared with those of FAM and FAMDDA using a total of 13 benchmark data sets. To demonstrate the applicability of FAM-T and FAMDDA-T, a real fault detection and diagnosis task in a power plant is tested. The results from both benchmark studies and real-world application show that FAMDDA-T and FAM-T are able to yield satisfactory classification performances, with the advantage of having parsimonious network structures.

Fuzzy ARTMAP and hybrid evolutionary programming for pattern classification

In this paper, an Evolutionary Artificial Neural Network (EANN) that combines the Fuzzy ARTMAP (FAM) network and a Hybrid Evolutionary Programming (HEP) model is introduced. The proposed FAM-HEP model, which combines the strengths of FAM and HEP, is able to construct its network structure autonomously as well as to perform learning and evolutionary search and adaptation concurrently. The effectiveness of the proposed FAM-HEP network is assessed empirically using several benchmark data sets and a real medical diagnosis problem. The performance of FAM-HEP is analyzed, and the results are compared with those of FAM-EP, FAM, and other classification models. In general, the results of FAM-HEP are better than those of FAM-EP and FAM, and are comparable with those from other classification models. The study also reveals the potential of FAM-HEP as an innovative EANN model for undertaking pattern classification problems in general, and a promising computerized decision support tool for tackling medical diagnosis tasks in particular.

Application of an adaptive neural network with symbolic rule extraction to fault detection and diagnosis in a power generation plant

Artificial neural networks have a good potential to be employed for fault diagnosis and condition monitoring problems in complex processes. In this paper, the applicability of the fuzzy ARTMAP (FAM) neural network as an intelligent learning system for fault detection and diagnosis in a power generation plant is described. The process under scrutiny is the circulating water (CW) system, with specific attention to the conditions of heat transfer and tube blockage in the CW system. A series of experiments has been conducted systematically to investigate the effectiveness of FAM in fault detection and diagnosis tasks. In addition, a set of domain rules has been extracted from the trained FAM network so that its predictions can be explained and justified. The outcomes demonstrate the benefits of employing FAM as an intelligent fault detection and diagnosis tool with an explanatory capability for monitoring and diagnosing complex processes in power generation plants.