Riboflavin analgs from Streptomyces davawensisas antiinfectives: mode of action, mechanism of resistance of the producer and metabolization by humans

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of sublethal doses of the insecticide imidacloprid on adaptive traits of Drosophila melanogaster: Response to treatment over and after 15 consecutive generations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of the probiotic Saccharomyces cerevisiae on ligature-induced periodontitis in rats

This study assessed the effects of the local use of Saccharomyces cerevisiae as monotherapy and as an adjuvant to the mechanical treatment of ligature-induced periodontitis in rats. Periodontitis was induced in 72 rats via the installation of a ligature around the mandibular first molar. After 7 d, the ligature was removed and the rats were placed in one of the following groups: no treatment (C; n = 18); scaling and root planing (SRP; n = 18); local irrigation with probiotics (PRO; n = 18); and SRP followed by local irrigation with probiotics (SRP/PRO; n = 18). Six rats from each group were killed at 7, 15 and 30 d. The histological characteristics, alveolar bone loss (ABL) and immunolabeling of tumor necrosis factor alpha (TNF-α), interleukin-1beta (IL-1β), interleukin-10 (IL-10) and TRAP on the furcation area of the first molar were assessed. The PRO group showed features of acceleration of the tissue-repair process during the entire experiment. On day 15, there was less ABL in the SRP/PRO group compared with the C group. There were fewer TRAP-positive cells in the SRP and SRP/PRO groups at 30 d. There was less immunostaining for TNF-α in the PRO and SRP/PRO groups and less immunostaining for IL-1β in the PRO group. However, there was more immunostaining for IL-10 in the PRO group on day 15. Local use of the probiotic did not result in any adverse effects on periodontal tissues. When used as monotherapy or as an adjuvant, the probiotic was effective at controlling periodontitis in rats.

Analysis of the biomechanical behavior of short implants: the photo-elasticity method

The aim of this study was to analyze the stress distribution of short implants supporting single unit or splinted crowns by the photo-elasticity method. Four photo-elastic models were produced: A (3.75×7mm); B (3.75×7mm, 3.75×7mm and 3.75×7mm); C (3.75×10mm, 3.75×7mm and 3.75×7mm); D (3.75×13mm, 3.75×7mm and 3.75×7mm). The prostheses were made with Ni-Cr alloy. A load of 100N in the axial and oblique directions was applied, totaling 380 applications, individually capturing their images in each model. The data were randomized and analyzed qualitatively and quantitatively by 2 examiners. The oblique loading was significantly more damaging. The increase in length was favorable for stress distribution (p<0.05). The splinting was beneficial for the transmission of stresses mainly (p<0.05). The splinting of the crowns, as well as increasing the length of the first implant and axial loading was most beneficial in the stress distribution. Short splinted implants behaved better than single unit implants. Increasing of the length of the first implant significantly improved the stress distribution in all analyzed situations.

The Duration of the Effects of Repeated Widespread Badger Culling on Cattle Tuberculosis Following the Cessation of Culling

Background: In the British Isles, control of cattle tuberculosis (TB) is hindered by persistent infection of wild badger (Meles meles) populations. A large-scale field trial—the Randomised Badger Culling Trial (RBCT)—previously showed that widespread badger culling produced modest reductions in cattle TB incidence during culling, which were offset by elevated TB risks for cattle on adjoining lands. Once culling was halted, beneficial effects inside culling areas increased, while detrimental effects on adjoining lands disappeared. However, a full assessment of the utility of badger culling requires information on the duration of culling effects. Methodology/Principal Findings: We monitored cattle TB incidence in and around RBCT areas after culling ended. We found that benefits inside culled areas declined over time, and were no longer detectable by three years post-culling. On adjoining lands, a trend suggesting beneficial effects immediately after the end of culling was insignificant, and disappeared after 18 months post-culling. From completion of the first cull to the loss of detectable effects (an average five-year culling period plus 2.5 years post-culling), cattle TB incidence was 28.7% lower (95% confidence interval [CI] 20.7 to 35.8% lower) inside ten 100 km2 culled areas than inside ten matched no-culling areas, and comparable (11.7% higher, 95% CI: 13.0% lower to 43.4% higher, p = 0.39) on lands #2 km outside culled and no-culling areas. The financial costs of culling an idealized 150 km2 area would exceed the savings achieved through reduced cattle TB, by factors of 2 to 3.5. Conclusions/Significance: Our findings show that the reductions in cattle TB incidence achieved by repeated badger culling were not sustained in the long term after culling ended and did not offset the financial costs of culling. These results, combined with evaluation of alternative culling methods, suggest that badger culling is unlikely to contribute effectively to the control of cattle TB in Britain.

Height variability from the MIROC - IPCC model for the 20th century compared to that of the TOPEX/POSEIDON altimeter

Planetary waves are key to large-scale dynamical adjustment in the global ocean as they transfer energy from the east to the west side of oceanic basins; they connect the forcing in the ocean interior with the variability at its boundaries: and they change the local heat content, thus coupling oceanic, atmospheric, and biological processes. Planetary waves, mostly of the first baroclinic mode, are observed as distinctive patterns in global time series of sea surface height anomaly (SSHA) and heat storage. The goal of this study is to compare and validate large-scale SSHA signals from coupled ocean-atmosphere general circulation Model for Interdisciplinary Research on Climate (MIROC) with TOPEX/POSEIDON satellite altimeter observations. The last decade of the models` time series is selected for comparison with the altimeter data. The wave patterns are separated from the meso- and large-scale SSHA signals by digital filters calibrated to select the same spectral bands in both model and altimeter data. The band-wise comparison allows for an assessment of the model skill to simulate the dynamical components of the observed wave field. Comparisons regarding both the seasonal cycle and the Rossby wave Held differ significantly among basins. When carried within the same basin, differences can occur between equal latitudes in opposite hemispheres. Furthermore, at some latitudes the MIROC reproduces biannual, annual and semiannual planetary waves with phase speeds and average amplitudes similar to those observed by the altimeter, but with significant differences in phase. (C) 2008 Elsevier Ltd. All rights reserved.

Conformational polymorphism of the antidiabetic drug chlorpropamide

In this paper, the main features of Raman spectroscopy, one of the first choice methods in the study of polymorphism in pharmaceuticals, are presented taking chlorpropamide as a case of study. The antidiabetic drug chlorpropamide (1-[4-chlorobenzenesulphonyl]-3-propyl urea), which belongs to the sulfonylurea class, is known to exhibit, at least, six polymorphic phases. These forms are characterized not only by variations in their molecular packing but also in their molecular conformation. In this study, the polymorphism of chlorpropamide is discussed on the basis of Raman scattering measurements and quantum mechanical calculations. The main spectroscopic features that fingerprint the crystalline forms are correlated with the corresponding crystalline structures. Using a theoretical approach on the energy dependence of the conformers, simulated molecular torsion angles are plotted versus the formation energy, which provides a satisfactory agreement between the torsion angles at the energy minima and the experimental values observed in the different solid forms of chlorpropamide. Copyright (C) 2011 John Wiley & Sons, Ltd.

Experimental investigations on the first Townsend coefficient in pure isobutane

In this work we present results of the first Townsend coefficient (alpha) in pure isobutane by measuring the current growth as a function of the electric field strength in a pulsed irradiation regime. A Resistive Plate Chamber (RPC)-like configuration was used. To validate this method, as well as to crosscheck the experimental apparatus, measurements of the alpha parameter were firstly carried out with pure nitrogen and the results compared to the accurate data available in the literature. The data obtained with isobutane in a field range from 145 Td up to 200 Td were well-matched to those calculated with Magboltz versions 2.7.1 and 2.8.6. The experimental consistency of these results with other published data in the range of 550-1300 Td was very good, as demonstrated by the use of the Korff parameterization. (C) 2012 Elsevier B.V. All rights reserved.

FEEDING HABITS OF THE ATLANTIC SPOTTED DOLPHIN, Stenella frontalis, IN SOUTHEASTERN BRAZIL

This study presents new information on the feeding habits of the Atlantic spotted dolphins, Stenella frontalis, in the Western South Atlantic. Nine stomach contents of S. frontalis incidentally caught in fishing operations conducted by the gillnet fleet based on main harbour of Cananeia (25 degrees 00' S; 47 degrees 55'W), southeastern Brazil, were analyzed. These specimens were captured between 2005 and 2007. A total of 1 422 cephalopod beaks, 147 otoliths and three crustaceans were recovered from the stomach contents. The dolphins assessed preyed on at least eight different fish species of the families Trichiuridae, Carangidae, Sparidae, Merluccidae, Engraulidae, Sciaenidae, Congridae and Scombridae, five cephalopod species of the families Loliginidae, Sepiolidae, Tremoctopodidae and Thysanoteuthidae, and one shrimp species of the Penaeidae family. Based on the analysis of the Index of Relative Importance (IRI), the Atlantic cutlassfish, Trichiurus lepturus, was the most important fish species represented. Of the cephalopods, the squid Doryteuthis plei was by far the most representative species. Several items were reported for the first time as prey of the S. frontalis: Xiphopenaeus kroyeri, Tremoctopus violaceus, Semirossia tenera, Merluccius hubbsi, Pagrus pagrus and Paralonchurus brasiliensis. S. frontalis presented teuthophagous and ichthyofagous feeding habits, with apparent predominance of the first, and preyed mainly on pelagic and demersal items.

Illustrated key for the identification of the known zoeal stages of brachyuran crabs (Crustacea: Decapoda) from tropical and subtropical Brazil, southwestern Atlantic

Approximately 370 brachyuran species have so far been recorded from the Brazilian coast, 123 of which have had their larval stages fully or partially described. The pictorial guide allows the identification of the first zoea of 110 species. The remaining 13 species with known larval stages are treated to the genus level because of difficulties in the morphological differentiation of closely related species.

Theoretical study of the absorption and nonradiative deactivation of 1-nitronaphthalene in the low-lying singlet and triplet excited states including methanol and ethanol solvent effects

The photophysics of the 1-nitronaphthalene molecular system, after the absorption transition to the first singlet excited state, is theoretically studied for investigating the ultrafast multiplicity change to the triplet manifold. The consecutive transient absorption spectra experimentally observed in this molecular system are also studied. To identify the electronic states involved in the nonradiative decay, the minimum energy path of the first singlet excited state is obtained using the complete active space self-consistent field//configurational second-order perturbation approach. A near degeneracy region was found between the first singlet and the second triplet excited states with large spin-orbit coupling between them. The intersystem crossing rate was also evaluated. To support the proposed deactivation model the transient absorption spectra observed in the experiments were also considered. For this, computer simulations using sequential quantum mechanic-molecular mechanic methodology was used to consider the solvent effect in the ground and excited states for proper comparison with the experimental results. The absorption transitions from the second triplet excited state in the relaxed geometry permit to describe the transient absorption band experimentally observed around 200 fs after the absorption transition. This indicates that the T-2 electronic state is populated through the intersystem crossing presented here. The two transient absorption bands experimentally observed between 2 and 45 ps after the absorption transition are described here as the T-1 -> T-3 and T-1 -> T-5 transitions, supporting that the intermediate triplet state (T-2) decays by internal conversion to T-1. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4738757]

Phylogenetic analysis of Codium species from Brazil, with the description of the new species C. pernambucensis (Bryopsidales, Chlorophyta)

The genus Codium comprises c. 125 species widely distributed in marine coastal environments throughout the world. Due to morphological plasticity, the taxonomic delimitation of Codium species can be difficult. Sequences of the first exon of the large subunit of RUBISCO (rbcL) have been used in the molecular delimitation of species and for phylogenetic purposes. In the present study, we complement previous morphological work on Brazilian Codium species with molecular systematics. Based on the partial rbcL sequences, seven species are recognized along the Brazilian coast: C. decorticatum, C. intertextum, C. isthmocladum, C. profundum, C. spongiosum, C. taylorii and the new species Codium pernambucensis. Ten unique sequences were obtained among the samples examined, which we used in combination with previously published sequences to infer molecular phylogenies using various methods. The resulting trees showed three principal monophyletic groupings: Clade A with species having a prostrate habit, not branched, and mostly with small, grouped utricles; Clade B primarily consisting of upright species with cylindrical branches and large individual utricles; and Clade C composed of upright species with cylindrical branches that are slightly flattened, and have intermediate-sized individual utricles. The Brazilian species grouped with morphologically similar taxa from other geographic localities, and are present in all three main clades. A new sprawling species, Codium pernambucensis is described based on morphology and molecular analyses.

Phylogenetic relationships of the genus Sibynophis (Serpentes: Colubroidea)

We present the results of the first molecular analysis of the phylogenetic affinities of the Asian colubroid genus Sibynophis. We recovered a sister-group relationship between Sibynophis and the New World Scaphiodontophis. Although Liophidium sometimes is associated with these genera, the relationship is distant. Morphological characters that Liophidium shares with Sibynophis and Scaphiodontophis are resolved as homoplasies that probably reflect the similarities of their specialized feeding habits. The traditional subfamily Sibynophiinae is elevated to the family-level, and Scaphiodontophiinae is placed in its synonymy.

Feeding habits of the atlantic spotted dolphin, Stenella frontalis, in southeastern Brazil

This study presents new information on the feeding habits of the Atlantic spotted dolphins, Stenella frontalis, in the Western South Atlantic. Nine stomach contents of S. frontalis incidentally caught in fishing operations conducted by the gillnet fleet based on main harbour of Cananéia (25°00'S; 47°55'W), southeastern Brazil, were analyzed. These specimens were captured between 2005 and 2007. A total of 1 422 cephalopod beaks, 147 otoliths and three crustaceans were recovered from the stomach contents. The dolphins assessed preyed on at least eight different fish species of the families Trichiuridae, Carangidae, Sparidae, Merluccidae, Engraulidae, Sciaenidae, Congridae and Scombridae, five cephalopod species of the families Loliginidae, Sepiolidae, Tremoctopodidae and Thysanoteuthidae, and one shrimp species of the Penaeidae family. Based on the analysis of the Index of Relative Importance (IRI), the Atlantic cutlassfish, Trichiurus lepturus, was the most important fish species represented. Of the cephalopods, the squid Doryteuthis plei was by far the most representative species. Several items were reported for the first time as prey of the S. frontalis: Xiphopenaeus kroyeri, Tremoctopus violaceus, Semirossia tenera, Merluccius hubbsi, Pagrus pagrus and Paralonchurus brasiliensis. S. frontalis presented teuthophagous and ichthyofagous feeding habits, with apparent predominance of the first, and preyed mainly on pelagic and demersal items.

A new approach for the dynamic modelling of the human knee

Mathematical models of the knee joint are important tools which have both theoretical and practical applications. They are used by researchers to fully understand the stabilizing role of the components of the joint, by engineers as an aid for prosthetic design, by surgeons during the planning of an operation or during the operation itself, and by orthopedists for diagnosis and rehabilitation purposes. The principal aims of knee models are to reproduce the restraining function of each structure of the joint and to replicate the relative motion of the bones which constitute the joint itself. It is clear that the first point is functional to the second one. However, the standard procedures for the dynamic modelling of the knee tend to be more focused on the second aspect: the motion of the joint is correctly replicated, but the stabilizing role of the articular components is somehow lost. A first contribution of this dissertation is the definition of a novel approach — called sequential approach — for the dynamic modelling of the knee. The procedure makes it possible to develop more and more sophisticated models of the joint by a succession of steps, starting from a first simple model of its passive motion. The fundamental characteristic of the proposed procedure is that the results obtained at each step do not worsen those already obtained at previous steps, thus preserving the restraining function of the knee structures. The models which stem from the first two steps of the sequential approach are then presented. The result of the first step is a model of the passive motion of the knee, comprehensive of the patello-femoral joint. Kinematical and anatomical considerations lead to define a one degree of freedom rigid link mechanism, whose members represent determinate components of the joint. The result of the second step is a stiffness model of the knee. This model is obtained from the first one, by following the rules of the proposed procedure. Both models have been identified from experimental data by means of an optimization procedure. The simulated motions of the models then have been compared to the experimental ones. Both models accurately reproduce the motion of the joint under the corresponding loading conditions. Moreover, the sequential approach makes sure the results obtained at the first step are not worsened at the second step: the stiffness model can also reproduce the passive motion of the knee with the same accuracy than the previous simpler model. The procedure proved to be successful and thus promising for the definition of more complex models which could also involve the effect of muscular forces.