Optimal placement of sensors/actuators in truss structures with known disturbances

An important stage in the solution of active vibration control in flexible structures is the optimal placement of sensors and actuators. In many works, the positioning of these devices in systems governed for parameter distributed is, mainly, based, in controllability approach or criteria of performance. The positions that enhance such parameters are considered optimal. These techniques do not take in account the space variation of disturbances. An way to enhance the robustness of the control design would be to locate the actuators considering the space distribution of the worst case of disturbances. This paper is addressed to include in the formulation of problem of optimal location of sensors and piezoelectric actuators the effect of external disturbances. The paper concludes with a numerical simulation in a truss structure considering that the disturbance is applied in a known point a priori. As objective function the C norm system is used. The LQR (Linear Quadratic Regulator) controller was used to quantify performance of different sensors/actuators configurations.

Experimental model of pulmonary carcinogenesis in Wistar rats

Purpose: To elaborate an experimental model of pulmonary carcinogenesis in Wistar rats. Methods: Male Rattus norvegicus albinus, Wistar lineage was carried through an intra-pulmonary instillation of the Benzo[a]pyrene (B[a]P) dilution in alcohol 70%, a polycyclic aromatic hydrocarbon widely known by its power of tumoral induction. Three experimental groups had been formed with 08 animals each: Control Group (Alcohol 70%); B[a]P Group 10 mg/kg; e B[a]P Group 20mg/ kg, submitted to euthanasia 08, 10, 12 and 14 weeks after the experimental procedure. The pulmonary sections had been colored by hematoxilin-eosin (HE) and submitted to the morphometrical analysis to describe the tissue alterations. Results: The presence of diffuse inflammatory alterations was observed in all groups, however, at the analysis of the pulmonary tissue of the experimental groups, it had been observed hyperplasic alterations (BALT hyperplasia), and in one of the animals of the experimental group 20mg/kg (12 weeks), it was noticed the presence of cellular epithelial tracheal pleomorphism, suggesting the adenocarcinoma formation in situ. Conclusion: The main secondary alterations to the intra-pulmonary instillation of B[a]P in Wistar rats were: cellular proliferation, inflammatory alterations of several degrees and nodular lymphoid hyperplasias. The association of an activator agent of the pulmonary metabolic reply is necessary to establish the ideal reply-dose to the development of the lung cancer.

Exclusion of known gene for enamel development in two Brazilian families with amelogenesis imperfecta

Amelogenesis imperfecta (AI) is a genetically heterogeneous group of diseases that result in defective development of tooth enamel. Mutations in several enamel proteins and proteinases have been associated with AI. The object of this study was to evaluate evidence of etiology for the six major candidate gene loci in two Brazilian families with AI. Genomic DMA was obtained from family members and all exons and exon-intron boundaries of the ENAM, AMBN, AMELX, MMP20, KLK4 and Amelotin gene were amplified and sequenced. Each family was also evaluated for linkage to chromosome regions known to contain genes important in enamel development. The present study indicates that the AI in these two families is not caused by any of the known loci for AI or any of the major candidate genes proposed in the literature. These findings indicate extensive genetic heterogeneity for non-syndromic AI.

Remodelação cardíaca induzida pelo tabagismo (tabaquismo)

Previous studies accomplished by our group suggest that tobacco smoke exposure results in cardiac remodeling, with progressive ventricular dysfunction. However, the mechanisms involved in this process are not known. Therefore, our laboratory has been trying to identify the potentials responsible mechanisms for cardiac remodeling induced by tobacco. The blood pressure increase, the renin-angiotensin system and the oxidative stress can modulate this process. On the other hand, the activation of MMP-2 or MMP-9, as well as lipid peroxidation, don't seem to participate of the morphologic and functional alterations induced by tobacco smoke exposure.

Germinação de sementes de pinho-cuiabano sob deficiência hídrica com diferentes agentes osmóticos

The species Schizolobium amazonicum (Huber ex Ducke) commonly known as pinho-cuiabano or paricá, is one of the trees in Amazonian area used for plantings in degraded areas, reforestations and agroforestry systems. The present work evaluated the germinative behaviour of seeds of Schizolobium amazonicum in relation to the hydric stress, defining their levels of tolerance to those limitations in the environment. The seeds were collected from 30 trees in Alta Floresta-MT and submitted the dormancy treatment by submersion into water at 100°C for 1 minute; followed by treatment with fungicide Ridomil and Cercobin 0,25% each, then being left to germinate in a BOD camera at 30°C under a photoperiod of 12 hours. For evaluating the effect of different water potentials in the germinative process, polyethylene glicol (PEG 6000) was used and the salts NaCI and CaCl 2 used to simulate saline stress. The seeds were put to soak in potentials of 0 (control); -0.1 ; -0.2; -0.3; -0.4 and -0.5MPa. For each treatment 5 repetitions of 20 seeds were used in gerbox, placed between filter paper moistened with 20 mL of PEG, NaCI and CaCl 2 solutions. The solutions were changed at intervals of 24 hours for maintenance of the potential. The evaluations of percentages and germination speed were carry out daily for 8 days, being considered germinated the seeds that presented a 2mm root extension or longer. The data were submitted to analysis of variance and averages compared by the Tukey test at 5% probability. It was concluded that osmotic potentials between -0.4 and -0.5MPa inhibited the germination of seeds of Schizolobium amazonicum completely. The osmotic stress caused by CaCl 2, and PEG injured the germination more than did the stress caused by NaCl.

Transmission network expansion planning considering uncertainty in generation and demand

This paper presents a mathematical model and a methodology to solve a transmission network expansion planning problem considering uncertainty in demand and generation. The methodology used to solve the problem, finds the optimal transmission network expansion plan that allows the power system to operate adequately in an environment with uncertainty. The model presented results in an optimization problem that is solved using a specialized genetic algorithm. The results obtained for known systems from the literature show that cheaper plans can be found satisfying the uncertainty in demand and generation. ©2008 IEEE.

Comentario a la presentación de José Antonio Ocampo: Los paradigmas del desarrollo en la historia latinoamericana"

Incluye Bibliografía

Comentario a la presentación de José Antonio Ocampo: Los paradigmas del desarrollo en la historia latinoamericana"

Incluye Bibliografía

Comentario a la presentação do José Antonio Ocampo: Os paradigmas do desenvolvimento na história latino-americana"

Incluye Bibliografía

Comentario a la presentação do José Antonio Ocampo: Os paradigmas do desenvolvimento na história latino-americana"

Incluye Bibliografía

Phenotypic characterization of Candida spp. isolates from chronic periodontitis patients

Aim: Several typing methods for Candida spp. have been suggested in the literature in order to distinguish isolates for studies about the virulence or infection routes of these microorganisms and, in particular, for epidemiological purposes. The aim of this study was to establish a comparison between the phenotypic profile of oral Candida isolates from periodontitis patients and control individuals. Methods: The morphotyping and biotyping of 35 C. albicans isolates obtained from chronic periodontitis patients and 48 isolates from control individuals were performed. For morphotyping, the isolates were plated on malt extract agar and incubated for 10 days. Sixteen different morphotypes were observed for C. albicans, the most frequently observed being 0000 and 0001. Results: Biotype 0000 (complete absence of fringe) was most prevalent among the isolates obtained from periodontitis patients compared to those from control individuals, with statistical significance. Biotyping revealed 5 different biotypes with higher prevalence of the biotype 357 among the isolates from control and periodontitis groups. Conclusions: The results obtained by biotyping of the isolates did not permit to differentiate a characteristic model related to periodontal disease, whilst the morphotype 0000 was most frequently isolated from periodontitis patients.

From capital surges to drought: seeking stability for emerging economies

Includes bibliography

Investigation of the metal/porcelain interface in LASER-welded Ni-Cr-Mo alloy

The interface formed between the metal and the porcelain of laser-welded Ni-Cr-Mo alloy was studied on a metallurgical basis. The characterization was carried out by using optical microscope, electron scan microscopy and X-ray dispersive spectroscopy techniques and mechanical three-point flexion tests, in the laser-welded region, with and without porcelain. The union of the porcelain with the alloy is possible only after the oxidation of the metallic surface and the subsequent application of a bonding agent known as opaque. The porcelain applied to the base metal and weld bead showed different behaviours - after the flexion test, the base metal showed cracks, while that in the weld bead broke away completely. It was noted that the region subjected to laser welding had lower adherence to the porcelain than the base metal region, due to microstructural refinement of the weld bead. These results can be shown by the X-ray dispersive spectroscopy carried out on the regions studied. The flexion tests demonstrated that the Ni-Cr-Mo alloy subject to laser welding had significant alterations in its mechanical properties after application of the porcelain.