Compensation covenants for mining activities run with the land : a win for successive landowners

The Queensland Supreme Court case of Cape Flattery Silica Mines Pty Ltd v Hope Vale Aboriginal Shire Council [2012] QSC 381 provides guidance on the long-term ramifications of compensation agreements for mining activities. The central issue considered by the Court was whether compensation payments relate to land and run with the land pursuant to s 53(1) of the Property Law Act.

Shear strengths of lipped channel beams with stiffened web openings using numerical studies

This paper presents the details of numerical studies on the shear behaviour and strength of lipped channel beams (LCBs) with stiffened web openings. Over the last couple of decades, cold-formed steel beams have been used extensively in residential, industrial and commercial buildings as primary load bearing structural components. Their shear strengths are considerably reduced when web openings are included for the purpose of locating building services. Our research has shown that shear strengths of LCBs were reduced by up to 70% due to the inclusion of web openings. Hence there is a need to improve the shear strengths of LCBs with web openings. A cost effective way to improve the detrimental effects of a large web opening is to attach appropriate stiffeners around the web openings in order to restore the original shear strength and stiffness of LCBs. Hence numerical studies were undertaken to investigate the shear strengths of LCBs with stiffened web openings. In this research, finite element models of LCBs with stiffened web openings in shear were developed to simulate the shear behaviour and strength of LCBs. Various stiffening methods using plate and LCB stud stiffeners attached to LCBs using screw-fastening were attempted. The developed models were then validated by comparing their results with experimental results and used in parametric studies. Both finite element analysis and experimental results showed that the stiffening arrangements recommended by past re-search for cold-formed steel channel beams are not adequate to restore the shear strengths of LCBs with web openings. Therefore new stiffener arrangements were proposed for LCBs with web openings based on experimental and finite element analysis results. This paper presents the details of finite element models and analyses used in this research and the results including the recommended stiffener arrangements.

Numerical studies of load bearing LSF walls under realistic design fire conditions

Fire safety of light gauge steel frame (LSF) stud walls is important in the design of buildings. Currently LSF walls are increasingly used in the building industry, and are usually made of cold-formed and thin-walled steel studs that are fire-protected by two layers of plasterboard on both sides. Many experimental and numerical studies have been undertaken to investigate the fire performance of load bearing LSF walls under standard fire conditions. However, the standard time-temperature curve does not represent the fire load present in typical residential and commercial buildings that include considerable amount of thermoplastic materials. Real building fires are unlikely to follow a standard time-temperature curve. However, only limited research has been undertaken to investigate the fire performance of load bearing LSF walls under realistic design fire conditions. Therefore in this research, finite element thermal models of the traditional LSF wall panels without cavity insulation and the new LSF composite wall panels were developed to simulate their fire performance under recently developed realistic design fire curves. Suitable thermal properties were proposed for plasterboards and insulations based on laboratory tests and literature review. The developed models were then validated by comparing their thermal performance results with available results from realistic design fire tests, and were later used in parametric studies. This paper presents the details of the developed finite element thermal models of load bearing LSF wall panels under realistic design fire time-temperature curves and the re-sults. It shows that finite element thermal models can be used to predict the fire performance of load bearing LSF walls with varying configurations of insulations and plasterboards under realistic design fires. Failure times of load bearing LSF walls were also predicted based on the results from finite element thermal analyses.

Shear design of cold-formed steel beams using direct strength method

This paper presents the direct strength method (DSM) equations for cold-formed steel beams subject to shear. Light gauge cold-formed steel sections have been developed as more economical building solutions to the alternative heavier hot-rolled sections in the commercial and residential markets. Cold-formed lipped channel beams (LCB), LiteSteel beams (LSB) and hollow flange beams (HFB) are commonly used as flexural members such as floor joists and bearers. However, their shear capacities are determined based on conservative design rules. For the shear design of cold-formed web panels, their elastic shear buckling strength must be determined accurately including the potential post-buckling strength. Currently the elastic shear buckling coefficients of web panels are determined by assuming conservatively that the web panels are simply supported at the junction between the flange and web elements and ignore the post-buckling strength. Hence experimental and numerical studies were conducted to investigate the shear behaviour and strength of LSBs, LCBs and HFBs. New direct strength method (DSM) based design equations were proposed to determine the ultimate shear capacities of cold-formed steel beams. An improved equation for the higher elastic shear buckling coefficient of cold-formed steel beams was proposed based on finite element analysis results and included in the DSM design equations. A new post-buckling coefficient was also introduced in the DSM equation to include the available post-buckling strength of cold-formed steel beams.

Collaborating to develop research data management services and collections

The Queensland University of Technology (QUT) Library, like many other academic and research institution libraries in Australia, has been collaborating with a range of academic and service provider partners to develop a range of research data management services and collections. Three main strategies are being employed and an overview of process, infrastructure, usage and benefits is provided of each of these service aspects. The development of processes and infrastructure to facilitate the strategic identification and management of QUT developed datasets has been a major focus. A number of Australian National Data Service (ANDS) sponsored projects - including Seeding the Commons; Metadata Hub / Store; Data Capture and Gold Standard Record Exemplars have / will provide QUT with a data registry system, linkages to storage, processes for identifying and describing datasets, and a degree of academic awareness. QUT supports open access and has established a culture for making its research outputs available via the QUT ePrints institutional repository. Incorporating open access research datasets into the library collections is an equally important aspect of facilitating the adoption of data-centric eresearch methods. Some datasets are available commercially, and the library has collaborated with QUT researchers, in the QUT Business School especially strongly, to identify and procure a rapidly growing range of financial datasets to support research. The library undertakes licensing and uses the Library Resource Allocation to pay for the subscriptions. It is a new area of collection development for with much to be learned. The final strategy discussed is the library acting as “data broker”. QUT Library has been working with researchers to identify these datasets and undertake the licensing, payment and access as a centrally supported service on behalf of researchers.

Strategies for gaining and maintaining academic support for the institutional open access repository

The impact of research can be measured by use or citation count. The more widely available that research outputs are; the more likely they are to be used, and the higher the impact. Making the author-manuscript version of research outputs freely available via the institutional repository greatly increases the availability of research outputs and can increase the impact. QUT ePrints, the open access institutional repository of research outputs at Queensland University of Technology (QUT), Australia, was established in 2003 and is managed by the QUT Library. The repository now contains over 39,000 records. More than 21,000 of these records have full-text copies attached as result of continuous effort to maintain momentum and encourage academic engagement. The full-text deposit rate has continued to increase over time and, in 2012 (August, at the time of writing), 88% of the records for works published in 2012 provide access to a full-text copy. Achieving success has required a long term approach to collaboration, open access advocacy, repository promotion, support for the deposit process, and ongoing system development. This paper discusses the various approaches adopted by QUT Library, in collaboration with other areas of the University, to achieve success. Approaches include mainstreaming the repository via having it report to the University Research and Innovation Committee; regular provision of deposit rate data to faculties; championing key academic supporters; and holding promotional competitions and events such as during Open Access Week. Support and training is provided via regular deposit workshops with academics and faculty research support groups and via the provision of online self-help information. Recent system developments have included the integration of citation data (from Scopus and Web of Science) and the development of a statistical reporting system which incentivise engagement.

HCI for city farms : design challenges & opportunities

Urban agriculture plays an important role in many facets of food security, health and sustainability. The city farm is one such manifestation of urban agriculture: it functions as a location centric social hub that supplies food, education, and opportunities for strengthening the diverse sociocultural fabrics of the local community. This paper presents the case of Northey Street City Farm in Brisbane, Australia as an opportunity space for design. The paper iden-tifies four areas that present key challenges and opportunities for HCI design that support social sustainability of the city farm: A preference for face-to-face contact leads to inconsistencies in shared knowledge; a dependence on volun-teers and very limited resources necessitates easily accessible interventions; other local urban agricultural activity needing greater visibility; and the vulner-ability of the physical location to natural phenomenon, in this instance flooding, present a design challenge and a need to consider disaster management.

Development of a simplified design method to predict the fire rating of LSF walls

Recent fire research into the behaviour of light gauge steel frame (LSF) wall systems has devel-oped fire design rules based on Australian and European cold-formed steel design standards, AS/NZS 4600 and Eurocode 3 Part 1.3. However, these design rules are complex since the LSF wall studs are subjected to non-uniform elevated temperature distributions when the walls are exposed to fire from one side. Therefore this paper proposes an alternative design method for routine predictions of fire resistance rating of LSF walls. In this method, suitable equations are recommended first to predict the idealised stud time-temperature pro-files of eight different LSF wall configurations subject to standard fire conditions based on full scale fire test results. A new set of equations was then proposed to find the critical hot flange (failure) temperature for a giv-en load ratio for the same LSF wall configurations with varying steel grades and thickness. These equations were developed based on detailed finite element analyses that predicted the axial compression capacities and failure times of LSF wall studs subject to non-uniform temperature distributions with varying steel grades and thicknesses. This paper proposes a simple design method in which the two sets of equations developed for time-temperature profiles and critical hot flange temperatures are used to find the failure times of LSF walls. The proposed method was verified by comparing its predictions with the results from full scale fire tests and finite element analyses. This paper presents the details of this study including the finite element models of LSF wall studs, the results from relevant fire tests and finite element analyses, and the proposed equations.

Urban agriculture : a growing field of research workshop at INTERACT 2013

Growing food presents diverse challenges and opportunities within the urban environment. As cities develop, population density rises, land prices rise, and the opportunity to use land for traditional farming and gardening diminishes. Counter to this trend there are a growing number of both community gardens, city farms, guerrilla gardening, rooftop and vertical gardens, pot plants, windowsill herbs, and other balcony or backyard gardens cropping up in different cities, all with a purpose to produce food. This workshop brings to-gether practitioners and researchers in the field of urban agriculture and Hu-man-Computer Interaction to explore and opportunities for technology design to support the different forms of growing practice and foster local food production in cities. This 1-day workshop will serve as an active forum for researchers and practi-tioners across various fields including, but not limited to, agriculture and gar-dening, education, urban planning, human-computer interaction, and communi-ty engagement. This workshop has three distinct points of focus: i) Individual and small-scale gardening and food production, and how to connect like minded people who are involved in these practices to share their knowledge ii) Com-munities involved in urban agriculture, either through community gardens, city farms, or grassroots movements, often dependant on volunteer participation, providing the challenge of managing limited resources iii) Environmental and sociocultural sustainability through urban agriculture. The participants will have an opportunity to present their own work. This will be followed by a visit to a nearby city farm, which will provide a local context for a group design exercise. Finally the workshop will conclude with panel dis-cussions to review opportunities for further research and collaborations beyond the conference. For more information, please visit the workshop website, at http://www.urbaninformatics.net/resources/interact2013cfp/

Communication choices to engage participation of rural Indonesian craftspeople in development projects

In participatory design projects, maintaining effective communication between facilitator and participant is essential. This paper describes the consideration given to the choice of communication modes to engage participation of rural Indonesian craftspeople over the course of a significant 3 year project that aims to grow their self-determination, design and business skill. We demonstrate the variety and subtlety of oral and written forms of communication used by the facilitator during the project. The culture, the communication skill and the influence of tacit knowledge affect the effectiveness of some modes of communication over the others, as well as the available infrastructure. Considerations are specific to the case of rural Indonesian craftspeople, but general lessons can be drawn.

Growing friends by growing and sharing garden produce

Most urban agriculture literature focus on addressing access to healthy and affordable food and environmental issues via managing the urban farming chain which consists of production, processing, marketing, distribution and consumption. This paper focuses on a less acknowledged and documented aspect of individual urban farming: growing and sharing garden produce for recreation, well-being and friend making. This paper summarizes the experience of individual backyard farming and sharing as a way to interact with nature and people and explores ways to improve this experience, especially with the assistance of Information Communication Technology.

Designing a seasonality application to support urban agriculture practice

This position paper describes the work in progress towards the goal of building a technical prototype that enables users – those who have little or no knowledge and experience engaging in urban agriculture – to receive information personalised to their location and situation, and allow them to ask questions and share experiences with others. We describe the design process thus far, informed by a survey and a workshop with experts in the field, before concluding with the future direction of this work.

Brief screening for psychosis-like experiences

Objective Psychotic-like experiences (PLEs) are common, and are markers of poor mental health. This study examined the internal structure of a screening test, the Community Assessment of Psychic Experiences-Positive scale (CAPE-P) in a young Australian sample. Method A cross-sectional online survey, which included the CAPE-P, was completed by 1610 university students aged between 18 and 25 years. Confirmatory factor analyses compared 1-, 4-, and 5-factor models, and examined effects of omitting selected items. Results A 3-factor model, omitting items on magical thinking, grandiosity, paranormal beliefs and a cross-loading item produced the best fit. The resultant 15-item CAPE (CAPE-P15) had three subscales - Persecutory Ideation, Perceptual Abnormalities and Bizarre Experiences, all with high levels of internal consistency. Conclusion The CAPE-P15 shows promise as a measure of positive, psychosis-like experiences, but further validation of this measure is required in community samples.

Pushing cultural competence boundaries in nutrition and dietetics training

A health workforce ready for safe practice is a government priority, and particularly critical to support indigenous communities closing ‘the gap’. Increased pressure exists on dietetic training programs for quality placements, with fewer opportunities for immersion in Aboriginal and Torres Strait Islander communities to demonstrate cultural competence. In 2012, Queensland University of Technology established a partnership with Apunipima Cape York Health Council with 56 weeks of dietetic placement for 8 students provided to achieve these aims. Clinical practice in Community Public Health Nutrition (CPHN) was structured in a standard 6 week placement, with Individual Case Management (ICM) and Foodservice Management (FSM) integrated across 8 weeks (4 each), with an additional 2 weeks ICM prior in a metropolitan indigenous health service. Students transitioned from urban to rural then remote sites, with new web-based technologies used for support. Strong learning opportunities were provided, with CPHN projects in antenatal and child health, FSM on standardisation of procedures in a 22 bed health facility, and ICM exposing students to a variety of cases via hospital in/outpatients, general clinics and remote community outreach. Supervisor focus group evaluation was positive, with CPHN and FSM enhancing capacity of service. Student focus group evaluation revealed placements exceeded expectations, with rating high, and strong confidence in cultural competence described. Students debriefed final and third year cohorts on their experiences, with increased awareness and enthusiasm for work with indigenous communities indicated by groups. With the success of this partnership, placements are continuing 2013, and new boundaries in dietetic training established.

Sharpening our tools – translating research into practice

Providing culturally appropriate health communication tools at a community level, whilst meeting funding objectives set by Government led initiatives, can be challenging. Literature states that a translational research framework fostering community communication can encourage the development of appropriate communication tools to facilitate transfer of health information between community and researchers. Reflections from initial Need for Feed cooking and nutrition education program trials in remote Indigenous communities across Cape York indicated program resources were neither meeting community nor researchers needs. In response, a translational research framework was modelled with collaborative partnerships formed between researchers and community with the aim of modifying current resources. Local working groups were established to facilitate communication and guide continual remodelling and retrial of resources for successive programs. Feedback from working groups indicated community members wanted resources with more pictures and less words. Partnership with Chronic Disease Resources Online (CDRO) led to the development of pictorial resources including 3 evaluation tools, 27 recipe sets and 10 education support materials. Between June to December 2012 resources were trialled across 4 Cape York communities with 69 school aged children and 4 community elders. Qualitative data has indicated high satisfaction with modified pictorial resources, proving pictorial resources to be an effective and culturally appropriate method to both communicate health messages to community and facilitate flow of evaluation data to researchers. A translational research framework fostering communication between community and researchers can potentially enhance the quality of health communication tools.