The Strengths and Difficulties Questionnaire (SDQ-Fin) among Finnish children and adolescents

Objective: The psychometric properties of The Strengths and Difficulties Questionnaire (SDQ-Fin), a Finnish version of a brief screening instrument were studied. Emotional and behavioural problems of 7- to 15-year-olds measured by the SDQ were reported, as well as the occurrence of self-reported eating disturbance symptoms and alcohol use among adolescents. Methods and samples: The cross-sectional school survey included 25 items of the SDQ-Fin, items about eating disturbance, alchol use and child psychiatric help-seeking. The study consists of three community samples: 1. The SDQ-Fin parent (n = 703) and teacher (n = 376) versions of 7 – 12 –year-olds, and self-report versions (n = 528) of 11 – 16 years-olds were obtained, and 2. the parent (n = 81) and self-report versions of 15-16 –year olds (n = 129) were obtained in Laitila and Pyhäranta. 3. The self-report versions of 13 – 16 – year-olds (n = 1458) in Salo and Rovaniemi were obtained. Results: The psychometric properties of the SDQ-Fin were for the most part comparable with the other European SDQ research results. The internal consistency (Cronbach’s alpha = 0.71 in all informants’ reports) and inter-rater reliability (between the pairs of reports r = 0.38 - 0.44) were adequate. The concurrent validity (r = 0.75 between the SDQ and the CBCL total scores; r = 0.71 between the SDQ and the YSR total scores) was sufficient. Factor analysis of the SDQ self-report generally confirmed the postulated structure for girls and boys, except for the conduct problems scale of boys, which was fused with emotional symptoms and with hyperactivity. The response rates, means and cut-off points of the SDQ self-report scores were similar to those found, e.g. in Norway and in Britain. A high level of psychological problems, especially emotional and conduct problems and hyperactivity-inattention, were associated with high level of eating disturbance symptoms and alcohol use. Conclusion: The results showed that the psychometric properties of the SDQ-Fin are adequate and provide additional confirmation of the usefulness of the SDQ-Fin for, e.g. screening, epidemiological research and clinical purposes.

Flexible Multibody Simulation Approach in the Dynamic Analysis of Bone Strains Activity

The objective of this study is to show that bone strains due to dynamic mechanical loading during physical activity can be analysed using the flexible multibody simulation approach. Strains within the bone tissue play a major role in bone (re)modeling. Based on previous studies, it has been shown that dynamic loading seems to be more important for bone (re)modeling than static loading. The finite element method has been used previously to assess bone strains. However, the finite element method may be limited to static analysis of bone strains due to the expensive computation required for dynamic analysis, especially for a biomechanical system consisting of several bodies. Further, in vivo implementation of strain gauges on the surfaces of bone has been used previously in order to quantify the mechanical loading environment of the skeleton. However, in vivo strain measurement requires invasive methodology, which is challenging and limited to certain regions of superficial bones only, such as the anterior surface of the tibia. In this study, an alternative numerical approach to analyzing in vivo strains, based on the flexible multibody simulation approach, is proposed. In order to investigate the reliability of the proposed approach, three 3-dimensional musculoskeletal models where the right tibia is assumed to be flexible, are used as demonstration examples. The models are employed in a forward dynamics simulation in order to predict the tibial strains during walking on a level exercise. The flexible tibial model is developed using the actual geometry of the subject’s tibia, which is obtained from 3 dimensional reconstruction of Magnetic Resonance Images. Inverse dynamics simulation based on motion capture data obtained from walking at a constant velocity is used to calculate the desired contraction trajectory for each muscle. In the forward dynamics simulation, a proportional derivative servo controller is used to calculate each muscle force required to reproduce the motion, based on the desired muscle contraction trajectory obtained from the inverse dynamics simulation. Experimental measurements are used to verify the models and check the accuracy of the models in replicating the realistic mechanical loading environment measured from the walking test. The predicted strain results by the models show consistency with literature-based in vivo strain measurements. In conclusion, the non-invasive flexible multibody simulation approach may be used as a surrogate for experimental bone strain measurement, and thus be of use in detailed strain estimation of bones in different applications. Consequently, the information obtained from the present approach might be useful in clinical applications, including optimizing implant design and devising exercises to prevent bone fragility, accelerate fracture healing and reduce osteoporotic bone loss.

Comparing Etest and Broth Microdilution for Antifungal Susceptibility Testing of the Most-Relevant Pathogenic Molds.

Invasive mold infections are life-threatening diseases for which appropriate antifungal therapy is crucial. Their epidemiology is evolving, with the emergence of triazole-resistant Aspergillus spp. and multidrug-resistant non-Aspergillus molds. Despite the lack of interpretive criteria, antifungal susceptibility testing of molds may be useful in guiding antifungal therapy. The standard broth microdilution method (BMD) is demanding and requires expertise. We assessed the performance of a commercialized gradient diffusion method (Etest method) as an alternative to BMD. The MICs or minimal effective concentrations (MECs) of amphotericin B, voriconazole, posaconazole, caspofungin, and micafungin were assessed for 290 clinical isolates of the most representative pathogenic molds (154 Aspergillus and 136 non-Aspergillus isolates) with the BMD and Etest methods. Essential agreements (EAs) within ±2 dilutions of ≥90% between the two methods were considered acceptable. EAs for amphotericin B and voriconazole were >90% for most potentially susceptible species. For posaconazole, the correlation was acceptable for Mucoromycotina but Etest MIC values were consistently lower for Aspergillus spp. (EAs of <90%). Excellent EAs were found for echinocandins with highly susceptible (MECs of <0.015 μg/ml) or intrinsically resistant (MECs of >16 μg/ml) strains. However, MEC determinations lacked consistency between methods for strains exhibiting mid-range MECs for echinocandins. We concluded that the Etest method is an appropriate alternative to BMD for antifungal susceptibility testing of molds under specific circumstances, including testing with amphotericin B or triazoles for non-Aspergillus molds (Mucoromycotina and Fusarium spp.). Additional study of molecularly characterized triazole-resistant Aspergillus isolates is required to confirm the ability of the Etest method to detect voriconazole and posaconazole resistance among Aspergillus spp.

Diferències en l'estil de joc ofensiu entre un equip consolidat a la 1a divisió i un equip d'ascens recent

L’objectiu del següent treball és buscar les diferències en l’estil de joc ofensiu (en els gols aconseguits) entre un equip consolidat a la 1a divisió espanyola (F.C Barcelona) i un equip d’ascens recent (Elx C.F). Per aconseguir-ho, s’analitzen els gols a favor per part dels dos equips durant les primeres 25 jornades de lliga 2013/2014. A través d’un full d’observació i tangent en compte totes les seves categories, es classifiquen cada un dels gols segons l’estil de joc ofensiu al qual pertany (Joc Combinatiu, Joc Directe o Joc Contraatac). Els resultats obtinguts demostren com existeixen diferències significatives en la utilització dels diferents estils de joc entre els dos equips. A més també es mostren diferències rellevants pel que fa al nombre total de gols aconseguits, en la presència d’una regularitat temporal (durant les 25 jornades) d’utilització d’un estil o altre i en la relació temporal (durant el partit) dels gols aconseguits entre els dos equips analitzats.

Validation of a brief form of the Perceived Neighborhood Social Cohesion questionnaire.

The aim of this study was the validation of a brief form of the Perceived Neighborhood Social Cohesion questionnaire using data from 5065 men from the "Cohort Study on Substance-Use Risk Factors." A 9-item scale covering three factors was proposed. Excellent indices of internal consistency were measured (α = .93). The confirmatory factor analyses resulted in acceptable fit indices supporting measurement invariance across French and German forms. Significant correlations were found between the brief form of the Perceived Neighborhood Social Cohesion questionnaire, and satisfaction and self-reported health, providing evidence of the concurrent validity of the scale. Perceived neighborhood social cohesion, and depression and suicide attempts were negatively associated, sustaining the protective effect of perceived social cohesion.

Hardcopy quality parameters to ensure structures detection at digital mammography

Objective To develop procedures to ensure consistency of printing quality of digital images, by means of hardcopy quantitative analysis based on a standard image. Materials and Methods Characteristics of mammography DI-ML and general purpose DI-HL films were studied through the QC-Test utilizing different processing techniques in a FujiFilm®-DryPix4000 printer. A software was developed for sensitometric evaluation, generating a digital image including a gray scale and a bar pattern to evaluate contrast and spatial resolution. Results Mammography films showed maximum optical density of 4.11 and general purpose films, 3.22. The digital image was developed with a 33-step wedge scale and a high-contrast bar pattern (1 to 30 lp/cm) for spatial resolution evaluation. Conclusion Mammographic films presented higher values for maximum optical density and contrast resolution as compared with general purpose films. The utilized digital processing technique could only change the image pixels matrix values and did not affect the printing standard. The proposed digital image standard allows greater control of the relationship between pixels values and optical density obtained in the analysis of films quality and printing systems.

Clinical and videofluoroscopic diagnosis of dysphagia in chronic encephalopathy of childhood

Objective To evaluate the contribution of deglutition videofluoroscopy in the clinical diagnosis of dysphagia in chronic encephalopathy of childhood. Materials and Methods The study sample consisted of 93 children diagnosed with chronic encephalopathy, in the age range between two and five years, selected by convenience among patients referred to the authors' institution by speech therapists, neurologists and gastroenterologists in the period from March 2010 to September 2011. The data collection was made at two different moments, by different investigators who were blind to each other. Results The method presented low sensitivity for detecting aspiration with puree consistency (p = 0.04). Specificity and negative predictive value were high for clinical diagnosis of dysphagia with puree consistency. Conclusion In the present study, the value for sensitivity in the clinical diagnosis of dysphagia demonstrates that this diagnostic procedure may not detect any change in the swallowing process regardless of the food consistency used during the investigation. Thus, the addition of the videofluoroscopic method can significantly contribute to the diagnosis of dysphagia.

Adaptation and validation of the Spanish Version of the 'Survey Work-Home Interaction-NijmeGen' (SWING) to Spanish speaking countries

The purpose of this study is the adaptation and validation of the"Survey Work-Home Interaction NijmeGen" (SWING) developed by Geurts and colleagues to Spanish speaking countries (SWING-SSC). In order to analyze the questionnaire"s psychometric properties, confirmatory factor analysis (CFA) was carried out with a sample of 203 employees from various Spanish-speaking countries. Criterion related validity was tested by examining correlations between the SWING-SSC, and the theoretically relevant variables: health, role conflict, role clarity and supervisor support. Finally, reliability was tested analyzing the internal consistency of the scales. The analyses carried out indicate that SWING-SSC has good psychometric properties. In addition, the present results support the relation of the construct with health, role conflict, role clarity, and supervisor support. This study offers evidence for a sound work-life balance measure that contributes to the encouragement adequate conditions in the workplace, to reduce the conflict between the two spheres of professional and personal life, and to enhance positive relationships.

Rationing problems with payoff thresholds

An extension of the standard rationing model is introduced. Agents are not only identi fied by their respective claims over some amount of a scarce resource, but also by some payoff thresholds. These thresholds introduce exogenous differences among agents (full or partial priority, past allocations, past debts, ...) that may influence the final distribution. Within this framework we provide generalizations of the constrained equal awards rule and the constrained equal losses rule. We show that these generalized rules are dual from each other. We characterize the generalization of the equal awards rule by using the properties of consistency, path-independence and compensated exemption. Finally, we use the duality between rules to characterize the generalization of the equal losses solution.

Web services to link interlibrary software with OCLC WorldShare

Purpose - This article describes the use of web services to interconnect the GTBib interlibrary loan program with the OCLC WorldShare platform. Design/methodology/approach - We describe the current problem of duplication of procedures in libraries that have added their collections to the OCLC WorldCat catalogue in recent years and are therefore more likely to receive interlibrary loan requests through the WorldShare Platform. Findings - A solution that uses web services to insert and retrieve requests between the two systems is presented. Autonomous agents periodically check the status of the requests and keep them updated and synchronized. These agents also inform the library staff of any variation or inconsistency that is detected. Practical Implications - This technology reduces process management time by making it unnecessary to introduce the request data in both systems. Agents are used to check the consistency of statuses between the two systems, thus avoiding errors and omissions and improving the efficiency of the whole interlibrary loan process. Originality/value - This paper describes in detail the technical aspects of the solution as a reference for the development of future applications.

Otimização da reação de interesterificação química do óleo de palma

The Brazilian market has been showing a growing concern with nutritional values of oil components of foods. Chemical interesterification is a promising alternative to the current processes of modifying the consistency of oils. Chemical interesterification of deodorized palm oil was studied on a laboratory scale. The best results were obtained with 0.4% MeONa and heating for 20 min at 100 °C. These conditions are based on the largest variation in triacylglycerols as compared to a control. The trisaturated values varied from 6.2 to 9.9%, showing that the consistency of the oil improved for it to be used in margarines, without the formation of trans isomers.

SQualTrack: A Tool for Robust Fault Detection

One of the techniques used to detect faults in dynamic systems is analytical redundancy. An important difficulty in applying this technique to real systems is dealing with the uncertainties associated with the system itself and with the measurements. In this paper, this uncertainty is taken into account by the use of intervals for the parameters of the model and for the measurements. The method that is proposed in this paper checks the consistency between the system's behavior, obtained from the measurements, and the model's behavior; if they are inconsistent, then there is a fault. The problem of detecting faults is stated as a quantified real constraint satisfaction problem, which can be solved using the modal interval analysis (MIA). MIA is used because it provides powerful tools to extend the calculations over real functions to intervals. To improve the results of the detection of the faults, the simultaneous use of several sliding time windows is proposed. The result of implementing this method is semiqualitative tracking (SQualTrack), a fault-detection tool that is robust in the sense that it does not generate false alarms, i.e., if there are false alarms, they indicate either that the interval model does not represent the system adequately or that the interval measurements do not represent the true values of the variables adequately. SQualTrack is currently being used to detect faults in real processes. Some of these applications using real data have been developed within the European project advanced decision support system for chemical/petrochemical manufacturing processes and are also described in this paper

Setting priorities in clinical and health services research: Properties of an adapted and updated method

Objectives: The objectives of this study is to review the set of criteria of the Institute of Medicine (IOM) for priority-setting in research with addition of new criteria if necessary, and to develop and evaluate the reliability and validity of the final priority score. Methods: Based on the evaluation of 199 research topics, forty-five experts identified additional criteria for priority-setting, rated their relevance, and ranked and weighted them in a three-round modified Delphi technique. A final priority score was developed and evaluated. Internal consistency, test–retest and inter-rater reliability were assessed. Correlation with experts’ overall qualitative topic ratings were assessed as an approximation to validity. Results: All seven original IOM criteria were considered relevant and two new criteria were added (“potential for translation into practice”, and “need for knowledge”). Final ranks and relative weights differed from those of the original IOM criteria: “research impact on health outcomes” was considered the most important criterion (4.23), as opposed to “burden of disease” (3.92). Cronbach’s alpha (0.75) and test–retest stability (interclass correlation coefficient = 0.66) for the final set of criteria were acceptable. The area under the receiver operating characteristic curve for overall assessment of priority was 0.66. Conclusions: A reliable instrument for prioritizing topics in clinical and health services research has been developed. Further evaluation of its validity and impact on selecting research topics is required

A Practical Micro Mechanical Model Based Local Approach Methodology for the Analysis of Ductile Fracture of Welded T-Joints

This thesis concentrates on developing a practical local approach methodology based on micro mechanical models for the analysis of ductile fracture of welded joints. Two major problems involved in the local approach, namely the dilational constitutive relation reflecting the softening behaviour of material, and the failure criterion associated with the constitutive equation, have been studied in detail. Firstly, considerable efforts were made on the numerical integration and computer implementation for the non trivial dilational Gurson Tvergaard model. Considering the weaknesses of the widely used Euler forward integration algorithms, a family of generalized mid point algorithms is proposed for the Gurson Tvergaard model. Correspondingly, based on the decomposition of stresses into hydrostatic and deviatoric parts, an explicit seven parameter expression for the consistent tangent moduli of the algorithms is presented. This explicit formula avoids any matrix inversion during numerical iteration and thus greatly facilitates the computer implementation of the algorithms and increase the efficiency of the code. The accuracy of the proposed algorithms and other conventional algorithms has been assessed in a systematic manner in order to highlight the best algorithm for this study. The accurate and efficient performance of present finite element implementation of the proposed algorithms has been demonstrated by various numerical examples. It has been found that the true mid point algorithm (a = 0.5) is the most accurate one when the deviatoric strain increment is radial to the yield surface and it is very important to use the consistent tangent moduli in the Newton iteration procedure. Secondly, an assessment of the consistency of current local failure criteria for ductile fracture, the critical void growth criterion, the constant critical void volume fraction criterion and Thomason's plastic limit load failure criterion, has been made. Significant differences in the predictions of ductility by the three criteria were found. By assuming the void grows spherically and using the void volume fraction from the Gurson Tvergaard model to calculate the current void matrix geometry, Thomason's failure criterion has been modified and a new failure criterion for the Gurson Tvergaard model is presented. Comparison with Koplik and Needleman's finite element results shows that the new failure criterion is fairly accurate indeed. A novel feature of the new failure criterion is that a mechanism for void coalescence is incorporated into the constitutive model. Hence the material failure is a natural result of the development of macroscopic plastic flow and the microscopic internal necking mechanism. By the new failure criterion, the critical void volume fraction is not a material constant and the initial void volume fraction and/or void nucleation parameters essentially control the material failure. This feature is very desirable and makes the numerical calibration of void nucleation parameters(s) possible and physically sound. Thirdly, a local approach methodology based on the above two major contributions has been built up in ABAQUS via the user material subroutine UMAT and applied to welded T joints. By using the void nucleation parameters calibrated from simple smooth and notched specimens, it was found that the fracture behaviour of the welded T joints can be well predicted using present methodology. This application has shown how the damage parameters of both base material and heat affected zone (HAZ) material can be obtained in a step by step manner and how useful and capable the local approach methodology is in the analysis of fracture behaviour and crack development as well as structural integrity assessment of practical problems where non homogeneous materials are involved. Finally, a procedure for the possible engineering application of the present methodology is suggested and discussed.

Study and modeling of the desintegration kinetics of coated paper

The disintegration of recovered paper is the first operation in the preparation of recycled pulp. It is known that the defibering process follows a first order kinetics from which it is possible to obtain the disintegration kinetic constant (KD) by means of different ways. The disintegration constant can be obtained from the Somerville index results (%lsv and from the dissipated energy per volume unit (Ss). The %slv is related to the quantity of non-defibrated paper, as a measure of the non-disintegrated fiber residual (percentage of flakes), which is expressed in disintegration time units. In this work, disintegration kinetics from recycled coated paper has been evaluated, working at 20 revise rotor speed and for different fiber consistency (6, 8, 10, 12 and 14%). The results showed that the values of experimental disintegration kinetic constant, Ko, through the analysis of Somerville index, as function of time. Increased, the disintegration time was drastically reduced. The calculation of the disintegration kinetic constant (modelled Ko), extracted from the Rayleigh’s dissipation function, showed a good correlation with the experimental values using the evolution of the Somerville index or with the dissipated energy