燃料气中H_2、N_2、O_2、CH_4、CO、O_2的全分析

从生物质汽化制取的燃料气，其主要成份是 CO_2、H_2、O_2、N_2、CH_4、CO 六种气体。但在不同的工艺条件下，各组份的含量差异很大。在工艺试验中，需要及时监测各种组份含量的变化，摸索最佳工艺条件，这就要求缩短分析周期。为此我们改装了一台 SP-2307色谱仪。用 Ar 作载气，只用一个热导检测器，一次进样就可完成上述六种气体的分析。改装时增加气体自动进样系统，提高了分析的准确度。

高温气冷堆He载气中H_2和CO转化实验研究

研究了H＿2和CO在CuO－ZnO＿Al＿2O＿3催化床中转化成H＿2O和CO＿2的实验装置和实验结果，论证了不同床层工作温度、系统压力、杂质浓度、流量及露点温度等因素对氧化铜床工作性能的影响；测得了H＿2和CO在CuO－ZnO－Al＿2O＿3床上的转化特性曲线等变化规律，获得了转化容量、工作周期和转化效率等实验数据，确定了最佳运行参数。结果表明，使用CuO＿ZnO－Al＿2O＿3床可使净化后的H＿2和CO的体积分数都小于2×l0￣（－6），满足高温气冷堆的净化要求。为高温气冷堆中氧化铜床装置提供了可靠的设计数据。

The Deposition and Burning Characteristics During Slagging Co-Firing Coal and Wood: Modeling and Numerical Simulation

Numerical analysis was used to study the deposition and burning characteristics of combining co-combustion with slagging combustion technologies in this paper. The pyrolysis and burning kinetic models of different fuels were implanted into the WBSF-PCC2 (wall burning and slag flow in pulverized co-combustion) computation code, and then the slagging and co-combustion characteristicsespecially the wall burning mechanism of different solid fuels and their effects on the whole burning behavior in the cylindrical combustor at different mixing ratios under the condition of keeping the heat input samewere simulated numerically. The results showed that adding wood powder at 25% mass fraction can increase the temperature at the initial stage of combustion, which is helpful to utilize the front space of the combustor. Adding wood powder at a 25% mass fraction can increase the reaction rate at the initial combustion stage; also, the coal ignitability is improved, and the burnout efficiency is enhanced by about 5% of suspension and deposition particles, which is helpful for coal particles to burn entirely and for combustion devices to minimize their dimensions or sizes. The results also showed that adding wood powder at a proper ratio is helpful to keep the combustion stability, not only because of the enhancement for the burning characteristics, but also because the running slag layer structure can be changed more continuously, which is very important for avoiding the abnormal slag accumulation in the slagging combustor. The theoretic analysis in this paper proves that unification of co-combustion and slagging combustion technologies is feasible, though more comprehensive and rigorous research is needed.

Effect of Ru addition to CO/SiO2/HZSM-5 catalysts on Fischer-Tropsch synthesis of gasoline-range hydrocarbons

Microporous HZSM-5 zeolite and mesoporous SiO2 supported Ru-Co catalysts of various Ru adding amounts were prepared and evaluated for Fischer-Tropsch synthesis (FTS) of gasoline-range hydrocarbons (C-5-C-12). The tailor-made Ru-Co/SiO2/HZSM-5 catalysts possessed both micro- and mesopores, which accelerated hydrocracking/hydroisomerization of long-chain products and provided quick mass transfer channels respectively during FTS. In the same time. Ru increased Cor reduction degree by hydrogen spillover, thus CO conversion of 62.8% and gasoline-range hydrocarbon selectivity of 47%, including more than 14% isoparaffins, were achieved simultaneously when Ru content was optimized at 1 wt% in Ru-Co/SiO2/HZSM-5 catalyst.

Intense green upconversion emission in Tb3+/Yb3+ co-doped alumino-germano-silicate optical fibers

Tb/Yb共掺的石英光纤的上转换绿光发光研究，研究了最佳浓度配比和发光机理。