Variação genética em progênies de jacaranda cuspidifolia mart. Utilizando o delineamento sistemático tipo leque

Knowledge of genetic variation in native tree species has helped direct strategies of genetic ex situ conservation, based on provenances and progenies tests. These tests use fixed spacing, not allowing evaluating the behavior of different progenies under this management variable. One way to evaluate simultaneously the genetic variation and different spacing in a small planting area is to use a systematic design. The aim of this study was to estimate the genetic variation and to evaluate its performance in Jacaranda cuspidifolia under different spacing. We used a progeny test in a systematic fan design, arranged in a system of 30 concentric rays, with one progeny per ray, randomly, at angles of 12°. The plants were arranged in rays in geometric progression of ratio 1.21, corresponding to nine for plant spacing: 1,95 m2; 2,86 m2; 4,18 m2; 6,12 m2; 8,96 m2; 13,12 m2; 19,21 m2; 28,13 m2; e 41,19 m 2 installed in Selvíria/MS. The traits height, height diameter of 30 cm to soil (DA3) and survival were evaluated at 12 and 24 months of age. Estimates of genetic parameters and spacing were evaluated using the procedure REML/BLUP (restricted maximum likelihood / best linear unbiased prediction). The progenies showed genetic variation, showing that the sample strategy to ex situ conservation was efficient. The species showed good adaptability inthe field and the best performance in treating five, equivalent to a 3 × 3 m spacing, with 8,96 m2;/plant for all traits. The fan systematic design permitted to evaluate in a small area the silvicultural behavior of J. Cuspidifolia plants in spacing varying from 2 to 42 m2/plant (5.000 to 238 trees/ha); which could hardly be evaluat by the traditional designs.

Light microscope observations on the epididymis of paca (Agouti paca)

The features of paca epididymis, based on its appearance in light microscope, is described in this paper. The cellular population of the epithelial lining comprises principal cells, basal cells, apical cells, narrows cells, and hallo cells. The epididymis is divided in five distinct and continuous regions, Zone I, or initial segment, and zone II, are both localized into the head. Zone III comprises the distal head and all the body. Zones IV and V are restricted to the tail, in the proximal and distal cauda epididymis respectively. Each zone can be readily distinguished on the basis of morphological characteristics. The height of epididymal epithelium is greater in zone I. There is a progressive increase in the diameter of the tubular lumen through the different areas, with the maximum in the zone V. The presence of a high epithelium, and the virtual absence of sperm in zone I suggest fast transit of spermatozoa in this region. Zone V comprises the distal tail, has smaller epithelial lining, greater luminal diameter, shorter stereocilia than the other zones, and contains spermatozoa packed inside the lumen, that characterizes this zone as a place of sperm storage. The findings are compared with other reports in rodents and other domestic animals, to contribute to the understanding of epididymal morphophysiology. © 2013 Firenze University Press.

Floral induction of mango 'Tommy Atkins' at submedio São Francisco Region, Brazil

Irregular production is a major problem in mango. In an attempt to overcome irregular bearing, effects of two antigibberellins on flowering were evaluated, uniconazole (0.25 g of active ingredient per meter of canopy tree diameter) and paclobutrazol (1.0 g of active ingredient per meter of canopy tree diameter). Treatments were applied as a soil drench using 2 L of solution per tree, in a commercial orchard of 'Tommy Atkins' mango. Treatments were applied after the second vegetative flush commenced, subsequent to pruning. Branch growth was evaluated every 30 days after treatment application up to a maximum period of 90 days. The flowering percentage was recorded at 130 days. Ammonium nitrate (NH4NO3) as a foliar spray (concentration of 0.75%) was applied five times at seven day intervals from 95 to 100 days after treatment application as a dormancy breaking treatment. It was found that both paclobutrazol (PBZ) and uniconazole (UCZ) significantly inhibited the development of vegetative growth compared to the control. Both treatments resulted in identical rates of flowering shoots, 87%; based on results, it can be concluded that the application of antigibberellins (PBZ and UCZ) inhibit vegetative development in mango 'Tommy Atkins', and promote high levels of flowering. Additional tests are being carried out in other farms to confirm these findings, for different cultivars and seasons. © ISHS 2013.

Nursing regimens: Effects on body condition, return to postpartum ovarian cyclicity in Santa Ines ewes, and performance of lambs

The effects of nursing regimens on the body condition, onset of ovarian cyclicity postpartum and weaning weight of lambs were assessed in Santa Ines ewes. Thirty-two ewes were blocked according to parity, number of lambs, and body weight at lambing and within each block randomly allocated to treatments: continuous nursing (CN), controlled nursing (CN2) with two daily feedings for an hour after the 10th day postpartum, or early weaning (EW) with total separation from the lambs after the 10th day. The animals were evaluated from the 12th day postpartum until the first estrus or until 60th day. The dry matter and nutrients intake did not differ among treatments ( P>. 0.05) but did differ over time ( P<. 0.01). The weight, body condition score, serum concentrations of non-esterified fatty acids and prolactin, the percentages of ewes in estrus, of ewes that ovulated within 60th day and had ovulation silent, the period from lambing to estrus, ovulation and follicle with a diameter ≥5. mm and the maximum follicular diameter did not differ ( P>. 0.05) among the treatments. The percentage of ovulation until 30th day was greater ( P<. 0.05) in the EW group. The percentage of short luteal phases was higher in the CN2 and EW groups ( P=0.07) and normal luteal phases were higher in the CN group ( P=0.01). Lamb weight weaning was lower in the EW group ( P<. 0.05). It is possible to use CN to obtain lambing periods less than eight months in Santa Ines ewes, with the advantages of simpler management and higher lamb weaning weights. © 2013 Elsevier B.V.

Influence of the implant diameter with different sizes of hexagon: Analysis by 3-dimensional finite element method

The aim of this study was to evaluate the stress distribution in implants of regular platforms and of wide diameter with different sizes of hexagon by the 3-dimensional finite element method. We used simulated 3-dimensional models with the aid of Solidworks 2006 and Rhinoceros 4.0 software for the design of the implant and abutment and the InVesalius software for the design of the bone. Each model represented a block of bone from the mandibular molar region with an implant 10 mm in length and different diameters. Model A was an implant 3.75 mm/regular hexagon, model B was an implant 5.00 mm/regular hexagon, and model C was an implant 5.00 mm/ expanded hexagon. A load of 200 N was applied in the axial, lateral, and oblique directions. At implant, applying the load (axial, lateral, and oblique), the 3 models presented stress concentration at the threads in the cervical and middle regions, and the stress was higher for model A. At the abutment, models A and B showed a similar stress distribution, concentrated at the cervical and middle third; model C showed the highest stresses. On the cortical bone, the stress was concentrated at the cervical region for the 3 models and was higher for model A. In the trabecular bone, the stresses were less intense and concentrated around the implant body, and were more intense for model A. Among the models of wide diameter (models B and C), model B (implant 5.00 mm/regular hexagon) was more favorable with regard to distribution of stresses. Model A (implant 3.75 mm/regular hexagon) showed the largest areas and the most intense stress, and model B (implant 5.00 mm/regular hexagon) showed a more favorable stress distribution. The highest stresses were observed in the application of lateral load.

Influence of exercise order on upper body maximum and submaximal strength gains in trained men

The purpose of this study was to investigate the influence of exercise order on one-repetition maximum (1-RM) and ten-repetition maximum (10-RM) strength gains after 6 weeks of resistance training (RT) in trained men. Sixteen men were randomly assigned into two groups based on the order of exercises performed during training sessions: a group that performed large muscle group exercises first and progressed to small muscle group exercises (LG-SM); while a second group performed the opposite sequence and started with small muscle group exercises and progressed to large muscle group exercises (SM-LG). Four sessions of RT were conducted per week; all exercises were performed for three sets of 8-12 repetitions with 1-min rest intervals between sets. Maximal and submaximal strength were assessed at baseline and after 6 weeks of RT with 1-RM and 10-RM testing for the bench press (BP), lat pulldown (LPD), triceps pulley extension (TE) and biceps curl (BC), respectively. Two-way ANOVA for the 1-RM and 10-RM tests indicated a significant group x time interaction. The 1-RM values significantly increased for all exercises in both groups (P<0.05), but were not significantly different between groups. However, effect size (ES) data indicated that the LG-SM group exhibited a greater magnitude of gains (1-RM and 10-RM) for the BP and LPD exercises. Conversely, ES indicated that the SM-LG group exhibited a greater magnitude of gains (1-RM and 10-RM) for the TE and BC exercises. In conclusion, the results suggest that upper body movements should be prioritized and performed according to individual needs to maximize maximal and submaximal strength. © 2013 Scandinavian Society of Clinical Physiology and Nuclear Medicine.

Intraoral schwannomas: Presentation of a series of 12 cases

Introduction: Schwannomas are benign and not very frequent tumors of the peripheral nerves, derived from the nerve supporting Schwann cells. Study Design: Data were collected on the clinical manifestations (sex, age), location, size and symptonts of the lesions as well as the evolution time and the initial (presumption) diagnosis. Results: Twelve patients were documented, with a mean age of 29,5 ± 12,1 years (range 16-50) and a balanced gender distribution. The mean duration of the lesions was 42,17± 45,3 months. The lesion located in the floor of the mouth was the largest tumor, measuring about 4 cm in maximum diameter, while the average size of the 12 schwannomas was 2.04± 1.1 cm. Conclusion: We present 12 oral schwannomas diagnosed and treated over a period of 10 years. © Medicina Oral S. L. C.I.F. B 96689336 - eISSN: 1989-5488.

Stress analysis in bone tissue around single implants with different diameters and veneering materials: A 3-D finite element study

The aimof this study was to evaluate the stress distribution on bone tissue with a single prosthesis supported by implants of large and conventional diameter and presenting different veneering materials using the 3-D finite elementmethod. Sixteenmodels were fabricated to reproduce a bone block with implants, using two diameters (3.75 × 10 mmand 5.00 × 10 mm), four different veneering materials (composite resin, acrylic resin, porcelain, and NiCr crown), and two loads (axial (200 N) and oblique (100 N)). For data analysis, the maximum principal stress and vonMises criterion were used. For the axial load, the cortical bone in allmodels did not exhibit significant differences, and the trabecular bone presented higher tensile stresswith reduced implant diameter. For the oblique load, the cortical bone presented a significant increase in tensile stress on the same side as the loading for smaller implant diameters. The trabecular bone showed a similar but more discreet trend. There was no difference in bone tissue with different veneering materials. The veneering material did not influence the stress distribution in the supporting tissues of single implant-supported prostheses. The large-diameter implants improved the transference of occlusal loads to bone tissue and decreased stress mainly under oblique loads.Oblique loading was more detrimental to distribution stresses than axial loading. © 2013 Elsevier B.V. All rights reserved.

Espaçamento entre fileiras e população de plantas para cultivares de mamona de porte baixo na safra de verão e safrinha

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eficiência de uso de nitrogênio por seis cultivares de milho

Pós-graduação em Agronomia - FEIS

Combining hydro and thermal capacity results in maximum economic benefits

Includes bibliography

Florística e fitossociologia do estrato arbustivo de área de transição savana-floresta no Parque Estadual de Porto Ferreira, SP

Pós-graduação em Ciências Biológicas (Biologia Vegetal) - IBRC

Aplicação do ultrassom de baixa potência na prevenção de osteopenia em tíbias de ratos sob ausência de carga

Pós-graduação em Ciência Animal - FMVA

Estudo experimental do escoamento em torno de cilindros circulares em movimento de rotação

Pós-graduação em Engenharia Mecânica - FEIS

Histologia e morfometria do aparelho reprodutor de fêmeas submetidas à ovariosalpingo-histerectomia (Canis familiaris, Linnaeus, 1758)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)