Use of Stress Analysis Methods to Evaluate the Biomechanics of Oral Rehabilitation With Implants

Because the biomechanical behavior of dental implants is different from that of natural tooth, clinical problems may occur. The mechanism of stress distribution and load transfer to the implant/bone interface is a critical issue affecting the success rate of implants. Therefore, the aim of this study was to conduct a brief literature review of the available stress analysis methods to study implant-supported prosthesis loading and to discuss their contributions in the biomechanical evaluation of oral rehabilitation with implants. Several studies have used experimental, analytical, and computational models by means of finite element models (FEM), photoelasticity, strain gauges and associations of these methods to evaluate the biomechanical behavior of dental implants. The FEM has been used to evaluate new components, configurations, materials, and shapes of implants. The greatest advantage of the photoelastic method is the ability to visualize the stresses in complex structures, such as oral structures, and to observe the stress patterns in the whole model, allowing the researcher to localize and quantify the stress magnitude. Strain gauges can be used to assess in vivo and in vitro stress in prostheses, implants, and teeth. Some authors use the strain gauge technique with photoelasticity or FEM techniques. These methodologies can be widely applied in dentistry, mainly in the research field. Therefore, they can guide further research and clinical studies by predicting some disadvantages and streamlining clinical time.

Degenerative joint disease in cattle and buffaloes in the Amazon region: a retrospective study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Kinome profiling of osteoblasts on hydroxyapatite opens new avenues on biomaterial cell signaling

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of immediate loading on healing of implants installed with different insertion torques - an experimental study in dogs

Objective: To evaluate the influence of different insertion torques on healing of implants loaded immediately or left unloaded.Material and methods: In six Labrador dogs, all mandibular premolars and molars were extracted. After 4 months of healing, flaps were elevated, and two implant sites were prepared at each side of the mandible. The distal sites were prepared conventionally while the mesial sites were underprepared by 0.3 mm. As a consequence, different final insertion torques of about 30 Ncm at the distal and >70 Ncm at the mesial sites were recorded. Healing abutments were applied to the left and transmucosal abutments to the right side. Flaps were sutured, crown preparation of the upper right second and third premolars was performed, and impressions were taken. Within 24 h, crowns were cemented both to implants and teeth in the right side of the mouth. After 4 months, the animals were sacrificed and ground sections obtained for histological evaluation.Results: A higher buccal bony crestal resorption and a more apical position of the coronal level of osseointegration were found at the loaded compared with the unloaded sites. MBIC% and percentages of peri-implant mineralized tissue (MB%) were higher at the loaded compared with the unloaded sites. Moreover, a higher MBIC% was found at the lower compared with the higher final insertion torque.Conclusions: Immediate loading does not seem to have a negative effect on osseointegration. High torque values for the immediate loading procedures were not necessary. Probably, low torque values, were sufficient to obtain primary stability and hence may provide better osseointegration than high torque value.

Influence on alveolar resorption of the buccal bony plate width in the edentulous ridge expansion (ERE) - an experimental study in the dog

Objective: To compare the hard tissue changes at implants installed applying edentulous ridge expansion (E.R.E.) at sites with a buccal bony wall thickness of 1 or 2 mm.Material and methods: In six Labrador dogs, the first and second maxillary incisors were extracted, and the buccal alveolar bony plates and septa were removed. After 3 months of healing, partial-thickness flaps were dissected, and the E.R.E. was applied bilaterally. Hence, an expansion of the buccal bony crest was obtained in both sides of the maxilla with a displacement of either a 1- or a 2-mm-wide buccal bony plate at the test and control sites, respectively. After 3 months of healing, biopsies were obtained for histological analyses.Results: A buccal vertical resorption of the alveolar crest of 2.3 +/- 0.8 and 2.1 +/- 1.1 mm, and a coronal level of osseointegration at the buccal aspect of 2.7 +/- 0.5 and 2.9 +/- 0.9 mm were found at the test (1 mm) and control (2 mm) sites, respectively. The differences did not reach statistical significance. The mean values of the mineralized bone-to-implant contact (MBIC%) ranged from 62% to 73% at the buccal and lingual sites. No statistically significant differences were found. Horizontal volume gains of 1.8 and 1.1 mm were observed at the test and control sites, respectively, and the difference being statistically significant.Conclusions: Implants installed using the E.R.E. technique yielded a high degree of osseointegration. It is suggested that the displacement of buccal bony plates of 1 mm thickness is preferable compared with that of wider dimensions.

Canine osteomyelitis caused by Leishmania sp

Leishmaniasis is a disease emerging or re-emerging worldwide distribution (Sousa, 2008), a major impact on public health. The canine visceral leishmaniasis is an infectious parasitic zoonosis of worldwide distribution (Troncarelli, 2009), caused by a flagellate protozoan called Leishmania chagasi (Costard, 2009). Osteomyelitis can develop when the parasite reaches the bone tissue of the host via blood or continuity of adjacent soft tissue infection (Baltenperger, 2004). The histopathology of the lesions has 100% specificity when viewing the amastigote form of the parasite (Feitosa et al., 2000). A dog breed poodle, female, five years, with chronic lameness four months ago was attended by a veterinary, proceeded to the general clinical examination, radiographic evaluation of the hindquarters and the laboratory tests of enzyme immunoassay (ELISA) and indirect immunofluorescence (RIFI) for Leishmania sp. On examination, besides the enlargement of lymph nodes, the animal showed pain on flexion and extension of hind limbs. In radiographic lytic bone lesions were observed in bilateral ischial board and greater trochanter of the femur, suggestive of osteomyelitis. In specific laboratory tests for diagnosis of leishmaniasis ELISA reagent and RIFI reagent 1:40. As recommended by the Ministry of Health, the animal was euthanized. No macroscopic findings were reported during the necropsy, usually associated with leishmaniasis. The ischium bone fragments were sent for histopathological examination. There was intense proliferation of mononuclear inflammatory cells, mainly macrophages and lymphocytes. Amastigotes of Leishmania sp, were identified in the cytoplasm of some macrophages and bone tissue. In endemic areas for canine leishmaniasis, dogs with a history of intermittent lameness, and radiographic lytic bone lesions suggestive of osteomyelitis should be directed to realization of the histopathology and serologic tests for the differential diagnosis of Leishmania sp. Even without evidence of cutaneous or visceral lesions, usually associated with this disease.

Doença periodontal em cães

Periodontal disease affects the periodontum which are tissues that support and protect the tooth and are composed by the gingiva, alveolar bone, cementum and periodontal ligament. Lesions in the periodontum have as main etiologic agent the presence of plaque or biofilm, which is formed in 24 hours and, basically, it consists of microorganisms surrounded by some bacteria rich matrix products and salivary glycoproteins. Gingivitis is the first clinical manifestation of periodontal disease and it is reversible if the etiologic agent (plaque) is removed. However, if it is not treated or controlled, it will lead to an irreversible periodontitis, and even evolve into alveolar bone, tissue destruction and, eventually, tooth loss

Análise física da estrutura do tecido ósseo bovino

There are diseases in vertebrates associated with the structure of bone tissue that directly affect the locomotor system of the animal. Being a endoskeleton, the diagnosis of these diseases becomes difficult in vivo. The characterization of the physical structure of the bone tissue of healthy animals becomes a major tool in the diagnosis comparison of live animals. Thus, the objective of this work is to determine the average value of the key physical properties of the bone structure used in the clinical diagnosis, such as: bone density, porosity, and mass attenuation coefficient of 59.6 keV photons of bone tissue and bovine and equine check variations in these values. The samples were provided by the pathology department of the Faculty of Veterinary Medicine and Zootechny of Botucatu-SP, which are of one male equine and one female bovine animals, using the radio and metacarpus, together with these materials were supplied the historic them. They were withdrawn ten samples in cuts of 10cm over the bone . These samples were submitted to the wet method of immersion in water for the density, by the method of attenuation of gamma radiation of radioisotope 241Am, it is estimated the mass attenuation coefficient, and then were dried in the oven for determining the content moisture. In determining the porosity of the samples was tight ground, in order to obtain the density of particles. The results for the mass attenuation coefficient of gamma radiation to the levels of saturated humidity, environment humidity, dry humidity respectively 0289 ± 0039; 0286 ± 0040 and 0297 ± 0042. And the density of particles was 2.2691 g/cm3

Uso do beta fosfato tricálcio em levantamento da membrana de seio maxilar: estudo histológico, histomorfométrico e imunoistoquímico em coelhos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação histológica de estratégias de engenharia tecidual para a terapia endodôntica

Pós-graduação em Ciência Odontólogica - FOA

Expressão de genes relacionados à remodelação óssea na fase inicial da reabsorção do rebordo residual em mandíbulas humanas

Pós-graduação em Biopatologia Bucal - ICT

Construção de fantomas homogêneos pediátricos de crãnio e tórax para otimização de imagens em radiografia computadorizada

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Tratamento do sorriso gengival: como estabelecer proporção e harmonia

The etiology of gingival smile is multifactorial and the correct diagnosis eill determine a successful treatment planning. Altered passive eruption occurs during the final stages of tooth eruption, when apical migration of the periodontal tissues does not occur, resulting in a distance > 2mm between the alveolar crest and the cement-enamel juncrion. This change leads to the shortening of the clinical crown and even further may lead to excessive gingival exposure. For treatment, there is a necessity for the combined removal of gingiva and bone tissue. This article discusses the literature on the issue and reports a case where periodontal plastic surgery was performed for the correcrion of a gingival smile.

Reabilitação total da maxila com enxerto intraoral: relato de caso

The early tooth loss and periodontal disease often leave inadequate bone volume for installation of osseointegrated implants. The autogenous bone graft is considered the gold standard for reconstruction of residual bone defects. Some surgical techniques can be performed, including extra or intraoral donor sites depending on the degree of bone loss, depending on surgical-prosthetic planning and general condition of the patient. The intraoral bone grafts offer a safe option to rebuilt bone volume in smaller rehabilitations, with low morbidity and minimal postoperative discomfort. Among the possible donor sites, the mandibular ramus and body, which offer predominantly cortical bone, and the chin area, which offers corticomedullary bone tissue, can be harvested. The graft will be suitable both in quantity and quality, preserving the capacity of osteogenesis, osteoinduction and osteoconduction, which differentiate autogenous grafts from other biomaterials. The aim of this study was to report a clinical case in which the mandibular ramus graft was used for total reconstruction of an edentulous maxilla, showing that even large areas can be reconstructed with grafts from intraoral origin. All the steps that allowed the complete reconstruction of the maxilla done by an intraoral donor area are listed in the text, culminating in an extremely satisfactory clinical result.

Alveolar ridge and maxillary sinus augmentation using rhBMP-2: a systematic review

Purpose: The aim of this systematic review was to evaluate clinical and safety data for recombinant human bone morpho-genetic protein-2 (rhBMP-2) in an absorbable collagen sponge (ACS) carrier when used for alveolar ridge/maxillary sinusaugmentation in humans.Materials and Methods: Clinical studies/case ser ies published 1980 through June 2012 using rhBMP-2/ACS were searched.Studies meeting the following criteria were considered eligible for inclusion: >10 subjects at baseline and maxillary sinus oralveolar ridge augmentation not concomitant with implant placement.Results: Seven of 69 publications were eligible for review. rhBMP-2/ACS yielded clinically meaningful bone formationfor maxillary sinus augmentation that would allow placement of regular dental implants without consistent differencesbetween rhBMP-2 concentrations. Never theless, the statistical analysis showed that sinus augmentation following autog-enous bone graft was significantly greater (mean bone height: 1.6 mm, 95% CI: 0.5–2.7 mm) than for rhBMP-2/ACS(rhBMP-2 at 1.5 mg/mL). In extraction sockets, rhBMP-2/ACS maintained alveolar ridge height while enhancing alve olarridge width. Safety reports did not represent concerns for the proposed indications.Conclusions: rhBMP-2/ACS appears a promising alternative to autogenous bone grafts for alveolar ridge/maxillary sinusaugmentation; dose and carrier optimization may expand its efficacy, use, and clinical application.