Cosmic Topologies of Imitation: From the Horror of Digital Autotoxicus to the Auto-Toxicity of the Social

This article expands on an earlier concept of horror autotoxicus linked to digital contagions of spam and network Virality.1 It aims to present, as such, a broader conception of cosmic topologies of imitation (CTI) intended to better grasp the relatively new practices of social media marketing. Similar to digital autotoxicity, CTI provide the perfect medium for sharing while also spreading contagions that can potentially contaminate the medium itself. However, whereas digital contagions are perhaps limited to the toxicity of a technical layer of information viruses, the contagions of CTI are an all pervasive auto-toxicity which can infect human bodies and technologies increasingly in concert with each other. This is an exceptional autotoxicus that significantly blurs the immunological line of exemption between self and nonself, and potentially, the anthropomorphic distinction between individual self and collective others.

Rheology and Microfluidic flows of a cationic surfactant and hydrotropic salt mixture

Thesis (Ph.D.)--University of Washington, 2016-08

THE ROLE OF DYNAMIC CAPABILITIES IN THE INTERNATIONALIZATION OF MEDIUM SIZED FINNISH MANUFACTURING FIRMS - A case for Sormat Oy

A rapidly changing business environment has necessitated most small and medium sized enterprises with international ambitions to reconsider their sources of competitive advantage. To survive in the face of a changing business environment, firms should utilize their dynamic organizational capabilities as well as their internationalization capabilities. Firms develop a competitive advantage if they can exploit their unique organizational competences in a new or foreign market and also if they can acquire new capabilities as a result of engaging in foreign markets. The acquired capabilities from foreign locations enhance the existing capability portfolio of a firm with a desire to internationalize. The study combined the research streams of SME organizational dynamic capability and internationalization capability to build a complete picture on the existing knowledge. An intensive case study was used for empirically testing the theoretical framework of the study and compared with the literature on various organizational capability factors and internationalization capabilities. Sormay Oy was selected because it is a successful medium sized company operating in Finland in the manufacturing industry which has a high international profile. In addition, it has sufficient rate of growth in sales that warrants it to engage internationally in matters such as, acquisitions, joint ventures and partnerships. The key findings of the study suggests that, medium sized manufacturing firms have a set of core competences arising from their organizational capabilities which were identified to be employee know how and relationship with stakeholders which aid the firm in its quest for attaining competitive advantage, ensuring production flexibility and gaining benefits present in a network. In addition, internationalization capabilities were identified under both the RAT test and CAT test whereby the primary findings suggests that, firms that outperform their competitors produce products that meet specific customer and country requirements, foresee the pitfalls of imitation brought about by the foreign local companies and members of a particular network through joint ventures, acquisitions or partnerships as well as those firms that are capable to acquire new capabilities in the foreign markets and successfully use these acquired capabilities to enhance or renew their capability portfolio for their competitive advantage. Additional significant findings under internationalization capabilities were discovered whereby, Sormay Oy was able to develop a new market space for its products despite the difficult institutional environment present in Russia.

Automated Discovery of Social Networks in Online Learning Communities

As a way to gain greater insights into the operation of online communities, this dissertation applies automated text mining techniques to text-based communication to identify, describe and evaluate underlying social networks among online community members. The main thrust of the study is to automate the discovery of social ties that form between community members, using only the digital footprints left behind in their online forum postings. Currently, one of the most common but time consuming methods for discovering social ties between people is to ask questions about their perceived social ties. However, such a survey is difficult to collect due to the high investment in time associated with data collection and the sensitive nature of the types of questions that may be asked. To overcome these limitations, the dissertation presents a new, content-based method for automated discovery of social networks from threaded discussions, referred to as ‘name network’. As a case study, the proposed automated method is evaluated in the context of online learning communities. The results suggest that the proposed ‘name network’ method for collecting social network data is a viable alternative to costly and time-consuming collection of users’ data using surveys. The study also demonstrates how social networks produced by the ‘name network’ method can be used to study online classes and to look for evidence of collaborative learning in online learning communities. For example, educators can use name networks as a real time diagnostic tool to identify students who might need additional help or students who may provide such help to others. Future research will evaluate the usefulness of the ‘name network’ method in other types of online communities.

Defining the Resolution of a Network for Transportation Analyses: a New Method to Improve Transportation Planning Decisions

Travel demand models are important tools used in the analysis of transportation plans, projects, and policies. The modeling results are useful for transportation planners making transportation decisions and for policy makers developing transportation policies. Defining the level of detail (i.e., the number of roads) of the transport network in consistency with the travel demand model’s zone system is crucial to the accuracy of modeling results. However, travel demand modelers have not had tools to determine how much detail is needed in a transport network for a travel demand model. This dissertation seeks to fill this knowledge gap by (1) providing methodology to define an appropriate level of detail for a transport network in a given travel demand model; (2) implementing this methodology in a travel demand model in the Baltimore area; and (3) identifying how this methodology improves the modeling accuracy. All analyses identify the spatial resolution of the transport network has great impacts on the modeling results. For example, when compared to the observed traffic data, a very detailed network underestimates traffic congestion in the Baltimore area, while a network developed by this dissertation provides a more accurate modeling result of the traffic conditions. Through the evaluation of the impacts a new transportation project has on both networks, the differences in their analysis results point out the importance of having an appropriate level of network detail for making improved planning decisions. The results corroborate a suggested guideline concerning the development of a transport network in consistency with the travel demand model’s zone system. To conclude this dissertation, limitations are identified in data sources and methodology, based on which a plan of future studies is laid out.

Modeling the Network of Dutch and Flemish Print Production, 1550-1750

The production of artistic prints in the sixteenth- and seventeenth-century Netherlands was an inherently social process. Turning out prints at any reasonable scale depended on the fluid coordination between designers, platecutters, and publishers; roles that, by the sixteenth century, were considered distinguished enough to merit distinct credits engraved on the plates themselves: invenit, fecit/sculpsit, and excudit. While any one designer, plate cutter, and publisher could potentially exercise a great deal of influence over the production of a single print, their individual decisions (Whom to select as an engraver? What subjects to create for a print design? What market to sell to?) would have been variously constrained or encouraged by their position in this larger network (Who do they already know? And who, in turn, do their contacts know?) This dissertation addresses the impact of these constraints and affordances through the novel application of computational social network analysis to major databases of surviving prints from this period. This approach is used to evaluate several questions about trends in early modern print production practices that have not been satisfactorily addressed by traditional literature based on case studies alone: Did the social capital demanded by print production result in centralized, or distributed production of prints? When, and to what extent, did printmakers and publishers in the Low countries favor international versus domestic collaborators? And were printmakers under the same pressure as painters to specialize in particular artistic genres? This dissertation ultimately suggests how simple professional incentives endemic to the practice of printmaking may, at large scales, have resulted in quite complex patterns of collaboration and production. The framework of network analysis surfaces the role of certain printmakers who tend to be neglected in aesthetically-focused histories of art. This approach also highlights important issues concerning art historians’ balancing of individual influence versus the impact of longue durée trends. Finally, this dissertation also raises questions about the current limitations and future possibilities of combining computational methods with cultural heritage datasets in the pursuit of historical research.

Developmental Neural Correlates of Social Interaction

Children develop in a sea of reciprocal social interaction, but their brain development is predominately studied in non-interactive contexts (e.g., viewing photographs of faces). This dissertation investigated how the developing brain supports social interaction. Specifically, novel paradigms were used to target two facets of social experience—social communication and social motivation—across three studies in children and adults. In Study 1, adults listened to short vignettes—which contained no social information—that they believed to be either prerecorded or presented over an audio-feed by a live social partner. Simply believing that speech was from a live social partner increased activation in the brain’s mentalizing network—a network involved in thinking about others’ thoughts. Study 2 extended this paradigm to middle childhood, a time of increasing social competence and social network complexity, as well as structural and functional social brain development. Results showed that, as in adults, regions of the mentalizing network were engaged by live speech. Taken together, these findings indicate that the mentalizing network may support the processing of interactive communicative cues across development. Given this established importance of social-interactive context, Study 3 examined children’s social motivation when they believed they were engaged in a computer-based chat with a peer. Children initiated interaction via sharing information about their likes and hobbies and received responses from the peer. Compared to a non-social control, in which children chatted with a computer, peer interaction increased activation in mentalizing regions and reward circuitry. Further, within mentalizing regions, responsivity to the peer increased with age. Thus, across all three studies, social cognitive regions associated with mentalizing supported real-time social interaction. In contrast, the specific social context appeared to influence both reward circuitry involvement and age-related changes in neural activity. Future studies should continue to examine how the brain supports interaction across varied real-world social contexts. In addition to illuminating typical development, understanding the neural bases of interaction will offer insight into social disabilities such as autism, where social difficulties are often most acute in interactive situations. Ultimately, to best capture human experience, social neuroscience ought to be embedded in the social world.

Global slowing of network oscillations in mouse neocortex by diazepam

SCHEFFZUK, C. , KUKUSHKA, V. , VYSSOTSKI, A. L. , DRAGUHN, A. , TORT, A. B. L. , BRANKACK, J. . Global slowing of network oscillations in mouse neocortex by diazepam. Neuropharmacology , v. 65, p. 123-133, 2013.

Considering climate change in the development of marine protected areas

Marine ecosystems are facing a diverse range of threats, including climate change, prompting international efforts to safeguard marine biodiversity through the use of spatial management measures. Marine Protected Areas (MPAs) have been implemented as a conservation tool throughout the world, but their usefulness and effectiveness is strongly related to climate change. However, few MPA programmes have directly considered climate change in the design, management or monitoring of an MPA network. Under international obligations, EU, UK and national targets, Scotland has developed an MPA network that aims to protect marine biodiversity and contribute to the vision of a clean, healthy and productive marine environment. This is the first study to critically analyse the Scottish MPA process and highlight areas which may be improved upon in further iterations of the network in the context of climate change. Initially, a critical review of the Scottish MPA process considered how ecological principles for MPA network design were incorporated into the process, how stakeholder perceptions were considered and crucially what consideration was given to the influence of climate change on the eventual effectiveness of the network. The results indicated that to make a meaningful contribution to marine biodiversity protection for Europe the Scottish MPA network should: i) fully adopt best practice ecological principles ii) ensure effective protection and iii) explicitly consider climate change in the management, monitoring and future iterations of the network. However, this review also highlighted the difficulties of incorporating considerations of climate change into an already complex process. A series of international case studies from British Columbia, Canada; central California, USA; the Great Barrier Reef, Australia and the Hauraki Gulf, New Zealand, were then conducted to investigate perceptions of how climate change has been considered in the design, implementation, management and monitoring of MPAs. The key lessons from this study included: i) strictly protected marine reserves are considered essential for climate change resilience and will be necessary as scientific reference sites to understand climate change effects ii) adaptive management of MPA networks is important but hard to implement iii) strictly protected reserves managed as ecosystems are the best option for an uncertain future. This work provides new insights into the policy and practical challenges MPA managers face under climate change scenarios. Based on the Scottish and international studies, the need to facilitate clear communication between academics, policy makers and stakeholders was recognised in order to progress MPA policy delivery and to ensure decisions were jointly formed and acceptable. A Delphi technique was used to develop a series of recommendations for considering climate change in Scotland’s MPA process. The Delphi participant panel was selected for their knowledge of the Scottish MPA process and included stakeholders, policy makers and academics with expertise in MPA research. The results from the first round of the Delphi technique suggested that differing views of success would likely influence opinions regarding required management of MPAs, and in turn, the data requirements to support management action decisions. The second round of the Delphi technique explored this further and indicated that there was a fundamental dichotomy in panellists’ views of a successful MPA network depending upon whether they believed the MPAs should be strictly protected or allow for sustainable use. A third, focus group round of the Delphi Technique developed a feature-based management scenario matrix to aid in deciding upon management actions in light of changes occurring in the MPA network. This thesis highlights that if the Scottish MPA network is to fulfil objectives of conservation and restoration, the implications of climate change for the design, management and monitoring of the network must be considered. In particular, there needs to be a greater focus on: i) incorporating ecological principles that directly address climate change ii) effective protection that builds resilience of the marine and linked social environment iii) developing a focused, strong and adaptable monitoring framework iv) ensuring mechanisms for adaptive management.

Development of ultra-high-performance concrete (UHPC) using waste glass materials ─ towards innovative eco-friendly concrete

Le béton conventionnel (BC) a de nombreux problèmes tels que la corrosion de l’acier d'armature et les faibles résistances des constructions en béton. Par conséquent, la plupart des structures fabriquées avec du BC exigent une maintenance fréquent. Le béton fibré à ultra-hautes performances (BFUP) peut être conçu pour éliminer certaines des faiblesses caractéristiques du BC. Le BFUP est défini à travers le monde comme un béton ayant des propriétés mécaniques, de ductilité et de durabilité supérieures. Le BFUP classique comprend entre 800 kg/m³ et 1000 kg/m³ de ciment, de 25 à 35% massique (%m) de fumée de silice (FS), de 0 à 40%m de poudre de quartz (PQ) et 110-140%m de sable de quartz (SQ) (les pourcentages massiques sont basés sur la masse totale en ciment des mélanges). Le BFUP contient des fibres d'acier pour améliorer sa ductilité et sa résistance aux efforts de traction. Les quantités importantes de ciment utilisées pour produire un BFUP affectent non seulement les coûts de production et la consommation de ressources naturelles comme le calcaire, l'argile, le charbon et l'énergie électrique, mais affectent également négativement les dommages sur l'environnement en raison de la production substantielle de gaz à effet de serre dont le gas carbonique (CO[indice inférieur 2]). Par ailleurs, la distribution granulométrique du ciment présente des vides microscopiques qui peuvent être remplis avec des matières plus fines telles que la FS. Par contre, une grande quantité de FS est nécessaire pour combler ces vides uniquement avec de la FS (25 à 30%m du ciment) ce qui engendre des coûts élevés puisqu’il s’agit d’une ressource limitée. Aussi, la FS diminue de manière significative l’ouvrabilité des BFUP en raison de sa surface spécifique Blaine élevée. L’utilisation du PQ et du SQ est également coûteuse et consomme des ressources naturelles importantes. D’ailleurs, les PQ et SQ sont considérés comme des obstacles pour l’utilisation des BFUP à grande échelle dans le marché du béton, car ils ne parviennent pas à satisfaire les exigences environnementales. D’ailleurs, un rapport d'Environnement Canada stipule que le quartz provoque des dommages environnementaux immédiats et à long terme en raison de son effet biologique. Le BFUP est généralement vendu sur le marché comme un produit préemballé, ce qui limite les modifications de conception par l'utilisateur. Il est normalement transporté sur de longues distances, contrairement aux composantes des BC. Ceci contribue également à la génération de gaz à effet de serre et conduit à un coût plus élevé du produit final. Par conséquent, il existe le besoin de développer d’autres matériaux disponibles localement ayant des fonctions similaires pour remplacer partiellement ou totalement la fumée de silice, le sable de quartz ou la poudre de quartz, et donc de réduire la teneur en ciment dans BFUP, tout en ayant des propriétés comparables ou meilleures. De grandes quantités de déchets verre ne peuvent pas être recyclées en raison de leur fragilité, de leur couleur, ou des coûts élevés de recyclage. La plupart des déchets de verre vont dans les sites d'enfouissement, ce qui est indésirable puisqu’il s’agit d’un matériau non biodégradable et donc moins respectueux de l'environnement. Au cours des dernières années, des études ont été réalisées afin d’utiliser des déchets de verre comme ajout cimentaire alternatif (ACA) ou comme granulats ultrafins dans le béton, en fonction de la distribution granulométrique et de la composition chimique de ceux-ci. Cette thèse présente un nouveau type de béton écologique à base de déchets de verre à ultra-hautes performances (BEVUP) développé à l'Université de Sherbrooke. Les bétons ont été conçus à l’aide de déchets verre de particules de tailles variées et de l’optimisation granulaire de la des matrices granulaires et cimentaires. Les BEVUP peuvent être conçus avec une quantité réduite de ciment (400 à 800 kg/m³), de FS (50 à 220 kg/m³), de PQ (0 à 400 kg/m³), et de SQ (0-1200 kg/m³), tout en intégrant divers produits de déchets de verre: du sable de verre (SV) (0-1200 kg/m³) ayant un diamètre moyen (d[indice inférieur 50]) de 275 µm, une grande quantité de poudre de verre (PV) (200-700 kg/m³) ayant un d50 de 11 µm, une teneur modérée de poudre de verre fine (PVF) (50-200 kg/m³) avec d[indice inférieur] 50 de 3,8 µm. Le BEVUP contient également des fibres d'acier (pour augmenter la résistance à la traction et améliorer la ductilité), du superplastifiants (10-60 kg/m³) ainsi qu’un rapport eau-liant (E/L) aussi bas que celui de BFUP. Le remplacement du ciment et des particules de FS avec des particules de verre non-absorbantes et lisse améliore la rhéologie des BEVUP. De plus, l’utilisation de la PVF en remplacement de la FS réduit la surface spécifique totale nette d’un mélange de FS et de PVF. Puisque la surface spécifique nette des particules diminue, la quantité d’eau nécessaire pour lubrifier les surfaces des particules est moindre, ce qui permet d’obtenir un affaissement supérieur pour un même E/L. Aussi, l'utilisation de déchets de verre dans le béton abaisse la chaleur cumulative d'hydratation, ce qui contribue à minimiser le retrait de fissuration potentiel. En fonction de la composition des BEVUP et de la température de cure, ce type de béton peut atteindre des résistances à la compression allant de 130 à 230 MPa, des résistances à la flexion supérieures à 20 MPa, des résistances à la traction supérieure à 10 MPa et un module d'élasticité supérieur à 40 GPa. Les performances mécaniques de BEVUP sont améliorées grâce à la réactivité du verre amorphe, à l'optimisation granulométrique et la densification des mélanges. Les produits de déchets de verre dans les BEVUP ont un comportement pouzzolanique et réagissent avec la portlandite générée par l'hydratation du ciment. Cependant, ceci n’est pas le cas avec le sable de quartz ni la poudre de quartz dans le BFUP classique, qui réagissent à la température élevée de 400 °C. L'addition des déchets de verre améliore la densification de l'interface entre les particules. Les particules de déchets de verre ont une grande rigidité, ce qui augmente le module d'élasticité du béton. Le BEVUP a également une très bonne durabilité. Sa porosité capillaire est très faible, et le matériau est extrêmement résistant à la pénétration d’ions chlorure (≈ 8 coulombs). Sa résistance à l'abrasion (indice de pertes volumiques) est inférieure à 1,3. Le BEVUP ne subit pratiquement aucune détérioration aux cycles de gel-dégel, même après 1000 cycles. Après une évaluation des BEVUP en laboratoire, une mise à l'échelle a été réalisée avec un malaxeur de béton industriel et une validation en chantier avec de la construction de deux passerelles. Les propriétés mécaniques supérieures des BEVUP a permis de concevoir les passerelles avec des sections réduites d’environ de 60% par rapport aux sections faites de BC. Le BEVUP offre plusieurs avantages économiques et environnementaux. Il réduit le coût de production et l’empreinte carbone des structures construites de béton fibré à ultra-hautes performances (BFUP) classique, en utilisant des matériaux disponibles localement. Il réduit les émissions de CO[indice inférieur 2] associées à la production de clinkers de ciment (50% de remplacement du ciment) et utilise efficacement les ressources naturelles. De plus, la production de BEVUP permet de réduire les quantités de déchets de verre stockés ou mis en décharge qui causent des problèmes environnementaux et pourrait permettre de sauver des millions de dollars qui pourraient être dépensés dans le traitement de ces déchets. Enfin, il offre une solution alternative aux entreprises de construction dans la production de BFUP à moindre coût.

Guiding Monte Carlo tree searches with neural networks in the game of go

A dissertation submitted in fulfillment of the requirements to the degree of Master in Computer Science and Computer Engineering

A study of computational methods to analyze gene expression data

The recent advent of new technologies has led to huge amounts of genomic data. With these data come new opportunities to understand biological cellular processes underlying hidden regulation mechanisms and to identify disease related biomarkers for informative diagnostics. However, extracting biological insights from the immense amounts of genomic data is a challenging task. Therefore, effective and efficient computational techniques are needed to analyze and interpret genomic data. In this thesis, novel computational methods are proposed to address such challenges: a Bayesian mixture model, an extended Bayesian mixture model, and an Eigen-brain approach. The Bayesian mixture framework involves integration of the Bayesian network and the Gaussian mixture model. Based on the proposed framework and its conjunction with K-means clustering and principal component analysis (PCA), biological insights are derived such as context specific/dependent relationships and nested structures within microarray where biological replicates are encapsulated. The Bayesian mixture framework is then extended to explore posterior distributions of network space by incorporating a Markov chain Monte Carlo (MCMC) model. The extended Bayesian mixture model summarizes the sampled network structures by extracting biologically meaningful features. Finally, an Eigen-brain approach is proposed to analyze in situ hybridization data for the identification of the cell-type specific genes, which can be useful for informative blood diagnostics. Computational results with region-based clustering reveals the critical evidence for the consistency with brain anatomical structure.

Territorialisation and power in Portuguese America. The creation of comarcas (16th-18th centuries)

The general aim of this article is to analyse the political organisation of the territory in Portuguese America from the start of the building up of the Crown judiciary system from in the 16th to the 18th centuries and to look into the causes of its belatedness in comparison to what happened in Spanish America. The focus will however be on the comarcas through the reconstitution of the process leading to the setting up of these judiciary divisions. Four stages of this process will be identified and discussion will ensue over the social and political contexts in which these political and administrative novelties came to happen. It is claimed that the delay in the structuring of the judicial network in the States of Brazil and Maranhão stems from the fact that the Portuguese advance into the territories took place at a later stage. The comparisons between the two systems will also bring other differences to the fore, not least the greater rigidity of the Spanish model in contrast to the more experimental character of the Portuguese one, and the resilience found to exist in the donatarial system. It is also worth to point out that given solutions were the result of the will of central power as much as of local initiative, and it is suggested that the building up of the crown’s political apparatus (in which the judiciary network is included) brought about the connivance,albeit ephemeral, of social interests which are considered contradictory or irreconcilable by some authors.

Preparation of environmental monitoring plan pattern for surface water quality in Iran (Case study: Gharehsou River)

Using water quality management programs is a necessary and inevitable way for preservation and sustainable use of water resources. One of the important issues in determining the quality of water in rivers is designing effective quality control networks, so that the measured quality variables in these stations are, as far as possible, indicative of overall changes in water quality. One of the methods to achieve this goal is increasing the number of quality monitoring stations and sampling instances. Since this will dramatically increase the annual cost of monitoring, deciding on which stations and parameters are the most important ones, along with increasing the instances of sampling, in a way that shows maximum change in the system under study can affect the future decision-making processes for optimizing the efficacy of extant monitoring network, removing or adding new stations or parameters and decreasing or increasing sampling instances. This end, the efficiency of multivariate statistical procedures was studied in this thesis. Multivariate statistical procedure, with regard to its features, can be used as a practical and useful method in recognizing and analyzing rivers’ pollution and consequently in understanding, reasoning, controlling, and correct decision-making in water quality management. This research was carried out using multivariate statistical techniques for analyzing the quality of water and monitoring the variables affecting its quality in Gharasou river, in Ardabil province in northwest of Iran. During a year, 28 physical and chemical parameters were sampled in 11 stations. The results of these measurements were analyzed by multivariate procedures such as: Cluster Analysis (CA), Principal Component Analysis (PCA), Factor Analysis (FA), and Discriminant Analysis (DA). Based on the findings from cluster analysis, principal component analysis, and factor analysis the stations were divided into three groups of highly polluted (HP), moderately polluted (MP), and less polluted (LP) stations Thus, this study illustrates the usefulness of multivariate statistical techniques for analysis and interpretation of complex data sets, and in water quality assessment, identification of pollution sources/factors and understanding spatial variations in water quality for effective river water quality management. This study also shows the effectiveness of these techniques for getting better information about the water quality and design of monitoring network for effective management of water resources. Therefore, based on the results, Gharasou river water quality monitoring program was developed and presented.

CONCERNS REGARDING THE PROTECTION OF COPYRIGHT IN THE INTERNET

The advent of the World Network(Net) Internet and the use of the technology in the digital environment raised new challenges to the author's copyright. These worries were considered in the last international agreements, so that the warning is not true of those who postulate that the Internet is a " territory of nobody ", where the works are unprotected completely. To educate on the topic of the protection of the author's copyright and to provide with resources the instances(authorities) in charge of the observance of these rights looks like an ineluctable task.