Fatores que influenciam a neofobia alimentar em fêmeas e filhotes de sagüis (Callithrix jacchus)

Considering the constant environmental changes, the ability to introduce new food items in the diet is crucial to omnivore animal survival. For optimal nourishment and lessening of intoxication risks, the animals must detect signs that indicate which items are adequate for their intake. We investigate some factors that interfere in the responses to non familiar food, modulating their neophobic behavior, of marmosets Callithrix jacchus, an omnivore and generalist primate, native to Northeast Brazil, known for being cautious in ingesting not known food. We analyzed the influence of food taste (sweet or salty), pregnancy and sex in feeding behavior and neophobic responses in these animals. 10 captive females were first selected, 5 of them being then pregnant. The females, pregnant or not, ate more when presented to the sweet items than to the salty ones. Pregnant females, however, themselves were less neophobic to both tastes, being also strongly neophilic to the sweets. We verified then the influence of nourishment during pregnancy on young males and females post natal feeding behavior. We observed 10 young divided in two groups, one whose mother ate that food item during pregnancy and one whose mother had no contact to it. In the first group that food was more easily accepted by the young, suggesting that neofobia and feeding behavior had a pre natal influence. Female young also ingested more food and were less neophobic than males, a difference already observed in behavior of adults of these specie. These results suggest that the low neophobic behavior to sweet food showed by females can be adaptive, and might have bestowed more fitness to those who presented it

Alumina porous ceramics: mathematical behavior at different commercial starch concentration

Several researches have been developed in order to verify the porosity effect over the ceramic material properties. The starch consolidation casting (SCC) allows to obtain porous ceramics by using starch as a binder and pore forming element. This work is intended to describe the porous mathematical behavior and the mechanical resistance at different commercial starch concentration. Ceramic samples were made with alumina and potato and corn starches. The slips were prepared with 10 to 50 wt% of starch. The specimens were characterized by apparent density measurements and three-point flexural test associated to Weibull statistics. Results indicated that the porosity showed a first-order exponential equation e(-x/c) increasing in both kinds of starches, so it was confirmed that the alumina ceramic porosity is related to the kind of starch used. The mechanical resistance is represented by a logarithmic expression R = A + B/1+10((Log(x0)-P)C).

Preparation of Ni-Ti-Mo and Ni-Ti-Mo-Zr Alloys by High-Energy Ball Milling and Subsequent Hot Pressing

This work discusses on the preparation of Ni-45Ti-5Mo, Ni-40Ti-10Mo and Ni-46Ti-2Mo-2Zr (at-%) alloys by high-energy ball milling and hot pressing, which are potentially attractive for dental and medical applications. The milling process was performed in stainless steel balls (19mm diameter) and vials (225 mL) using a rotary speed of 300rpm and a ball-to-powder weight ratio of 10:1. Hot pressing under vacuum was performed in a BN-coated graphite crucible at 900 degrees C for 1 h using a load of 20 MPa. The milled and hot-pressed materials were characterized by X-ray diffraction, electron scanning microscopy, and electron dispersive spectrometry. Peaks of B2-NiTi and Ni4Ti3 were identified in XRD patterns of Ni-45Ti-5Mo, Ni-40Ti-10Mo and Ni-46Ti-2Mo-2Zr powders milled for 1h. The NiTi compound dissolved small Mo amounts lower than 4 at%, which were measured by EDS analysis. Moreover, it was identified the existence of an unknown Mo-rich phase in microstructures of the hot-pressed Ni-Ti-Mo alloys.

On the Phase Transformation in Mechanically Alloyed Ni-Nb and Ni-Ta and Ni-Nb-Ta Powders

This paper reports on the phase transformation during the preparation of Ni-25Nb, Ni-25Ta, Ni-20Nb-5Ta and Ni-15Nb-10Ta (at-%) powders by high-energy ball milling from elemental powders. The milling process was performed in a planetary ball milling using stainless steel balls and vials, rotary speed of 300rpm, and a ball-to-powder of 10:1. To minimize contamination and spontaneous ignition the powders were handled under argon atmosphere in a glove box. The milled powders were characterized by means of X-ray diffraction techniques. Results indicated that the Ni atoms were preferentially dissolved into the Nb (and/or Ta) lattice at the initial milling times, which contributed to change the relative intensity on the diffraction peaks. After the dissolution of Nb (and/or Ta) into the Ni lattice, the Ni peaks were moved to the direction of lower diffraction angles in Ni-25Nb, Ni-25Ta, Ni-20Nb-5Ta, Ni-15Nb-10Ta powders, indicating that the mechanical alloying was achieved.

Structural Evaluation of Mechanically Alloyed and Heat-Treated Ti-25at-%Si Powders

This work discusses on the structural evaluation of mechanically alloyed and heat-treated Ti-25at%Si powders. The milling process was conducted in a planetary ball mill using stainless steel balls/vials, 200 rpm and ball-to-powder weight ratio of 5:1, whereas the heat treatment was conducted under Ar atmosphere at 1100 C for 4 h. Samples were characterized by X-ray diffraction, differential scanning calorimetry, scanning electron microscopy and energy dispersive spectrometry. The Si peaks disappeared after milling for 30h, indicating that the Si atoms were dissolved into the Ti lattice in order to form an extended solid solution. The Ti peaks were broadened and their intensities reduced for longer milling times whereas a halo was formed in Ti-25Si powders milled for 200h suggesting that an amorphous structure was achieved. The crystallite size was decreased with increasing milling times. A large Ti3Si amount was found in mechanically alloyed Ti-25at%Si powders after heating at 1100 degrees C for 4h.

Preparation of Al2TiO5-Al2O3 and Al2TiO5-Al2O3-TiO2 Ceramics by High-Energy Ball Milling and Sintering

The present work reports on the preparation of Al2O3-TiO2 ceramics by high-energy ball milling and sintering, varying the molar fraction in 1:1 and 3:1. The powder mixtures were processed in a planetary Fritsch P-5 ball mill using silicon nitride balls (10 mm diameter) and vials (225 mL), rotary speed of 250 rpm and a ball-to-powder weight ratio of 5:1. Samples were collected into the vial after different milling times. The milled powders were uniaxially compacted and sintered at 1300 and 1500 degrees C for 4h. The milled and sintered materials were characterized by X-ray diffraction and electron scanning microscopy (SEM). Results indicated that the intensity of Al2O3 and TiO2 peaks were reduced for longer milling times, suggesting that nanosized particles can be achieved. The densification of Al2O3-TiO2 ceramics was higher than 98% over the relative density in samples sintered at 1500 degrees C for 4h, which presented the formation of Al2TiO5.

Structural Evaluation of Mechanically Alloyed (67-x)Ti-xZr-22Si-11B Powders

The present work reports on the structural evaluation of mechanically alloyed Ti-xZr-22Si-11B (x = 5, 7, 10, 15 and 20 at-%) powders. Milled powders and hot-pressed alloys were characterized by X-ray diffraction, electron scanning microscopy, and electron dispersive spectrometry. The Si and B atoms were preferentially dissolved into the Ti and Zr lattices during ball milling of Ti-xZr-22Si-11B (x = 7, 10, 15 and 20 at-%) powders, and extended solid solutions were achieved. The displacement of Ti peaks was more pronounced to the direction of lower diffraction angles with increasing Zr amounts in mechanically alloyed Ti-Zr-Si-B powders, indicating that the Zr atoms were also dissolved into the Ti lattice.

Caracterização de poliacrilamida parcialmente hidrolisada em regime concentrado

A partially hydrolyzed polyacrylamide (HPAM) is a copolymer composed of acrylamide and sodium acrylate. Due to its wide range of applications there are different methods for its quantification and characterization in solution systems. Evaluation of C* is important to describe the transition from dilute to semi-dilute, behavior, when the solution will have its characteristic viscosity at concentrations above C*. This dissertation describes the determination of the critical concentration of overlap C* by potentiometry of partially hydrolyzed polyacrylamide - HPAM under acidic conditions. Based on the law of mass action and the proper treatment of the constant of aggregate formation, polymer molecular weight, degree of polymerization and hydrolysis were calculated. The inflection point was determined by the intersection of the resulting equation and mathematical development, statistically satisfy the experimental points relating the number of moles of monomers (n), equilibrium constant of formation of the entanglements (K*), pH, C* and acidity constant of the polymer (Ka). The viscometric parameters of C* showed a percentage difference compared to potentiometers. The results for the determination of C*, and degree of copolymerization molar mass proved to be a simple alternative for the characterization of polymers with protonated monomers and water soluble

TNF-308G > A Single Nucleotide Polymorphism Is Associated With Leprosy Among Brazilians: A Genetic Epidemiology Assessment, Meta-Analysis, and Functional Study

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Experimental pancreas transplantation: the consequences of the portocaval shunt on the blood glucose, plasma insulin, and glucagon

A proposição foi realizada, no período pós-operatório imediato, em 40 ratos Wistar, distribuídos por sorteio em doi grupos: grupo NC, vinte ratos correspondentes ao grupo controle, não diabético, submetidos a operação simulada e o grupo PT, 20 ratos correspondentes ao grupo diabético que recebeu transplante de pâncreas heterotópico de ratos Wistar normais. Durante sete dias, antes do transplante, e 1, 3, 6, 12, 24, 48, 72, 96 horas após, determinava-se a glicose sanguínea, a insulina plasnática e o glucagon. Estes parâmetros eram obtidos também do grupo NC. Diabetes mellitus experimental era induzida pela administração intravenosa de aloxana. O grupo PT era imunosuprimido com ciclosporina A. O grupo NC apresentou níveis normais de glicose sanguínea, de insulina plásmica e de glucagon, durante todo o experimento. Foi encontrada nítida hiperinsulinemia no sangue venoso periférico do grupo PT. A insulina plasmática era significantemente maior no grupo PT comparada ao grupo NC começando 72 horas após o transplante. O glucagon plasmático, elevado no período pré-transplante, não se alterou após o transplante. Apesar de hiperinsulinemia e hiperglucagonemia, os níveis de glicose sanguínea eram elevados 6 horas após o transplante e mantiveram-se normais após este período. Considerando-se os níveis de glicose sanguínea 12 horas pós-transplante, não houve diferença estatisticamente significante entre os grupos PT e NC, até o sacrifício.

Histological and immunohistochemical study of the expression of p53 and ki-67 proteins in the mucosa of the tongue, pharynx and larynx of rats exposed to cigarette smoke

Introduction: Head and neck cancers are linked to smoking. The most affected sites are the oral cavity, pharynx and larynx. Experimental studies show epithelial lesions caused by cigarette smoke. Objectives: To investigate in rats the effects of acute cigarette smoke exposure on the mucosa of the tongue, pharynx and larynx.Material and method: Wistar rats were allocated into two groups of 20 animals: CG (control) receiving food and water ad libitum and TG (Tobacco) exposed to the smoke of 40 cigarettes/day for 60 days. Biopsy of their tongues, pharynxes and larynxes were subjected to histopathological, histomorphometric and immunohistochemical studies of protein p53 and ki-67.Result: The histological analysis of tongue from the Tobacco group revealed epithelial hyperplasia (90%), basal cell hyperplasia (95%) and mild to moderate dysplasia (85%). In pharynx showed basal cell hyperplasia (85%), dysplasia (25%) and vascular congestion (95%). In larynx showed basal cell hyperplasia (70%), epithelial hyperplasia (55%), congestion (100%) and inflammatory infiltrate (25%). Morphometric analysis revealed that keratin layer thickness was greater in the tobacco group. P53 immunoexpression was negative in both groups. Ki-67 immunoexpression was positive in basal cell nuclei but in parabasal cell nuclei it was positive only in the Tobacco group.Conclusions: The exposure of animals to cigarette smoke for 60 days resulted in benign lesions. The duration of exposure was not enough to cause the development cancer, as confirmed by the negative expression of p53 protein in all slides examined. Analysis of ki-67 expression showed intense epithelial proliferation in response to damage.

Progression of nephropathy after islet of langerhans transplantation in alloxan-induced diabetic rats

We studied the effects of islet of Langerhans transplantation (IT) on the kidney lesions of rats with alloxan-induced diabetes. Forty-five inbred male Lewis rats were randomly assigned to 3 experimental groups: group Gl included 15 non-diabetic control rats (NC), group GIT included 15 alloxan-induced diabetic rats (DC), and group III included 15 alloxan-induced diabetic rats that received pancreatic islet transplantation prepared by nonenzymatic method from normal donor Lewis rats and injected into the portal vein (IT). Each group was further divided into 3 subgroups of 5 rats which were sacrificed at 1, 3, and 6 months of follow-up, respectively. Clinical and laboratorial parameters were recorded in the mentioned periods in the 3 experimental groups. For histology, the kidneys of all rats of each subgroup were studied and 50 glomeruli and 50 tubules of each kidney were analyzed using light microscopy by two different investigators in a double blind study. The results showed progressive glomerular basement membrane thickening (GBMT), mesangial enlargement (ME), and Bowman's capsule thickening (BCT) in the 3 experimental groups throughout the follow-up. These alterations were significantly more severe in DC rats at 6 months when compared to NC rats (p < 0.01). However, the degree of GBMT, ME, and BCT observed in DC rats was not statistically different from IT rats at 1, 3, and 6 months. In addition, Armanni-Ebstein lesions of the tubules (AE) and tubular lumen protein (PRO) observed in DC rats were also observed in IT rats all over the study. These lesions were never present in NC rats. We conclude that IT did not prevent progression of kidney lesions in alloxan-induced diabetic rats within 6 months after transplantation.

Ocular melanoma and mammary mucinous carcinoma in an African lion

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Allium species poisoning in dogs and cats

Dogs and cats are the animals that owners most frequently seek assistance for potential poisonings, and these species are frequently involved with toxicoses due to ingestion of poisonous food. Feeding human foodstuff to pets may prove itself dangerous for their health, similarly to what is observed in Allium species toxicosis. Allium species toxicosis is reported worldwide in several animal species, and the toxic principles present in them causes the transformation of hemoglobin into methemoglobin, consequently resulting in hemolytic anemia with Heinz body formation. The aim of this review is to analyze the clinicopathologic aspects and therapeutic approach of this serious toxicosis of dogs and cats in order to give knowledge to veterinarians about Allium species toxicosis, and subsequently allow them to correctly diagnose this disease when facing it; and to educate pet owners to not feed their animals with Alliumcontaing food in order to better control this particular life-threatening toxicosis.