Relationship Between Speed and Time in Running

The purpose of this study was to evaluate the effect of using different mathematical models to describe the relationship between treadmill running speed and time to exhaustion. All models generated a value for an aerobic parameter (critical speed; S(critical)). 35 university students performed 5-7 constant-speed 0%-slope treadmill tests at speeds that elicited exhaustion in similar to 3 min to similar to 10 min. Speed and time data were fitted using 3 models: (1) a 2-parameter hyperbolic model; (2) a 3-parameter hyperbolic model; and (3) a hybrid 3-parameter hyperbolic + exponential model. The 2-parameter model generated values for S(critical) (mean (+/- SD): 186 +/- 33 m.min(-1)) and anaerobic distance capacity (ADC; 251 +/- 122 m) with a high level of statistical certainty (i.e., with small SEEs). The 3-parameter models generated parameter estimates that were unrealistic in magnitude and/or associated with large SEEs and little statistical certainty. Therefore, it was concluded that, for the range of exercise durations used in the present study, the 2-parameter model is preferred because it provides a parsimonious description of the relationship between velocity and time to fatigue, and it produces parameters of known physiological significance, with excellent confidence.

Vermiculita como substrato para o teste de germinação de sementes de barbatimão

The objective of this research was to evaluate the use of vermiculite as a substrate for the germination test of 'barbatimao' seeds and to establish what would be the best granulometry and the best moisture intensity to germinate 'barbatimao' seeds. Four replications of 50 seeds were previously scarified with H(2)SO(4) for 60 minutes. Afterwards, the following germination substrates were evaluated: paper rolls moistened with water equivalent to 2.5 times the weight of the dry paper (control); micron, super thin, thin and average sized vermiculite moistened with 0.5, 1.0, 1.5 and 2.0 times the weight of the dry paper. The germination temperature was 30 C. The percentage of normal seedlings was obtained seven days after sowing (first count) and, then, weekly (up to 28 days). Average time and relative distribution of germination were calculated. It was concluded that the germination of 'barbatimao' seeds can be carried out with either fine vermiculite moistened with water equivalent to 2.0 times the weight of the dry paper or average sized substrate moistened with water equivalent to 0.5 to 2.0 times the weight of dry paper. These treatments resulted in higher and faster germination (21 days), similarly to the paper roll method.

Efeito alelopático de extrato aquoso de folhas de Azadirachta indica A. Juss. em alface, soja, milho, feijão e picão-preto

The family Meliaceae has been identified as one of the most promising for biological control, as most species have biologically active compounds. Among the species, the Neem (Azadirachta indica A. Juss) is that stands out most for its efficiency and low toxicity, and it is utilized to control insects, fungi and nematodes. The aim of this work was to verify the allelopathic potential of aqueous extract of fresh leaves of Neem on germination of lettuce, soybeans, maize, beans and Bidens pilosa, as a way to control this weed. The extract was obtained by grinding 200g/L of fresh leaves of the Neem (considered extract 100%) and diluting in distilled water at concentrations of 80, 60, 40, and 20%, and a control with only water. The seeds were kept in the germination chamber at a temperature of 25 degrees C, with photoperiod of 12 hours of light. The aqueous extract affected the germination percentage and average length root of lettuce, with values of 1% and 0.1, cm respectively. For the soybeans, the extract influenced negatively the average time of germination and average speed of germination. There was a drastic reduction of the average root length at higher concentration for soybean, corn and beans. For Bidens pilosa all the parameters analyzed were negatively affected, which means sensitivity to the extract. The bioassay performed in the laboratory showed that the aqueous extract of fresh leaves of Azadirachta indica has allelopathic effect on all species.

Tipos de resistência a Alabama Argillacea (Huebner, 1818) (Lepidoptera: Noctuidae) envolvidos em genótipos de algodoeiro: II. Antibiose

Cotton genotypes resistance to Alabama argillacea (Huebner, 1818) due to antibiosis has been evaluated in laboratory trials (at 27 ± 2°C, 70 ± 10% relative humidity and 14 hours photoperiod). Six different genetic materials (T 1122-13-1, STO 285 N, JPM 157, T 953-13-4-2, CNPA 9211-21, and CNPA 9211-31) have been tested in a completely randomized experimental design, with ten replications, each one with ten larvae/genotype. Larvae have been supplied with leaves daily. The following variables have been scored: time length of several insect stages (from larvae to adult), average mass of larvae and pupae as well as average larval, pre-pupal and pupal mortality rates. All genotypes have revealed longer overall average time length of stage duration from larvae to adult, as compared to STO 285 N; however, CNPA 9211-31 and CNPA 9211-21 have shown the smallest average mass of pupae along with high frequencies of pre-pupae and larvae to adult mortalities. The results strongly suggest that antibiosis is one of the resistance mechanisms to A. argillacea in that two cotton genotypes.

Effects of storage time on incubating egg gas pressure, thyroid hormones, and corticosterone levels in embryos and on their hatching parameters

Incubating eggs (1,800 total) produced by a commercial flock of Cobb broiler breeders were used to determine the effects of storage duration (3 and 18 d) on gas partial pressure, thyroid hormones, and hatching parameters. Partial pressure of oxygen (pO2) and carbon dioxide (pCO2) were measured on d 18 and at internal pipping (IP) during incubation. Blood samples were collected for determination of triiodothyronine (T3), thyroxine (T4), and corticosterone concentrations in the embryos at IP and in newly hatched chicks. From 464 to 510 h of incubation, eggs were checked individually every 2 h to determine the timing and duration of IP, external pipping (EP), and total hatching time. At 18 d of incubation and at IP, pCO2 was greater in air cell of eggs stored for 3 d compared to those stored for 18 d (P < 0.05), but pO2 was greater in eggs stored for 18 d. At IP, T3 and corticosterone levels were higher in plasma of the embryos of eggs stored for 3 d compared to those stored for 18 d, but it was the reverse in newly hatched chicks (P < 0.05). Embryos from eggs stored for 18 d required more time to complete IP compared to embryos of eggs stored for only 3 d (P < 0.05), whereas the duration of EP was not affected by storage. The overall longer incubation was, however, not only due to prolonged IP but also to later occurrence of IP. It was concluded that prolonged IP as a result of long storage may be related to the late increase in corticosterone level, which may be a necessary stimulus for higher T 3/T4 ratio, late increase in pCO2 level, and decrease in pO2. The effect of long storage was a delay in hatching and a continuous increase in T3 due to higher corticosterone levels between IP and hatching, which may be an indication of the more stressful event of hatching of embryos from eggs stored longer. Differences in pCO2, pO2, T3, T4, and corticosterone levels in the incubating eggs may be manifestations of these changes culminating in altered hatching parameters and consequently differences in chick quality and growth potentials.

Heating time required for an MgO-graphite refractory during a hot modulus of rupture test

In the work described in the present paper, an analytical solution of the general heat conduction equation was employed to assay the temperature profile inside a solid slab which is initially at room temperature and is suddenly plunged into a fluid maintained at a high temperature. The results were then extrapolated to a simulation of a hot modulus of rupture test of typical MgO-graphite refractory samples containing different amounts of graphite in order to evaluate how fast the temperature equilibrates inside the test specimens. Calculations indicated that, depending on the graphite content, the time to full temperature homogenization was in the range of 80 to 200 s. These findings are relevant to the high temperature testing of such refractories in oxidizing conditions in view of the graphite oxidation risks in the proper evaluation of the hot mechanical properties.

Electromyographic fatigue threshold of the biceps brachii: The effect of endurance time

Muscle fatigue can be a limiting factor to determine index as the electromyographic fatigue threshold (EMGFT) due the alterations in motivation and disconfots. This way, the purpose of this study was to identify the right biceps brachii and left biceps brachii obtained from repetitive elbow flexions at each 10% of total time. Nine healthy subjects performed the exercise named biceps curl until exhaustion with 25%, 35%, and 45% of one repetition maximum, in three different days. EMG amplitude (root mean square - RMS) was obtained for concentric contractions during these load levels and correlated with time to determine the slope values for each load and them detemine the EMGFT. The EMGFT was obtained within of each 10% of total time and they were compared by analysis of variance. The results showed a progressive increase in RMS with time, for both muscles in all loads, characterizing the muscle fatigue process, and for the EMGFT values ware not found predominantly significant differences between the execution time, as well as between muscles (right biceps × left biceps). This protocol allowed to identify the EMGFT to both muscles during the biceps curl, which was similar at different percentage of total time, indicating the possibility to reduce the length of the contraction test without the need to maintain the contraction until exhaustion. Further studies are needed to evaluate the applicability of this method to determining the effects on performance.

Real time orbit determination using GPS navigation solution

This work analyses a real time orbit estimator using the raw navigation solution provided by GPS receivers. The estimation algorithm considers a Kalman filter with a rather simple orbit dynamic model and random walk modeling of the receiver clock bias and drift. Using the Topex/Poseidon satellite as test bed, characteristics of model truncation, sampling rates and degradation of the GPS receiver (Selective Availability) were analysed. Copyright © 2007 by ABCM.

Efficacy of topical permethrin as repellent against aedes aegypti's bites

Mosquitoes are the most important vectors of infectious diseases and their bites are related to several adverse skin reactions. Permethrin impregnated clothes are an efficient strategy against arthropods' bites; however, its topical efficacy as a repellent has not been well established. We studied the response to permethrin lotion 5 percent and N,N-Diethyl-meta-toluamide (DEET) spray 50 percent applied to the unprotected forearms of 10 volunteers. Each arm was exposed to 20 female mosquitoes of Aedes aegypti. We performed 71 bilateral comparative measurements evaluating the timing for the first bites. The average times for the arm without the product, with permethrin 5 percent, and with DEET 50 percent were: 7.9 seconds, 336.2 seconds and 7512.1 seconds. The results showed a significant difference between repellency times between either product and unprotected controls. In addition, there was a significant difference in time to first bite between permethrin and DEET treated arms (p<0.01). Permethrin affords some repellent activity against Aedes aegypti bites in this experimental setting. However, permethrin's profile of repellency was significantly inferior to that of DEET. © 2008 Dermatology Online Journal.

Preliminary Overview of the Economies of Latin America and the Caribbean 2011

Incluye Bibliografía

Economic growth with equity: challenges for Latin America

Includes bibliography

Uso do regulador de crescimento etil-trinexapac em arroz de terras altas

This work was developed with the objective of evaluating the use of trinexapac-ethyl doses (0, 75, 150, 225 and 300 g of the a.i. ha -1) and application times (active tillering, between active tillering and floral differentiation and at floral differentiation) in upland rice crop development and yield. The experiment was carried out in Selvíria-MS, during the agricultural year of 2006/07. Application of 150 g ha -1 of trinexapac-ethyl in Primavera rice cultivar at panicle initiation differentiation reduces plants height, 0.40 m on average comparing to other times, with lodging absence. Trinexapac-ethyl promotes lange number of abnormal grains, reduction of grain yields in doses above 150 g ha -1, when applied in panicle initiation differentiation stadium. Application of 150 g ha -1 of trinexapac-ethyl at any time does not interfere in crop yield.

Ageing, solidarity and social protection in Latin America and the Caribbean: time for progress towards equality

Includes bibliography

Women's contribution to equality in Latin America and the Caribbean

Includes bibliography

Robust and fast vowel recognition using optimum-path forest

The applications of Automatic Vowel Recognition (AVR), which is a sub-part of fundamental importance in most of the speech processing systems, vary from automatic interpretation of spoken language to biometrics. State-of-the-art systems for AVR are based on traditional machine learning models such as Artificial Neural Networks (ANNs) and Support Vector Machines (SVMs), however, such classifiers can not deal with efficiency and effectiveness at the same time, existing a gap to be explored when real-time processing is required. In this work, we present an algorithm for AVR based on the Optimum-Path Forest (OPF), which is an emergent pattern recognition technique recently introduced in literature. Adopting a supervised training procedure and using speech tags from two public datasets, we observed that OPF has outperformed ANNs, SVMs, plus other classifiers, in terms of training time and accuracy. ©2010 IEEE.