863 resultados para Avaliação de performance
Resumo:
In this work it is assessed the performance of Portland cement-based mortar to the grouting of type II ceramic plates with the addition of unusable tire rubber powder. It is presented a bibliographical review about the subject in which is done the theoretical and methodological foundation of the whole investigative process. The analyzed universe comprises a sample of mortar to the grouting of conventional ceramic plates type II (reference sample) and five more samples to the grouting of ceramic plates type II, which were made up of the addition of unusable tire rubber powder in the respective proportion (in mass) of 4%, 8%, 12%, 16% and 20%. These mortar samples were subject to the trials of determination of the consistency index (Brazilian Standard NBR 13276:2005), water retention ( Brazilian Standard NBR 14992 Attachment B:2003), permeability in 240 minutes (Brazilian Standard NBR 14992 Attachment G:2003), absorption of water by immersion (Brazilian Standard NBR 9781:2013), resistance to compression (Brazilian Standard NBR14992 Attachment D: 2003), resistance to traction in the flexion (Brazilian Standard NBR 13279:2005), resistance of traction adherence (Brazilian Standard NBR 14081 part 4:2012) and hardened mass density (Brazilian Standard NBR 13280: 2005). It has been found out from the analyzes of the results in the trial the following situation: the reference mortar used met the established requirements in the norms of specifications corresponding to only six from the eight parameters assessed in the research; the mortar with addition of 4,0% of tire rubber powder met the established requirements corresponding to only the resistance to compression and the resistance of adherence to traction. Thus, the other kinds of mortar with addition of 8,0 %, 12,0 %, 16,0 % and 20,0 % of tire rubber powder met the requirements of specifications corresponding to only the resistance to compression and the resistance of adherence to traction. This result concludes that the adding of tire rubber powder does not grant improvement to the mortar of type II grouting to the laying of ceramic plates.
Resumo:
The uncontrolled disposal of wastewaters containing phenolic compounds by the industry has caused irreversible damage to the environment. Because of this, it is now mandatory to develop new methods to treat these effluents before they are disposed of. One of the most promising and low cost approaches is the degradation of phenolic compounds via photocatalysis. This work, in particular, has as the main goal, the customization of a bench scale photoreactor and the preparation of catalysts via utilization of char originated from the fast pyrolysis of sewage sludge. The experiments were carried out at constant temperature (50°C) under oxygen (410, 515, 650 and 750 ml min-1). The reaction took place in the liquid phase (3.4 liters), where the catalyst concentration was 1g L-1 and the initial concentration of phenol was 500 mg L-1 and the reaction time was set to 3 hours. A 400 W lamp was adapted to the reactor. The flow of oxygen was optimized to 650 ml min-1. The pH of the liquid and the nature of the catalyst (acidified and calcined palygorskite, palygorskite impregnated with 3.8% Fe and the pyrolysis char) were investigated. The catalytic materials were characterized by XRD, XRF, and BET. In the process of photocatalytic degradation of phenol, the results showed that the pH has a significant influence on the phenol conversion, with best results for pH equal to 5.5. The phenol conversion ranged from 51.78% for the char sewage sludge to 58.02% (for palygorskite acidified calcined). Liquid samples analyzed by liquid chromatography and the following compounds were identified: hydroquinone, catechol and maleic acid. A mechanism of the reaction was proposed, whereas the phenol is transformed into the homogeneous phase and the others react on the catalyst surface. For the latter, the Langmuir-Hinshelwood model was applied, whose mass balances led to a system of differential equations and these were solved using numerical methods in order to get estimates for the kinetic and adsorption parameters. The model was adjusted satisfactorily to the experimental results. From the proposed mechanism and the operating conditions used in this study, the most favored step, regardless of the catalyst, was the acid group (originated from quinone compounds), being transformed into CO2 and water, whose rate constant k4 presented value of 0.578 mol L-1 min-1 for acidified calcined palygorskite, 0.472 mol L-1 min-1 for Fe2O3/palygorskite and 1.276 mol L-1 min-1 for the sludge to char, the latter being the best catalyst for mineralization of acid to CO2 and water. The quinones were adsorbed to the acidic sites of the calcined palygorskite and Fe2O3/palygorskite whose adsorption constants were similar (~ 4.45 L mol-1) and higher than that of the sewage sludge char (3.77 L mol-1).
Resumo:
The uncontrolled disposal of wastewaters containing phenolic compounds by the industry has caused irreversible damage to the environment. Because of this, it is now mandatory to develop new methods to treat these effluents before they are disposed of. One of the most promising and low cost approaches is the degradation of phenolic compounds via photocatalysis. This work, in particular, has as the main goal, the customization of a bench scale photoreactor and the preparation of catalysts via utilization of char originated from the fast pyrolysis of sewage sludge. The experiments were carried out at constant temperature (50°C) under oxygen (410, 515, 650 and 750 ml min-1). The reaction took place in the liquid phase (3.4 liters), where the catalyst concentration was 1g L-1 and the initial concentration of phenol was 500 mg L-1 and the reaction time was set to 3 hours. A 400 W lamp was adapted to the reactor. The flow of oxygen was optimized to 650 ml min-1. The pH of the liquid and the nature of the catalyst (acidified and calcined palygorskite, palygorskite impregnated with 3.8% Fe and the pyrolysis char) were investigated. The catalytic materials were characterized by XRD, XRF, and BET. In the process of photocatalytic degradation of phenol, the results showed that the pH has a significant influence on the phenol conversion, with best results for pH equal to 5.5. The phenol conversion ranged from 51.78% for the char sewage sludge to 58.02% (for palygorskite acidified calcined). Liquid samples analyzed by liquid chromatography and the following compounds were identified: hydroquinone, catechol and maleic acid. A mechanism of the reaction was proposed, whereas the phenol is transformed into the homogeneous phase and the others react on the catalyst surface. For the latter, the Langmuir-Hinshelwood model was applied, whose mass balances led to a system of differential equations and these were solved using numerical methods in order to get estimates for the kinetic and adsorption parameters. The model was adjusted satisfactorily to the experimental results. From the proposed mechanism and the operating conditions used in this study, the most favored step, regardless of the catalyst, was the acid group (originated from quinone compounds), being transformed into CO2 and water, whose rate constant k4 presented value of 0.578 mol L-1 min-1 for acidified calcined palygorskite, 0.472 mol L-1 min-1 for Fe2O3/palygorskite and 1.276 mol L-1 min-1 for the sludge to char, the latter being the best catalyst for mineralization of acid to CO2 and water. The quinones were adsorbed to the acidic sites of the calcined palygorskite and Fe2O3/palygorskite whose adsorption constants were similar (~ 4.45 L mol-1) and higher than that of the sewage sludge char (3.77 L mol-1).
Resumo:
This paper evaluate the performance of a Wastewater Treatment Plant (WWTP) in sequential batch activated sludge modality with tertiary treatment step, located in high temperature region. It also presents the analysis of organic matter’s removal and the evaluation of sludge sedimentation conditions through reactors in bench scale, fed with different substrate’s and biomass’ concentrations, from the WWTP in study. The results showed high efficiency and stability of the treatment process using Sequential Batch Reactors for domestic sewage, even with sudden changes of organic and hydraulic load, reaching more than 90% of efficiency in the removal of biodegradable organic matter. The removal of organic matter and sedimentation tests in bench reactors showed the good performance in respect of the organic matter’s removal, however, the high concentration of micro-organism results in a lower sludge sedimentation rate, which can compromise the quality of the final effluent. The relation Food/Microorganism in the conditions of the WWTP’s current operation showed a value of 0.06 gCOD/gVSS.d. and zonal sedimentation velocity of 0.59 m/h, the great ratio of the concentration of the substrate by biomass concentration, which obtained the maximum operational efficiency, showed a value of 0.09 gCOD/gVSS.d. and zonal sedimentation velocity of 1.4 m/h.
Resumo:
This paper evaluate the performance of a Wastewater Treatment Plant (WWTP) in sequential batch activated sludge modality with tertiary treatment step, located in high temperature region. It also presents the analysis of organic matter’s removal and the evaluation of sludge sedimentation conditions through reactors in bench scale, fed with different substrate’s and biomass’ concentrations, from the WWTP in study. The results showed high efficiency and stability of the treatment process using Sequential Batch Reactors for domestic sewage, even with sudden changes of organic and hydraulic load, reaching more than 90% of efficiency in the removal of biodegradable organic matter. The removal of organic matter and sedimentation tests in bench reactors showed the good performance in respect of the organic matter’s removal, however, the high concentration of micro-organism results in a lower sludge sedimentation rate, which can compromise the quality of the final effluent. The relation Food/Microorganism in the conditions of the WWTP’s current operation showed a value of 0.06 gCOD/gVSS.d. and zonal sedimentation velocity of 0.59 m/h, the great ratio of the concentration of the substrate by biomass concentration, which obtained the maximum operational efficiency, showed a value of 0.09 gCOD/gVSS.d. and zonal sedimentation velocity of 1.4 m/h.
Resumo:
The fast growth of the elderly population is a reality throughout the world and has become one of the greatest challenges for contemporary public health. When considering the increased life expectancy and the aging as a multidimensional phenomenon, one should highlight the need to investigate if the increase of longevity is associated with satisfactory levels of Quality of Life (QOL). This study has the objective of assessing the QOL of elderly people from the Paraíba’s Western Curimataú microregion, explained by its health and living conditions. This is a cross-sectional and observational study with quantitative design held with 444 elderly people from five cities: Barra de Santa Rosa, Cuité, Nova Floresta, Remígio e Sossego. In order to obtain information, the following instruments were used: I) Questionnaire for collection data related to the elderly population, for sociodemographic, clinical and behavioral characteristics; and II) WHOQOL-Old questionnaire, with a view to measuring and assessing QOL. Data were processed on the IBM-SPSS Statistics 20.0 software by means of the ANOVA (one-way), Student’s t, Mann-Whitney, Kruskal-Wallis and Pearson’s correlation tests, with p-values<0,05 accepted as being statistically significant. The results indicate a good global QOL (ETT=65,69%), with better assessment by elderly men, aged between 60 and 74 years, married, living with partner and children, without caregiver, physical activity practitioners, with up to one health problem before an aspect of multimorbidity and with very good and/or good assessment of basic needs. The self-reported stress showed a negative significant correlation before the global QOL, where the greater the perception of stress, the worse the assessment of QOL. In the faceted assessment of QOL, the Sensory Operation showed the best performance (ETF= 68,86%) and the Social Participation (SP) the worst (ETF=60,37%). In the multiple linear regression model, SP is singly responsible for 51,8% (R2=0,518) of explanation of the global QOL. In the intercorrelation among the WHOQOL-Old facets, only Death and Dying did not reveal significance. The harmony highlighted among the facets raises the need to ensure a comprehensive health care for the elderly population, especially in understanding the social participation as an intrinsic part of the QOL and that it requires the re-discussion and reconstruction of individual and collective, family and community, political and government actions. Hence, guaranteeing an active, healthy and participatory aging, with QOL, is the major challenge.
Resumo:
The fast growth of the elderly population is a reality throughout the world and has become one of the greatest challenges for contemporary public health. When considering the increased life expectancy and the aging as a multidimensional phenomenon, one should highlight the need to investigate if the increase of longevity is associated with satisfactory levels of Quality of Life (QOL). This study has the objective of assessing the QOL of elderly people from the Paraíba’s Western Curimataú microregion, explained by its health and living conditions. This is a cross-sectional and observational study with quantitative design held with 444 elderly people from five cities: Barra de Santa Rosa, Cuité, Nova Floresta, Remígio e Sossego. In order to obtain information, the following instruments were used: I) Questionnaire for collection data related to the elderly population, for sociodemographic, clinical and behavioral characteristics; and II) WHOQOL-Old questionnaire, with a view to measuring and assessing QOL. Data were processed on the IBM-SPSS Statistics 20.0 software by means of the ANOVA (one-way), Student’s t, Mann-Whitney, Kruskal-Wallis and Pearson’s correlation tests, with p-values<0,05 accepted as being statistically significant. The results indicate a good global QOL (ETT=65,69%), with better assessment by elderly men, aged between 60 and 74 years, married, living with partner and children, without caregiver, physical activity practitioners, with up to one health problem before an aspect of multimorbidity and with very good and/or good assessment of basic needs. The self-reported stress showed a negative significant correlation before the global QOL, where the greater the perception of stress, the worse the assessment of QOL. In the faceted assessment of QOL, the Sensory Operation showed the best performance (ETF= 68,86%) and the Social Participation (SP) the worst (ETF=60,37%). In the multiple linear regression model, SP is singly responsible for 51,8% (R2=0,518) of explanation of the global QOL. In the intercorrelation among the WHOQOL-Old facets, only Death and Dying did not reveal significance. The harmony highlighted among the facets raises the need to ensure a comprehensive health care for the elderly population, especially in understanding the social participation as an intrinsic part of the QOL and that it requires the re-discussion and reconstruction of individual and collective, family and community, political and government actions. Hence, guaranteeing an active, healthy and participatory aging, with QOL, is the major challenge.
Resumo:
The aim of this study was to propose a Performance Evaluation System for outsourced employees of the University Restaurant of the Federal University of Rio Grande do Norte to supply the lack of evaluative instruments. According to Provision of Services Contract nº050/2010 and nº055/2011 of FURN with SAFE LOCAÇÃO DE MÃO DE OBRA LTDA ME, it is the hired company to promote periodic functional performance evaluation of the outsourced employees, but this is not done. The performance evaluation process serves to evaluate if the employees are making their tasks according to the organizations’ objectives and goals, besides that helps to find service failures and capacity of employees demands, thus contributing to improve work conditions and the global performance of the organizations. To elaborate the proposal of evaluation, it was chosen an action research with the participation of all stakeholders, employees and managers from UR. On data collect, first, outsourced employees and management servers were interviewed, in order to raise existing perceptions about performance evaluation aspects. From these data and the work routine observation, a proposal of performance evaluation was elaborated, that was appreciated, criticized and adjusted by the actors involved (employees and managers) to the final formulation of the instrument. This study also presents the necessary steps to the implementation of the Performance Evaluation System. The proposed Performance Evaluation System can be applied to the FURN assuming this process, after modification of contract terms and the approval by the ADCON. It also can serve as an example to others units that works with the provision of outsourced services, enabling so the performance evaluation to be part of the management policy of all people working in FURN.
Resumo:
This thesis investigates the voting behavior of the fractions of the new working class in Rio Grande do Norte, more specifically in the cities of Natal, Mossoró and Caicó, from the presidential election of 2014. This research examined the ideology, the evaluation of government and guidance the vote of a portion of the working classes of RN voters. In Brazil, from 2003, socio-economic change has occurred perceptibly, especially in a part of the working classes who ascended socially and switched to the "C economic class." Thus, there was this period, a significant expansion of this social stratum. The expansion of the "class C" in the past decade in Brazil raised the academic debate and in the media about the emergence of a "new middle class". Neri (2008) termed the "class C" of the "new middle class" and that will be the central part of their studies. But the debate on the "new middle class" can not be simplistic to the point of considering that social mobility, the main variable income, entered this segment of the population in the middle class, because it has different specificities of the popular classes. To understand this phenomenon, the income variable was outdated, adding the importance of ownership of the means of production, control of labor power and the symbolic values in the division of social classes resulting in three fractions of the new working class: the management positions, non-heads and small fighters. In this study, using as a complement to the sociological approach (ideologies and social classes) and the performance evaluation was identified that the new working class (heads) mainly reproduced the ideological and political positioning of the middle class, resulting in the rejection of PT governments (2003-2014) and it’s social, compensatory and redistributive policies. From what has been seen, the new working class (chiefs) approaches the ideological and political behavior of the middle class that will reflect in their electoral choices and class interests. The new working class (not heads and small fighters who voted in the situation) because of its classist and ideological interests approached the Workers' Party positively evaluating the Lula-Dilma governments (2003-2014) due to the implementation of compensatory policies, and redistributive programs government turned to the popular classes. In a counterpoint, the voters of the new working class (not heads and small fighters) who voted null, reproduced the discourse of mainstream media and the middle class about the rejection of compensatory policies, redistribution and government programs of Lula-Dilma governments, and consequently they disapproved of the government Dilma and her candidacy.
Resumo:
An amperometric FIA method for nitrite quantification based on nitrite electroreduction and employing a carbon paste electrode (CPE) chemically modified with iron hexacyanoferrate (HCF) as an amperometric detector was developed. The influence of experimental conditions on the preparation of the electrode materials was evaluated and the materials obtained in each study were used for the development of modified electrodes. The electrochemical sensors were prepared by a fast, simple, and inexpensive procedure, and the long-term performance of the electrodes were quite satisfactory as the stability was maintained over one year. HCF was an effective redox mediator for nitrite electroreduction in acidic media, allowing nitrite detection at +0.2 V vs. Ag/AgClsat, which is a potential free of possible interfering species that are normally present in food and water samples. The electrochemical cell used in the FIA system was similar to a batch injection analysis cell, enabling recirculation of the carrier solution. This is an attractive feature because it allows the use of a high flow rate (6 mL min-1) leading to high sensitivity and analysis speed, while keeping reagent consumption low. The proposed method had a detection limit of 9 μmol L-1 and was successfully employed for nitrite quantification in spiked water and sausage samples. The obtained results were in good agreement with those provided by the spectrophotometric official method. At a 95 % confidence level it was not observed statistical differences neither in nitrite content nor in the precision provided by both methods. The experimental conditions for the synthesis of HCF were optimized and the best electrode material was prepared by mixing FeCl3, K4[Fe(CN)6] and carbon powder subjected to an acid and thermal treatment (400 ºC), followed by ultrasonic agitation at 4 °C. This material was used to construct an electrode with improved analytical performance to reduce nitrite, which presented greater stability compared to HCF film electrodeposited on the EPC, showing that the preparation procedure of the electrode material is an effective strategy for the development of HCF modified electrodes.
Resumo:
The present work analyzed the tribological behavior of coatings/surface modifications traditionally used in cold rolling mill rolls and new coatings/surface modificationswith potential to replace the carcinogenic hard chrome. The study started with identification of wear mechanisms occurring in real coldrollingmill rolls. Due the high cost and dimensions of the rolls, thereplication technique was used. Replicas were obtained from 4 different rolling millBrazilian companies before and after a normal rolling campaign. Initial sliding tests were conducted using spherical and cylindrical counter bodies in order to verifywhichtribological conditions allowed to reproduce the wear mechanisms found in the replicas. These tests indicated the use of reciprocating sliding tests with cylindrical counter bodies (line contact), normal load of 100 N, and test times of and 1 h and 5 h. Different surface modifications were carried out on samples produced from a fragment of a rolling mill roll. The specimens were heat treated and ground on both sides. After, some specimens were surface textured by electrical discharge texturing (EDT). For both groups (ground and EDT), subsequent treatments of chromium plating, electroless NiP coating and plasma nitriding were carried out. The results of the reciprocating tests showed that specimens with electroless NiP coating presented the lowest friction coefficients, while plasma nitrided specimens showed the highest. In general, previous surface texturing before the coating/surface modification increased the wear of the counter bodies. Oneexceptionwas for EDT with subsequent electroless NiP coating, which presented the lowest counter bodies wear rate. The samples withelectroless NiP coating promoted a tribolayer consisting of Nickel, Phosphorus and Oxygen on both the specimens andthecounter bodies, which was apparently responsible for the reduction of friction coefficient and wear rate. The increase of the test time reduced the wear rate of the samples, apparently due the stability of the tribolayers formed, except for the nitrided samples. For the textured specimens, NiP coating showed the best performance in maintaining the surface topography of the specimens after the sliding tests.
Resumo:
The theoretical and experimental developments in the biomaterials area have been directly applied to different fields of Medicine (odontology, regenerative medicine and radiotherapy). These advances have focused both for diagnosing diseases such as for quantifying degrees of progression. From the perspective of these studies, biomaterials are being designed and manufactured for application in various areas of science, provided advances in diagnostic radiology, radiotherapy dosimetry and calibration of radiotherapy equipment. Develop a phantom from a biomaterial has become a great ally of medicine in the treat patients with oncological diseases, allowing better performance of the equipment in order to reduce damage to healthy tissue due to excessive exposure to radiation. This work used polymers: chitosan and gelatin, for making the polymeric structures and controlled for different types of production and processing, characterizing and evaluating the biopolymer by physical techniques (STL, SEM and DEI) and therefore analyze applicability as phantom mouse lung. It was possible to evaluate the morphology of biomaterials quantitatively by scanning electron microscopy associated with imaging technique. The relevance of this work focuses on developing a phantom from polymeric biomaterials that can act as phantom providing high image contrast when subjected to analysis. Thus, the choice of DEI technique is satisfactory since it is an imaging technique of X-ray high resolution. The images obtained by DEI have shown the details of the internal microstructure of the biomaterial produced which have ≈ 10 μm dimension. The phantoms had made density ranging from 0.08 a 0.13 g/cm3.
Resumo:
The aim of this study was to investigate possible alterations in attentive functions and mental flexibility in individuals diagnosed with Addiction. The sample (n=40) was located for convenience, and included 20 individuals with addiction behaviors (G1), and 20 individuals who do not use harmfully psychoactive substances (G2). Assessment instruments used were: Experimental and Computerized Test of Continuous Performance, and the Wisconsin Card Sorting Test. It was concluded that individuals in the G1 group had a poorer performance in all categories analyzed on the Wisconsin Card Sorting Test and in reaction time on the Experimental and Computerized Test (p<0,05), showing a deficit in mental flexibility and attentive functions, which may have direct implications on addictive behaviors and treatment.
Resumo:
In several areas of health professionals (pediatricians, nutritionists, orthopedists, endocrinologists, dentists, etc.) are used in the assessment of bone age to diagnose growth disorders in children. Through interviews with specialists in diagnostic imaging and research done in the literature, we identified the TW method - Tanner and Whitehouse as the most efficient. Even achieving better results than other methods, it is still not the most used, due to the complexity of their use. This work presents the possibility of automation of this method and therefore that its use more widespread. Also in this work, they are met two important steps in the evaluation of bone age, identification and classification of regions of interest. Even in the radiography in which the positioning of the hands were not suitable for TW method, the identification algorithm of the fingers showed good results. As the use AAM - Active Appearance Models showed good results in the identification of regions of interest even in radiographs with high contrast and brightness variation. It has been shown through appearance, good results in the classification of the epiphysis in their stages of development, being chosen the average epiphysis finger III (middle) to show the performance. The final results show an average percentage of 90% hit and misclassified, it was found that the error went away just one stage of the correct stage.
Resumo:
Desde as últimas décadas do século XX que, perante um cenário marcado pela complexidade de uma economia globalizada, a Administração Pública tem sido coagida a passar por processos de reforma. As referências à reestruturação da Administração Pública por motivos políticos, económicos e financeiros, são frequentes na literatura, e surgem, quase sempre, num discurso imperativo. Neste contexto, foram introduzidos mecanismos de mercado por se acreditar que estes produzem soluções mais eficazes para o cidadão-cliente, uma administração motivadora, para quantos nela trabalham, e eficiência económica. Na esfera pública, mais do que transformar inputs em outputs, importa, avaliar os outcomes, isto é, o impacto sobre o valor público. Inúmeros estudos concorreram para enquadrar e justificar a reforma do sector público. Continuam, porém, a faltar respostas de como compatibilizar a gestão orçamental com práticas ideológicas das organizações, nomeadamente ao nível da gestão de recursos humanos. Este estudo tem como objectivo central contribuir para um melhor conhecimento dos efeitos que a prática da avaliação do desempenho, em vigor na Administração Pública Portuguesa, tem no contrato psicológico dos colaboradores. Para o teste das hipóteses propusemos um modelo de investigação, tomando como referência a teoria de Guest. Com uma abordagem qualitativa, construímos um inquérito por questionário, que foi aplicado a alguns colaboradores de uma Instituição pública. Os dados recolhidos permitiram a elaboração de quadros de referência de resultados que, por meio da análise de conteúdo, nos possibilitou tirar ilações acerca do comprometimento organizacional e comportamentos de cidadania organizacional dos Colaboradores. Trata-se de uma pesquisa com características exploratórias que, acreditamos, possa ser a base para trabalhos futuros sobre os efeitos do SIADAP nos indivíduos e nas organizações. Os resultados mostram que o sentimento de que a organização não cumpriu os termos do contrato psicológico é moderado por um esforço emocional, que mantém o colaborador na organização, evidenciando, ainda, um comprometimento afectivo com a Instituição e comportamentos de virtude cívica. / Since the last decades of the 20th century, in a scenario marked by the complexity of a globalized economy, the Public Administration has been forced to undergo reform processes. References to the restructuring of the Public Administration for political, economical and financial reasons are frequent in literature, and arise, in most cases, in an imperative tone. In this context, market mechanisms were introduced, as it is believed that they produce more efficient solutions for the citizen-client, motivated administration for whom many work, and economic efficiency. In the public sphere, more than just transforming inputs into outputs, it is important to evaluate the outcomes, that is, the impact on the public value. Numerous studies have contributed to contextualize and justify the public sector reform. However, there are still no answers of how to develop compatibility between the budgetary management and the ideological practices of the organizations, namely on the level of human resource management. The main aim of this study is to contribute to a better knowledge of the effects that the practice of performance appraisal, in force in the Portuguese Public Administration, has on the employee's psychological contract. For this hypothesis test, we proposed a research model, with reference to Guest's theory. With a qualitative approach, we constructed a survey questionnaire that was applied to some employees of a Public Institution. The data gathered allowed the elaboration of results frameworks which, by means of the content analysis, enabled us to draw conclusions of the employees' organizational commitment and organizational citizenship behaviour. It is a research with exploratory characteristics, which we believe, may provide the basis for future work on the effects of the SIADAP on individuals and organizations. The results indicate that the feeling that the organization did not fulfil the psychological contract terms is moderated by an emotional effort, which leads the employee to remain in the organization, also showing an affective commitment to the institution and civic virtue behaviours.